cutter k g used for sale

Key data: 2000 KW, 2500 kVA, 400 V

Fifteen (15) New Caterpillar G3516H, 2000 kW, 400v. 50 Hz. Natural gas generator sets. These 2500 kVA units are set for continuous an parallel to gird applications. They come with a prelube pump, Jacket Water Heater, no CSA or EU certifications, 4.3 EMCP control panel, 1800 frame generator, open skids Manufacturing year 2024 & 2025.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: Greif, double grinding wheel type D 20/4 -Grinding discs: max. Ø 250 mm -Motor power: 0.37 kW -Speed: 1400 rpm -Operating voltage: 220/380 volts -Dimensions: 500/310/H315 mm -Weight: 40 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley -V-belt width: 13 mm -Mounting: Taper bushing Ø 28 x 25 mm (can be changed) -Dimensions: Ø 118 x 35 mm -Weight: 1.7 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 6-groove pulley -Art.No.: 168-06-00041000 -V-belt width: 13 mm -Mounting: Ø 38 mm -Number: 2x pulley available -Price: per piece -Dimensions: Ø 105 x 95 mm -Weight: 3.6 kg/piece

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 250 mm -Groove width: 14 mm, dimensions see photo technical drawing -Dimensions: 250/56/H41 mm -Weight: 2.4 kg

Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with groove, solid design -Groove width: 24/31 mm -Dimensions: see photos / technical drawing -Dimensions: 150/120/H95 mm -Weight: 7 kg

Key data: 250 KW, 250 kVA, 400 V

Package of 250kW Gas Generator for sale, see below the technical specification of the unit: Make: Scania Model: 6R20.1BO Rated Output: 250 kWe Fuel : Gas Serial No: 003837 YOB: 2014 Volt: 400 V Frequency: 50 Hz Speed: 1500 RPM Type: Containerised The unit has been maintained throughout its life and available on request upon inspection. The Containerised Package include the exhaust silencers, air ducting and table cooler radiator (pictures are attached). For any further enquiry and pricing information, feel free to reach us at: Enquiriesukpowergeneratorsltd 00447956518924

Key data: 2000 KW, 2500 kVA, 400 V

Emergency power system in containers Manufacturer: fmf group Type FPE 2500 MC Power: 2'000kW / 400/230V / 50Hz Control: ComAp InteliGen 500 Engine: - Manufacturer: Perkins - Type: 4016-61TRG3 with stem radiator - Speed: 1,500 min-1 Generator: - Manufacturer: Mecc Alte - Type: ECO46-1.5L4 Container: - 40-foot ISO container - Dimensions: 12'192x2'438x2'896mm - Insulation: thickness 50mm

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPB -V-belt width: 17 mm -Socket: Cone Ø 100 - 107 mm -Dimensions: Ø 220 x 82 mm -Weight: 10.7 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 7-groove pulley type SPA -V-belt width: 13 mm -Mounting: Taper bushing Ø42 x 125 mm (can be changed) -Dimensions: Ø143 x 125 mm -Weight: 9.5 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley type SPZ Ø 120 mm -V-belt width: 10 mm -Mounting: Ø28 x 52 mm -Dimensions: Ø120 x 52 mm -Weight: 2.2 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley type SPA Ø 102 mm -V-belt width: 13 mm -Mounting: Ø22 x 52 mm -Dimensions: Ø102 x 55 mm -Weight: 1.8 kg

Cable shredder Manufacturer GEM Type TS 1000 Year of construction 05/2016 • CE certificate: TS 1000 • Slip No: PCCE 1036 • Pressure: 100 bar • 75 kW motor power • Weight: 10,200 KG • Rotation Number: 88/min • Rotor length: 1,000 mm • Rotor width: 450 mm • Hydraulic slider 1,400 mm • Rotor knife 50x50x30mm hardened DIN 2379 • Engine manufacturer Gama • Radiator manufacturer Yilmaz 87 revolutions / minutes • Electronics manufacturer Siemens and ABB PLC control panel • Hydraulic pneumatic sieve changing mechanics

Stiebel Gear Type :4281.14.09903.97 Type.nr : 3622-505045314 Art.no : 1190103 Rexroth: 4281 . 14 . 09903 . 9 . 97 3622-505045314

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: DF 132-G90 S/6 -Speed: 22 rpm -Power: 1 kW -Shaft: Ø 40 x 80 mm -Protection rating: IP54 -Dimensions: 575/250/H240 mm -Weight: 42 kg

pneumatic angle grinder, Flex, grinding wheel, cut-off grinder, cut-off grinding machine, angle grinder -Max. discs: Ø 178 mm -Speed: max. 8500 rpm -Number: 74 angle grinders available Price: per piece -Weight: 4 kg/piece

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1745 rpm -Grinding discs: max. Ø 315 mm -Operating voltage: 380 volts -Weight: 230 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Peripheral speed: 45 m/s -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 290 kg

geared motor, electric motor -Speed: 101 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 25 kg

geared motor, electric motor -Speed: 121 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 30 kg

geared motor, electric motor -Speed: 36 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Number: 6x geared motors available Price: per piece -Weight: 36 kg

geared motor, electric motor -Speed: 36.5 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 36 kg

geared motor, electric motor -Speed: 36.5 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 36 kg

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 26 kg

geared motor, electric motor -Speed: 88 rpm -Power: 2.2 kW -Design: B5 -Recess: Ø130 mm -Bolt circle: Ø 165 mm -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 55 kg

geared motor, electric motor -Speed: 88 rpm -Power: 0.015 kW -Design: B5 -Shaft diameter: Ø 14 mm -Protection class: IP 65 -Weight: 6 kg

Key data: 500 KW, 400 V

Guascor SFGLD 360 CHP Including casing, chimney, control, fluegascooler, ventilation etc Running hours'; 32.000 Overhauled at 30.000 hours Guascor, Jenbacher, CHP, Gasgenerator. Gas, CHP, WKK, Heat, Elektricity

geared motor, electric motor -Speed: 104 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 17 mm -Protection class: IP 65 -Number: 5x geared motors available Price: per piece -Dimensions: 330/180/H140 mm -Weight: 7 kg

geared motor, electric motor -Speed: 37 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 20 mm -Protection class: IP 65 -Number: 3x motors available Price: per piece -Weight: 8 kg

geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg

geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg

geared motor, electric motor -Speed: 16.2 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 21 kg

geared motor, electric motor -Speed: 103 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 18 kg

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 23 kg

geared motor, electric motor -Condition: Geared motor is unused -Speed: 33 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 4x geared motors available Price: per piece -Weight: 20 kg

geared motor, electric motor -Speed: 13 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54/65 -Number: 2x motors available Price: per piece -Dimensions: 430/200/H180 mm -Weight: 17 kg

geared motor, electric motor -Speed: 13 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54/65 -Weight: 17 kg

geared motor, electric motor -Speed: 70 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 4x motors available Price: per piece -Dimensions: 460/204/H210 mm -Weight: 18 kg

Technical details Grinding length max. 600 mm Grinding width max. 350 mm Control conv. Distance from spindle center to table max. 525 mm Magnetic clamping plate 600 x 350 mm max. table load 400 kg Table longitudinal movement 660 mm Table speed 2 - 28 m/min Transverse movement 360 mm Grinding wheel dimensions max. 300 x 50 x 76.2 mm Clamping width max. 30 mm Drive power - grinding spindle 3.7 kW Total power requirement 8 kW Machine weight approx. 2.1 t Space requirements approx. 4.5 x 3.0 x 2.4 m

Geared motor, electric motor, three-phase motor -Speed: 784 rpm -Power: 0.12 kW -Design: B3 -Shaft diameter: Ø 13 mm -Protection class: IP 44 -Weight: 5 kg

Specifications Center width mm 1000 Tip height mm 300 Grinding length mm 1000 Workpiece weight between tips kg 800 Load on the workpiece spindle during on-the-fly grinding Nm 200 X-axis - infeed movement Feed speed mm/min 0.01-8000 Linear measuring system, internal resolution mm 0.0001 Z-Axis - Table Movement Table speed mm/min 0.01-8000 C-axis - workpiece headstock Speed min-1 0-300 Drive power kW 5 Pick-up taper MK 5 / KK 6 Grinding spindles Power grinding spindle motor with water cooling kW 15 Grinding wheel circumferential speed m/s 35 (63) Grinding wheel, standard mm 600x80x203.2 Tailstock MK 5 pick-up taper Workpiece Tension Spring Hydraulic Retraction

Gear motor, electric motor -Speed: 15/31 rpm -Power: 0.2/0.3 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 450/210/H200 mm -Weight: 24 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4.5 rpm -Power: 0.25 kW -Diameter shaft: Ø 40 mm -Construction: B3 -Protection class: IP 65 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 650/290/H320 mm -Weight: 50 kg

weight max.: 5 t stroke: 7000 mm clamping width: 10000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 38Hubwerk DemagAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Twist drills, automatic drills GÜHRING GHFW Ø 30 mm HSS DIN 1897 New ! Dimensions: 210 x 50 x 50 mm

Schunk Gripper Changing System GWK 125 (302514) Recommended weight: 170 kg Interlock detection: no Repeatability: ±0.04 mm Weight: 2.3 kg Max. locking distance: 2 mm Number of pneumatic feedthroughs: 8 Pneumatic feed-through with air connection thread: G1/8" Number of pneumatic feedthroughs: 2 Pneumatic feed-through with air connection thread: G1/4" Number of electrical feedthroughs: 36 Max. permissible XY offset: ±1.5 mm Max. permissible angle offset: ±1° Min. ambient temperature: 5 °C max. ambient temperature: 60 °C Min. operating pressure: 4.5 bar Max. operating pressure: 6 bar Max. torque Mx: 400 Nm Max. torque My : 400 [Nm] Moment Mz max. : 600 [Nm] Force Fz max. : 6000 [N] Force Fd max. : 9000 [N]

Conversion kit cylinder head, without thermocouple, new for the G9512 12 cylinder. We sell here a complete conversion kit Liebherr G9512, new for the Liebherr 12 cylinder gas engine. consists of the following items: 12x cylinder head; 3rd version, without thermocouple 10152182 12x cylinder head gasket; G9508/G9512 10118055 72x Cylinder Head Bolt; M18 x 2 x 246, G9512 9080476 24x Cylindrical pin 10470574 12x gasket; intake manifold, G9508/G9512 10118991 36x Six-round screw 10332845 12x Gasket; Exhaust Pipe, G9508/G9512 9078308 12x valve cover gasket; G9508/G9512 9079885 12x O-ring; valve cover, G9508/G9512 7381028 24x Cap Bolt; M12 x 80, G9508/G9512 4043173 2x O-ring; 144.5 x 3.00 7380154 24x sealing ring; 14.7 x 22 x 1.5 10011866 4x Expansion Joint; Exhaust Gas, G9508/9512 10133038 10x clamp; exhaust gas compensator 10144932 Shipping: DHL, DHL Express, freight ...

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 400 Kw, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 550 , Generator Volts: 230/400 , Generator Amps: 794 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/volvo-v550k-generator-550kva-u sed/193, , = More information =, , Empty weight: 3.625 kg, Type number: V550K GENERATOR 550KVA

Engine Brand: VOLVO, Condition: USED, Nominal Power @ Nominal Rpm: 450 Kw, Bore: 144 mm, Stroke: 165 mm, Engine Capacity: 16200 cc, Qty Cylinders: 6 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Power: 320 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 400 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 577 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/volvo-twd1630g-generator-400kv a-used/310, , = More information =, , Type number: TWD1630G GENERATOR 400KVA