127,262 used machines on RESALE, but how to find them? Machine Search
capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 + 70 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm arm length: 410 - 1000 mm workpiece height max.: 765 mm coolant: ja boring spindle diameter: 38 mm diameter of quill: 70 mm spindle stroke: 225 mm boring spindle: MK 4 mm/min spindle turning speed - stepless: 70 - 2000 U/min feed range - spindle: 0,04 - 0,32 mm/U column diameter: 225 mm bore radius max./min: max. 1130 mm table surface area: 630 x 1320 mm height adjustment: 500 mm base plate: 1500 x 1000 mm T-slots: 4 Stück T-slot - distance: 18 mm total power requirement: 2,2 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m shift of supports: 590 mm without turntable and tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping capacity: max. 500 bar diameter of piston: 100 mm range L-W-H: 190 x 150 x 200 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping capacity: max. 500 bar diameter of piston: 40 mm : M16 range L-W-H: 140 x 65 x 85 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data for the shelving system: Shelving system: META Type: CLIP Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 4,100 mm Number of fields per row of shelves: 03 pcs. Number of grating shelves: 05 pieces per field The scope of delivery includes: 04x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm incl. base plates, cover caps and Schottsteg The stands are pre-assembled 2,000 mm high 835 mm deep 15x grating floor, new Material colour: sendzimir galvanised Total width: approx. 1,300 mm Total depth: approx. 800 mm Frame profile size: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Beams (03 pieces): 750 x 18 mm Weight|pcs.: approx. 6.62 kg Max. load per floor 200 kg, with the same weight. Distributed load 08x Compensating plates, new Dimensions: 7 ...
CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours ...
Vacuum pump Manufacturer: Grundfos Type: CH12-30 A-W-A-CVBV LBH: 400 x 180 x 240 mm
Description Sell used DMG NEF400 V3 5th Generation ISM 2-Axis Universal Lathe with C-Axis. Travel: X: 255mm Z: 800mm Lsbh Dtw Ujurtmre Hjrt Turning diameter over bed: 385mm Vibration diameter: 350mm Turning Length: 650mm Equipment: Main spindle as integrated spindle motor Speed: Max. 4500rpm Drive power: 8.0/11.5kW (100/40% ED) 12-speed disc turret VDI30 with 6 driven positions C-axis and spindle brake (Hydr.) Automatic tailstock, MK4 mount, travel: 680mm CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate and ShopTurn 3G Linux operating system Technology cycle for the application of an alternating speed for vibration-critical clamping Tool measuring device can be used manually in the working area Hydraulic Coolant spray gun Mechanical Oil Mist Separator Reinforced Coolant Pump 12bar ...
completely stainless steel suitable thermo-oil heated (300 kW) 12 kW Frying length 7,500 mm Track width 600 mm Top band infinitely variable speed Oil pump Oil level control Suitable for fire protection Filter Dirt transport Lid mechanical lifting device insulated lid Dimensions (L x W x H) : ± 10,900 x 2,000 x 3,500 mm Siemens PLC control type S5 95U+ HMI Simatic OP27 suitable for CIP cleaning + Oil Management System Type VTC 2000 single-walled tank Oil pump Dimensions (L x W x H) : ± 1,700 x 1,1600 x 3,400 mm Oil level indicator
Pump Manufacturer: AL-KO Geräte GmbH Type: HW A 1001 INOX Item #: 112 461 Flow rate: 4 m³/h LBH: 380 x 230 x 480 mm
Tetra Pak A3 Flex 1500ml Gemina TGA Filling Line For Sale Item #: Usm-141 Category Tetra Pak A3 CF/Flex Tetra Pak A3 Flex 1500ml Gemina Filling Line For Sale Filling machine Tetra Pak A3/Flex TGA1500Sq, in set with accessories, and Headspace by Injection kit, Year of manufacturing 2009 & Working hours 2427 Cap Applicator CAP 30/Flex, with HeliCap27 kit, Year of manufacturing 2008 & working hours 2631 Accumulation system ACHX-0400, Year of manufacturing 2008 & working hours 2404 Cardboard Packer TCBP70, Year of manufacturing 2003 & Working hours 8654 Set of conveyors TPC23 (35 meters with 3 drives) and spare parts for connection of components of the filling line, with dry lubrication system Line Controller LC 30, Year of manufacturing 2008 Condition: The line is currently in Production, Technical inspection can be arranged on request.Overall conditions of Equipment: Good.
Properties Used belt conveyor of the manufacturer FAM conveyor systems Color: Red Incl. SEW motor 1.1 KW Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Specifications: Dimensions of the belt conveyor Total length: 6.980mm Total width incl. motor: 1.250mm Total width without motor: 1.050mm Information about the belt Belt width: 850mm to 880mmmm Belt type: Lenk's groove Conveying width: 1.000mm Frame: Material: Steel Height incl. side guide: 280mm Total height incl. motor: 600mm Motor: SEW motor 1.1 Kw r/min 1400/ 114 Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or deliv ...
VLB GROUP ECO 92 NC2 tube bending machine was built in 2022 in Portugal by the VLB Group. The machine has only undergone a test run and has not been used in production conditions. The machine is used for precision bending of tubes and profiles with a maximum diameter of 92 mm. All machining parameters are programmed in an advanced industrial controller with a touchscreen. It allows precise basic movements, i.e. bending angle (Y axis) and tube rotation (Z axis), to be performed fully electrically. The distance between bends (X axis) is, in turn, precisely set using mechanical stops. Thanks to the technical solutions used, the offered ECO 92 NC2 mandrel bending machine is the perfect choice for high-quality workpiece bending in small and medium series. The total weight of the machine is 2420 kg. Technical specifications of the VLB GROUP ECO 92 NC2 tube and profile bending machine - ...
grinding diameter: 250 mm grinding length: 650 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Glauchau Type: SI 6/3 CNC brand: Siemens CNC model: Sinumerik Year of make: 1997 CNC controlled Maximum grinding depth: 250 mm Grinding diameter: 650 mm ø Rapid traverse: 10 m/min Speed: 50 - 500 RPM Inner grinder X (inner grinding device): 155 mm Length displacement interior grinding device on the table: 540 mm Tool grinding device Z (table move): 700 mm Circulation diameter: 650 mm ø Grindig diameter for internal grinding: 10 - 500 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical tank manufactured by GIUSTI in stainless steel with a total capacity of 198 liters and a useful volume of 160 liters. Domed upper bottom bolted to the body with 4 clamp connections and 2 handles. Lower bottom bulged with discharge from the bottom by valve. Clamp output connection. On structure with wheels. General characteristics: Maker GIUSTI Guy Vertical tank Material Stainless steel Year of manufacture 2007 Design pressure: -1/+1 bar Design temperature: 150 ºC Working conditions: 0.5 bar at 30 ºC Test pressure: 1.7 bar at 10+-5 ºC Specifications: Volume 160 L (TOTAL: 198 L) Background type Convex Envelope Wheels Outer diameter body 600 mm Body height 550 mm
turning diameter: 880 mm turning length: 6000 mm swing diameter over bed slide: 540 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Geminis Type: GE870 Distance between centers: 6.000 mm Centre height: 440 mm Swing over bed: 880 mm ø Swing over support: 540 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 85 mm ø Steadys: 400 mm ø + 600 mm ø 3 jaw chuck Digital read-out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PANASONIC TL-1800 GIII welding robot was built in 2021 in Japan by Panasonic Smart Factory Solutions Co., Ltd. The machine, distinguished by its high reliability and ease of operation, is an excellent choice for precision welding of workpieces using the TIG method. Its slim design, combined with the large range of arm movement, allows free operation in all positions, even in hard-to-reach places. The TL 1800 robot arm is offered together with equipment, which includes a controller, a portable control unit and a TIG welder. The total weight of the machine is 215 kg. Technical specifications of the PANASONIC TL-1800 GIII robot - number of axes: 6 - maximum payload: 8 kg - maximum arm reach: 1801.8 mm - robot axis movement range axis 1 (rotating trunk): ± 170° axis 2 (upper arm): -90° / +165° axis 3 (forearm): -80° / +210° axis 4 (rotating wrist): ± 270° axis 5 (bending ...
The Gram HSW packaging machine is an automatic multi-lane packaging machine for various products. The machine has packed licorice bars in paper film. The machine automatically wraps the product in paper or film in one go. The heat-sealed products are cut with a Hutt (bebex) guillotine type machine and placed on the output conveyors without the product coming into contact with any machine part or human action. Heat sealing provides an airtight package that protects the products. The line also packs the products in a box, after which the boxes are grouped on the pallet Gram multilane wrapping machine Manufacturer: Gram Brodrene A/S Denmark Type: HSW Year: 1990 15 lines Capacity up to 25 stroke / min. Recommended sealing temperature 100 - 180 degrees The weight of the paper can be 40 - 50 gr /m2 Hutt high-performance cutter ( Bebex ) Type: MS 1000 E Speed ...
Used batch fluid bed dryer made by GLATT, model: WSG-C 60 made of stainless steel with spray granulation. 1100 kg/day capacity 40 kW power installed Max. air capacity 6000 m3/h Max. Static pressure 12000 Pa New 1995. The device equipped with: - air filter - fan - control cabinet - piping - tun removable - full documentation - CE. EX.
The 30-40 KW Vaillant heat pump was an exhibit and ran for only a few hours - quasi-new! It is fully functional, max. energy efficient (A+) and suitable for all heat sources between -6 and 20 °C The VWS400 brine/water heat pump is intended as a heat generator for closed heating systems. Special features: – Flow temperature up to 65 °C for modernization and high hot water comfort – High efficiency thanks to modern, durable heat pump scroll compressor – Bivalent alternative or parallel operation possible – Increased living comfort in summer thanks to integrated cooling function (passive) – SG Ready and PV Ready – suitable for heating and hot water preparation – Up to 16 heating circuits possible thanks to integrated controller (with other accessories) Equipment: – Control for electric auxiliary heating up to 8.8 kW integrated – Sound decoupling of the ...
machine measurements: 850 x 1.800 x 1.450 mm machine weight: 360 kg power capacity: 0,7 kW Condition: new Specification: Powder coating machine, type: EPC-30/2E The machine is designed for the powder coating of cables, hoses and profiles. - Product diameter max.: 30 mm - Product speed max.: 1,500 m/min - Powder throughput min.: 30 g/min with fine dosage - Powder throughput max.: 400 g/min per powder injector - Electrostatic: available as option - Connected load: 0.7 kW - Dimensions LxHxW: 850 x 1,800 x 1,450 mm - Weight approx.: 360 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.
Printing plate deal Grafoteam TAT 48; good condition; we overhaul before delivery; Max. Plate format 1630x1300mm, min.510x400mm; Interface connection possible. Turn around table Grafoteam TAT 48; good condition; will be rebuilt before shipping; max.plate size 1630x1300mm, min.510x400mm; possible to connect with other machine.
Nicotra Gebhardt P2M Process Air Fan Housing fan with direct drive without coupling – single-sided suction Robust industrial designs Durable, easy to maintain High efficiency, quiet operation Individual solutions at a standard price Certified and assured quality according to ISO 9001 Technical data measured according to DIN 24163 Accuracy class 2 according to DIN 24166 Spiral Molded Housing Robust welded construction Housing positions in 90° steps Individual installation position Radial impeller Wheel diameter 500 mm Backward curved blades Welded Dust repellent Materials: Steel coated, hot-dip galvanized, stainless steel 1.4307 ATEX: Category 2 and 3; Gas and dust Manufacturer: Nicotra Gebhardt Volume flow: 8000 m³/h dPt: 1070 Pa Density: 1.2 kg/m³ Tmax: 80 °C N: 1460 1/min n max: 2511 1/min PW: 3.10 kW Ins/Eff= B/total L (13/15): 61/64 ...
Technical data Information on the technical equipment of the machine Length: 10509 mm Height: 2806 mm Total weight: 9500 kg Max. Printing speed: 11,000Dr/h Printing material width: min. 130 mm, max. 265 mm Print width with print mark: max. 254 mm Format length: max. 254 mm (10") Unwinding roll diameter: max. 1040 mm Unwinding spindle: 3" (max. 300 kg) Rewinder Spindle: 3" Grid Winding Spindle: 3" Reel diameter: max. 300 mm Grating trigger Roller diameter: max. 800 mm Components of the machine - Unwinder -Web trimming / edge trimming - Web edge control -Ionization device - Touch screen control panel - 2x Letterpress Printing Unit - 1x painting unit (Flexo) -Loop box - -Rotary die cutter with the following magnetic cylinders (Z72, Z74, Z76, Z78, Z80, Z84, Z88, Z92, Z96, Z100, Z104, Z108, Z112, Z116, Z120, Z124) - Wire mesh winding unit - Outlet part - C ...
SPECIAL EXECUTION FOR CARBON OR TECHNICAL FABRICS ! WEAVING MC WITH CREEL & SUCTION UNIT , SPECIAL EXECUTION FOR CARBON OR TECHICAL FABRIC WEAVING TYPE : G6200 S 190 N8 SP - SPECIAL EXECUTION FOR CARBON OR TECHICAL FABRIC WEAVING 8 COLOR, WITH STAUBLI DOBBY 2617 WW : 190CM SERIAL NO. : 1056 ACCESSORIES : CREEL WITH 192 POSITIONS , BY CMG , YOC 2010 DUST SUCTION UNIT 4 FRAMES 4 PREWINDERS IRO ORION BATCHING MOTION
Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas chamber furnace Type 003.05 With loading trolleys Maximum temperature 200 ° C Approximate internal dimensions (W1900mm x D2950mm x H1800mm)
Professional thermal tunnel for shrink film packaging. Ideal for packs, bottles, boxes, trays and batches in production or logistics lines. Specifications Brand / Model: GARPER GPT 110 R1 Tunnel mouth: 700 x 400 mm (width x height) Auxiliary tape: to place the plastic on the product, 500 mm wide Adjustable speed and temperature (depending on machine configuration). Robust construction for continuous work. Advantages Uniform and professional shrink wrap finish. Simple operation and basic maintenance. Compatible with common heat shrinkable film (according to the film's technical sheet). Applications Warehouses, logistics, e-commerce, food/non-food industry, printing presses, factories and distribution centers that need to compact and protect products. Internal reference: GT-5274
Key data: 320 mm, 500 mm, 3800 1/min
OKUMA Genos L 3000-e / 2021 Circumferential diameter max. 390 mm Turning diameter 300 mm Turning length 500 mm X - Axis 235 mm Z - axis 520 mm Y - Axis 100 (+50 / -50) mm C - Axis 360 / 0.001 ° Main spindle: Bar passage 70 (80) mm Speed range 38 - 3800 rpm Spindle motor 22 KW Torque 412 Nm Sub-spindle: Bar Passage 43 (53) mm Speed range 6000 rpm Spindle motor 7.5 KW Torque 47.7 Nm Tool turret: Number of applicants WZ im Revolver 12 Speed range 45 - 6000 rpm Drive 5.5 KW Torque 31.3 Nm Machine weight approx. 5500 kg CNC OKUMA OSP P300LA-e Electr. Handwheel Software: Automatic main spindle interpolation Software: Screw Line Interpolation Software: Eccentric milling Software: Tool height correction in Y-axis Software: Synchronized tapping with applied tapping Tools Software: ADVANCED ONE-TOUCH-IGF with autom. Work plan creation OSP-P300LA-e TE ...
Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek Finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate internal dimensions (W1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) YOC 1992 3 x 380 volts 41 kW
Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...
Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...
LHS Warehouse Technology YOUR SUPPLIER FOR NEW AND USED SHELVING SYSTEMS OF ALL KINDS On 20,000m² - Pallet racks - Multi-storey stages - Shelving racks - Cantilever racks - Tire racks - Packing tables - and much more Various manufacturers in different sizes and lengths immediately available from stock Kaarst Manufacturer examples: Jungheinrich, Bito, Meta, Thyssen, Stow, SLP, Dexion, Galler, Schäfer, ! Currently over 20,000 pallet spaces IMMEDIATELY available We will be happy to make you an individual offer tailored to your needs (lengths / heights / loads). Demand and system determination of existing systems is also possible. The indicated price serves as a guideline for used goods and refers to gross per parking space incl. 19% VAT. Purchase / assembly and dismantling / rack inspections can also be offered. ! Do not hesitate to contact us !
Key data: 280 mm
Ref.nr 00898 Name of the system: Used band saw Manufacturer: Bauer HS 280 GZA: For automatic sawing of small diameter ranges, universal application by the miter device, hydraulic material feed. Model HS 280 GZA Year of construction 2012 Technical data: (according to data sheet) Automatic saw design Cutting range 90° Round Diameter 280mm 90° Flat 300 x 230mm 45° Flat 220x230mm 30° Flat 130x170mm Cutting angle 0-30° Saw motor 1,100/1,400 Saw Blade 3000x27x0.9mm Belt speed 1: min 30m/min 2: max. 60m/min Coolant Pump 90W Hydraulic Pump 370W Mains connection 400V / 50-60 Hz Clamping force adjustment infinitely variable 10-40 bar Stroke length 500mm Working height / infeed height 500mm Dimensions (L x W x H) 1700 x 2100 x 1400mm Weight 1100 kg Scope of delivery / standard equipment Completely ready for connection, machine stand with chip collectio ...
cross-section width:: 700 mm cross-section heigth:: 500 mm feed:: -- mm Condition: used, overhauled Specification: splitter for rubber bales - overhauled with CE - cross section width max.ca.: 700 mm - cross section height max. approx.: 500 mm - cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz - Infeed roller conveyor for product transport - Machine stands on a raised pedestal - Two-hand safety control for driving the blade movement - Safety guard according to current standards - New control cabinet - New on-board system machine - Operating and maintenance manual in English - CE marking - Paintwork: according to customer requirements - Refurbished with 1 year warranty - CE marking, Option: - Output roller conveyor new The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The iCombiPro is the latest combi steamer from RATIONAL. The iCombiPro 20.1/1 gas model with 20 plug-ins GN 1/1 is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without any monitoring effort. The super-fast intermediate & self-cleaning keeps your device sparkling clean. The device has been tested in our in-house specialist workshop and is fully functional. Rjbpextm D Heuvnljch These are sample photos, originals will follow shortly. The combi steamer is available from kW 44. You will receive an invoice with VAT. Service: We will be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCo ...
mobile heating system, central heating system, steam heating, land steam boiler system used STEAG / GVT Saarbrücken Boiler capacity: Steam 5 t/h Boiler manufacturer: BABCOCK / OMNICAL Boiler type: OMNIMAT Temp. max 190°C Pressure max 13 bar Boiler capacity 6080 l OIL / Gas Burner WALKER RGL50/2-A YOC:2004 5400 kW Gas type N Heat and soundproofed container 11 x 3.6 x 3.9 m Transport weight: approx. 30 t Operating weight approx. 44 t Electrical power requirement 25 kW The plant has not been in operation since 04.2020 and has been preserved dry.
Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Min size: 28x28 cm max Size: 76x102 cm Max speed 50 m/min Grammar 130 gsm- 380 gsm Pneumatic
USED GLATT STAINLESS STEEL 1000 LITRES BICONICAL MIXER REF.: C6525 Bicone mixer made of stainless steel manufactured by GLATT with a total capacity of 1000 liters. General characteristics: Manufactured by GLATT Type Biconical mixers Material Stainless steel Year built 1998 Weight 1030 kg Transport dimensions: Total height: 2200 mm Total length: 2430 mm Total width 1500 mm Bicone dimensions: Body diameter: 1300 mm Body height: 350 mm
maximum number of results exceeded
please refine your search
