cutter k g used for sale

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 10 grooves, unused -V-belt width: 22 mm -Taper bushing recording: Ø 100 x 100 mm (can be changed) -Dimension: Ø325 x 265 mm -Weight: 66 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 12 grooves -V-belt width: 17 mm -Intake: Ø85 x 175 mm -Dimension: Ø260 x 235 mm -Weight: 40 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 8 grooves -V-belt width: 17 mm -Receptacle: Ø 97/90 x 60 mm for taper clamping bush (Ø can be changed) -Dimensions: Ø 225 x 157 mm -Weight: 18kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 4 grooves -V-belt width: 17 mm -Intake: Ø75 x 140 mm -Dimension: Ø260 x 140 mm -Weight: 15 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 4 grooves -V-belt width: 17 mm -Receptacle: taper bushing Ø 48 x 50 mm (can be changed) -Dimensions: Ø 260 x 80 mm -Weight: 26.1kg

V-belt pulley, belt pulley -V-belt pulley: pulley 1 groove -Item No.: G194509 9 / Z 10 950 / JDM 215 -V-belt width: 25 mm -Intake: Ø 30 x 38 mm -Dimension: Ø 340 x 100 mm -Weight: 7 kg

for sale GIS Piston Compressor GS25/150/400/T Boiler capacity 150 litres Suction capacity 400 min./l Motor 3 HP, 400 V mobile Total weight approx. 80 kg Other models available, inquiry to FSA Maschinen AG

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley SPA 180-4 -V-belt width: 13 mm -Receiver: Taper bushing Ø 55 mm (can be replaced) -Quantity: 1x V-belt pulley available -Dimensions: Ø 185 x 65 mm -Weight: 7.6 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 160-4 -V-belt width: 13 mm -Receptacle: Ø 55 mm taper bushing 2517-55 (can be changed) -Quantity: 1x V-belt pulley available -Dimensions: Ø 167 x 65 mm -Weight: 5.8kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley -V-belt width: 17 mm -Receiver: Taper bushing Ø45 x 50 mm (can be replaced) -Dimensions: Ø 220 x 80 mm -Weight: 13.1 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: 4-groove pulley 4SPB 3020 55 -V-belt width: 17 mm -Receptacle: Ø 55 mm for taper bushing 3020 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 255 x 80 mm -Weight: 14kg

Key data: 200 KW, 250 kVA, 400 V

Make Olympian Model: GEH275-4 Year of manufacturing: 2014 Serial nr: OLY00000VMPN08908 Working hours (on servicemeter): 7899 Capacity (KvA) 275 hrs / 250 prp Capacity (Kw) 220 hrs / 200 prp Engine make Perkins Engine model 1300 series Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Rpm 1500 Amperes (A) 397 Dimensions LxWxH (mm) 3050 x 1050 x 1850 Weight (Kg) ca 2500 Total quantity in stock 1 Country of origin United Kingdom Comments Fair used generatorset

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 5 grooves type SPA 160x5 2517 -V-belt width: 13 mm -Receptacle: Ø55 x 45 mm taper clamping bushing 2517 (can be changed) -Dimension: Ø165 x 80 mm -Weight: 6.3kg

V-belt pulley, pulley -V-belt pulley: 4-groove pulley 4SPB 224 -V-belt width: 17 mm -Receiver: without bore -Number: 2x pulleys available -Price: per piece -Dimensions: Ø 230 x 80 mm -Weight: 11.8 kg/pc.

V-belt pulley, pulley -V-belt pulley: pulley with 8 grooves -V-belt width: 17 mm -Holder: Ø 80 x 160 mm, groove 22 mm -Hole spacing: 130mm M16 -Dimensions: Ø 212 x 160 mm -Weight: 28.5 kg

V-belt pulley, pulley -V-belt pulley: pulley with 6 grooves -V-belt width: 17 mm -Holder: Ø38 x 80 mm -Dimension: Ø205 x 120 mm -Weight: 12.4 kg

Key data: 2188 , 2712 , 6300

I am pleased to inform you that I am offering for sale a complete power plant 2188 kW Jenbacher 616 GSE power plant Below are the details of the equipment: - Genset Operating Hours: 81 344 hours - Major Overhaul: at 64 973 operating hours - Complete control boards new and new DIANE XT4 in: 2021

Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: Lenze, geared motor type GST04-2M VCK 071C32 -Speed: 44.6 rpm / Torque: 77 Nm -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP55 -Dimensions: 395/200/H160 mm -Weight: 11.7 kg

Key data: 480 , 600 , 400

2007 Caterpillar G3508 Gas Generator Manufacturer: Caterpillar Model: G3508 Year of manufacturing: 2007 Rated Output Power: 480 KW Speed: 1500 RPM Voltage: 400 V Frequency: 50 Hz Condition: Used Fuel: Gas Sr. No: CTN00375 Ar. No: -2197 Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection, and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

Gear motor, electric motor, electric gear motor -Manufacturer: Müller & Georg, geared motor type ZGO G3 K 4 -Speed: 160 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 22 x 50 mm -Protection rating: IP 54 -Dimension: 450/158/H205 mm -Weight: 14.8 kg

Inv. Num. : 7723 Type: ZRM9 Producer: Ernst Grob Generated: Parameters: The machine is used to produce involute grooves by extrusion. Accessories: Several grave goods Universal Gear wheels

Fast delivery time! 4x Containerized Siemens G-86EM • Engine; Siemens G-86EM • Year of Construction 2024 • Operation hours; 0 (NEW!) • Electric power; max 2013kWe • Mechanical efficiency; 45,6% • Electrical efficiency; 45,7% • Voltage; 400/415V • Speed; 1.500 RPM • Frequency; 50Hz Gasgenerator, gas, generator, CHP, Power generation only, BHKW, WKK, Combined heat and power, gas genset. Power plant

Key data: 1011 , 400

Fast delivery! Gasgenerator Natural gas or Biogas Brand; Siemens Type; SGE-42HM Power; 1,011kWe RPM; 1500RMP Voltage; 400V Frabrication year; 2020 Guascor, Siemens, CHP, Gasgenerator, Biogas, Syngas, Jenbacher, MWM, MTU, Spareparts

6x Containerized Guascor/Siemens G-86EM • Engine; Siemens G-86EM • Year of Construction; 2021 • Operation hours; 12,000 • Electric power; max 2013kWe • Mechanical efficiency; 45,6% • Electrical efficiency; 45,7% • Voltage; 690V • Speed; 1.500 RPM • Frequency; 50Hz

Gearbox, bevel gear, worm gear -Manufacturer: DZ transmissioni, double bevel gear -Translation: i = 1:1 -Shafts: Ø 20 x 50 mm -Rotation direction: counter-rotating, see photo -Dimensions: 410/240/H75 mm -Weight: 7.5 kg

Gearbox, spur gear, angle gear, worm gear -Manufacturer:GHIRRI CESARE, worm gear type VQ 03 -Translation: R. 1/10 -Hollow shafts: Ø 11 x 28 mm / Ø 14 x 62 mm -Dimensions: 105/90/H110mm -Weight: 1.3 kg

Key data: 6 KW, 7 kVA, 400 V

Emergency power generator, power generator, Bauer GFS-6 ATS, unused, orig. packaging, never been in use! Continuous power of 6 kW / 7.4 kVA. LxWxH 1,070 mm x 745 mm x 815 mm Weight 180 kg Net weight. Easy operation and maintenance. Specifications: Max. power [kW/kVA/HP] 6.5 / 8 / 8.87 Continuous power [kW/kVA/HP] 6.0 / 7.4 / 8.15 Nominal voltage [V] 230 / 400V Frequency [Hz] 50 Speed [rpm] 3000 Power factor [cos f] 0.8 Tank capacity [L] 20 Housing colour RAL 3000 Running time approx. 8-10 hours per tank Operating noise: Sound pressure level LPA [7m] [db(A)] 75 Engine: Power 8 kW / 9.0 kVA / 10.8 hp 1 cyl. Diesel Fuel Type: Diesel Emission standard: none Number of cylinders 1 Starter Electric with Battery On-board voltage [V] 12V Battery voltage [Ah] 230 / 400V Cooling System Air Cooling Generator: Model 6.5 kW 3000 rpm Generator system Brushless, self- ...

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley -V-belt width: 17 mm -Mounting: Taper bushing Ø 40 x 30 mm (can be changed) -Dimensions: Ø 187 x 44 mm -Weight: 5.7 kg

V-belt pulley, belt pulley -V-belt pulley: 4-groove pulley -V-belt width: 22 mm -Hole: Ø 42 x 112 mm -Dimensions: Ø 180 x 130 mm -Weight: 8.3 kg

Geared motor, electric motor, electric geared motor -Condition: Geared motor is unused -Speed: 59 rpm -Power: 22.0 kW -Design: B3 -Protection rating: IP55 -Shaft: Ø 70 x 140 mm -Dimensions: 1100/400/H435 mm -Weight: 336 kg

Cogeneration Power plant CHP Natural Gas Generator Caterpillar Type G3516B Year 2008 Power 1431 kVA Operatir running hours 42336h Scope of supply : Control panel Gas line Heat exchanger Transformers 1250 kVA Table cooler Battery All schedules and loc books Full power plant ready to work ! AVAILABLE NOW Price load on truck 75.000€ For more information about this generator please contact us.

ogeneration Power plant CHP Natural Gas Generator Caterpillar Type G3516B Year 2008 Power 1431 kVA Operatir running hours 42336h Scope of supply : Control panel Gas line Heat exchanger Smoke exchanger Transformers 1250 kVA Table cooler Battery All schedules and loc books Full power plant ready to work ! AVAILABLE NOW, ready to load Price load on truck 75.000€ For more information about this Generator please contact us.

Key data: 2013 KW, 690 V

• Engine; Siemens G-86EM • Year of Construction; 2021 • Operation hours; 12,000 • Electric power; max 2013kWe • Mechanical efficiency; 45,6% • Electrical efficiency; 44,4% • Voltage; 690V • Speed; 1.500 RPM • Frequency; 50Hz • Delivery time; Early December • Power generation only, can be equipped with heat coupling • Fat tested, R1 Overhauled (Liners, conrods etc) We can also deliver 690/10.500V Transformators/Transformers Gasgenerator, Gas, CHP, WKK, Power generation, Generator, Alternator, Guascor, Siemens, Jenbacher, MWM, MAN, MTU. Containerized,Waukesha,Power,

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 450 x 6 TB 4040 -V-belt width: 17 mm -Mounting: Taper bushing Ø 80 mm (can be changed) -Dimensions: Ø 455 x 120 mm -Weight: 42 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 315 x 6 -V-belt width: 17 mm -Mounting: Taper bushing Ø 75 mm (can be changed) -Dimensions: Ø 320 x 120 mm -Weight: 28 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 3-groove pulley type SPA 355x3 -V-belt width: 13 mm -Mounting: Taper bushing Ø 48 mm (can be changed) -Dimensions: Ø 360 x 50 mm -Weight: 14 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 8-groove pulley type SPB 224x8 TB 3535 -V-belt width: 17 mm -Mounting: Taper bushing Ø 60 x 90 mm (can be changed) -Dimensions: Ø 230 x 160 mm -Weight: 25 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 4-groove pulley type SPB 250 4 Bush 3020 -V-belt width: 17 mm -Holder: cone Ø 101 - 107 mm for taper bushing 3020 -Dimensions: Ø 260 x 80 mm -Weight: 12.4 kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPA 300 4 3020 -V-belt width: 13 mm -Hole: Ø 55 x 50 mm taper bushing 3020 (can be replaced) -Dimensions: Ø 300 x 65 mm -Weight: 14.1 kg

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley SPB-200-5 -V-belt width: 17 mm -Holder: Ø60 x 50 mm taper clamping bush 3020 (Ø can be changed) -Dimensions: Ø200 x 100 mm -Weight: 12.1 kg

servo motor, electric motor, DC motor, stepper motor, stepping motor, compact asynchronous motor -Manufacturer: phytron, stepper motor type ZSS 52-200-2.5 25:1 -Manufacturer gearbox: Gysin type GPL 052-2S/25-1 i 1/7 -Dimensions: Ø 82 x 185 mm -Total weight: 2.9 kg

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley -V-belt width: 17 mm -Hole: Ø38 x 96 mm -Dimensions: Ø150 x 180 mm -Weight: 6.5 kg

Key data: 2500 KW, 3125 kVA, 400 V

Twelve (12) New Caterpillar G3520H, 2500 kW, 400v. 50 Hz. Natural gas generator sets. These 3125 kVA units are set for continuous an parallel to gird applications. They come with a prelube pump, Jacket Water Heater, no CSA or EU certifications, 4.3 EMCP control panel, 1800 frame generator, open skids Manufacturing year 2024 & 2025

Key data: 2000 KW, 2500 kVA, 400 V

Fifteen (15) New Caterpillar G3516H, 2000 kW, 400v. 50 Hz. Natural gas generator sets. These 2500 kVA units are set for continuous an parallel to gird applications. They come with a prelube pump, Jacket Water Heater, no CSA or EU certifications, 4.3 EMCP control panel, 1800 frame generator, open skids Manufacturing year 2024 & 2025.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: Greif, double grinding wheel type D 20/4 -Grinding discs: max. Ø 250 mm -Motor power: 0.37 kW -Speed: 1400 rpm -Operating voltage: 220/380 volts -Dimensions: 500/310/H315 mm -Weight: 40 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley -V-belt width: 13 mm -Mounting: Taper bushing Ø 28 x 25 mm (can be changed) -Dimensions: Ø 118 x 35 mm -Weight: 1.7 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 6-groove pulley -Art.No.: 168-06-00041000 -V-belt width: 13 mm -Mounting: Ø 38 mm -Number: 2x pulley available -Price: per piece -Dimensions: Ø 105 x 95 mm -Weight: 3.6 kg/piece

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 250 mm -Groove width: 14 mm, dimensions see photo technical drawing -Dimensions: 250/56/H41 mm -Weight: 2.4 kg

Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with groove, solid design -Groove width: 24/31 mm -Dimensions: see photos / technical drawing -Dimensions: 150/120/H95 mm -Weight: 7 kg