cutter k g used for sale

Gear motor, electric motor -Speed: 32 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 17 mm -Protection class: IP 54/65 -Number: 4x gear motors available -Price: per piece -Dimensions: 280/120/H170 mm -Weight: 7 kg

Ref. -No.: 10332 Manufacturer: GEORG MüLLER Year of construction: 1969 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Germany Machine length: 1200 mm Machine width: 800 mm Machine Height: 1800 mm Grinding height: 120 - 200 mm Max. Grinding length: 310 mm Grinding Width: 175 mm Total Power Requirement: 2,8 kW Weight Of The Machine Ca.: 0,4 t Grinding head adjustment (vertical): 165 mm Max. grinding head infeed: 12 mm magnet clamping surface: 250 x 150 mm Grinding wheel dimensions: 170 x 100 x 76 mm Grinding spindle - speed: 2850 RPM Grinding spindle drive: 2,2 kW Drive motor power: 380 V

Ref. -No.: 10280 Manufacturer: GUCBAR Year of construction: 2021 Art: Diesel model: GJB9500-E3 Dimensions (L x W x H): 720x560x585 Weight: 98 rated capacity: 8.0 Maximum power: 7.5 phase: 3 engine: SC192FB

Gear motor, electric motor, electric gear motor -Speed: 42.5 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 17 mm -Protection class: IP 65 -Price: per piece -Number: 1x available -Dimensions: 295/170/H160 mm -Weight: 7.8 kg

Unused, soundproofed, rollable, diesel generator set built in 2023 with key start Manufacturer: PLUS POWER Type GF2-6 - Electric Start Power 7 kVA 5,5KW Year of construction 2023 Hours 0 Engine 1 cyl, diesel with starter and battery, very economical! Key Start Generator 3 phase, 220/380V, 9.5A, 50Hz, Soundproofed incl. spare fuel filter, air filter and heavy-duty rollers. Dimensions width approx. xxcm, depth approx. xxcm, height approx. xxcm, weight approx. xxkg. Unused, immediately available. The device must be filled with engine oil before it can be put into operation! Incl. spare air filter, spare fuel filter, heavy-duty rollers, hopper. Imported by: MEDIAMQ OP VALENCIA S.L. C/ Bonaire 4 46389 Turis (Valencia) Spain Sale price

Demonstration unit with 7 operating hours, 3 phases, 50KVA, 230/400Volt! Soundproofed diesel generator set, ready for immediate use! Manufacturer: PLUS POWER Type GF2-50 - Electric Start Power 50kW 90A Generator Stamford UC224E/S1L2-Y1 3 Phase, 230/400V, 50A, 50Hz, 63KVA Engine Ricardo type N4105ZDS, 56kW , 1.500 rpm, 4 cyl, diesel Key Start Soundproofed Dimensions width approx. 225cm, depth approx. 94cm, height approx. 120cm, weight approx. 1,020kg. Ready to use, immediately available.

geared motor, electric motor -Speed: 36 rpm -Power: 0.055 kW -Design: B5 -Shaft diameter: Ø 10 mm -Protection class: IP 54/65 -Quantity: 1 available -Dimensions: 250/160/H115 mm -Weight: 4.1 kg

geared motor, electric motor -Speed: 27 rpm -Power: 0.055 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 54/65 -Price: per piece -Quantity: 2 available -Dimensions: 280/120/H120 mm -Weight: 6.8 kg

Soundproof Diesel Generator Set Emergency Generator Set Manufacturer: Lucla Type GLU-33-SK Specifications Continuous power: 30 kVA Standby power: 33 kVA Mains voltage: 400/230 V Amperage: 43.3 A Max. sound level: dB(7m) =78 Engine: KOFO Model: K4100D Intake system: naturally aspirated engine Fuel Injection System: Eddy Number of cylinders: 4 Displacement: 3,613 L Bore x stroke: 100x115 mm Compression Ratio: 20:1 Nominal speed: 1500 r/min Engine power: 33 kW Controller: Mechanical Starting voltage: 12 V Generator: Lucla Model: LU 184GS Phase: 3 Voltage: 400 V / 230V 43.3A Line type: 3 phase 12 cable, Y type Stock: 1 Power factor (cos f): 0.8 Frequency: 50 Hz Continuous power: 30 kVA / 24KW Arousal Type: Brushless, Self-Arousal Voltage Regulation: % ±0.5 Protection class: IP 23 Degree of insulation: H Altitude(above sea level): m =1000 Controller: ...

Gear motor, electric motor -Speed: 65 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 1x engine available -Price: per piece -Dimensions 360/180/H175 mm -Weight: 12.2 kg

Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.

Gear motor, electric motor -Speed: 56 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: Ø 45 mm -Protection class: IP 54 -without breaks -Dimensions: 650/280/H300 mm -Weight: 50 kg

Gear motor, electric motor, electric gear motor -Speed: 18 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 17 mm -Protection class: IP 54/65 -Price: per piece -Number: 2x available -Dimensions: 280/145/H140 mm -Weight: 6.7 kg

Gear motor, electric motor, three-phase motor -Speed: 15/60 rpm -Power: 0.1/0.45 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 410/210/H190 mm -Weight: 24 kg

Gear motor, electric motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 1x geared motors available -Price: per piece -Weight: 31 kg

Complete UF system by GEA For concentration of products . Previously used for Yoghurt . All details are in the images attached . Contact us for more information and would you like to inspect.

Gear motor, electric motor, three-phase motor -Speed: 31.5/63 rpm -Power: 0.25/0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44/55 -Price: per piece -Number: 2x available -Dimensions: 405/190/H160 mm -Weight: 17 kg

geared motor, electric motor -Speed: 85 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Price: per piece -Quantity: 1 available -Dimensions: 450/205/H200 mm -Weight: 20 kg

geared motor, electric motor -Speed: 128 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 65 -Quantity: 1x geared motor available -Dimensions: 390/130/H210 mm -Weight: 8.9 kg

One used flexible welding line EVG GH400 for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series

geared motor, electric motor -Speed: 128 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 65 -Brake: 24 V -Quantity: 15x geared motors available Price: per piece -Dimensions: 390/130/H210 mm -Weight: 12 kg

Gear motor, electric motor -Speed: 30.5 rpm -Power: 0.55 kW -Brake: 440 V -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 605/250/H215 mm -Weight: 36 kg

SPARE PART E0033 Drive motor for Heidelberg GTO 46 From 1979 Model Ma No.: 665369 With pulley HDM: 42.101.051 1.5 KW SPAREPART E0033 Driving motor for Heidelberg GTO 46 From 1979 model / serial: 665369 Include disk HDM: 42.101.051 1.5 KW

Brand: GME Bavelloni Type: Glassdrill + table Model: VT1250 Chassis number: 10.02.007 Construction year: 1995 Length mm: 2200 Width mm: 1000 Height mm: 1900 Transport size L x W x H: 2,5 x 2,2 x 1,9 Condition machine : Overhauled Photos/film available: Photos available Remaining: Equipped with laser Remaining: Stretch works on air Remaining: Double-sided drill, bottom and top

Fives Pillard Gas Burner GRC-G3 Burner from 2015. 19.75 MW x 21,000 m3/h. Manufacturer: Fives Pillard Model No.: GRC-G3 Type: Gas Burner Serial Number: 205991C3 / 205991C3 Heat output [MW]: 2.82 – 19.75 Air flow rate [m3/h]: 3,600 – 21,000 Year of construction: 2015 Hours:– Weight [kg]: 610

geared motor, electric motor -Speed: 26/80 rpm -Power: 0.18/0.55 kW -Design: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Brake -Dimensions: 525/200/H200 mm -Weight: 28 kg

Gear motor, electric motor -Speed: 48 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: Ø 45 mm -Protection class: IP 54 -Brake -Dimensions: 650/260/H280 mm -Weight: 56 kg

Gear motor, electric motor, three-phase motor -Speed: 182 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -with electrical separating coupling KEB type Combibox -Dimensions: 620/200/H260 mm -Weight: 38 kg

TO WHOM IT MAY CONCERN ;

Gear motor, electric motor, three-phase motor -Speeds: 2 rpm -Power: 0.075 kW -Construction: B14 -Shaft diameter: Ø 12 mm -Protection class: -Dimensions: 250/140/H120 mm -Weight: 4.5 kg

Nicotra Gebhardt ZDS 20-0071 Pedestal Silencer Pedestal silencer for inlet side sound attenuation of roof fans Manufacturer: Nicotra Gebhardt Type: ZDS 20-0071 Pedestal silencer Flat roof plinth galvanized steel sheet More items - new and used - can be found in our shop! International shipping costs on request!.

Control:Fanuc 160 i - M axis travel range X 650 mm Y 300 mm Z 300 mm C +150?/-60? taper ISO50 dimension grinding wheel 250mm speed of grinding spindle ? 9000 rpm grinding flange included, machine has spindle cooling, dust extraction. made in Schwi

Control: Max.travel range: X mm Y mm Z mm Wave length: um Average power: Watt Max. peak pulse power: kW Laser crystal: the beam source is damaged Made in Germany

Gear motor, electric motor -Speed: 250 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Dimensions: 440/220/H160 mm -Weight: 14.45 kg

Bamburi: 70 L. Brand: Guix, model: 7 70, engine: 270/180 hp, 220 V, at 980/490 rpm. Rebuilt Chamber, New Bearings, Rebuilt Mazes, Spring-Loaded Maze Caps

Gear motor, electric motor -Speed: 60 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Brake -Number: 1x geared motors available -Price: per piece -Dimensions: 415/170/H120 mm -Weight: 37 kg

Gear motor, electric motor, electric gear motor -Speed: 188 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 12 mm -Protection class: IP 65 -Dimensions: 265/138/H117 mm -Weight: 4.3 kg

V-belt pulley, belt pulley -Diameter: 460 mm -Total width: 265 mm -Straps: 10 -V-belt width: 22 mm -Take: Ø 160 mm -Number: 1x pulleys available -Price: per piece -Weight: 78 kg -other pulleys in stock

V-belt pulley, belt pulley -Diameter: 322 mm -Total width: 185 mm -Straps: 8 -V-belt width: 17 mm -Take: Ø 90 mm -Pulley: balanced -Number: 2x pulleys available -Price: per piece -Weight: 38 kg -other pulleys in stock

V-belt pulley, belt pulley -Diameter: 450 mm -Total width: 130 mm -Straps: 6 -V-belt width: 17 mm -Take: Ø 90 mm -Pulley: balanced -Weight: 48 kg -other pulleys in stock

V-belt pulley, belt pulley -Diameter: 480 mm -Total width: 240 mm -Straps: 9 -V-belt width: 22 mm -Socket: Ø 124 mm -Pulley: balanced -Weight: 95 kg -other pulleys in stock

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -Diameter: 507mm -Total width: 158 mm -Strap: 8 -V-belt width: 17 mm -Taper socket recording: Ø 70 mm (can be changed) -Pelt: balanced -Weight: 61kg -other pulleys in stock

V-belt pulley, belt pulley -Diameter: 570 mm -Total width: 237 mm -Straps: 9 -V-belt width: 22 mm -Take: Ø 90 mm -Pulley: balanced -Weight: 127 kg -other pulleys in stock

V-belt pulley, pulley -Diameter: 460 mm -Overall width: 278 mm -Belts: 10 -V-belt width: 22 mm -Hole: Ø 95 mm -Pulley: balanced -Weight: 144 kg -other pulleys in stock

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Admission wheel recess: Ø 160 mm -universal: applicable -Number: 2x motors available -Price: per piece -Dimensions: 190/190/H342 mm -Weight: 70 kg/piece

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

Gear motor, electric motor -Speed: 104 rpm -Power: 0.37 KW-S4-50% -Frequency: 50 Hz -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Price: per piece -Number: 9x available -Dimensions: 530/205/H200 mm -Weight: 22 kg

Gear motor, electric motor -Speed: 66 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: -Dimensions: 445/210/H220 mm -Weight: 27 kg

Gear motor, electric motor, three-phase motor -Connection: 400/230 volts -Power: 0.45 kW -Rotation speed -Construction: B5 angle -Diameter shaft: Ø 10 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 190/160/H100 mm -Weight: 2.5 kg

Gear motor, electric motor, three-phase motor -Fan cover: defective -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 5x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg