cutter k g used for sale

Wood router bit, router head, router tool, wood router bit, profile router bit -AKE wood router bit with: AKE Hydro-Grip -Outer diameter: 165 mm -Height: 60 mm -Hole: Ø 40 mm -Cutter: 1 -Price/Sale: complete -Weight: 8 kg

Four-sided planer with tools 7 chillers

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Number: 1x prism -Price: complete -Dimensions: 200/171/H92 mm -Weight: 12 kg

120 m pallet rack Galler New & used goods very good condition, see pictures. Height 5 m Depth 110 cm, blue Capacity 12 tons Beam length 2.95 m yellow Carrier with ballast /compartment 2550 kg Negotiation price: € 14.990,-- net from stock Offer consists of: + 41 pcs. frame pre-assembled, depth 110 cm, height 5 m +240 pcs. beam, length 2.95 m, 2550 kg ballast/compartment +480 pcs. Suspension locks + 82 pcs. concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as prior sale res ...

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Dimensions: 153/76/H132 mm -Weight: 6 kg

Key data: 2 mm

Strip width 1,500 mm, strip thickness 0.5-2.0 mm, number of straightening rollers 6 pcs., feed rollers 2 pcs., coil weight 3,000/ 5.000 kg., longitudinal shears 4 cutting heads manually adjustable, min. width 100 mm electric control new, Hasp can be used as both an unwinding and rewinding reel. Appendix cpl. Outdated, i.e. new.

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate -Dimensions: 151/78/H132 mm -Weight: 6.2 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg

Saw blade, wood saw blade, circular saw blade -Ø 290 x 2.4/3.0 x 60 -Z 54 -n max. 6500 -Price: per piece -Number: 10x available -Weight: 2.5 kg/piece

Siphon for wash basin, space-saving siphon -Number: 7x available -Price: per piece -Weight: 0.25 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg

Specifications: -working width 230 mm -feeding speed 5-25 m/min. -working height 130 mm -number of spindles 9 -configuration down-right-left-right-up-down-left-up-down -total power about 45 kW -

Ref. 468 • Heidelberg GTO 46 N+P • Year of construction 1986 # • Serial: 687883 • Size: 33 x 46 cm • Humidification: Aquatron • Including indentation mechanism and perforation • 4 sets of numbers • Tested and printed The machine can be viewed in our house. Please make an appointment with us. We specialize in supplying machines for printers of any size, and we are happy to help you.

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm -Weight: 570 kg

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 1320 mm -Length: 3530 mm -Height: 830 mm -Plate thickness: 75 mm -Plate: with support ribs -Groove width: 23 mm -Weight: approx. 3500 kg

GALLUS R 200 • Age: 2001 • Unwind •Rewind • 6 printing units • 5 printing units and one varnishing unit available • 1 flat die-cutter • 2 rotary die-cutters, only one impression cylinder available • 2 hot stamping units, one above the third printing position and another above the flat die-cutter • UV system from Uviterno, air-cooled • Water-cooled cooling tables under the UV lamps still available • Web monitoring system from BST with touchscreen • 166 impression cylinders • 13 magnetic cylinders.

Network, communication, LAN/modems -Type: AT-GS900/16 -Connections: 16 pieces -Weight: 2.5 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Gildemeister lathe -Drive: 1.1 kw -Speed: 1410 rpm -Max. Pressure: 25 bar -Liter output: l/min -Filter -Hydraulic tank -Dimensions: 500/680/H660 mm -Weight: 98 kg

Furniture Door Frame Press V. Grum-Schwensen Type MTP Specifications: • Assembly of frame parts: fully automatic • External frame dimensions min. (mm): 120 x 120 • External frame dimensions max. (mm): 700 x 2500 • Custom size

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Pressure reducer, pressure regulator, pressure gauge -for nitrogen -Inlet pressure: max. 25 bar -Output pressure: 0-1.5 bar adjustable -Quantity: 1x Minor available -Weight: 1.3 kg

Combination with the Intermac CNC Crease Grinder Groove 1500 (no. 23020) - Serial Number: 90147 Weight: 200 kg Power: 0,8 Kw + internal extraction Length mm: 900 Width mm: 1000 Height mm: 1700 Working height: 1200 Transport size L x W x H: 0,9 x 1,0 x 1,7 Number of spindles: 1 spindle Condition machine : Good Control type: Manually Electric. Connection: 16A 3P+N+PE - For more information, please mail us: salestecfort.nl

Console, base body, device, clamping angle, clamping table, clamping cube, clamping plate, clamping tower -Price: per piece -Number: 2x available -Console: as a base for fixtures -Dimensions: 720/350/H910 mm -Weight: 170 kg

Clamping angle for workpiece clamping -Dimensions: 210/160/H200 mm -Clamping width: 40 mm -Surface: milled -Weight: 6 kg

Clamping plate with T slots, plate field, welding table, welding table -Clamping surface width: 250 mm -Clamping surface length: 250 mm -Height: 40 mm -Plate thickness: 60 mm -Hole spacing: 290 mm -Groove width: mm -Dimensions: 330/260/H40 mm -Weight: 11.6 kg

Carbolite Gero AX30 Heating Oven Original price 3185 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 1000 Holding power ...

Carbolite Gero AX30 Heating Oven Original price 3385 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Condition: new, without original packaging  ...

Collet collet sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 27 pieces adapter sleeves -different sizes: 3.5-16 mm -Only for sale as a package -Weight: 4 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Quantity: 21 pieces of collets -Various sizes: 3-25 mm -Price/Sale: complete -Weight: 4.5 kg

Dissolver Agitator Geppert Mischtechnik FRW Power 6.3 kW electric winch Speed range 320-2250 1/min mobile, mobile on castors Very good condition, straight from production

Air bellows, roller bellows, air cushions -Manufacturer: Goodyear -Part-Number: 1R11-700 566222709060000 -Weight: 7 kg

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

brake drum -Bore: conical Ø 27 to 32 mm with keyway -Outer diameter: 220 mm -Inner diameter: 200 mm -Recess: Ø 67 mm -Number: 4 drums available Price: per piece -Weight: 6.5 kg/piece

-WP fully automatic proofing machine Manufacturer: Werner & Pfleiderer Bakery Cooling -Type: GUV -for 4 trolleys -External dimensions approx.: 192x200cm WxD and 255cm high -Inner dimensions approx: 169x140cm and 200cm high -without refrigeration compressor -Refrigerant: R 404A

Spiral spring, steel spring, compression spring -Diameter: Ø 100 mm -Length: 135 mm -Wire thickness: 9 mm -Number: 148x springs available -Price: per piece -Minimum order: 3 pieces -Weight: 0.7 kg/piece

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 1x motors available -Price: per piece -Dimensions: 130/185 mm -Weight: 7 kg/piece

Model: STG 230 GANC Type: SR-230 No. SR-230/070/199 Connection: 3x400V EL Box: ASTP

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from the company GSL (German Standard Lift) -Drive shaft: Ø 25 mm toothed -universally applicable -Number: 9 motors available -Price: per piece -Dimensions: 180/135 mm -Weight: 6.5 kg/piece

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from the company GSL (German Standard Lift) -Drive shaft: Ø 20 mm -universally applicable -Number: 20 motors available -Price: per piece -Dimensions: 245/125 mm -Weight: 14 kg/piece

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from the company GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed - universally applicable -Number: 5x motors available -Price: per piece -Dimensions: 240/175 mm -Weight: 14 kg/piece

Mobile welding fume filters, welding fume extraction, soldering fume extraction -Drive: 2.2 kW -Extraction arm: 3000 mm -Connection: 380 V 50 Hz -Dimensions: 860/1250/H1950 mm -Weight: 122 kg

Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -Manufacturer: OPPOLD -Hole: Ø 40 mm -Price/Sale: complete -Quantity: 1x pallet of tools, various sizes -Weight: 46 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool -different sizes -Weight including pallet: 346 kg

Gral high shear granulator, stainless steel consctruction, 75-liter -shell hopper with vessel scale, side reject with side discharge, stand alone construction for main mixer. This one-pot processor is suitable for effective and fast mixing, granulating and drying in the same container. In explosion-proof version, for wall installation. Batch size: 25-50 Liter
. Temp. in double jacket: 20-85° C. 


Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE140UK-2RS -Number: 3x spherical bearings available -Price: per piece -Weight: 13 kg

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE160UK-2RS -Quantity: 1x spherical bearing available -Price: per piece -Weight: 19 kg

Bosch Demolition Hamer; Mortise hammer GSH 5 CE. 5 Units In Stock