129,501 used machines on RESALE, but how to find them? Machine Search
Servomotor, 330V, 4000 rpm, B2.SM.000-4400, KEB, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, - Unfortunately, the packaging is not visually perfect on the outside., - Shaft D11mm, centring D60mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our ...
Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.
KVM 62/80 Pavingstone machine, 2005. Hydraulic Powerpack, KVM PLC Control, Pallet size 900 x 750, Moulds. Machine was shut down in 2010 due to a merger between 2 companies. The machine has only been in operation for 5 years and is in very good condition. PRICE INCLUDES DISMANTLING. Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017
Palletizer robot for palletizing, make Kettner, type: Robogrip, with operating desk, control cabinet in s/s with Siemens Simatic S7 control, built 1999
Palletizer robot for depalletizing, make Kettner, type: Robogrip, with operating desk, control cabinet in s/s with Siemens Simatic S7 control, built 1999
CATALOG NUMBER 6651 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 120mm - 4 spindles: 1) horizontal bottom 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 220mm 5.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from above, 4 introducing rollers, toothed, including 2 double ones - from above, 1 pulling roller, smooth, rubber - rubber, pulling roller at the bottom - pneumatically pressed rollers - feed on cardan shafts - 1.1kW feed motor - 0.37kW lifting motor - electric adjustment of the planing thickness - length of the introductory top 1980mm - side pressure - smooth adjustment of the feed speed 8-16m / min - central lubrication - diameter of the extraction port 5x140mm - locked in the cabin - dimensions length / width / height 3400x1500x1700mm - wei ...
Rated power at 50%ED: 15kVA Short-circuit current: 14.4kA Electrode force: 40-240daN / single stroke Projection: 300mm --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Fully Automated Forging Hammer Line (2023) SCHULER KG H 6.3 B (63 KJ) Line Description The complete line consists of the following machines: Tilting Device, Stahlmann Step Conveyor, Stahlmann Cold conveyor belt Conductive Heating System, Stahlmann, E89, 2023 Transfer Gripper Hot Conveyor Belt with Lifting Device 2 Forging robot, Kuka, KR 30-3F, 2010 Safety Fence with Safety Doors Short-Stroke Die Forging Hammer, Schuler, KG H 6.3 B, 2023 Discharge / Extraction Robot, Kuka, KR 150/2, 2010 Output Station, Stahlmann, 2010 Technical Details (2023) Short-Stroke Die Forging Hammer SCHULER KGH 6.3B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 6.3B Machine number: 119820 Year of manufacture: 2023 Operational parameters Working capacity max. 63 kJ Max. impact frequency 98/min Max. usable impact rate ...
Key data: 3700 kg, 775 mm
Fully Automated Forging Hammer Line (2004) BECHE KGH 5B (55 KJ) Line Description The complete line consists of the following machines: Tilting device, Stahlmann Conductive heating system, Stahlmann, D400G21/39000 XSH, 2004 Frako reactive power compensation Automation system, Lasco, 2009 2 Forging robots, Kuka, KR 30-3F Conveyor belt with lifting device Control cabinet with higher-level control system Short-stroke drop hammer, Beche, KG H 5.0B, 2004 Discharge robot for removal, Kuka, KR 30/2, with bucket, 1999 Technical Details (2004) Short-Stroke Die Forging Hammer BECHE KGH 5B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 5.0B Machine number: 155002 Year of manufacture: 2004 Operational parameters Working capacity max. 55 kJ Max. impact frequency 99/min Max. usable impact rate 55/min Maximum ...
PET filling line Krones capacity: 16.000 bph by 1.500 ml product: still and carbonated water bottle sizes: 500 ml / 1.000 ml / 1.500 ml label: 3 labels and wrap around label OPP packaging: 3 x 2 year of manufacturing: 2012 consisting of: Blowing machine Krones Contiform 8 including preform feeding Filling and capping bloc Krones Modulfill CIP system Varioclean AUT-5000L Inspection machine Krones Checkmat 731FM-X Bottle dryer Linardry S1M Labelling machine Krones Topmatic to label 3 labels and wrap around label OPP Packer Variopac to pack 3 x 2 = 6 pack Handle applicator Palletizer Modulpal for pallets 800 x 1.200 mm and 1.000 x 1.200 mm Stretch wrapping machine Robopack Sleeve labelling machine Krones Bottle conveyors, cap conveyor, pallet conveyors
Key data: 500 , 77 , 30
Manufacturer: Krauss Maffei Type: 50 - 220 C Built: 2001 Control: MC4 Closing force: 500 kN Tie bar distance: 321 mm x 321 mm Plate size: 540 mm x 540 mm Tool installation height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Lifting volume: 101 ccm / 92 gram HP Spray pressure: 1488 bar General Engine: 11 kW Heating: 9 kW Dimensions: 3.3 m x 1.3 m x 1.8 m Weight: 2500 kg Screen text: English / English Additional equipment Core pull x1 Air valve x1 Accu Hot runner control
Key data: 3700 kg, 775 mm
Fully Automated Forging Hammer Line (2002) BECHE KG H 5B (55 KJ) Line Description The complete line consists of the following machines: Tilting Device, Stahlmann Step conveyor, Stahlmann Cold Belt Conveyor with Lifting Device Conductive Heating System, Stahlmann, E89, 2019 Heated Conveyor Belt Forging Robot, Lasco / Kuka, KR 60-3F, 2019 Central Control Cabinet Safety Fence with Safety Doors Short-Stroke Die Forging Hammer, Müller Weingarten (Beche), KG H 5B, 2002 Extraction robot, Kuka, KR 60-3F, 2019 Discharge station, Stahlmann Technical Details (2002) Short-Stroke Die Forging Hammer BECHE KGH 5B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 5B Machine number: 127050 Year of manufacture: 2002 Operational parameters Working capacity max. 55 kJ Max. impact frequency 99/min Max. usable imp ...
Conical rounder Model: KCM 1000 Capacity max. 1200 pieces/h Stainless steel version with Flourer Cones and warp grooves with Teflon coating Effective path approx. 3.5 m Adjustable knitting rings for dough weight from 300 to 1200 g Machine mobile Connection 400V, 0.75 kW, 16A-CEE plug Dimensions ca: 1050 x 1150 x 1600 mm, WxDxH Used machine overhauled with 6 months warranty
Key data: 2700 kg, 790 mm
Semi-Automated Forging Hammer Line (2001) BECHE KG H 4B (40 KJ) Line Description The complete line consists of the following machines: Tilting device, Stahlmann Step conveyor, Stahlmann Cold conveyor belt Conductive heating unit with 3 modules, Schneider, KEA, 2002 Frako reactive power compensation unit; - Cooling system is required - Hot conveyor belt Impulse blower Short-stroke drop hammer (forging), Beche, KGH 4B, 2001 Technical Details (2001) Short-Stroke Die Forging Hammer BECHE KGH 4B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 4B Machine number: 127050 Year of manufacture: 2001 Operational parameters Working capacity max. 40 kJ Max. impact frequency 98/min Max. usable impact rate 41/min Max. ram stroke 790 mm Weights Total machine weight approx. 58,000 kg Anvil bed 46,000 kg ...
Floor oven electric oven Matadore Store Type: 6.8. M manual control Bottom heat and top heat can be individually controlled for 4 x sheets 600 x 800 mm or 8 x sheets 600 x 400 mm Stove height 17 cm all herds with steam Shelf at the bottom Base frame mobile with locking device Connection 400V, 4 x 8 kW, 4 x 16A-CEE plug Water connection 3/4 inch, water drain DN 40 Dimensions: 930x1332x1540 mm, WxDxH Used oven Visit our large Bakery Machinery Center!
1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.
1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.
Vat boilers for spiral kneader Kemper ST 100 A -Kneading kettle with wagon and handle -for spiral kneader Kemper ST 100 A -Boilers are made of stainless steel -Boilers are for max. 100kg flour or 160kg dough
RECKERMANN KOMBI 1300 - Heidenhain TNC 114B -Bracket milling machine with TNC114 B retraction control (NC route control) -Year of construction 1987 -Very neat original condition -Travel X/Y/Z 1020x320x450mm -Work table size 1370x400mm -Horizontal / vertical milling device -Vertical head swivels +/- 90 degrees -Vertical milling head with drilling quill 80mm -Quill stroke -Speed range - Vertical 33 - 1800 rpm / 16 steps -Speed range - Horizontal 22 - 1200 rpm / 16 steps -Tool holder ISO 50 -Automatic feeds / rapid traverses in all three axes -Feed speed X-axis 10-1000mm/min -Y-axis feed speed 10-1000mm/min -Feed speed Z-axis 4-400mm/min -Drive power 11KW -Coolant device -Work light -Various milling mandrels + machine-related accessories -Documentation Dimensions: LxWxH 3.3x2.6x2.1 meters / Weight 4500KG
Electrode welding machine Manufacturer Kemppi Type TYLARC453 Power 450 amps at 35% ED, 345 amps at 60% ED 265 amps at 100% ED Power 20kw, 21kva Power connection 400 Volt Weight approx. 250kg Machine ready for demonstration under power. Shipping on Euro pallet possible. Price is net plus 19% VAT Please note our "Legal Information" with further information
Electrode welding machine Manufacturer Kemppi Type TYLARC653 Power 650 amps at 35% ED, 545 amps at 60% ED 465 amps at 100% ED Power connection 400 Volt Weight approx. 300kg Machine ready for demonstration under power. Shipping on Euro pallet possible.
YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made
Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)
- MCU Magnus 400 II Platesetter (3 cassettes) - ca. 62.000 plate exposures - suitable for GTO / SM 52 / SM 74 plates - for processless plates - Inline punch Bacher 425 mm - Plate Stacker ADVANT PST 26 - Shooter - without RIP
Machine Details Warehouse number 1105-03719 Machine type CNC lathe - inclined bed machine Brand KITAMURA Type KNC 250 YS Year of construction 1999 Control type CNC Control Fanuc 18 IT Storage location FRANCE Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock HAGUENAU FRANCE Technical details Turning diameter 280 mm Turning length 270 mm Control Fanuc 18 IT Rod passage: 42 mm Speed range - spindle 5000 rpm Feed range - turret / infinitely variable 1 - 12000 mm/min Rapid traverses 20 / 24 m/min Number of tool turrets: 1 piece Tool turret - seats: 12 stations Tool holder direct holder Total power requirement 20 kW Machine weight approx. 4.5 t Space requirement approx. 2900x2100x1800 mm Accessories 3 - Baking - Food YES Complete machine documentation YES Chip conveyor YES Parts catcher YES Collet device YES Electronic handwheel YES Co ...
various twin press impregnation, plate size ~32cm x 45cm, a good condition, immediately available
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Available in stock 1 x Used BorgWarner Turbocharger type K31 for MAN Genset. The turbo was installed on a MAN E2876 LE 302 gas genset. Last turbo servicing was on July 2019. The equipment is in perfect working conditions.
Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Konica Minolta Storage Film System (CR) Regius Sigma II with: First Processing Station 5 RC-300 CR cassettes: 18x24 - 1 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...
Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC
Key data: 2700 kg, 855 mm
Line Description The complete line consists of the following machines: Tilting Device, Stahlmann Step Conveyor, Stahlmann Cold Belt Conveyor Conductive Heating System, Schneider, KEA 303, 2002 Transfer Conveyor Short-Stroke Die Forging Hammer, Beche, KGH 4B, 1994 Discharge Conveyor with Blow-Off Control, Stahlmann, 2001 Gas furnace, Stahlmann Eccentric Press for Hot Trimming, Ruhrmann, EVR 125 H Technical Details (1994) Short-Stroke Die Forging Hammer BECHE KGH 4B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 4.0B Machine number: 941 5435 Year of manufacture: 1994 Operational parameters Working capacity max. 40 kJ Max. impact frequency 98/min Max. usable impact rate 48/min Max. ram stroke 855 mm Weights Total machine weight approx. 58,000 kg Anvil bed 46,000 kg Drive head compl ...
Available in stock 1 x Used Kiene Cylinder Pressure Indicator Model K-107. Indicator equipped with a 4” diameter, dual range (0-3000 PSI/0-210 Bar), liquid-filled bourdon gauge with an FRP case. Indicator furnished complete with a carrying case. Design Features: - Quick attachment to standard indicator valves; - High accuracy, liquid-filled, dual scale pressure gauge; - Minimum space required for installation; - Components designed for low maintenance, long life operation. The equipment is used but in good working conditions.
automatic baler Manufacturer: PAAL Type: KONTI 700 G/S Year of construction 2010 Technical data: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 75 kW Throughput capacity (according to manufacturer's specifications): approx. 650 m³/h Capacity at 35 kg/m³: 22.5 t/h Capacity at 60 kg/m³: 36.5 t/h Capacity at 100 kg/m³: 55.5 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,450 kg depending on baled material and bale length Machine weight: up to approx. 47 t Optional: with Bollegraaf steel plate strip according to picture
Honda Emergency Power Generator 8 kVA - NEW with E-start, AVR ESC, 45 litre tank - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - - - - - Generator - Manufacturer: NSM, Italy - Power: 7.7 / 8 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - - - - - Start System - Electric starter via ignition lock - Start by cable pull also possible - - - - - Facilities - Large 45 liter tank - AVR regulator (for exact voltage compliance) - Electric start - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optionally orderable) - Wheelset + push rods - Service kit for initial maintenance - 2.5 mtr. Flexible exhaust hose - - - - - Other data: - Dimensions: 79 x 58 x 65 cm - Weight: 99 kg - Consumption: approx. 2.0 ltr. (50%) / 2.7 ltr. (75%) - - - - - Shipping: - Germany-wi ...
HONDA generator set 9 kVA - NEW Soundproofed - Stage V emission standard - - - - - Engine: - Honda - Model: GX390 - 1 cylinder - Gasoline - Air-cooled - Displacement: 389 cc - - - - - Generator: - Manufacturer: NSM (Italy) - 7.7 / 8.5 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hertz - AVR regulator - - - - - Starting unit / control unit: - Ignition lock for starting and stopping - ATS interface, for easy plugging in of an ATS automatic start box - Hour meter - 1x 400V 16A socket - 2x 230V socket - - - - - Equipment: - AVR voltage regulator (so sensitive devices can also be operated) - Electric start - Oil pressure sensor - Overload protection - Automatic start interface (ATS connection) for easy plugging in / retrofitting of an automatic start box - Stage V emission standard: The device can therefore also be used for mobile application ...
Honda Emergency Power Generator 7 / 8 kVA NEW with E-start and AVR controller - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - 389 cc - - - - - Generator - Power: 7 / 7.7 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - AVR regulator - - - - - Start System - Electric start via ignition lock - Start by cable pull also possible - - - - - Facilities - Electric start - AVR regulator (for exact voltage compliance) - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optional for an extra charge) - Wheel set + push bars: 120 € net - - - - - Other data: - Dimensions: 79 x 57 x 68 cm - Weight: 101 kg - Consumption: approx. 1.5 ltr. (50%) / 2.1 ltr. (75%) - - - - - Shipping: - Germany-wide transport including unloading is possible for an extra charge - To be able to quote an exact freight price, please sen ...
The machine is manufactured on request. Can be produced in a length of 5500mm and 5/6 sawing units. Suitable for manufacturers of wooden pallets and small blanks. Motor power 3kW.
Multi-blade saw with feed belt, suitable for very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Main engine power: 3 / 4 kW Diameter of the shaft: 50 mm Length of the shaft: 800 mm Width of the feed belt: 800 mm Feed motor power: 0.55 kW Feed speed : 4 - 18 m/min Tool diameter: 300 mm Machine on a system of sliding discs for quick tool change and dimensional adjustment. As additional equipment, it is possible to process short pieces of 150 mm in length. Additional equipment: laser for marking the cut
Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece
Used Kuba CAV L08-2x4C condenser. Complete with 8 fans - 50 Hz - 0,9/1,2 kW - 620/720 RPM - Diameter 800 mm and a total airflow of 143.040 m³/h. No. 13476 Brand Kuba Type CAV L08-2x4C Product type Air Cooled Condensor kW 587,3 (Freon) Number of Fans 8 RPM of the Fans 620/720 Air Flow in m³/h 143.040 diameter fans Ø 800 mm Surface (m2) 1.778 Tube volume 288 dm³ Sizes 8600x2370x2100 mm (LxWxH) Weight 2100 kg Remarks | Y.o.b. 2003 Amount in stock 1
SDMO Power Generator 8 kVA + + With wheel set + + - - - - - Engine: - Suzuki - 1 cylinder - Air-cooled - - - - - Generator: - SDMO (France) - Power: 5.5 / 6 kVA - 230 volts - 50 Hertz - - - - - Condition and origin: - The generator set was used for rare private purposes and has only been running for a few hours - The engine starts and runs well - The generator generates 230 V and 50 Hz - A test run with load acceptance was done - - - - - Scope of delivery: - SDMO generator set 6 kVA - With wheelset - Incl. integrated tank - Exhaust / silencer - 2x 230V socket - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please send us an inquiry with your zip code - - - - - Price and payment: - Payment: Prepayment - An invoice is created - Margin taxation according to ...
MOSA generator set 15 kVA soundproofed - year 2014 - 500 hours - - - - - Engine: - Lombardini (Italian manufacturer of diesel industrial engines) - 2 cylinders - Diesel - Air-cooled - - - - - Generator: - Manufacturer: Sincro (Italy) - Power: 13.5 / 15 kVA - 230 / 400 volts - 50 Hertz - - - - - Control cabinet: - Ignition lock for starting - Generator monitoring: Volts, Hertz - Engine monitoring (engine temperature, fuel shortage, battery voltage, oil level) - Hour meter - 1x 400V 32A socket - 1x 400V 16A socket - 1x 230V CEE socket - 1x 230V Schuko socket - - - - - Condition and origin: - The generator set was only used for occasional purposes - It has only run for 500 hours of operation - A test run with load acceptance was done - The engine runs well and the generator generates 230 / 400 volts and 50 hertz - - - - - Scope of deliv ...
modernized machine with new LTG-StoreControl P control system Control expansion optionally possible Exterior Dimensions: Overall height 8,700 mm Overall width 3,500 mm Installation depth 1,580 mm 51 carriers with a payload of 350 kg each in clear usable dimensions: H = 255 mm W = 3,050 mm T = 520 mm Chain jump 305 mm 51 galvanized intermediate floors Total payload up to 19,000 kg Side table in 990 mm above OKFF with NiRo worktop, 315 mm deep Colour scheme grey Motor power drive 1 x 3.8 kW / 400 Volt subject to errors, technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in D, A and other neighboring countries
ROMACO KILIAN TABLET PRESS, MODEL S370 PRIME Medium-sized single-layer rotary tablet press. Modular and compact, for flexible tablet production. Made in Germany. Built in 2022. CHARACTERISTICS - Interchangeable die table - Tablet chute on one side - Simple and intuitive HMI control system - Connectable tablet control unit for automatic in-process control - Weight: 1.925 kg PRODUCTION - Output: 156,000 to 330,000 (depending on tablet size and pressing material) - Printing stations: 26 to 44 - Number of dies: 44; 40; 32; 26 - Tool type (EU and TSM): B; D - Die type: BBS; BB; B; D - Max. pre-compression force: 40 kN - Max. main compression force: 80; 100 kN - Max. tablet diameter: 11; 13; 16; 25 mm - Max. die fill: 16; 20 mm ENERGY CONSUMPTION - Drive power: 5.5 kW - Standard voltage, frequency: 400 V, 50/60 Hz - Compressed air: 6 bar
Feluwa - Pump Condition: functional We can also offer general renovation on request. Spare parts are still available. If you have any questions, please contact us.
maximum number of results exceeded
please refine your search
