cutter k g used for sale

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

Sound-insulated generator with Perkins diesel engine Power: 60 kVA Year: 2020 Operating hours: None Generator: Stamford / AvK S1L2Y1 Voltage: 400/231 V, 50 Hz Cooling: Water Tank: 175 litres Control panel: Manual and automatic operation with ComAp AMF9 generator circuit breaker, socket distribution Subject to prior sale - errors possible Internal reference number: E-1004-55

Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg

Palletizing system for trays or similar products.

sheet width: 2050 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 4 kW weight of the machine ca.: 1550 kg range L-W-H: 2,5 x 1,57 x 1,21 m Electric 380 Volt: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and ...

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic LAN Kabel CAT.7 4 x 2 x 23AWG -Type: STP/SH PiMF 600 Art. 2170614 -Length: 244 m -Price: complete -Dimensions roll: Ø 550 x 350 mm -Weight: 22 kg

Number of spindles: 6 St. Working width: 250 mm Working height: 150 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. weight: 4770 kg Dimensions (L/W/H): 4722x1860x1776 mm Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Anzahl der Spindeln: 6 Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turntable, slewing ring -Outer diameter: below 650 mm -Inside diameter: above 460 mm -Height: 52 mm -Load capacity: 2500 kg -Number: 2x available -Price: per piece -Weight: 23 kg

Pile cutter with automatic paper pressing, 48cm cutting width .1 spare knives and cutting bars

fuse base -Type: S27 -Price/Sale: complete -Quantity: 4 pieces -Weight: 4.8 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg

x-travel: 970 mm y-travel: 420 mm z-travel: 430 mm Control: Heidenhain TNC 135 number of speeds: 12 speeds: 31,5-1400 U/min feed range lengthways and crosswise: 8-2000 mm/min feed range - vertical: 4-1000 mm/min rapid traverse longitudinal and cross: 4 m/min rapid traverse Z-axis: 2 m/min weight of the machine ca.: ca. 3,8 t dimensions: ca. 3050x2350x2320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Product number: 2644J Type: VM400HD Belt width: 400 mm Capacity: max 50 strokes/min. Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 2150 x 800 x 2250 mm Weight: 820 kg

Wire electrode, welding wire, welding wire -Manufacturer: Kaynak -Type: AS SG3 Ø 1.20 mm -Price: per piece Quantity: 2 pieces -Dimensions: Ø 300/100 mm -Weight of roller: 15 kg

Control of wind turbines, frequency converters, frequency converters, drive converters, controllers, variable speed drives -KEB: Combivert P6 pitch converter -Mat.No .: KEB 19P6H7G-YRXO -Power: 36 kVA -Input: AC 400/480 V 50/60 Hz/DC > 150 V -Dimensions: 1610/350/H645 mm -Weight: 146 kg

Horizontal Käde packaging machine

0: , St. Width: 1000 mm Length: 1720 mm Commission car RU-KWI-S --------------------------------------- The RU-KWI-S is for internal and truck transport. In When unloaded, it can be nested. For forklift and Suitable for crane transport. --------------------------------------- Equipment and accessories: -With a removable crossbeam so that the consignment trolleys are unloaded State can be pushed into each other. -With 4 crane hooks, 4 forklift brackets and 4 lashing strap holders. -Mobile on 4 polyamide swivel castors Ø 150 mm, 2 of which have brakes. -Steering rollers can be removed, so the commission trolley can stand securely on the truck. -Other equipment and accessories as for RU-KWI. --------------------------------------- Technical details RU-KWI-1600S: - Length 1,720mm - Width 1,000mm - Height 1,950mm - System height 1,500 mm - Usable width 700 mm - Weight 85kg The painting is do ...

sheet width - max.: 0100 mm coil weight: 0,150 t coil internal dia.: 320 - 520 mm coil outside - diam. ca.: 1200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - manually adjustable brake - Rear handguard - Restriction ring in front - Movable on frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 4.0 x 350 -Type: KESTRA BLUE -Weight: 4.4 kg

power cable -Telephone cable: 19553 -4-core -Roll dimensions: Ø 800/480 mm -Weight: 34 kg

winch, lifting winch, construction winch, anchor winch -mechanical winch -Holding force: 300 kN -with: freewheel and mechanical brake -Drum: Ø mm -Operation via: hand lever -2x winches available: 1x left, 1x right Price: per piece -Dimensions: 1140/750/H1120 mm -Weight: 760 kg/piece

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: 315 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Bolt circle: Ø 133.4 mm -Weight: 20 kg

Rail support -Type: SAT38/3 Price: per package -3 packages: 5 pieces each -Weight: 1 kg per package

Cable protection ring -Type: KSR-910 Light Grey -Cable protection rings per package: 25 -Packages: 15 pieces -Price: per package -Weight: 3.6 kg

Bezel, setting stick, lynette -for: Crankshaft grinding machine -Technical drawing: see photos Quantity: 1 piece available -Dimensions: 380/85/H200 mm -Weight: 13.4 kg

Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009

Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg

Cross support, cross support, cross table, cross sliding table, cover plate -Manufacturer: Kunzmann, 2 pcs. Cover plates from milling machine type UFV 600 -Price/Sale: complete -Dimensions each: 263/161/H38 mm -Weight: 9.7 kg

Strapping machine, packaging machine, strapping machine, cardboard stapler, stapler, plier stapler -Pneumatic stapling pliers -with: balancer and compressed air hose -adjustable depths: 5 -for staples: 32 mm wide -Dimensions: 390/100 / H210 mm -Total weight: 3.4 kg

NEW Labratory Mill Rolls 170 x 465mm Description attached! Next to this we are able to offer all sizes of Mills from Labratory up to 100" (2500mm) for attractive price! Please ask us!

Transformer, single-phase power transformer -Primary: 400 V -Secondary: 115/230 V, 21.6/10.8 A -Voltage: 2500 VA -Price: per piece -Number: 2 pieces -Dimensions: 320/300/H465 mm -Weight: 35 kg/piece

KHS-KISTERS Innopack SP 060 V panel: Simatic Touch Panel; Control: S7; power supply: 230/400 V, 50 Hz; six-track entrance; shrinking tunnel; oil-based central lubrication of the tunnel and packer; ionization. Automatic felling folli. Support for both transparent and printed film. Automatic film bonding. Possibility of packing in one or two lanes depending on the size of the multi-pack format. Supported packaging: glass/PET/can. Operator panel menu: DE/PL/ENG. In our offer we have both right and left machines. Possibility of individual adjustment of formats to customer needs.

Capacity: 70 Tk/h (single track); year: 2009; panel: Simatic Touch Panel; control: S7-300; Power supply: 400 V, 50 Hz, 11kVa; Possibility of mounting handles in one or two ways. Possibility of attaching handles from a magazine or roll. Support for transparent and laminated film. Operator panel menu: DE/PL/ENG. Possibility of individual adjustment of formats to customer needs.

Automation, PLC, switchgear -Type: KFD2-STC4-Ex1 -Manufacturer Part Number: 122580 -Number: 14x available -Price: per piece -Dimensions: 125/115/H20 mm -Weight: 125 g

Stick electrodes 3.2 x 450 -Type: KESTRA Fe Ti 180 -Price: per package -Number: 3 packages -Weight: 5.9 kg

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m

Stick electrodes 4.0 x 450 -Type: Phoenix K 50 -Price: per package -Number: 5 packages available -Weight per package: 5.8 kg

Three-phase motor, electric motor -Power: 0.66 kW -Speed: 1415 rpm -Shaft: Ø 14 mm -Design: B5 -Protection class: IP 44 -Dimensions: 285/160/H205 mm -Weight: 12 kg

High-intensity cold light lighting system for macroscopic applications, lamps, luminaires, lighting -Handover: in its current condition as inspected -Condition: Sold as a parts donor without light bulbs (without light bulbs) -Case dimensions: 520/220H440 mm -Weight: 16.4 kg

Boiler Lifting Tipper Kemper HK 200 R - Boiler tipper Kemper - Model: HK 200 R - for Kemper 150 AL boiler - with boiler drive and boiler shearer - Built in 2005 - Total height 312cm

BVM Compacta Konti 5015 MY 2005 BVM SC 4030 SD Bj 2005 BVM TB 400 Bj 2007 BVM inlet conveyors

Karl Schnell KS P9 vacuum filling machine, performance max. 3200 kg/h, filling pressure max. 22 bar, portioning size 1 g - 1000 kg, portioning speed max. 700 port./min, hopper cappacity 300 liters

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 25 mm -Piston diameter: 63 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces -Dimensions: 78/80/H80 mm -Weight: 0.75 kg/piece

Double hydraulic pump, oil pump, gear pump -Kracht: gear feed pump -without: drive -with: clutch bell for the drive -Dimensions: 490/250/H345 mm -Weight: 19 kg

cascade separator, vibrating chute, vibrating conveyor, vibrating chute, vibrating chute used Manufacturer: KARL MERZ AUFBEREITUNGSTECHNIK Type: ULA 570/50-650 built: 1987 Gutter approx. 500 x 1000 mm 2 vibrators each 0.84 kW Overall dimensions approx. 1300 x 1300 x 1400 mm e.g. For the separation of granules with shape defects, e.g. angel hair, double granules This cleaner was used for plastic granules. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Gebr. Kemper bread plant, overhauled, with round and long knitting Kemper Superba SU-BR-2500G, 270 cm long round beam, with Kemper BE-13 bucket elevator

Ex signal isolator, isolated barrier -K series -Product number: 14493S -Explosion proof -Number: 5x available -Price: per piece -Dimensions: 95/70/H18 mm -Weight: 0.1 kg

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 685 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 360/230/H250 mm -Weight: 36 kg

Electric motor, three-phase motor -Power: 1.5 kW -Speed: 1430 rpm -Shaft: Ø 22 x 50 mm -Construction: B5 -Dimensions: 315/200/H240 mm -Weight: 16.2 kg