cutter k g used for sale

Engine Brand: MTU, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-new/435, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Engine Brand: MTU, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-new/440, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Engine Brand: MTU, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-new/218, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Engine Brand: MTU, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-new/215, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Engine Brand: MTU, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-new/260, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Engine Brand: MTU, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 174 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-engine-new /227, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Engine Brand: MTU, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-new/288, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Engine Brand: MTU, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-new/426, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Engine Brand: DOOSAN, Condition: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 230 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/doosan-gv158ti-used/731, , = More information =, , Type: Engine, Type of fuel: LPG, Type number: GV158TI; Transport weight [kg]: 1255

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 45 Kw, Bore: 84 mm, Stroke: 100 mm, Engine Capacity: 2216 cc, Qty Cylinders: 4 Qty, Nominal Rpm @ Nominal Power: 2800 Rpm, Engine Fuel Type: diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: No Flywheel , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c2-2-g7l-306-9 226-used/706, , = More information =, , Type: Engine, Type number: G7L-3069226; Transport weight [kg]: 215

Godwin HL80M high-pressure pump, , This dry self-priming high-pressure diesel engine pump is ready to tackle all the heavy work without complaining. With its robust 75 kW Deutz diesel engine (at 2200 rpm), it delivers impressive performance: a maximum capacity of 95 m³/hour and a delivery head of up to 85 meters. Whether its pressure testing pipes, irrigation, or a rinsing job after a fun weekend in the mud, this HL80M can handle it all., , Key specs:, , Type: HL80M, Drive: Deutz diesel engine, Fuel tank: 250 liters (you can keep pumping for a while before it gets thirsty), Consumption: ± 20 liters/hour at full load, Pressure connection: 4 flange, Suction connection: 4 V-piece quick coupling, Weight: 1,800 kg (solid, because quality weighs something), Dimensions: 2150 x 1130 x 2060 mm, Pump housing: cast iron – extremely strong, Impeller: cast steel – for when things get serious, M ...

This diesel-powered GEHO ZD 300 double-acting piston pump in a soundproofed casing has the great advantage, compared to its big brothers, of its light weight and compactness. The great efficiency of the ZD 300 ensures an enormous capacity., Feel free to call or email us for the possibilities., , Throughput capacity: 35 m3/h, Motor brand: Hatz, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 895 kg, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Empty weight: 895 kg, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you ...

turning diameter over bed: 600 mm turning diameter over slide rest: 400 mm turning length: 2000 mm hollow: 82 mm turning diameter: 600 mm turning dia. in gap: 800 mm length of gap: 400 mm turning speeds: 2000 U/min 3-jaw chuck: 250 mm steady: 210 mm with live steady: 200 mm Holder Multifix: coolant: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was cr ...

1 solenoid valve, Fabr. GEMÜ, EPDM, Type 225, 230 V 2 solenoid valves Fabr. GEMÜ, EPDM, Type 225, 24 Volt 1 solenoid valve Fabr. GEMÜ, FPM, Type 205, 24 V, new

Technical data: Material width: min. 130 mm, max. 270 mm Material width: max. 244 mm Print repeat length: min. 101.6 mm, max. 254 mm Machine components: • Corona treatment • 5 × offset printing units • 1 × flexo printing unit • Flat hot foil stamping unit • Flat die-cutting unit

Grass hardware drill/dowel machine Tecmator RP Specifications: • Ideal for carpenters, interior fitters and small series manufacturers • Robust and practical design • Easy and problem-free change of the spindle head • Certified, type-tested design • Pneumatic two-hand control for fast, safe work • 6-spindle drill head for hinge, mounting plates and connecting fitting holes • Useful optional accessories offer extended processing options for furniture parts • Voltage 230 V Year of Make: 2022 Price: We ask for your binding offer. Available from: immediately Terms of delivery: ex location – EXW Berlin Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

Rolling mill, used Type : W 150 AP Manufacturer : Dr. Collin GmbH Drive : 14 KW Roller diameter : 150 mm Roller width : 400 mm;

Tenoning spindle: 1 St. Number of milling agregates: 0 St. Spindle diameter: 40 mm Small window production consisting of: W. -------------------------------------------------- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings -------------------------------------------------- Technical manufacturers description: - Haberkorn FZS1 slotting machine with automatic feed, -stepless height adjustment D 40 mm Cutting-to-length saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal pneumatic positioning, manually adjustable  ...

YEAR: 2015 CONDITION: GOOD CONFIGURATION: MANUAL LOADING AUTOMATIC SEPARATION PNEUMATIC PRESSURE DELIVERY TECHNICAL SPECIFICATIONS: MAX. SPEED - 15 M/MIN SHEET LOADING - MANUAL SEPARATION OF LAMINATED SHEETS - AUTOMATIC PAPER THICKNESS - 115 - 350 G/M2 MAIN ROLLER PRESSURE - PNEUMATIC COMPRESSOR - STANDARD, IN THE MACHINE FRAME MIN. SHEET SIZE (W X D) - 20 X 30 CM MAX. SHEET SIZE (W X D) - 38 X 58 CM MAX OUTPUT - 1200 W3/H TEMPERATURE CONTROL - 80 - 140°C ROLLER HEATING TIME - 5 MIN IMMEDIATELY AVAILABLE FORM OUR WAREHOUSE IN 67269 GERMANY

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 274 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-6r1600-g20f-new/220, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6R1600 G20F; Transport weight [kg]: 1300

Key data: 700 mm

4-jaw face plate - Ø 700 mm - Material: Cast iron - Damage to a threaded head, function given - Diameter: 700 mm - Through-hole: 125 mm - Body width: 110 mm - Total width: 155 mm

Inv. Num. : 8820 Type: MINI-88 Y Producer: POLY GIM Created: 2007 Parameters: Control System: MITSUBISHI Max. turning diameter: 25 mm Maximum length of travel in the X-axis: 165 mm Maximum length of travel in the Y-axis: 148 mm Maximum feed in the Z-axis: 150 mm Maximum spindle speed: 6000 1/min Spindle bore: 34 mm Max. rod diameter: 26 mm Length: 1200 mm Width: 1000 mm Height: 1500 mm Weight: 1058 kg Equipment: Conveyor Y-axis Bar Feeder FEDEK STM-326

plate width: 2000 mm sheet thickness - max.: 10 mm sheet thickness - min.: 3 mm number of straightening: 13 Rollers straightening roll diameter: 145 mm straightening feed: 16 m/min bale length: 2330 mm distance b/n rollers centers: 150 mm diameter of bottom rollers: 290 mm main drive motor: 30 kW weight: 32 t - number of bottom rollers: 21/24 - Number of supports (top/bottom): 3 /3 - speedof adjustm. of traverse: 0,71 mm / sec - way oftraverse: -18 mm to +42 mm - max. swivellower traverse: 8 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3080 mm, 6 mm

max. sheet thickness steel (450N/mm²) 6.5 mm max. cutting width 3080 mm Machine weight 5600 kg Very good, ready-to-use condition

Densitometer GretagMacbeth DensiEye 700, serial number: 0486.

G&J C85, Clean Out Unit

Used bread roll line LIPPELT, type: G3000-CSC -In very good bakery condition- For Kaiser and sliced rolls - Head machine SVP - 3 rows - Digital control - Pre-proofer Z-B049 - with side discharge - Stamp shapes, such as HEART stamps, are available separately from the manufacturer -El. Connection: 3x 400 V, 50 Hz, 10 A, 2.2 kW - Capacity: 2,500 - 3,000 pcs./h The system is in a very good and well-maintained used condition and is immediately ready for use. Inspection and test run are possible by arrangement.

pressure: 185 t chamfer lenght: 4000 mm distance between columns: 4100 mm Control: Cybelec VisiTouch 24MX stroke: 300 mm dayligth: 500 mm : 175 mm/s bending speed: 0-12 mm/s total power requirement: 22 kW weight of the machine ca.: 15.500 kg dimensions: 4970 x 3260 x 2090 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 4000 mm distance between columns: 4100 mm Control: Cybelec VisiTouch 24MX stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 18 kW weight of the machine ca.: 13.000 kg dimensions: 5080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: t plate thickness: 5 mm sheet width: 40 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamber volume: 4 und 5 liter useable volume: -- liter friction: - motor drive power: 2x 37,5 kW Condition: used or reconditioned Specification: 2x laboratory internal mixer – used Consisting of two mixing chambers: Type: GK4N - Capacity: approx. 4 litres - Rotor geometry: tangential type - Ram: pneumatic - 1 independent DC motor: 37.5 kW Type: GK5E - Capacity: approx. 5 litres - Rotor geometry: Interlocking rotors type - Ram: Hydraulic - 1 independent DC motor: 37.5 kW The system can be sold in its current condition. Currently not functional due to severed cables, or refurbished with new electrical parts, with CE certification and warranty. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

7400 mm Galler Omega Pallet Rack Manufacturer: Galler Type: Omega Height: 7500 mm Depth: 1100 mm Length: 7400 mm Shelf width: 3600 mm Shelf load: 3000 kg Field load: 12000 kg Fields: 2 Levels: 3 incl. floor parking space Pallet spaces: 24 Scope of delivery: 08 x Omega PA Traverse 3600 x 120 x 65 mm White incl. locking pins 03 x Omega Stand 7500 x 1100 x 100 mm galvanized More items - new and used - can be found in our shop! International shipping costs on request!

16500 mm Galler Omega Pallet Rack Manufacturer: Galler Type: Omega Height: 7500 mm Depth: 1100 mm Length: 16500 mm Shelf width: 3300 mm Shelf load: 3000 kg Field load: 12000 kg Fields: 5 Levels: 3 incl. floor parking space Pallet spaces: 60 Scope of delivery: 20 x Omega PA truss 3300 x 120 x 70 mm yellow incl. safety pins 700,- € 06 x Omega Stand 7500 x 1100 x 100 mm galvanized 1050,- € More items - new and used - can be found in our shop! International shipping costs on request!

Belt conveyor 1.34m with drive Length: 134cm Width: 50cm Height: 90cm Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Used Roll Press FORTUNA, Machine Size 4 -In Bakery Condition- - 30 hollows per plate - Weight range: 40 - 110g - Condition: very good, - Video on request A viewing is of course possible by arrangement.

ICMA SAN GIORGIO TWIN SCREW EXTRUDER CO-ROTATING, used for elastomers TPE TPU SBS,.., Extruder with co-rotating segmented screws 2 x 140 mm 36 L/D, Screws speed 178 rpm, Reinforced gearbox, Siemens 430 kW drive, degassing pump, semi-automatic hydraulic screenchanger, hydraulic pack, Dry pelletizing unit, Electric panel overhauled in 2015, added touch control, Constructed in 1997, CE compliance declaration, electric drawings.

turning diameter: --- mm turning length: --- mm control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New Goedhart LLK.p 22x6x3900x50/50x(2x8)+ Freon evaporator. Please notice that we can deliver this evaporator with 4 suitable fans that have an diameter of 780 mm & the capacity is based on an airflow of 40.000 m³/h. Specifications: Brand: Goedhart Type: LLK.p 22x6x3900x50/50x(2x8) Capacity: 63,5 kW (Based on an airflow of 40.000 m³/h) Refrigerant: Freon Number of fans: 4 Fin spacing: 8 Sizes: 4450x1550x1410 mm (LxWxH) Surface: 338 m² Volume: 101 dm³ Weight: 590 kg

TOS Galanta SUIL 40A – Lead and Pull Spindle Lathe For sale is a well-preserved and mechanically overhauled 2009 TOS Galanta SUIL 40A lead and pull spindle lathe, built in 1998. Specifications Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1620 kg Main drive: 5.5 kW Spindle speed (max.): 3150 rpm Spindle bore: 50.2 mm Center spacing: 1000 mm Center height: 200 mm Turning diameter over bed: 400 mm Condition: ready for use (used) Accessories Three-jaw chuck Tailstock Lunette Coolant Setup Interchangeable Wheel Set Operating instructions (German) The machine is fully functional. Viewing possible by appointment

New Kelvion / Goedhart VCe-i 635010 Freon evaporator with hot gas defrost built in 2020. Complete with 3 Ziehl-Abegg fans - 50 Hz - 0,72 kW - 1240 RPM - diameter 500 mm and a total airflow of 25.437 m³/h. Specifications: Brand: Goedhart Type: VCe-635010 Capacity: 36,6 kW Refrigerant: Freon Number of fans: 3 Fin space in mm: 10 mm Defrosting: Hot gas Air flow: 25.437 m³/h Sizes: 3560x1000x1010 mm (LxWxH) Year of built: 2020 Volume: 43 dm³ Weight: 340 kg

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mm tooth width max.: 58 mm spindle speeds (infinitely variable): 6000 U/min work piece spindle speed: 1200 U/min diameter of tools max.: 230 mm diameter of tools min: 69,85 mm x-axis: 325 mm y-axis: 350 mm z-axis: 470 mm b-axis: + 90,1 / - 1 ° work piece table - Ø: 212,71 mm Control: SIN 840 D SIEMENS total power requirement: 75 kW weight of the machine ca.: 10.000 Kg dimensions of the machine ca.: 6,10 x 4,40 x 3,30 m Internal probe Renishaw LP2 (axis X2,Y2) Hoffmann coolant filter system HSF 100SE/K (built in 2008) Tank capacity 2500L VT oil mist filter system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 16 mm distance between columns: 3050 mm : 15-1000 mm cutting angle adjustment: ja ° cutting gap adjustment: ja mm connected load: 30 kW weight of the machine ca.: 14,.5 t dimensions of the machine ca.: 4,0 x 260 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Omron Guard Lock Safety Door Switch D4NL - 2DFA - BS

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 70 /min COUNTER RAM   nominal force: 40 to   stroke: 14 mm V-RING   nominal force: 50 to   stroke: 10 mm TOOL DIMENSIONS   lower table (left-right): 480 mm   lower table (front-back): 520 mm   upper table (left-right): 480 mm   upper table (front-back): 520 mm   shut height max.: 314 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 999.9 mm   sheet length min: 2000 mm   pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into individua ...

Aircooled chiller RC GROUP PYXIS U 128 P2 S U3 123 KW Cooling capacity: 123 kW / 34.97 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Dimensions: 2.96x1.2x2 m. Weight: 1012 kg. Condition: Good

Cutting speed: 80m/min, saw blade dimensions X/Y/Z: 2760mm/27mm/0.9mm, miter range: 60°/45°, working height: 950mm, cutting range X/Y: 280mm/150mm, max. cutting diameter: 230mm. Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 350kg. Documentation available. An on site inspection is possible.

A rotary labelling machine for bottles from the manufacturer GERNEP GmbH is offered. Front and back labels, wet glue/cold glue units, self-adhesive units. Inspection by arrangement possible.

Software: OptiCon Pilot 5.1, with documentation, camera and lighting module, 3x repair work place software for defect visualisation and 4GB RAM computer, was last maintained in 2013.

Transnorm belt curve conveyor right GKF 90°-810-600 IR600 RA1804 Technical data: Type designation: Belt curve conveyor TS 1500-100 Frame width (NB): 810 mm belt width (GuB): 600 mm height (BH): 330 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: KT58 Year of construction: 1990 Optionally available: Supports Side guide one and both sides Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1990 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 810 Belt width in mm: 600 angle: 90° Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 scope of delivery: without supports and side guid ...

PAPER CUP FORMING MACHINE SINGLE WALL 12 oz (90mm TOP DIAMETER) IN AN EXCELLENT AND WORKING CONDITION VERY LITTLE HOURS OF OPERATION .