cutter k g used for sale

Load Weight Shelf: 6600 kg Loading weight per level: 1100 kg Number of load levels: 6 Stk. Recommended material length: 6000 mm Column width: 2 x 2000 mm Shelf height: 2440 mm Compartment width: 800mm mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 36000 kg Loading weight per level: 3000 kg Number of load levels: 2 x 6 Stk. Recommended material length: 6000 mm Column width: 2000 mm Shelf height: 2440 mm Compartment width: 500 mm dimensions: 4,8 x 2,55 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 14000 kg Loading weight per level: 2000 kg Number of load levels: 7 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,8 x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 12000 kg Loading weight per level: 2000 kg Number of load levels: 6 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,8 x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 10000 kg Loading weight per level: 2000 kg Number of load levels: 5 Stk. Recommended material length: 3000 mm Column width: 1500 mm Shelf height: 2440 mm dimensions: 2,3x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number 68 Mosa generator set Type: GE 10 SXC Engine Lambardini Type: 9 LD 625-2 Power 10 KVA RPM 1500 Hours: 3988 Connection 16A, 32A The switch off control must be operated manually. Otherwise the unit will run Metrics: L: 1.45m H: 0.90m W: 0.75m Weight: approx. 250 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 2000 KW, 400 V

Caterpillar G3516H, 2000 kW, 400v. 50 Hz NEW Caterpillar G3516H, 2000 kW, 400v. 50 Hz NEW Caterpillar G3516H, 2000 kW, 400v. 50 Hz NEW Caterpillar G3516H, 2000 kW, 400v. 50 Hz Ten (10) New Caterpillar G3516H, 2000 kW, 400v. 50 Hz. Natural gas generator sets. These 2500 kVA units are set for continuous an parallel to gird applications. They come with a prelube pump, Jacket Water Heater, no CSA or EU certifications, 4.3 EMCP control panel, 1800 frame generator, open skids Manufacturing year 2023 & 2024.

grinding length: 800 mm grinding width: 400 mm workpiece height: 375 mm Control: Siemens 840 D total power requirement: 18 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface grinding machine manufactured in 1990. This GEIBEL & HOTZ FS 40 SA features a maximum grinding length of 400 mm and a grinding width of 200 mm. It has a maximum workpiece weight capacity of 150 kg and a clamping surface of 600 mm in length. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ FS 40 SA machine we have for sale. Contact us for further details.

Manufacturer: Cleveland Model: GAPU-5 A/M Diamond Discs: - Maximum Diameter: 200 mm - Minimum Diameter: 180 mm - Maximum Width (with double disc): 100 mm Note: The supplied grinding wheel guard is designed for a maximum diameter of 200 mm and a minimum diameter of 180 mm. Workpiece Spindle: - Speed Range: 400 – 4500 rpm Planing Unit: - Swivel Range: 190° - Oscillation Stroke: 70 mm - Oscillation Speed: Infinitely adjustable - Spindle Speed: 1400 or 2800 rpm Planing Grinding Disc: - Diameter: 200 mm - Width: 20 mm - Bore Diameter: 32 mm Machine Dimensions: - Length: 1250 mm - Width: 1000 mm - Height: 1100 mm - Weight: 450 kg Noise Emission: - Standard Operating Sound Level: 83 dB(A) - May be lower in individual cases Find more here - .ucymachines/ Contact us at - sales@ucymachines

; Gross weight [kg]: 1522; Engine: Caterpillar C7.1; Accessories: Control Panel, Double walled fuel lines, Keelcooled, Voltage (V): 24

Spare parts Siemens 810 GA2 CNC numerical control + Simodrive 611 power supply and drives It can be inspected in our warehouse in Gussago BS Mimu Machine Tools

Pasta guiding machine, plastic belt, belt width: (1x) 1070 mm, 6 lanes, plastic belt, belt width: (6x) 145 mm, plastic wire belt, belt width: 460 mm, total dimensions: 2700 mm x 2500 mm x 1700 mm.

Grinding wheel dimensions (od x id x width): Ø350 x Ø150 x 125 mm, Ø min/max to be rectified: 1 / 75 mm, Peripheral speed of grinding wheel (m/s): 30 m/s, Regulating wheel width: 125 mm, Min/max speed of regulating wheel (r.p.m.): max 350 r.p.m., Diamond grinding (auto/manual): Hydraulic / Manual, Diamond grinding speed: adjustable, Lubrication (auto/manual): Car, Control type (CNC/manual): MANUAL, Dive (auto/manual): AUTOMATIC, Regulating wheel dimensions (od x id x width): Ø225 x Ø120 x 125 mm, Grinding wheel width: 125 mm, Maximum length to be rectified in plongeé: 125 mm, Total power: 8 Kw, Voltage: 380 V, Long: 1.650 mm, Width: 1.000 mm, Tall: 1.400 mm, Weight: 2.480 kg

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4315Kg approx. machine and 60 Kg box

Rectificadora sin centros GOZUA RC 2-75

High: 1.400 mm, Long: 1.650 mm, Width: 1.000 mm, Weight: 2.480 kg, Voltage: 380 V, Cnc brand: -, Cnc model: -, Total power: 8 Kw, Cnc axes nº: -, Grinding wheel width: 125 mm, Diamond dressing speed: adjustable, Infeed (auto / manual): AUTOMATIC, Regulating wheel width: 125 mm, Dressing (auto / manual): Hydraulic / Manual, Ø min / max to grinding: 1/75 mm, Regulating wheel speed nº: infinite, Lubrication (auto / manual): Car, Control type ((cnc / manual): MANUAL, Maximum infeed grinding length: 125 mm, Peripheral grinding wheel speed (m / s): 30 m / s, Min / max regulating wheel speed (r.p.m.): max 350 r.p.m., Regulating wheel dimensions (od x id x width): Ø225 x Ø120 x 125 mm, Ø grinding wheel dimensions (od x id x width): Ø350 x Ø150 x 125 mm

Flow steam generator with 33 kw/h Capacity: 50 kg/h steam Strom / Volt: 400 capacity / hour ca.: 50 customs no.: 84022000

New Gebhardt TD9 electric steam generator. Manufacturer: Gebhardt Anlagentechnik GmbH & Co. KG, manufacturer article: 100-0001-0900. 9.9 kW, steam output 15 kg/h, maximum steam pressure 2.5 bar. 3/N/PE 400 V AC, 50 Hz, CEE 5-pole 16 A, fusing 16 A. Water: GeKa coupling, minimum 2.5 bar, steam outlet NW 25. 760 × 345 × 690 mm, approx. 50 kg. Cable approx. 5 m. Standard version, accessories quoted separately. Price and delivery time on request.

Charger (loading and unloading), High: 2,000 mm, Long: 2.700 mm, Width: 2.100 mm, Weight: 6.580 kg, Voltage: 220/380 V, Total power: 28Kw, Accessories included: Feeder / Feeder, Grinding wheel width: 250 mm, Regulating wheel width: 250 mm, Ø min / max to grinding: 3/125 mm, Control type ((cnc / manual): Manual, Maximum infeed grinding length: 250 mm, Regulating wheel dimensions (od x id x width): 350 x 250 x 125 mm, Ø grinding wheel dimensions (od x id x width): 500 x 250 x 304.8mm

VIBRATING SCREEN - best solution for liquids and powders, Dynamic three-dimensional vibrations., The vibratory motion of the screen spans both horizontal and vertical directions, providing the flexibility of adjustment in both axes., Minimal installation requirements., No vibration transmission from the upper section to the base, Possible addition of wheels to the base., Quick disassembly for cleaning or mesh replacement., Each screen supports the installation of 1 to 4 separation stages, yielding 2 to 5 distinct product fractions., Constructed in carbon steel or stainless steel., All parts in contact with material are on AISI 304 stainless steel Fully compliant with CE regulations most required screen diameter from 400 mm up to 2.200 mm to cover all needs, self cleaning system,, Just ask for your own vibrating screen by listing the following specs:, - material, - process, - size of good ...

GAMMA MECCANICA WATER RING PELLETIZER, Model TDA 6, stainlesse steel housing and all parts in contact with water, star blade holder for 4 knives, throughput rate 2,0 Tons/h depending on materials and feeding rate, constructed in 2013, complete with stainless steel drying centrifugeù, screen basket in stainless steel, control panel, photos taken before reconditioning, the machine is offered totally reconditioned with warranty, capacity: 2.000 kg/h

Starting product :, car, 4x4, truck tyres, agri tyres max diam. 1.400 mm and max thickness 300 mm., Final product : 80 - 100 mm.chopped (for inceneration), 4 - 6 mm.crumbs, 2 - 4 mm.crumbs, 1 - 2 mm.crumbs, 0,5 - 1 mm.crumbs, 3 operators per shift, required space : about 30 x 22 mt., calculated on a 220 days/year 8 h/day = 3.520 T/year - 16 h/day = 7.040 T/year, Harmonized steel as a residual product., Average throughput rate of granulate : 2 Ton/h in input (throughput rate depends on feeding rate and on the kind of tires), installed power : about 650 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - available manual (20-25 tyres/h) or automatic (45-50 tyres /h), for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.500 mm wide, transport belt, discs screen, transport belt, transport belt for fine material, transport belt to return  ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

GUILLOTINE REEL SLITTER 60 T, Working width 2.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of, conveyor belt, fork-lift tray to handle the reel before and after splitting, spare knife, Force: 60 T, working width: 2.000 mm. 78.74, working height: 1.250 mm.

GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 1.250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

GUILLOTINE REEL SLITTER 50 T, Working width 3000 mm, Working height 1500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 50 T, constructed in sturdy painted steel,, Working width 3.000 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T

GUILLOTINE REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T

GUILLOTINE REEL SLITTER 35 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x17,5 Ton., No.2 pumps 30+30 lt/min, volume 21+21 ccm, Speed up: 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydrauliC pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer.

Hydraulic Gripper

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mm tooth width max.: 58 mm spindle speeds (infinitely variable): 6000 U/min work piece spindle speed: 1200 U/min diameter of tools max.: 230 mm diameter of tools min: 69,85 mm x-axis: 325 mm y-axis: 350 mm z-axis: 470 mm b-axis: + 90,1 / - 1 ° work piece table - Ø: 212,71 mm Control: SIN 840 D SIEMENS total power requirement: 75 kW weight of the machine ca.: 10.000 Kg dimensions of the machine ca.: 6,10 x 4,40 x 3,30 m coolant filtering unit Hoffmann HSF 100 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm grinding width: 400 mm workpiece height: 375 mm table surface area: 840 x 400 mm table speeds: 0,005 - 35 m/min spindle speeds (infinitely variable): 1000 - 3000 U/min grinding wheel motor: 3,7 kW grinding wheel size: 300 x 50 x 76,2 mm cross adjustment: 100 - 1250 mm/min rapid traverse vertical: 180 mm/min table load: max. 700 kg distance spindle center to table: max. 525 mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions of machine L x W x H: 3,14 x 1,78 x 2,50 m Accessories: magnetic plate 800 x 400 mm, grinding wheel with flange, wheel dressing attachment, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Average throughput rate abt.500 kg/h depending on feeding rate 30 kW.drive, 400 V 50 Hz Granulating chamber mm.600 x700 Knives length 600 mm. Rotor length 600 mm. diam.500 mm. N.3 x 2 in line rotating knives N.2 still knives (micro-adjustable) Grid holes 12 mm (or on request) Extraction vent 1,5 Hp+ piping + cyclon + dust sleeves Manual hydraulic pump for hopper opening Water cooling system in the granulation body Electric cabinet User’s manuals drawings, CE compliance Soundproof cased

APE gearbox (Dualbox) geabox Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm

Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Total weight: 1000 kg

Control Siemens Sinumerik 840D Max. workpiece diameter: 250 mm Max. workpiece length: 1500 mm Max. workpiece weight: 150 kg Internal grinding device Paper Belt Filter Centering tip Diamond dressing tile Grinding wheel change aid

A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Danstoker Gas boiler 3000 kw Year of manufactory 2016 Weishaubt gas burner Gasstring Pumps and pipes Panelboard All cabels Price is include loading Price 12000 euro Dismantled and ready for loading

CNC Control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot MByear of construction approx. 1980Rack with 20 module locations - 12 built-in modulesBuilt-in modules:1 Piece 0.651.406-19.3 UNI 030655-1017 Universal Interface1 Piece 0.650.847-56.1 O32 Output Card2 Piece 0.651.708-57.3 I32 032937-1017 Input Card1 Piece 0.652.138-36.1 APC1 Piece 0.651.928-25.3 LAB Position Control1 Piece 0.651.400-22.31 Piece 0.860.204-59.1 B321 Piece 0.652.128-35.0 RE41 Piece 0.651.269-26.0 ITY 030645-1017 Serial

MIG MAG Welding Machine, Shielded Gas Welding Machine CLOOS Type GLC 357 NMIG MAG Welding Power SourceFabr. No. 576 Year of construction approx. 1985Nominal power 350 Amp.Power 350 Amp. - 80% ED 310Amp. - 100% EDEinfinitely variable adjustment rangeConnecting hose package 4.5 metersMains connection 380 Volt, 50 Hz, 32 Amp. Plug - 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch- water-cooled-

12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Key data: 2500 V, 11000

2 x zero-hours Caterpillar G3520H Natural Gas Generating Sets Scope of supply: Engine, Alternator, Base Frame and boxes of ancillaries as delivered from Caterpillar as part of factory scope of supply. Complete engine inspection undertaken in july 2025. Turbo found to be in as-new condition. Cylinders found to be in as-new condition. Crankcase doors were removed to inspect crank and connecting rods, all found to be in as-new condition. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

A Grindingmaster wide belt sanding and brush deburring machine is available. Working width: 900mm, max. workpiece thickness: 150mm, belt speed: 20m/min, conveyor speed: 20m/min, table height adjustment: +/-75mm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 2000kg. The sanding brushes are defective. On-site inspection is possible.