136,310 used machines on RESALE, but how to find them? Machine Search
Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Adjustment: SK50 -Tool holder: M20 -Price: for both recordings -Weight: 16 kg
Carpentry cross-cut saw Gama 65S Cutting height 245 mm SIDE TABLES WITH ALUMINIUM PROFILES OF 3 M EACH LEFT AND RIGHT
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 900 mm -Short taper: 11 -Cone: Ø 196 mm -Hole circle: Ø 235 mm -Through hole: Ø mm -Weight: 238 kg
Universal clamping pad -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamps. -Support height: 72 to 240 mm. -Material: Heat-treated steel, painted. -Scope of delivery: 3 sets of different sizes -Weight: 6.2 kg
Carton stitching machine Speckboetel GFM; good condition; cleaned and tested; longitudinal or transverse stitching; .max. Staple thickness 3mm; Arm length 500mm; suitable for wire 21 and 23. Cardboard wire stitcher Speckboetel GFM; good condition; cleaned and checked; for lenghtwise and cross stitching; max.thikness 3mm; length of arm 500mm; used for wire 21 and 23.
TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck
ATTENTION : The system is currently in operation and can only be purchased AT the END of the year. This is only advertised now in order to find possible interested parties to date. for sale is the central extraction system of a medium-sized company. Extraction volume : 8,33m³/s > approx., 50,000m³/h Power : 37 kW In addition, there are: A fan that sucks in the air Type: DFDG SEE 225S4 Power : 37kW rpm : 1483 Power : 400/690 V Amperage : 65 / 37.5 A Frequency : 50 Hz Ingress protection : IP 55
Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T
Machine type: Pipe drawing machine / line Working area: pipe diameter: 4-40mm, Wall thickness: 0.4-3 mm, Pipe length: 3,000-8,000 mm Speed: 60-80m/min Make: Bültmann Type: Pipe drawing machine type GKZ 080/01-10 Year of construction: 1995 Location: NRW Length 25,660 mm (entire system) Width 6,750 mm (entire system) Country of origin: Germany Delivery time short
Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.75 kW 2810 rpm -Max. flow rate: 9.0 m³/h -Max. pressure: 18 mWS -Quantity: 1 available -Dimensions: 380/225/H565 mm -Weight: 36 kg
Cool Guntner Type: GHN080.2F/210-E Cooling capacity: 54 kW at DT8, 43 kW at DT7 Surface: 235 m2 Air flow: 37 320 m3/h Fin spinning: 10 mm Electric heaters Fans: 2 x 800 mm Dimensions: 4000 x 900 x 1300 mm Refrigerant: Freon Volume: 86.5 l Waga: 460 kg Items in stock: 3 Reference number: CH 392 Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman
ORDER NO. 7089 TECHNICAL SPECIFICATIONS - loading hopper inlet 1020x1230mm - rotor working width 1020mm - rotor diameter 348mm - main motor 22kW, 400V, 50Hz - pump motor 0,75kW - number of knives 50pcs - knife size 35x35x20mm - sieve 12mm - pressure drawer - electric autorewers - dimensions length / width / height 2000x1130x1530mm - weight 970kg ADVANTAGES – autorewers – for WEIMA WL 10 – German production – pressure drawer – very good condition – used chipper, DTR+CE documentation
Three-phase motor, electric motor -Power: 40 kW -Speed: 1455 rpm -Shaft: Ø 60 mm -Construction: B3 -Protection class: IP 23 -Dimensions: 860/640/H580 mm -Weight: 390 kg
Gerstel / CTC Mutlti Purpose Sampler MPS complete For the LC as well as GC YOC 2014, tray for 98 vials (2ml), gas-tight injection syringes
GE Äkta Purifier 10 FPLC System Box 900 P 900 Pump /10 ml pump heads UPC 900 Monitor INV 907 Valve M925 Mixer / 6 ml mixing chamber Conductivity Flow Cell pH Sample CU 950 Interface/Communication Module FRAC 920 Fraction Collector Unicorn Software
Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting -Dimensions: 340/140/H80 mm -Connection: 230 V -Number: 1x light available -Weight: 1.0 kg
Centrifugal fan, dust extraction fan, fan, extraction, dust blower, welding fume extraction -Motor power: 0.37 kW -Speed: 2800 rpm -Connection input: Ø 115 mm -Outlet connection: Ø 115 mm -Impeller: Ø 300 mm - Connection: 400 volts -Dimensions: 400/600/H450 mm -Weight: 21kg
On sale is a complete line for the production of longitudinal and transverse plates. 1. Weinig Dimter high frequency press. 2. Grecon Ultra4 longitudinal line. 3. Line for width connection Obel. 4. Hobelrotoles. 5. Timesavers 1350 mm grinding machine with three units. 6. Planer Schenko (with lifting platform for parcels) + conveyor belt + charger. 7. SLH cold width press. 8. Thermal tunnel for individual packaging of plates. 9. Glue applicator Inles. 10. Glue applicator for slats. 11. Obles line for longitudinal connection of slats.
capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350 x 200 saw band length: 3375 x 27 x 0,9 mm band speed: 18 - 110 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,61 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Key data: 90
A brand-new extrusion recycling product UMAC (EREMA Group) series READYMAC Type 1109 TVE for processing polyethylene (PE), polypropylene (PP), polystyrene (PS), polycarbonate (PC), and polyamide 6 (PA6), with screen changer type SW RF, for processing printed films. Fully equipped. Capacity up to 450 kg/h, electrics 240/400 volts, 50 heart, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
Capacity: 90kg of green coffee per roast ( up to 360kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Weishaupt-idirect The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing modulation of the burner will be installed new paint (powder coating and temperature resistant paint) Inspection of the roaster is possible at any time.
Capacity: 75kg of green coffee per roast ( up to 300kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Probat-direct The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with R3852389 automatic roasting and profililng) new cooling bin sheathing modulation of the burner will be installed new paint (powder coating and temperature resistant paint) Inspection of the roaster is possible at any time.
Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.
Very well preserved CNC lathe WEISSER Heilbronn, type Gigant. From precision operation, only ultra-fine machining. Details Type Gigant Machine No. 27-0166 hydraulically self-tightening fork art chuck with power clamping cylinder 4x Sauter revolver, size 400 mm2 Siemens SINUMERIK 840D fully functional Commissioning 04/2003 Travels X 725 mm (stroke), Z 1,480 mm Main spindle drive DC 45 kW (nominal power) Speeds in 3 stages up to max. 1,120 rpm a set of basic jaws inside/outside without Lynette (but can be provided for customization) incl. documentation
Cavagnino & Gatti labeller Mod. GTC5/2 3XPSPSFGMP Year 2013 minimum length of the labels: 15 mm maximum length of the label: half the circumference of the bottle long/short label length difference: min 5 mm empty space between labels: min 15mm
Cool Guntner Type: S-CPGHN 080.2F/210-AU2/18P. E Fin spinning: 10 mm Fans: 2x800 mm Dimensions: 400x170x140 mm Refrigerant: CO2 Volume: 99.8 l Quantity in stock: 2 Reference number: CH 405 Condition: Used in good condition
Electric motor, three-phase motor -Power: 4 kW -Speed: 1450 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: - -Number: 1x available -Price: per piece -Dimensions: 430/360/H285 mm -Weight: 58 kg
Collet collet sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 6 pieces clamping sleeves -different sizes: 17-25 mm -Drawing with the pictures -Sale: only as a package -Weight: 1.5 kg
Electric motor, three-phase motor -Motor is for a Ehemann grinder -Electric motor with 2 shaft outputs -Voltage: 500 volts -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 -Protection class: - -Dimensions: 540/340/H270 mm -Weight: 50 kg
Metal bellows coupling, claw coupling, connecting coupling, rotary encoder coupling, encoder coupling -Manufacturer: Paguflex -Type: G30 (10 pieces available) -Outer diameter: 46 mm -Inside diameter: 12 mm -Price piece: 18 EUR net -Weight: 0.07 kg
Electric motor, three-phase motor -Power: 15 kW -Speed: 1430 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: - -Dimensions: 650/450/H360 mm -Weight: 158 kg
Drill press, drill press, stand drill, pillar drill -Table size: 500 mm -spindle taper: MK4 -Projection: 400 mm -Speeds: 38-750 rpm -Feed: 0.08-0.13 mm/rev -Columns: Ø 220 mm -Spindle stroke: 235 mm -Transmission: -Dimensions: 640/1020/H2730 mm -Weight: 965 kg
Clamping plate, welding table, welding table, straightening plate, clamping cube, clamping tower, clamping box -Width: 200mm -Length: 503mm -Height: 150mm -Plate thickness: mm -Hole diameter: 26mm -Dimensions: 503/200/H150 mm -Weight: 28kg
Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2005/1500/80 mm -Table height: 800 mm -Plate: solid -Holes: 50 x 50 mm -Cast plate -Vice -Dimensions: 2100/1700/H1030 mm -Weight: approx. 2000 kg
Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt -Thickness: 5.0mm -Width: 100mm -Length: 21,800mm -endless -Number: 1x band available -Weight: 12kg
Offer up to 2 plasma power supplies here. Technical data, as shown in the picture. The devices are 9.5" wide. In some pictures, both are depicted.
Clamping angle for workpiece clamping -Dimensions: 151/391/H191 mm -Thickness: 18 mm -Surface: milled -Weight: 16 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 172 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 80 kg
Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12
maximum number of results exceeded
please refine your search
