cutter k g used for sale

length: 1500 x 740 x 780 innen mm weight of the machine ca.: ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1500 x 740 x 780 innen mm weight of the machine ca.: ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.52 m, Overall length= 3.85 m, Overall width= 0.95 m, Net weight= 600 kg,

Width 72 cm Year of construction 1992 Pallet feeder with suction head 4 fold pockets in the parallel fold section 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Noise Insulation Hood Downstream knife shaft Shed display Delivery date: immediately from stock Price on request. We supply and install worldwide.

3-deck swashscreen in stainless steel design (polished surfaces) with a screening area of 2.60 m² per deck, drive 4.0 kW via V-belts, equipped with sight glasses for screening material observation. Including 3 screen inserts (various mesh sizes available); Ball knocking devices and balls are available for an extra charge.

SPECIFICATIONS: Feed length: 1970 mm Machinable width: 230 mm Machinable height: 110 mm Spindles: Ø 40 mm Number of Spindles: 4 Shaft drive Installed power: 16 kW Voltage: 380 V Spindle configuration: I bottom: 3.7 kW II right: 5.5 kW III left: 5.5 kW IV: top: 5.5 kW

BR-G17 18038 Testing Machine Manufacturer: Kirschenhofer Including Yaskawa ERAR-1000-06VX8-E10 robot Camera The Kirschenhofer testing machine type BR-G17 18038 is a specialized device that was developed for automated test processes in industry. It is particularly suitable for quality control of various products and components. Here are some of the key features and functions of this testing machine: Main features of the Kirschenhofer BR-G17 18038: Automation, versatile inspection methods, high speed, user-friendly user interface, robust design, data management.

KRONEN GEWA 2600V – Fully Refurbished Vegetable Washing Machine, We are offering a Kronen GEWA 2600V vegetable washing machine in excellent condition, fully refurbished and ready for immediate use., Refurbishment Details:, - Completely overhauled by professionals, - Fitted with a brand-new original pump, - All parts inspected, cleaned, and tested, - Machine runs smoothly and efficiently, Features:, - Efficient vegetable and salad washing system, - Gentle product handling through whirl washing principle, - Made of high-quality stainless steel, - Ideal for food processing companies, - Location: Emmeloord, Available Immediately, Invest in a high-quality machine with the reliability of KRONEN – now with the added value of a full refurbishment and a new pump!, For more information, photos, or to schedule a viewing, please contact us.

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 160mm Integrated lift for ergonomic operation Made of stainless steel Lowest noise level Easy cleaning Rated power: 36 kW Control voltage: 24/230 V Operating voltage: 400 V / 50 Hz Total nominal current: 63 A Fuse protection: 80 A

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1

General SKU251W327 LocationBarneveld MakeRKR Gebläse und Verdichter GmbH TypeK130-78/D300 No.903603/08 Year of construction2008 Pressure Pressure buildup0.5 Bar Main Features Capacity83.33 m3/Min Motor110 KW Pressure0.5 Bar Specified Features - Blower Blowercheck Capacity75,0-83,33 m³/min Motor110 kW, 400/690 volt, 1488 rpm With air filtercheck InletDia. 300 mm OutletDia. 250 mm MaterialMild steel Information Mounted on framecheck Total height1,95 m Weight1830 kg Floorspace1,25x3,15 m Extra SpecificationsThis machine was overhauled in 06-2019. : : The documentation of the work carried out during the overhaul is available. : : This machine is also supplied with a sound-proof enclosure. : : BlowersRKR Gebläse und verdichter GmbHBlowers > BlowersBrand > RKR Gebläse und verdichter GmbH What you can expect from Foeth: -- Machine is in working condition --  ...

General SKU300P658 LocationBarneveld MakeKEK Kemutec Products limited (UK) No.69477MOSO6682A Year of construction1990 Main Features MaterialMild steel/Stainless steel Motor2.2 KW Length600 mm Specified Features - Rotating sieve Rotating sievegrater Sieve sizesdia.250mm x600mm Screw sizesdia.140mm Inletdia.160mm Outletdia.300 With inspection hatch400x230mm Motor2,2 KW, 220/380 Volt Air purged glandscheck MaterialMild steel, Stainless steel Information Mounted on stainl. st. framecheck With switchgearcheck Floor space2,0x1,4 M Total height1,6 M Extra SpecificationsHousing in mildsteel Technical specs Extra informationScrew sizes: dia. 140 mmRotating sievesKek KemutecSieves > Rotating sievesBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...

General SKU212T471 LocationBarneveld MakeFima Maschinenbau GmbH TypeRC3 U180 KB6X 6 L 360 MB 280 No.1/20700737/20 Year of construction2007 Pressure Pressure buildup0.3 Bar Main Features Capacity66 m3/Min Motor55 KW Pressure0.3 Bar Specified Features - Blower Blowercheck Capacity4000 m³/h Motor55 kW InletDN400 Outlet140x140 mm MaterialStainless steel 1.4301 (304) Information Mounted on framecheck Total height1,33 m Weight1700 kg CEcheck Floorspace2,1x1,4 m ATEX compatiblecheckBlowersFima ProcessBlowers > BlowersBrand > Fima Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

max. wheel diameter: 600 mm gear width: 450 , 600 mm module: distance gear spindle / pinion head: 40 - 450 mm distance pinion spindel head / gear head: -160 - 600 mm axis adjustment +/-: 60 mm spindle turning speed - stepless: 1 - 2120 U/min spindle bore: 130 mm taper in main spindle: MK 60 total power requirement: 30 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 2,8 x 1,8 x 2,1 m Bevel gear testing machine, 2 flank testing! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU335X738 LocationBarneveld MakeNorbert Karasek Type160 Ltr. No.2626 Year of construction2002 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume120 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity160 l. (120 l.) Vessel sizesDia. 600x1250 mm Dished bottomcheck Top connectionscheck OutletDia. 75 mm, with valve With jacketcheck volume 12 l. Max. temperature145°C With propellor stirrercheck Motor± 0,25kW (type plate missing) Speed mixing shaft227 rpm Information Total height2,60 m Weight384 kg CEcheck Floorspace0,60x0,60 mStainless Steel ReactorsNorbert Karasek GmbH GloggnitzReactors > Stainless Steel ReactorsBrand > Norbert Karasek GmbH Gloggnitz  ...

Used bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In bakery condition- Compact bread roll line - Mini Rex Futura-S head machine - Can also be rotated to look only round and take off directly - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - With tools for emperors - Condition: good, everything checked - Machine is still being cleaned The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Originates from a European pharmaceutical leader in contract development and manufacturing (CDMO). Ready for Sale in Shropshire, England. Comes with: - Groninger DTE-600 rotary table - sorter with tray loader for glass bottles - Groninger ZSB-600 bottle sorter for PE bottles - Groninger DE-100 mobile bottle elevator - Groninger AAVK 300 automatic rotary bottle sterilising - cleaning unit - Monoblock filler and capper KFVG 201 with 3-head filling station This Groninger filling line was only occasionally used for short runs – therefore it is in outstanding condition with low hours. The line is primarily a used monoblock bottle filler and capper. Working Description Maximum output up to 60 BPM (depending on the container size and capping solution) with dose size up to 260 ml. The line is suitable for: • Fill ...

Key data: 4 , 180 mm, 120 mm

Used machine Workpiece width 180mm Workpiece height 120mm 4 spindles: 1) Horizontal bottom 180mm 3.7kW 2) Vertical right 120mm 4kW 3) Vertical left 120mm 4kW 4) Horizontal top 180mm 5.5kW Diameter of spindles 30mm

Evaporator GEA KUBA -Type: SGKE63-F82 -Cooling capacity: 34.6 kW at DT8, 27.6 kW at DT7 -Fin spinning: 10 mm -Electric defrost -Fans: 2 x 630 mm -Dimensions: 3010 x 850 x 1000 mm -Volume: 60 L -Quantity in stock: 3 -Reference number: CH 576 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Offer 25326 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 m - Rectangle 300 x 40 - or 240 x 80 mm - at 45° about 130 m - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 Cutting speeds - Drive 400 V / 1.26 / 2.5 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Feed + discharge roller conveyor with dimension stop 6000 mm

New, still in original packaging. 5 pieces in stock incl. accessories MK-Dock MK-D1A/D1B Monitors the condition of the print head. Snap Mount OP-35373 For easy mounting of the print head. MK-B1W fuse module For safe shutdown of the printer in the event of a power failure. QD unit MK-QD1 adapter with connector connectors for external devices such as sensors or encoders. in stock immediately available

Stock# UG6393 Used cutting mill by Rapid (SE) model G200-48 KURF. Mill is driven by 7.5 kW, 1470 rpm, 230-400 V, 50 Hz. Main feeding inlet has dimensions: 480 mm x 230 mm. Mill has also additional side feeding inlet for work on profiles. Rotor has bolted 12 knives, on side walls of milling chamber there are bolted two static knives. Bottom discharge via screen (10 mm) through blower, cyclone into the collection station.

Flatpile Feeder, 4 Pockets, 1 Knife, Delivery

Number of boring spindles: 2 St. Working width: 180 mm Working height: 120 mm Length of the planing table: 2100 mm Feed motor: 3,7 kW Feed speed: m/min. total power requirement: kw Dimensions (L/W/H): mm weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

General SKU295P584 MakeGerald Kainz Verfahrenstechnik GmbH (DE) TypeGTS-2000 No.18/027 Year of construction2018 LocationBarneveld Main Features MaterialMild steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener MaterialMild steel Tumbler screening machines Vibro sieveTumbler screening machine Sieve surface2.6 m2 Number of sieve decks:1 Sieve sizesdia.1880mm With covercheck Inletdia.300mm Outletdia.200mm Drive excentercheck Motor4,0 KW, 400/690 Volt Sieve perforation(no sieve) Information Mounted on mild steel framecheck Floor space2,0x2,0 M Total height1,8 M Weight1150 KG Extra SpecificationsThis sieve is unusedTumbler screening machinesKainzSieves > Tumbler screening machinesBrand > Kainz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

table width: 6000 mm table length: 2000 mm burner heads: 1 Equipment: - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cutting range 0.5 - 50 mm Piercing up to 30 mm Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Zimmer+Kreim Genius 700 Magic 3 was manufactured in 2009. It features a table with T-slots, dimensions of 575 x 500 mm, and a 24-position electrode changer. The machine can handle a maximum workpiece weight of 700 kg and offers a travel range of 400 x 350 x 350 mm. Consider the opportunity to buy this Zimmer+Kreim Genius 700 Magic 3 die-sinking EDM machine. Contact us for more information about this machine.

This Giardina RICHFRUITS / NEOMEC / KREMLIN Painting Line was manufactured in 2019. It features a comprehensive system for MDF or HDF boards, including dual circuit spray booths for clear and colored lacquers, designed for water-based UV lacquers. The line includes various elements like spray coating machines, drying tunnels with IR lamps, UV tunnels, and roller conveyors, all driven by KREMLIN pumps and spray guns. Contact us for more information about this machine.

Working width from to: mm Working height from to: . mm 0: . mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU413X1257 MakeGKM Siebtechnik LocationBarneveld CEcheck TypeKTS-1600/4 Main Features MaterialStainless steel Surface1.83 m2 Sizes diameter1580 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface1.83 m² Number of sieve decks:4 Sieve sizesø 1580 mm With covercheck Inletø 200/400 mm Outletø 200 mm Drive vibro motorcheck Motor4 kW, 400 V 1455 rpm Sieve perforation4,0/ 4,0/ 3,0/1,6 With ball cleaningcheck With extra sieve deckscheck Tumbler screening machines MaterialStainless steel 1.4301 (304) Information No.2877 Year of construction2017 Mounted on mild steel framecheck Floor space1,95x1,95 m Total height1,70 m Weight1400 kgTumbler screening machinesGkm SiebtechnikSieves > Tumbler screening machinesBrand > Gkm Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new  ...

General SKU279X364 MakeHSK Wärmetechnik Gottfried Kneifel GmbH LocationBarneveld CEcheck Pressure Working pressure19 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume250 Ltr. Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity250 l. Vessel sizesø 650 x 2300 mm Dished bottomcheck Max. temperature200 °C Information No.2267/1 Year of construction2012 Floorspace1,00 x 1,00 m Total height2,40 m Weight850 kgStainless Steel ReactorsNew arrivalsHSK Wärmetechnik Gottfried Kneifel GmbHReactors > Stainless Steel ReactorsNew arrivalsBrand > HSK Wärmetechnik Gottfried Kneifel GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...

General SKU335X739 MakeNorbert Karasek LocationBarneveld CEcheck TypeTank 1500 L Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1500 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity1500 Ltr. (max. 1678 Ltr.) Vessel sizesø 1200 x 1707 Dished bottomcheck Top connectionscheck Outletcheck 2x DN25 (with valve) With jacketcheck (101 Ltr.) Max. temperature145 °C Motor2.2kW, 230/400V, 1410rpm Speed mixing shaft86 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.2639 Year of construction2002 Mounted on legscheck Floorspace1,30 x 1,30 m Total height3,0 m Weight1394 kg Extra SpecificationsComes with 2 sieve CarriersStainless Steel ReactorsNorbert Karasek GmbH GloggnitzReactors > Stainless S ...

General SKU331W744 LocationBarneveld CEcheck MakeGWK Pressure Working pressure19 Bar Main Features Heating (medium)Electric Capacity46 KW Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Heating medium:R404A (cooling) Electric capacity64 kW With coolingcheck Capacity46 kW Temperature-25°C Tank capacity800 With pumpcheck Capacity16 m³/h Motor4 kW, 400/230 volt With temperature controllercheck Information TypeKCL100/46AZ Mach.No.20 7515 04-01 Year of construction2005 With switchcheck Floorspace3,80 x 1,75 m Total height2,35 m Weight2000 kgTemperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

Key data: 4 , 180 mm, 130 mm

Four-way planer Guilliet Type KXY Year of manufacture 1989 Planing width maximum 180 mm Planing height maximum 130 mm 4 planing shafts Knife length 186 mm and 136 mm Minimum planing 30 mm x 6 mm Dressing table length 2000 mm Feed speeds 6 and 12 m/min. Spindle diameter 30 mm Feed motor 0.55 kW Lower dressing shaft approx. 3.7 kW Right wave approx. 3.7 kW Left wave approx. 3.7 kW Above approx. 5.5 kW Height adjustment 0.18 kW Extraction connection diameter 160, 120 and 140 mm Including planer heads Dimensions 3200 mm x 1400 mm x height 1700 mm Weight 1200 kg The first picture shows identical machine in our warehouse

Gallus KMS 510 Unwind, E+L Web Guide, Teknek Web Cleaner, Arcotec Corona Treater, Infeed Tension Unit, 9 x Servo Flexo Units, Multi stream hot foil unit, Turning Tower Lamination Unit, GEW UV System, Chill Rolls, Waste matrix tower Rotary die cutting/embossing unit Register Control, Sensotec Web Inspection System AVT Video Control BST Chiller HYFRA Print cylinder 116 Anilox 29 Gallus FSM 510, 20" Flatbed Diecutters Web decurling unit two decurlers, one on the press and one on the die cutter Windowing/Stripping unit Belt delivery unit many accessories

Used Used Kegs Filler Alfred Gruber Anlagenbau: Year: 1991 Condition: Good Used Kegs Filler Alfred Gruber Anlagenbau: Model: 2/1 Year: 1991 Speed: 40 keg/h For beer Safety protections Code: T 208 More details: https://bottlingscout.com

Number of boring spindles: 4 St. Working width: 180 mm Working height: 120 mm Feed speed: ca. 10 m/min m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Gorman-Rupp S-Line VPA3-70-L is a diesel-powered, dry self-priming centrifugal pump (vacuum pump assisted), with a maximum capacity of 70 m³/h and a delivery head up to 20 mWc. This 3-inch pump is suitable for clean and wastewater, with a maximum solids passage of approximately 29 mm., , Key Specifications, Chassis Dimensions: Fully enclosed, sound-dampened., Fuel Tank: 100 liters, suitable for HVO fuel up to 100%., Engine: Kohler diesel engine, , The pump performs optimally when pumping clean or contaminated water, with a robust steel frame for continuous use., , Throughput capacity: 70 m3/h, Max dirt passage: 29 mm, Motor brand: Kohler, Max. head: 20 MWK, Max dirt passage: 3000 rpm, Weight: 600 kg, , = More information =, , Year of manufacture: 2021, Applicable material: Water, Empty weight: 600 kg, Connector size: 4 Inch, Technical condition: good, Visual appearance: good, Price ...

This Gorman-Rupp S-Line VPA3-70-L is a diesel-powered, dry self-priming centrifugal pump (vacuum pump assisted), with a maximum capacity of 70 m³/h and a delivery head up to 20 mWc. This 3-inch pump is suitable for clean and wastewater, with a maximum solids passage of approximately 29 mm., , Key Specifications, Chassis Dimensions: Fully enclosed, sound-dampened., Fuel Tank: 100 liters, suitable for HVO fuel up to 100%., Engine: Kohler diesel engine, , The pump performs optimally when pumping clean or contaminated water, with a robust steel frame for continuous use., , Throughput capacity: 70 m3/h, Max dirt passage: 29 mm, Motor brand: Kohler, Max. head: 20 MWK, Max dirt passage: 3000 rpm, Weight: 600 kg, , = More information =, , Year of manufacture: 2021, Applicable material: Water, Empty weight: 600 kg, Connector size: 4 Inch, Technical condition: good, Visual appearance: good, Price ...

Working width from to: 80-120 mm Working height from to: 30-80 mm : 1200-1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 0400 mm coil weight: 1,50 t material thickness: mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm range of expansion ca.: 460 - 530 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand board paper mill Mfc.: JUNG KWANG, NYM Machinery, Built: TBA Stopped: 2017 Type of Machine: Multi Cylinder Mold ( easy Former ) Grade of paper: Board paper , Liner board paper Basic Weight: 180 g/m2 ~ 550 g/m2 Slice Width: 3150 mm Operation Speed: 150 ~ 50 m/ Min. Production capacity : 130 ~ 100 T / day Current condition: installed on foundation

Two welding cells are available, each with two KUKA robots, one for workpiece handling and one for the welding process. 1) Welding process: resistance spot welding, robot: 2x KUKA KR 60-3, max. payload: 60kg, max. reach: 2033mm, repeatability: +/-0.06mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 4500h/8200h. 2) Welding process: resistance spot welding, robot: KUKA KR300 R2500, max. payload: 300kg, max. reach: 2496mm, repeatability: +/-0.6mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 2700h/6100h. Documentation available. An on-site inspection is possible. Individual sale possible.

Folding machine Type: K 54/4 KTL-F4 Manufacturer: GUK Year: 2004 Max. paper format: 540 x 800 mm Min. paper format: 150 x 190 mm Cross fold: 150 x 190 mm Triple fold: 210 x 300 mm Min.fold length: 45 mm Paper weight 40 – 300 g/m² Speed ​​30 – 180 m/min. Output: 40,000 pcs / hour (depends on paper format and quality) Stack feeder: yes Suction paper feeding: yes Unloader: yes Power supply: 400 V Mains frequency 50 Hz / 60 Hz Total weight of the device: 1600 kg The device is in excellent technical condition. New folding rollers and transport belts. Find more here - / Contact us at -

East Tyrolean combi mill Waldner GMSM 40 Grindstones 400 mm Output approx.: 25-30 kg fine flour/hour for the production of wholemeal flour and wholemeal meal only DGUV V3 tested by us Connection 400V, 2.2 kW, 16A-CEE plug Used machine

Cherry pit set for plums Pitting machines NewProduct descriptionManufacturer: Gustav BlickleType: MPB6 Steinloch-Dm 18 mmItem condition: NewCan be easily replaced without much effortDetails see pictures.

Used paddle mixer in acid-resistant design from Kramer Grebe type 249 with a capacity of 1500 liters.

Kroma Gutmaster 1200 for Sale – High Capacity Fish Gutting Machine, For sale: Kroma Gutmaster 1200, a high-performance industrial fish gutting machine, known in the industry as the Ferrari” of gutting systems due to its speed, precision, and reliability., Key Features:, - Capacity up to approx. 65 fish per minute (adjustable speed), - Advanced 16-step system automatically adjusts to fish size, - Suitable for multiple species (trout, mackerel, seabass, seabream, tilapia, etc.), - Precise and clean gutting with minimal manual finishing required, - User-friendly operation with automated positioning system, - Built in stainless steel for durability and hygiene, Specifications:, - Working range: approx. 0.18 – 1.2 kg fish, - Power supply: 3x400V, - Machine length: approx. 5.1 meters, - Single-operator operation, Condition:, Well-maintained and in good working condition. Can be seen runn ...