cutter k g used for sale

APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and  ...

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Delem DA 66S stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 10.000 kg dimensions: 4200x2200x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview  This filler and capper for products such as hand sanitizers, liquids, lotions and creams was built in 2019 by the Chinese manufacturer Terry. The machine is in its original, unused condition and is still in its original packaging. The machine has never been put into operation and is immediately available.   Technical details  Filling volume range: 20-300 ml  Bottle shape adaptation range: ø25-70 mm (For diameters of 10-25 mm, an inverse shape can be used if required. Products with a diameter over ø70 mm can use customized moulds for automated production)  Filling accuracy: 20-100 ml, ±0.5 g; 101-300 ml, ±0.5 %  Production speeds:   Products with 300 ml content ≥15 bottles/minute,   Products with 200 ml content ≥20 bottles/minute,   Products with 100 ml content ≥35 bottles/minute,   Products containing 50 ml ≥40 bottles/minute. (All figures are based o ...

Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machin ...

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - / Contact us at -

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw compressor Atlas Copco GA11VSDFF Inverter and dryer integrated 11 kW 12.75 bar 1.84 m3/min Year of Make: 2011 Hours: 50,496

Clamping plate with prism, centering table, centering device, plate field, welding table, welding table, plate boring machine -Ideal for centering shafts -Width: 658 mm -Table length: 2396 mm -Height: 115 mm -Working height: 920 mm -Prism length: 2900 mm -Prism width: 140 mm -Dimensions: 2920/730/H1200 mm -Weight: 540 kg

Used 5-stage evaporation station by Gea Wiegand. Year of construction 1986. Capacity 10000 L/h. Reconditioned in 2008 with exchangers + computer control by B&P. Also added in the same year was an aroma column built by B&P and designed by Dipl Ing K.H. Volp.

weight max. in kg: 5000 kg fork length: 1500 mm stroke: 5500 mm total power requirement: ? kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: ? m Forklift 5 to 5200 Working Hours Fork Lenght 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 17800 € : 341.76 € : 80 to : 510 mm : 40x14 mm : 40 1/min : 9 kW : 1700 mm : 1300 mm : 2050 mm : 1715 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 120 mm turning length: 640 mm control: Fanuc 32iT total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0375 Brand: GREDA Model: CFL 4 - CE Standard Contouring, milling, and sanding machine for contouring and milling on two opposing sides of a piece of wood, such as chair, armchair, sofa, gun handles, and various - CE Standard Technical data: N° 2 milling units N° 2 milling and sanding units N° 4 motors 7,5 Hp each N° 4 rotation reversals Max workable length 2500 mm Max workable height 180 mm Min/max workable width 20/320 mm Milling unit shaft diameter 35 mm Max milling tools dimensions diameter 160 mm - height 180 mm Carriage feed 30 mt/min Carriage return 30 mt/min Automatic table slowdown with stops Sanding belt length 2500 mm Automatic positioner N° 6 adjustable pressers Total installed power 36 Hp Compressed air 6 bar Overall dimensions mm 6700 x 2200 x 1800 h Weight kg 3600

Overview  This capsule machine was manufactured by CIRIO GERMANO in 2014. The machine has 6 heads and is designed for processing thermal shrink capsules. Technical details  Manufacturer: CIRIO GERMANO Model: MONOBLOCCO 6 TERMICHE Year of manufacture: 2014 Serial number: 14-018 Number of heads: 6 Capsule type: PVC shrink capsules Function: Automatic capsule feeding & thermal shrinking

Fully functional. Free loading, please call if you have any questions

Allen Bradley Guard Master 450L-E4FL1800 - safety barrier Brand: Allen Bradley Guardmaster Product type: Light curtain Series: 450L-E Beam Resolution: 14mm Component Type: Transceiver Protection Type: Type 4 Standards/Approvals: TUV, IEC Protection height: 1.8m Maximum protective width: 9m Maximum supply voltage: 24V Minimum Scanning Distance: 0.5m Maximum Scanning Distance: 9m Height: 1.8m Length: 30mm Width: 30 mm Maximum response time: 20ms Connector Type: Screw

Closure conveyor, Fabr. Gassner, 1 basement for crown caps with magnetic vertical conveyor, as well as 1 basement for screw caps with inclined belt stud conveyor; with sealing distributor diverter for crown corkers and screwers, 15 m conveyor belt, emptying pipe, control cabinet, dismantled and stored

Groninger plastic bottle filling & capping line comprising ZSB 2000 empty bottle unscrambler, DFV 10005Q in-line filling machine with 10 filling stations with cross-feed function, dosing range of 5 to 1000 ml, bottle height from 30 to 250 mm, transport cup dimensions (pucks) 108 x 80 mm and KVK 106 rotary capping machine with 6 capping stations with ZSK 1500 cap sorter and a lift-off conveyor for the transport cups (pucks), capacity up to 150 bottles per minute

Labelling Machine GERNEP Labetta 7500 bph Fully automatic cold glue labelling machine for glass bottles and jars from the first owner, machine made by German Gernep in 2013 and having only 9512 operating hours as a labeller. This labeller has three cold glue label magazines for pre-cut paper labels (neck, front and back, now preserved in storage and a part of delivery scope). It covers all traditional equipment requirements of containers made from glass and PET. The combination of well-tried technologies such as stainless steel glue roller, rubberised and adjustable glue palettes, divided glue scraper knife with glue-saving fine adjustment of the glue thickness, overlay gearbox for exact label positioning. Labeller has been maintained well and last full overhaul (EUR 19’500) was made in the end of 2019. All air driven glue pumps are changed to electric drive pumps and it has stainl ...

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

A conventional center lathe is available. An on-site inspection is possible.

An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible.

Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power.

Two complete blister packaging lines from the pharmaceutical industry are available. 1.1) Automatic case packer IMA CP 28 BA, year of manufacture: 2000, min. carton dimensions X/Y/Z: 220mm/120mm/120mm, max. carton dimensions X/Y/Z: 600mm/400mm/350mm, output: 8cartons/min, machine dimensions X/Y/Z: approx. 4900mm/1900mm/2650mm, weight: approx. 1500kg. 1.2) Bundle wrapping machine IMA BFB MS 300 A with stretch banding, year of manufacture: 2005, bundle length range: 20mm-360mm, bundle width range: 55mm-220mm, bundle height range: 55mm-220mm, output: approx. 40bundles/min, max. film roll diameter: 300mm, machine dimensions X/Y/Z: approx. 2900mm/1300mm/1950mm, weight: approx. 1500kg. 1.3) Mini robot. Overall line dimensions X/Y/Z: 10750mm/2350mm/2250mm, transport weight 1/2: approx. 4700kg/5000kg, total weight: approx. 10000kg. Without shrink tunnel. 2.1) Blister packaging line IMA Giant 1 B ...

Capacity: 300l, working position 0-40kg: 22° from horizontal, working position 40-260kg: tilted 45°. Main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible.

Manufacturer: Motan Model: Gravicolor 100 Type: GC 100-P-Z Year of Manufacture: 2008 Type of Machine : Dosage Unit Condition: Used Electrical Data - Supply voltage: 1N/PE 230 V, 50 Hz - Power consumption: 0.26 kW - Rated current: 2.5 A - Control voltage: 24 V DC - Delayed fuse: 10 A Find more here - / Contact us at -

A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible.

A complete double agitator system 2 x 3000l made of high-quality V2A including propeller agitators made of V2A, continuously variable speed-controlled. Inspection by appointment possible.

Gildemeister Twin 65 Y - RG2Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mmTurning length : 650 mm____________Description:In General:Year of construction:2007Control:Siemens 840 DBar capacity:65 mmTurning diameter:350 mmTurning length:650 mmMain spindle:Technology:Motor spindleSpeed:5,000 rpmPower max.:35 kWTorque max.:370 NmC-axis:0.001Bar capacity:65 mmChuck:Hainbuch Spanntop size 65Clamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:26 kWTorque:290 NmC-axis:0.001Chuck:Hainbuch Spanntop size 65Clamping cylinder:Partial hollow clamping cylinderZ-axis:670 mmX-axis:175 mmTool carrier i (X/Y/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 rpm, 11 kW, 28 NmX-axis:300Y-axis:80 mm ( +/- 40 mm)Z-axis:650 mmTool carrier II (X/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 ...

Size: 265 mm Impression: 2 Mio. Equipments: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

Size: 450 x 460 mm Equipments: Hoist duplex tires Lifting height 225 cm Weight 18700 KG Diesel 6 Cylinder Deutz Motor Stacker length 360 cm width 200 cm installation height 240 cm Fork length 250 cm width 30 cm

• Sorting insert diam. 650 mm made of stainless steel • Frequency control unit • Adjusted for cap diam. 28 x h 12 mm • Plastic housing • Height adjustable • Electr. connection 230V/50Hz

• Set up for bottles • Throughfeed with indexing stars for object diam. 24 and 29 mm • Without conveyor belt • Weighing range 2 - 500 g • Capacity max. 200 weighings/min • e=d 0.1 g • Passage from left to right • Paper printer • Bad ejection by pneumatic pusher • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Calibrated until 2014 • Height adjustable • Connection 115/230 V | 50/60 Hz

Continuous checkweigher: • Specially set up for aerosol cans/bottles Ø 23 mm • Belt run from right to left • Load cell SW-D-FS • Passage with cycle star for object Ø 23 mm • Weighing range 0.1 - 500 g • Capacity max. 100 weighings/min • e=d 0.05 g • Paper printer • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Without infeed conveyor up to cycle star and without outfeed conveyor between cycle star and infeed Camera box Coding station: • Receptacle for printhead Domino inkjet printer (without printhead and inkjet printer) • Camera control object bottom • bad ejection camera/weight with blowing nozzles • Connection 115/230V/50/60Hz

turning diameter: 600 mm turning length: 1250 mm control: Siemens 840D radial face slide travel: 320 mm turning speed range: 5-3.000 U/min Number of tools: 8 St. steady: coolant device with chip conveyor: total power requirement: 42 kva weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,6x2,15x1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 635 mm control: Heidenhain Eltropilot greates pass round over bed: 570 mm travel -x axis: 220 mm travel -z axis: 635 mm main spindle bore: 79 mm drive of main spindle: 21 kW max. torque on the spindle: 240 Nm main spindle speeds:: 25-5.000 turning speed range - C-axis: 100 U/min workpiece system 12-station turret head: feed power in the axis x + z: 3,5 / 7 N rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min coolant device with chip conveyor: total power requirement: 44 kva weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aircooled chiller CLIMAVENETA FX G04 A 0751 112 kW Cooling capacity: 112 kW / 31.85 tons (12/7 — 35°C) Year of manufacture: 2018 Options: KIP Link Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer CSC7973-70Y-40P (screw) Type of refrigerant: R1234ze(e) Number of fans: 2 pcs. (EC-fans) Dimensions: 2.3x1.6x2.5 m. Weight: 1800 kg. Working hours: 0 h. Condition: New

electric motor, three-phase motor -Manufacturer: ATB Nordenham, explosion-proof electric motor -Type: CD 90L2-8 -Power: 0.55 kW -Speed: 690 rpm -Shaft: Ø 14 x 30 mm -Design: B14 -Protection class: IP55 -Terminal box: EAR 80 -Number: 2x motors available -Price: per piece -Dimensions: 345/176/H270 mm -Weight: 32.1 kg/pc.

Gildemeister G20, 6-Spindel-Portal-Drehautomat, GILDEMEISTER 20, Maschine komplett überholt, Elektrik - neu, PLC – neu, Mechanik - generalüberholt -, Geometrieprotokoll – wie Neumaschine –, CE – Konformitätserklärung, einschl. elektrische Standardausrüstung, Grundausstattung der Maschine:, 1 Tippbetrieb zum Einrichten, 1 automatische Zentralschmiereinrichtung, 1 Kühlmitteleinrichtung einschl. Pumpe und Antrieb, Behältervolumen ca. 650 L, 1 Werkzeugspindelführungsblock, 1 Antriebsgruppe für rotierende Werkzeugspindeln einschl. Gewindeschneidgetriebe für jede Werkzeugspindelposition wahlweise:, - a) Gegenläufig zum Schnellbohren, - b) Synchronlaufend, - c) Zum Gewindeschneiden bzw. Reiben, 2 Planschlitten mit unabhängigen Planvorschub, 4 Kreuzschlitten mit unabhängigem Plan- und, (Längsvorschub als Option) + 1 Maschinen-, leuchte, 1 Paar Wechselräder für Spindeldreh ...

Cross slide in pos. 1, 2, 4, 5, Drive for cross slide in pos. 2, Pickup spindle, hydraulic in pos. 6, Mechanical double slide in pos. 6, Pneumatic workpiece unloading device, High pressure coolant system with chiller, Swarf coneveyor, worm type with magnetic filter unit, Set of tool holders, Set of cams, Number of spindles: 6, Spindle speed [rpm]: 5.000, Auto bar loader: Iemca PRA 52 F

Manufacturer: Gebhardt Model: CONVER 146 Year of Manufacture: 2018 Type of Machine : Freight Elevator Find more here - / Contact us at -

A gravimetric dosing and mixing unit for plastic granulate Motan is available. Dosing stations: 4, throughput capacity: approx. 150kg/h, reference bulk weight: 0.6kg/dm³, container volume: 4x18l. Machine dimensions X/Y/Z: approx. 600mm/650mm/920mm, weight: approx. 100kg. An inspection on site is possible.