cutter k g used for sale

Manufacturer: CATERPILLAR Model: G3516B LE Type: Stationary to Gas Working Cycle: 04 times water cooled Nominal Rotation: 1,800 RPM Number of Cylinders: 16 Cylinders, arranged in V Piston diameter --mm: 170 mm Piston stroke -mm: 190 mm Engine Volume: 69 Liters Compression Ratio: 11.1:1 Suction: Turbocharged, Post-Cooled Fuel System: Electronic Ignition System Quantity: 02 units

BOSCHERT GIZELIS G-CUT 3013 CNC hydraulic guillotine shears were built in 2021 in Greece by BOSCHERT GIZELIS.CO. The machine is used for precision cutting of sheet metal made of, among others, ST42 steel and stainless steel with a maximum thickness of 13 mm. It is also possible to cut thicker materials if these have a lower tensile strength. The machining process is performed by means of precise, hardened cutting knives with automatic adjustment of the gap between blades. The positioning of the material is facilitated by a work table with integrated balls on which the workpiece goes directly under the cutting line. Along the cutting line, in turn, hydraulic material hold-downs are used to ensure that the sheet is held firmly in place during machining. The G-CUT 3013 is offered with a number of state-of-the-art systems that expand the machining possibilities and make daily work easi ...

3516 Diesel Generator Set Just 1032 WORKING HOURS!

Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55

Max. width of cutting: 530 mm The temperature of the meat block: up to -25 C The Control panel mounted on the machine Installed power: 32 KW Power supply: 380 V, 50 Hz Dimensions of machines in cm: Width: 200 Length: 190 Height: 210 Delivery time: 30 working days after advanced payment

; Gross weight [kg]: 3621; Engine: Cummins 6CTAA9.5-G1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 640

; Gross weight [kg]: 18000; Engine: Baudouin 12M26 G1000/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Fuel tank available but capacity unknown., 40FT dimensions with twistlocks

SUMAB is currently offering a horizontal steam generator. Technical details: Capacity 1500 kg/h, allows you to produce steam in a short period of time. Pre-installed accessories are ready to run. A two part platform for easy assembly on site. Includes: water softening device, condensate tank, cavitation preventing pump, by-pass group with float trap, all fittings and piping connections.

Arc welder Type: Euromag 35-2 Manufacturer Messer Griesheim

Stock No.: 2107 1 used, partially overhauled and function-tested strand granulator with >> Granules Cutting Lengths Adjustment ( SV ) Manufacturer COMAC - Italy Type SG-100 SV Strand inlet width 100 mm cutting rotor width 110 mm, Parallel section rotor with 32 teeth Rotor Ø 200 mm >> strand pellet cutting length adjustment 2 drives: 1x for cutting rotor - 4 kW 1x for feed roller 1.5 kW with STOBER reduction gear Soundproof housing of the pelletizing chamber Visit / test run possible shortly by appointment. We also have matching strand cooling basins, strand blowers and classifying screens available from stock. Further strand granulators and other pelletizing systems/plants available from stock ( water ring - , hot impact and underwater pelletizing )

Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Brigon, accessories pressure measuring devices -Measuring liquid: green HDM -Measuring range: up to 30 mbar -Dimensions: 95/50/H385 mm -Weight: 0.6 kg

Angle grinder, cutoff grinder -Grinding wheels: Ø 180 mm -Power: 2300 W -Speed: 8500 rpm -Dimensions: 525/180/H140 mm -Weight 6.5 kg

Turbogas Turbine GE5/1 5MW Natural gas for sale. Complete turbogas turbine plant with electric generator, recovery boiler and exchangers, dry cooler, diverter. Total Hours: 36,000 8,000 hours from the last overhaul. THERMAL POWER 9,0 MWt Saturated steam production 13,000 kg/h at 10BARg Voltage 11000 V Frequency 50 hZ Also available: - GE5/1 used turbine in nitrogen storage with 72,000 hours + 8,000 Hours after the last overhaul + one used generator Price: €240,000. - NEW GE5 Turbine Spare Parts (value 1 million) Price : €320,000. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.

Key data: 529 , 400

AVAILABLE FOR SALE! USED GAS GENEARATORS SET. MAKE: JENBACHER TYPE: J212 GSB 21 POWER RATING: 529 KW FUEL: NATURAL GAS YEAR:2002 HOURS: 43.000 ALTERNATOR: AVK - STAMFORD ,400V, 50HZ, 1500 RPM EXCELLENT CONDITION. Engine has been overhauled and upgraded with New control system SCOPE OF DELIVERY: ENGINE+ALTERNATOR CONTROL PANEL GAS STREET

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 300 x 32 mm -Operating voltage: 380 volts -Dimensions: 830/600/H1200 mm -Weight: 231 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: ABM -Gearbox manufacturer: ABM -Motor power: 0.37 kW -Speed: 45 rpm -Construction: B3 -Drive shaft: Ø 30 mm -Protection class: IP 44/54 -Dimensions: 550/230/H195 mm -Weight: 30 kg

MAX DIAMETER 640 MAX MODUL 8 TABLE DIAMEER 550

DC motor, servo motor, gear motor, electric motor, direct current, gear motor -Voltage: 180/200 V -Power: 0.18/0.27 kW -Construction: B3 angle -Shaft: Ø 14/30 mm -Dimensions: 310/155/H150 mm -Weight: 7 kg

Mitre saw Brand: Graule Type: H8 J2 169 saw blade Ø 250mm swivable saw blade 45 °

Emergency power gas turbine from 1977 with few running hours, without generator and controller. 1 available 456 KW x 1,500 1/min Manafacture: Garrett Model No.: ME831-800A Type: Gas turbine Serial Number: P-830005 Power [KW]: 456 Year of construction: 1977 Weight [kg]: 915 Dimensions LxWxH [cm]: 270x120x120

Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Complete Waukesha CHP power plant Including: Generator set Heat recovery Silincer Exhaust pipe Pumps Pipes Oil system Gas line Sound proof housing Air in and outlet The complete installation is in good condition and directly available. GAS POWER HOLLAND 00316 38 63 90 71

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 180 x 60 mm -Speed: 2980 rpm -Motor power: approx. 0.9 kW -Operating voltage: 380 volts -Dimensions: 520/400/H1420 mm -Weight: 140 kg

Various roller mills, grain mills, trough screws, plansifters, filter systems, screening plant, grain vibrators Manufacturer: GOLFETTO and BÜHLER The machines come from a flour mill and were in operation until they were shut down. The plant is currently being dismantled. We want to sell the machines as directly as possible from the location in Austria. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Gear motor, electric motor, three-phase motor, electric gear motor, brake motor -Speed: 30.5 rpm -Power: 0.25 kW -Construction: B3 -Brake: 4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP 54 -Dimensions: 410/200/H170 mm -Weight: 15 kg

Truck bed with crane, workshop and power supply in very good condition! Arpo loader crane type Hummel GSK 500 CE year 2015, rope 5mm length 15m, load capacity max 500kg, at 1.5m radius max 350kg. Loading area for mounting on trucks or as a trailer body. Was mounted on truck Mitsubishi Fuso Canter 4x4 DOKA 6C18D Year of construction 2015, manufacturer GEWA Fahrzeugbau. ARPO crane with electric winch, lifting capacity 350kg at radius 1.5m Structure with lockable sliding door, inside small ALUCA workshop with workbench, Drawer cabinets with 100% pull-out, vice, LED lighting and power distribution 400 volts and 220 volts.

Cordless riveting tool, blind rivet gun, blind rivets -Transfer in current condition as seen -The device works, the batteries are defective -without: batteries -Dimensions: 345/90/H250 mm -Weight: 5.3 kg

Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.25 kW -Design: B5 -Shaft: Ø 25 x 60 mm -Bolt circle: 130 mm -Recess: 110 mm -Protection class: IP 55 -Dimensions: 400/160/H220 mm -Weight: 17 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 215 rpm -Power: 0.3 kW -Protection class: IP 20 -Quantity: 6 available -Price: per piece -Weight: 6.5 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Power: 0.5 kW -Dimensions: 400/270/H160 mm -Weight: 22 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 120 rpm -Power: 0.2 kW -Protection class: IP 44 -Quantity: 4 available -Price: per piece -Dimensions: 310/90/H180 mm -Weight: 7.6 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.25 kW -Protection class: IP 20 -Quantity: 5 available -Price: per piece -Dimensions: 270/130/H190 mm -Weight: 7.1 kg

Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder, tool grinding machine -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: Ø 300 mm -Operating voltage: 380 volts -Dimensions: 1080/480/H1240 mm -Weight: 252 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.4 kW -Protection class: IP 20 -Quantity: 2 available -Price: per piece -Dimensions: 310/132/H190 mm -Weight: 10 kg/piece

Gear motor, electric motor -Motor comes from: Gansow scrubber dryer -Connection: 24 volts -Speed: 160 rpm -Power: 1 kW -Shaft diameter: Ø 25 mm -Number: 8 available -Price: per piece -Dimensions: 390/140/H160 mm -Weight: 13 kg

Motor for gripping hoist/hoist, hoist motor, multi-purpose hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Type: T90L/10-4F -Power: 2.2 kW -Speed: 1410 rpm -Toothed shaft: Ø 28 mm -Module: - mm -with: brake -Dimensions: 505/175/H280 mm -Weight: 31 kg

V-belt pulley, pulley -for compressor with blades -Diameter: 620mm -Strap: 2 -V-belt width: 13 mm -Receptacle cone: 17/25 mm long -Weight: 18kg -only one piece available

Gear motor, electric motor, electric gear motor -Speed: 57 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 22 mm -Protection class: IP 54 -Quantity: 1x available -Dimensions: 455/155/H195 mm -Weight: 18.8 kg

Gear motor, electric motor -Speed: 4.2 rpm -Power: 0.1 kW -Construction: B3 angle -Shaft diameter: Ø 12 mm -Protection class: IP 44 -Dimensions: 240/155/H130 mm -Weight: 4.7 kg

Gear motor, electric motor -Speed: 170 rpm -Power: 0.1 kW -Construction: B3 angle -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Weight: 4.5 kg

Key data: 1600 KW, 1935 kVA, 400 V

We are selling our complete containerized Natural Gas power plant based on a MTU 4000 V16 gensets with 1600 KW power output. The power plant has a total working hours from new of 40 800

Gear motor, electric motor -Speed: 107 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 17 mm -Protection class: IP 23 -Number: 2x motor available -Price: per piece -Dimensions: 395/140/H190 mm -Weight: 11 kg

Gear motor, electric motor -Speed: 55 rpm -Power: 0.18 kW -Brake: 24 V -Construction: B5 -Diameter shaft: Ø 17 mm -Protection class: IP 65 -Dimensions: 395/185/H140 mm -Weight: 12.8 kg

Gear motor, electric motor, three-phase motor -Speed: 45.5 rpm -Power: 0.18 kW -Brake: 24 V -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 430/200/H140 mm -Weight: 15.1 kg

Gear motor, electric motor, electric gear motor -Speed: 44/88 rpm -Power: 0.22/0.3 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: -Number: 3x motors available -Price: per piece -Dimensions: 420/210/H220 mm -Weight: 26.3 kg

Gear motor, electric motor, electric gear motor -Speed: 115 rpm -Power: 0.2 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: -Price: per piece -Number: 2x available -Dimensions: 410/210/H195 mm -Weight: 19.5 kg

Gear motor, electric motor -Speed: 37/74 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 1x available -Dimensions: 345/200/H185 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 32 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 17 mm -Protection class: IP 54/65 -Number: 4x gear motors available -Price: per piece -Dimensions: 280/120/H170 mm -Weight: 7 kg