cutter k g used for sale

Kaltenbach, HCM 750, Cutting area: dia. 220mm, U/I beam : 400 x 150 , Feed rate: 0- 500mm/min , Drive motor: 5HP, 1700kg, sgt. Condition.

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 8,190 mm Number of fields per row of shelves: 05 pcs. The scope of delivery includes: 06x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 30x Shelves, used Material colour: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with the same. distributed load. 120x Shelf Racks, Used Suitable for smooth stands Material colour: sendz. ga ...

Capacity: 220 x 120 mm. Spindles: 5 Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kW Spindle diameter: 40 mm Motorised thickness adjustment, motor 1,5 kW digital display Infeed table1700 mm long Siko reading on the shaft positioning Protective hood with electrical contact Extension 5 x 140 mm

Useful sanding width: 1100 mm. Sanding belt dimensions: 1110 x 1900 mm. Number of sanding aggregates: 3 Roller steel grooved 15 kW, Roller 70? shore 18.5 kW, Roller 50? shore Aggregate 2 & 3 with shared motor Max. sanding thickness: 150 mm. Throughput speeds: 2,5 - 11 m/min Motor through-belt: 0,55 kW Height adjustment motorized, motor 0,26 kW Automatic thickness adjustment Input rollers length 700mm Output rollers 1600mm Touchscreen

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z - telephone modem - 1 sawing unit - 1 horizontal boring unit - distance horizontal drill above table (Z):max. 40 mm - fixed workpiece table - central lubrication - CE package - max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15? Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5? Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workp ...

Robot Maximum reach: 3195mm Rated payload: 180kg Maximum payload: 230kg Maximum supplementary load, rotating column / link arm / arm: 300kg / 130kg / 150kg Pose repeatability (ISO 9283): +-0,07mm Number of axes: 5 Mounting position: Floor Footprint: 754mm x 754mm Weight: 1017kg Protection rating (IEC 60529): IP65 Running hours: 1053h Vacuumsystem Dimensions: 1700mm x 900mm 350mm Construction of 56 SCHMALZ cups dia 50 and 70mm with pushrod for loosen plate FESTO components for compressed air/vacuum Each cup separately controlled by FESTO controller Communication via Profibus

Edgebander manufactured in 2010. This HOMAG KAL 210 Ambition 2264 is a used single-sided edge banding machine. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL 210 Ambition 2264 machine we have for sale. Contact us for further details.

A wet glue rotary labeling machine Krones for bottles is available. Bottle formats: 1l/0.75l. Including various format parts and variable label magazine. An on-site inspection is possible.

This 3-axis Kitamura KNC 150 NSA was manufactured in 2010. It features a twin spindle configuration with a maximum speed of 5,000 rpm and a spindle power of 7.5 kW. The machine includes an 8-station turret and a part catcher with a conveyor for efficient automation. If you are looking to get high-quality turning capabilities, consider the Kitamura KNC 150 NSA horizontal turning machine we have for sale. Contact us for further details.

Number of milling spindles: 4 St. fence: ja ja /nein workpiece: ja Stegherr KSF 2/4 - The modern, practical machine concept for efficient crossbar production. Years of expertise and a sophisticated, thousands-proven machine guarantee precision at an optimal price-performance ratio. Particular emphasis is placed on the machines ease of use and flexibility. KSF 2/4 upgrade: Milling units A1, A2, A3 as with KSF 2. + Milling unit A4, machining of the counterpart without turning, view side absolutely tear-out-free. Digital fence (moving carriage, reliable and quick readability to 1/10 mm). foot switch With tools in the machine as shown in the pictures plus 2 additional profile cutters, see pictures. Further accessories are shown in the pictures. Compressed air pressure: p = 6 bar The following work was carried out on the machine: - Maintenance unit replaced - Pneumatic hoses replaced - Plexig ...

table length: 840 mm table width: 600 mm ampere: 60-120 A total power requirement: 15-23 kVA weight of the machine ca.: 2,75 t dimensions of the machine ca.: 2760 x 1110 x 1840 m With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth):  ...

This 3-axis KUNZMANN BA1400 was manufactured in 2017. It features a powerful 28 kW motor and a Heidenhain TNC 640 control unit. The machine has a table size of 1400 x 710 mm and can handle a maximum workpiece weight of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KUNZMANN BA1400 vertical machining centre we have for sale. Contact us for further details.

x-travel: 1000 mm y-travel: 450 mm z-travel: 450 mm table surface area: 1370 x 400 mm number of T-slots: 5 Stck. spindle turning speed range: 32 - 1500 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 50 total power requirement: 7,0 kW weight of the machine ca.: 3,1 t dimensions: 2,1 x 1,7 x 1,9 m Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydraulic tool cutting - Coolant system - Central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal Band Saw manufactured in 1999. This KASTO HBA 520/620 U features a working area of approximately 520 x 620 mm and includes a roller conveyor for efficient material handling. With a total length of around 350 cm, this machine is designed for precision cutting in metal applications. If you are looking to get high-quality cutting capabilities, consider the KASTO HBA 520/620 U machine we have for sale. Contact us for further details.

Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details.

Year: 2021 Axles: 6 Max Reach: 2701mm Rated load: 210 kg Max load: ~270 kg Weight: 1107 kg Control: KRC4 Remote control: KUKA SmartPad Model: KUKA KR 210 R2700-2 FLR (QUANTEC-2 Series) Serial Number: 1077133

This 3-axis Flow Kent Mach 2 C was manufactured in 2014. It features a working area of 3000 x 2000 mm and operates with a maximum pressure of 60,000 PSI. The machine is equipped with a powerful 75 kW pump and utilizes abrasive waterjet cutting technology. If you are looking to get high-quality cutting capabilities, consider the Flow Kent Mach 2 C CNC waterjet cutting system we have for sale. Contact us for further details.

Year of manufacture: 2020 Serial Number: 10023754 Load capacity: 360 kg Reach: 2830 mm Control: KRC4

This 4-axis WEIRATHER KS1300/4 was manufactured in 2004. It features a maximum milling length of 1300 mm and a milling diameter of 300 mm, making it suitable for various applications such as tool handles and furniture components. The machine operates with a Siemens control system and has a cutter shaft speed of 5300 rpm. If you are looking to get high-quality milling capabilities, consider the WEIRATHER KS1300/4 wood mill we have for sale. Contact us for further details.

KUKA KR60 L30-3 industrial robot Year of manufacture: 2017 Load capacity: 30 kg Reach: 2429 mm Control: KUKA KRC4 2 pcs available.

This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details.

KUKA grinding cell with KR 180 robot Set Year of manufacture: 2011 Reach: 2498 mm Controls: Kuka KRC4 Load capacity: 180 kg We have 4 goals Remote control

This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details.

Year of manufacture: 2012 Control: KUKA KRC4 Lifting capacity: 240kg Reach: 2896mm

Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It includes a hydraulic mechanical 2 platen clamping system and a robust motor current of 261 A. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1300-12000 MC machine we have for sale. Contact us for further details.

This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details.

Model: KR 210 R2700 prime Serial Number: 642212 Year of manufacture: 2015 Payload: 210 kg Reach: 2696 mm Weight: 1111 kg

This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details.

Flexographic printing machine (central cylinder) Type 16 S Material width 1100 mm, Print width 1050 mm, Repeat 320 -800 mm Speed 360 m/ min. Diameter of unwinder and rewinder (turnstile) 1000 mm

This 6-axis KUKA KR 120 R3100-2 Quantec-2 was manufactured in 2021. It features a maximum reach of 3100 mm and a rated payload of 120 kg, making it suitable for various applications. With its robust design and IP65 protection class, this robot arm is ideal for demanding environments. If you are looking to get high-quality automation capabilities, consider the KUKA KR 120 R3100-2 Quantec-2 robot arm we have for sale. Contact us for further details.

Country of manufacture: Germany Year of manufacture: 2015 Reach: 1801 mm Repeatability: +/- 0.5mm Number of axles: 6 Load capacity: 16 kg Control: KPC4 Weight: 245 kg

This 6-axis KUKA KR 16 was manufactured in 2013. It features a maximum reach of approximately 1610 mm and a payload capacity of around 16 kg. The robot arm is designed for versatility, allowing for floor or ceiling mounting. If you are looking to get high-quality automation capabilities, consider the KUKA KR 16 robot arm we have for sale. Contact us for further details.

Model: KR 270 R2700 Ultra Version: C4 FLR (Floor) Year of manufacture: 2017 Load capacity: 270 kg Reach: 2696 mm Weight: 1129 kg Controller: KUKA KR C4 Serial Number: 663438

This 6-axis KUKA KR 10 R900-2 robot arm was manufactured in 2021. It includes a KRC4 compact control unit and comes with software version KSS 8.6. With 11 units available, this machine offers versatile automation capabilities. If you are looking to get high-quality robotic solutions, consider the KUKA KR 10 R900-2 robot arm we have for sale. Contact us for further details.

Year of manufacture: 2018 Weight: 52 kg Load capacity: 6 kg Reach: 901 mm Positioning: ±0.03mm Number of axles: 6 Control: KUKA KRC4

This 6-axis KUKA KR 6 R900 CR was manufactured in 2021. It features a KRC4 compact control cabinet and operates with KSS 8.6 software. This versatile robot arm is equipped with a controller, remote, and cables. If you are looking to get high-quality automation capabilities, consider the KUKA KR 6 R900 CR robot arm we have for sale. Contact us for further details.

The used palletizer from KHS INNOPAL Lord 1BUN1 is a specialized palletizer – a renowned manufacturer of machines for the beverage, food and packaging industry from KHS. The INNOPAL Lord 1BUN1 series model is known for its high efficiency (up to 420 layers/hour), which gives 75 thousand bottles per hour of nominal capacity, in the offered unit the capacity was set at the level of 45-50 thousand / hour. Due to the configuration of other elements of the line, the said unit is characterized by high flexibility and modular design, as it has an additional automatic head for palletizing crates and cartons, so it is ideal for palletizing crates, cartons, trays, returnable packaging or bottles. The year of production of the polarizer is 1999, installed in 2000, the polarizer in 2016 underwent modernization (replacement of guides with new ones), under the supervision of KHS service. In additio ...

This 6-axis KUKA KR 10 R900-2 robot arm was manufactured in 2022. It includes a KRC4 compact control unit and operates with KSS 8.6 software. If you are looking to get high-quality automation capabilities, consider the KUKA KR 10 R900-2 robot arm we have for sale. Contact us for further details.

Hygienic robot, suitable for food and medical industry. Pick and Place Robot Model: KUKA 3 D1200 HM/SEL Number of available: 24 robots Year: 2021 Load capacity: 3 kg Reach: 1200 mm Control: KR C5 KSP

This 6-axis KUKA KR 10 R900-2 was manufactured in 2020. It includes a KRC4 compact control unit, software version KSS 8.6, and comes with a robot, controller, remote, and cables. If you are looking to get high-quality automation capabilities, consider the KUKA KR 10 R900-2 robot arm we have for sale. Contact us for further details.

Year of construction: 2012 Load capacity: 6 kg Reach: 901 mm

Year of manufacture: 2001 Control: (V)KRC2 Load capacity: 15kg Reach: 3085 mm

This 6-axis KUKA KR 6 R900 CR was manufactured in 2020. It features a KRC4 compact control unit and comes with KSS 8.6 software, along with the robot, controller, remote, and cables. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 6 R900 CR robot arm we have for sale. Contact us for further details.