cutter k g used for sale

(1994) 1250t Wolff Knuckle-Joint Press High-Precision Knuckle-Joint Press for Massive Forming Loads This Wolff press is a heavy-duty powerhouse, delivering a massive 12,500 kN of force specifically rated at 30° before Bottom Dead Center. Engineered for longevity and extreme precision, it features a 32-ton frame, permanent oil pressure lubrication, and electronic force monitoring to ensure consistent performance during high-capacity cold-forming operations. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Wolff Model: KHP 1250 Year of Manufacture: 1994 Nominal Force (30° before BDC): 1250t Stroke Rate (Continuous): 25 strokes/min Ram Stroke: 90 mm Ram Adjustment: 70 mm Shut Height (min/max): 490 mm / 560 mm Max. Distance (Table to Ram): 625 mm Clearance in Ram Frame: 680 mm Table Surface Area (W x D): 660 mm x 660 mm Ram Surface Area ( ...

Unused Servo Control for a Tetra Pak Cap 30 Flex. Tetra Pak article number: 90605-9390. Official Tetra Pak description: Servo-Antrieb, K5500 EtherNet/IP 528VAC., Type of Machine: Servo drive, CAT NO: 2198-H025-ERS, Instructions: 2198-IN001x-xx-x, MAC Address: 40:41:01:E0:74:10, Main input: 195-264/324-528 Vac 8.3 Arms 3 Ph 50/60 Hz, Control input: 24 Vdc 2.8A, Motor output: 0-460 Vrms 3 Ph 0-590 Hz 8 Arms Continuous, 20 Arms Peak

Lifting kneader Kemper F 100 S Dough machine Kemper Model: F 100 S 2 courses simple, robust technology Machine mobile only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine

Spiral mixer Kemper SPL 75 proven kneading machine for your doughs! 2 timers Spiral mixer with 2 gears Stainless Steel Boiler and Spiral Connection: 400 V robust mechanics! Used machine

Spiral mixer Kemper SPL 75 Manual control 2 gears, 2 clocks Stainless steel boiler and spiral Connection 400V, 32A-CEE plug Used machine

Lifting kneader Kemper F 30 SL 2 gears, 1 timer Robust technology only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled with warranty

Spiral mixer Kemper SP 75 L sophisticated technology ... already proven many times over! Manual control 2 gears, 2 clocks Robust technology Dough machine is mobile only with us with DGUV V3 tested Connection 400V, 32A-CEE plug Used machine

Kemper F 150 ASL overhauled Lifting mixer Description A completely overhauled Kemper F 150 ASL working kneader for max. 240 kg of dough. The machine is equipped with 2 to 7 stainless steel kettles for a maximum of 240 kg of dough each. The lifting kneader has been completely overhauled and repainted, the electrics, the ball bearing and the gears have been renewed. With 2 speeds With 2 timers Automatic (new) With stainless steel lifting arm Per kettle max. 150 kg flour, or 240 kg dough With flour dust Cover Kettle with handle All ball bearings renewed Complete electronics new V-belt new Machine completely new

Lifting mixer Kemper F 125 A completely overhauled Lifting mixer Kemper F 125 A with 2 stainless steel kettles each max. 200 kg dough. The machine has been completely overhauled and repainted. The electrics, ball bearing and gears have all been renewed. Description Manufacturer: Emil Kemper GmbH Type: F 125 A Condition: completely overhauled with 2 speeds with 2 timers Automatic with stainless steel lifting arm per kettle max. 125kg flour or 200kg dough With flour dust Cover Kettle with handle

Used extendable kneading machine Kemper SPA 100 &, 2 tank cars Product description Manufacturer: Kemper Type: SPA 100 For 100 kg flour, 160 kg dough Stainless steel kettle and spiral With 2 clocks With 2 extendable tank cars 2 x timers automatic 2 x Speeds slow and fast With flour dust cover On request we also have other boilers in stock Details see pictures.

Stainless steel boiler for spiral mixer Kemper ST 100 A Product description Manufacturer: Emil Kemper GmbH Type: ST 100 A Condition: used, baker's condition The kettle is integrated on a trolley The trolley is easy to drive and rotate The kettle can be rotated on the trolley in all directions Material Carriage: metal Material Kettle: stainless steel for 100 kg flour, 160 kg dough Inner à ̃ of the kettle: 90 cm, 45 cm deep Outer shell of the kettle: 94 cm, 79 cm high Material thickness: 2 cm See pictures for details.

â Product description âœ" Manufacturer: Emil Kemper GmbH âœ" Type: F 125 ASL âœ" Material: kettle and kneading arm made of stainless steel âœ" Condition: used, baker's condition - please clean thoroughly before use âœ" max. capacity of 125 kg flour and max. 200 kg dough âœ" mobile on rollers âœ" with flour dust cover âœ" External dimensions: W.: approx. 120 cm, D.: approx. 110 cm, H.: 110 cm See pictures for details.

Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order Number : 1263.920 C Order Number : 1600.905 C Order Number : 1600.900 C Order Number : 1120.920 C Order Number : 1120.919 C Order Number : 1100.935 C Order Number : 1100.940 C Order Number : 1383.919 C Order Number : 1270.900 C Order Number : Special Rollers  See picture for details

Kalmeijer 1383.901 B KGM Pastry Forming Roller Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1383.901 B Details see picture PLUS POINTS Heating of the figure roller, do not sprinkle flour and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space.  Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer 1383.910 B KGM Â Pastry forming rollerManufacturer : KalmeijerType : KGM 250NEWBordering number : 1383.910 BDetailment number : 1383.910 BDetailment of the figure roller, do not sprinkle flour and thus better baking styleChange of the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer Pastry Forming Roller KGM Â 1380.912 B Manufacturer : Kalmeijer Type : KGM 250 NEW Order Number : 1380.912 B Details see picture PLUS POINTS Heating of the figure roller, no flour sprinkling and thus better baking Changing the figure roller without tools within a minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Here we sell a flake squeezer from KoMo FlicFloc which is very nice, practical and very easy. New with packagingDetails see picture Flake crusher FlicFloc not only crush oats, but of course also pretty much any other grain. Whether wheat, rye, spelt, green spelt, etc. But that's not all, seeds and kernels can also be wonderfully processed into flakes (e.g. flaxseed, hemp seeds, sesame, poppy seeds and many others). In other words, you can simply make your muesli fresh in the morning

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: KEB, frequency converter Drive Controller Combivert -Type: 12.56.200-A349 92280163/053049 -Power: 5.5 kVA -Dimension: 355/245/H220 mm -Weight: 6.7 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: KEB, frequency converter Drive Controller Combivert -Type: F4 -Item no.: 05.F4.SOC-1220/ -Power: 1.6kVA -Number: 3x frequency converter available -Price per piece -Dimension: 225/90/H115 mm -Weight: 1.4 kg/pc.

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller -Manufacturer: KEB, Frequency converter Drive Controller Combivert -Type: F5 -Item No.: 10.F5.AD-3AHA -Power: 4.0 kVA -Dimensions: 320/90/H220 mm -Weight: 3.7 kg

Knurling machine, window construction profile machine, insulation joining machine -Manufacturer: Aluro, BTM knurling machine with accessories -Type: Knurling Machine -Function: a single machine, solely for knurling the strand cavity -Drive: 2x Lenze 0.55 kW -Rollers: Ø 125 mm -Travel distance X/Z: 120/155 mm -Accessories: see photos -Dimensions: 1180/700/H1480 mm -Weight: 297 kg

Spiral mixer Kemper SPL 75 Manual control 2 gears, 2 clocks Stainless steel boiler and spiral Connection 400V, 32A-CEE plug Used machine

Lifting kneader Kemper F 100 SE Stainless steel kettle and kneading arm 2 gears, 1 time timer Robust technology Connection 400V, 16A-CEE plug Used machine

Spiral mixer Kemper SPL 75 Manual control 2 gears, 2 clocks Flour dust hood Very robust technology Connection 400V, 32A-CEE plug Used machine

Lifting kneader KEMPER, type: F 30 S -in good condition- - For a maximum of 50 kg of dough or 30 kg of flour - Kettle and kneading arm made of stainless steel - 2 speeds - Protective grille - New connection cable - Very smooth running - Condition: good, ready for immediate use Visits and test runs are possible by arrangement. Further information is available on request.

Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible.

A Raschel warp knitting machine Karl Mayer is available. Working width: 130inch, gauge: E32, yarn feed: EBA-1, guide bar element: C-32-28/P2, guide needle element: Spec-38-45 G105, latch needle element: L-32-93H-0, knock-over comb element: S-32-93H-0, speed: 1800-2000, yarn monitoring: Laser 4080. Including computer. Documentation available. An on-site inspection is possible.

Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A 

Max. forming force: 80t, connected load: 3.5kW, current type: 3 phases, frequency: 50Hz, operating voltage: 380V, control voltage: 24V, rated current of the machine: 10A, rated current of the supply fuse fast-blow: 25A, slow-blow: 15A, weight: 1.79t. With documentation, without accessories or spare parts. Regularly maintained, machine has a defect, the speed adjustment no longer functions fully. An on-site inspection is possible.

Stock Laminating machine, Type: 134R5-1500 P, Year 2001, Max.Size: 1420x1620 mm, Min.Size: 500 x 500 mm, Printers sheet:, Paper from about 180 g/m², Carton from about 400 g/m², Carrier sheet:, corrugated cardboard up to about 7.0 mm thickness, Cardboard/Chipboard from 0.6 mm

Tank car WP UC 80 A Werner & Pfleiderer Tank Cars Suitable for UC 80 Used device overhauled SAB tested with warranty + spare parts service

Refrigerant R134a Filling weight 0.54 kg Operating pressure HD 18 bar Operating pressure 16 bar Connection 203 V, 1~, 50 Hz Rated current 3.5 A Ambient temperature min 5°C / max 43°C The refrigeration dryer is defective, the sale is in the condition as it is, excl. Warranty, ex warehouse Neeunkirchen-Vörden

SCREW AIR COMPRESSOR model KAESER SK 19 with Vertical tank Lt. 750 second hand machine in Excellent working condition motor power Hp 15 ( Kw 11 ) working pressure bar 10 volt. 380/50

Capacity, ton 1000 Course stroke, mm 170 Number of strokes per minute 32 Shut height, mm 470 Table size, mm 800 x 800 Weight, kg 26000 The presses are in working condition. Complete

Manufacturer: Berief Model: Kippko 1600 Year: 1996 Condition: Used Serial Number: 6975 Stock Number: 3376 Capacity: 1600 litres Heating steam, max. 10 bar Power: 3 x 400V, 50Hz Dimensions: 4000 x 2000 x 2300 mm Double jacket Tiltable drum Incl. Berief L25 lifter for 200L eurobins

Spiral mixer KEMPER, type: ST 30 -in bakery condition- - for 30 kg flour or 48 kg dough - Technical condition: good - Everything checked and cleaned - El. Connection: 380 V, 50 Hz, 3Ph, 16 A Visits and test runs are possible by arrangement.

Krones Contiform S 12 with 12 cavities Capacity: approx. 18.000 bottles/hour on 2,0 litre bottles Year of manufacturing: 2006 Operating hours: only approx. 38.000 hours Including Gardner Denver Belliss & Morcom compressor WH29H3N with dryer and air receiver Bottle neck finish: 1881 The machine is currently still in production and will run until August 2026 Dismantling and removal must take place at the beginning of September 2026 Location: United Kingdom

Linomat LN2 washer with filler, 2 active cleaning heads, Fully automatic, fully electronic KEG interior cleaning and filling machine, for different KEG sizes 15-50 L KEG, for containers 20 ltr. - Performance 35 -40 containers / h The Keganlage runs on Schlankkeg- basket fitting. Build in 1992, very good condition and fully functional, tested by Seegr?ber GmbH

The blow moulding stations are new and have never been used.

Capacity: 32 boxes / minute Closure only on top of the box, Max. carton dimensions: H400 x W 280 mm equipped with connection for remote control

Double jacket, Tiltable drum, Incl. Berief L25 lifter for 200L eurobins, Capacity: 1600 litres, Heating: steam, max. 10 bar, Power: 3 x 400V, 50Hz, Dimensions: 4000 x 2000 x 2300 mm

Capacity: 2500 kg / h, Heating: steam, Cooking time: 120 min

Overview  This Krones Sleevematic sleeve applicator from 2017 is in excellent condition with only 1,563 running hours. The machine is capable of applying sleeves at a speed of up to 30,000 bottles per hour (500 BPM). It is equipped with a 2-head sleeve applicator system and a steam-operated shrink tunnel (Shrinkmat). Bottle handling change parts for 300 ml, 500 ml, and 1500 ml PET bottles are included. Technical Data Capacity: 30,000 bottles/hour (500 bottles/min) Sleeve Applicators: 2-head sleeve feed system Shrink Tunnel: Steam-operated (Shrinkmat) Bottle Formats: 300 ml / 500 ml / 1,500 ml Condition: Very good, low operating hours Operating Hours: 1,563 Scope of Delivery Krones Sleevematic sleeve applicator 2-head sleeve feed system Shrink tunnel (steam) Bottle format parts for 300/500/1500ml PET bottles

Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW

Size: 310 x 430 mm Equipments: Counter 22 Mio Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

Used Blow Molding Machine KOSME KSB 4L up to 6800 bph The KSB 4L blow molding machine is built specifically for producing PET bottles. Notably, it offers a robust, compact solution for high-performance production. Its design is both innovative and technically straightforward. As a result, it ensures optimal efficiency and a high quality-to-price ratio. With four cavities, it effectively produces up to 6,800 bottles per hour. In addition, it accommodates formats from 0.1 to 2.5 liters. The solid, well-organized structure of the KSB 4L provides operators with flexibility and reduced maintenance needs. Furthermore, the machine has completed 22,000 hours of operation. It also includes two original molds, one for 0.5 liters and one for 1 liter. Heating system and preform feed in the Blow Molding Machine KOSME KSB 4L To achieve its heating capabilities, the KSB 4L’s heating system uses fo ...

Used Kosme Filling Monoblock Completely Refurbished in 2016 Introduction to the Kosme Monoblock The Kosme filler, a filling monoblock with a 24/24/6 configuration for carbonated and still water, stands out for its reliability and high-performance capabilities. Additionally, this machine, refurbished completely in 2016 and unused since then, ensures optimal working condition. Performance and Operational Capacity of the Used filling monoblock Kosme completely refurbished in 2016 This monoblock’s operational capacity is remarkable; it produces 9000 pieces per hour for 330 ml bottles, demonstrating its versatility in handling various bottle sizes, ranging from 50 mm to 105 mm in diameter and from 150 mm to 350 mm in height. Technical Features of the Monoblock Among its key features, the presence of an aluminum cap and an effective rinsing system are noteworthy. Furthermore, the monoblo ...

Technical Specifications & Performance Data The Kosme KOSMAC 6T-S2-E1 is a robust rotary labeling solution ideal for beverage production and industrial packaging environments. This second hand labeling machine from 1991 is maintained in excellent condition and ready for operation, offering reliable front-and-back application for multiple bottle formats on a compact footprint that integrates smoothly within a used bottling line. Manufacturer: Kosme Model: KOSMAC 6T-S2-E1 (Kosmac) Year: 1991 Category: Labeling Machine (rotary, wet-glue) Labeling method: Paper/Glue and PP/Glue Label position: Front and Back Number of plates: 6 Number of stations: 1 (configured for dual-label application) Rotation direction: Clockwise Formats processed: 10 (format-dependent output) Adjustments: Manual head adjustment; manual glue film regulation Included accessories: 6 label magazines and 11 glue drums for m ...