136,459 used machines on RESALE, but how to find them? Machine Search
Router depth 80cm, equipped with counter weight 1500kg. Auction-ID: A1-47393-112
Engine: 224 cc 4-stroke petrol engine Cutting width: 53 cm Maximum range: Controllable up to 600 meters away Fuel tank: 1 litre Consumption: Approximately 0.7 liters per hour Maximum Inclination: Up to 45 degrees Maximum speed: 3 km/h Cutting height: Adjustable between 3 and 12 cm Control system: Remote control via wireless transmitter, with a range of up to 600 meters Design: Robust and suitable for slopes up to 45 degrees Ease of use: Easy operation and adjustability for optimal mowing results Safety: Incl. emergency braking and obstacle detection for safe use on steep slopes Remote lawn care, without physical presence Auction-ID: A1-40324-112
Cuts fillets into portions by weight, The Marel IPM3 X300 is a portion cutter for fish, chicken and meat fillets. Each piece is scanned on the belt, and the machine works out where to cut to get portions of a fixed weight or length. You get more out of every fillet with less trim left over., The machine was built in 2005 and has a perforated belt 280 mm wide. Settings are made on the control panel with a colour screen., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/marel-ipm3-x300-portion-cutter/, Type: Portion cutter (fixed weight or fixed length), Products: Fish, chicken and meat fillets, Belt: Perforated, 280 mm wide, Scanner: Cameras with laser line, Controls: Control panel with colour screen, Electrical: 3 x 380–480 V, Construction: Stainless steel
Used Urschel cutting machine, built entirely in stainless steel, This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine., The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/urschel-cutting-machine/, Type: Cutting machine, Infeed: Hopper, Drive: Electric motor with belt drive, Controls: Own control box on the machine, Construction: Stainless steel, on castors
Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50865-334
Mobile oxy-fuel welding and cutting machine with two gas cylinders, pressure reducers, hose package and case with various torches and accessories. Auction-ID: A7-50868-110
Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50865-335
Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094 Auction-ID: A1-50865-350
Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095 Auction-ID: A1-50865-348
Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093 Auction-ID: A1-50865-352
Date of Manufacture: 08-2021 Serial No.: M150140000 Dimensions: 856 x 648 x 551 mm (34 x 25.5 x 22 inches) Empty Weight: 50 kg (110 lbs) Loaded Water Mass: 180 kg (400 lbs) Maximum Flow Rate: 1.9 L/min (0.5 gal/min) at 27.5 MPa (4,000 psi) Maximum Pressure: 27.5 MPa (4,000 psi) Maximum Water Temperature: 54 °C Maximum inlet pressure: 0.86 MPa (125 psi) Main unit: 100-240 VAC, 50/60 Hz, 2.0 A, 100 W, IP 32 Total power (unit + pump): 1.8 kW at 110 V / 2.3 kW at 220 V Auction-ID: A1-50714-4206
Equipped with rated input voltage: 1P AC380V ±15% 50/60Hz; Rated input power: 29A; Rated input power: 19KVA; Open circuit voltage: 280V; Output current setting: 30-120A; Rated output voltage: 128V; Cyclic duty cycle: 60%; Efficiency: 80%; Insulation class: F; Protection class: IP21; Non-contact welding (arc formation): No; Maximum cutting thickness 45mm; Auction-ID: A1-50051-28
Working parameters: Manual industrial machine for sharpening and grinding cutting tool profiles. Equipment included: vertical grinding wheel with protective housing, adjustable tool holder, work table, manual movement and adjustment via handwheels, coolant/cooling device and metal protective screen. Notes: Robust construction on metal frame. Auction-ID: A1-50714-4312
CONTROLS PLC SIEMENS SIMATIC MULTI PANEL FEEDSTOCK TUBE external diameter min.: 8 mm external diameter max.: 90 mm Round tube min. 8 mm max. 90 mm Square tube min. 8x8 mm max. 80x80 mm Rectangular tube min. 15x10 mm max. 60x85 mm
Offered for sale is a programmable guillotine cutter with electronic control system. Technical specifications: Cutting length of the original material: 75-1000mm, cutting width of the original material: 180-1000mm, processable paper grammage: 40-173g/m², minimum sheet length: 40mm, minimum sheet width: 40mm, maximum stack height: 80mm. Control system: SEYPA-TV with electronic control panel and program selection buttons. Equipped with large work table, side tables, material stop, foot control and rear material support area. Inspection possible by arrangement.
Offered for sale is a paper sheeter with multiple unwind stands. Technical specifications: Cut length: 360-1800mm, sheet width: up to 1500mm, roll width: 360-1800mm, processable paper grammage: 40-173g/m², maximum number of parent rolls: 6, maximum roll diameter: 1000mm, maximum roll weight: 430kg plus 70kg for the winding shaft, core inner diameter: 70mm. Equipped with multiple unwind stands, two slitting knives, cross-cutting unit, web guide rollers, handwheels for mechanical adjustment, sheet transport system and delivery table. Inspection possible by arrangement.
- Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-73
Eurocutter TM 28 TKT - three knife trimmer year 2009 max. size uncut 440 x 310 mm max. size cut 420 x 300 mm min. cut size 80 x 80 mm max. stack height 100 mm Min. Stack Height 5 mm max. 28 cycles/min. compressed air 12 l/min. set of knives compressed air 12 l/min automatic format setting Weight 2,850 kg good condition in production
- Consisting of approximately: - 10 x complete sets with HSK F63 tool holder, collet and cutter. - 6 x complete sets with ISO 30 tool holder, collet and cutter. - 3 x HSK F63 strain clamping tool holder. - 10 x cylindrical handle cutting tools. - 12 x tapered handle cutting tools. - 10 x tweezers of various sizes. - Blades. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-27
- Disc diameter 380 mm. - Table dimensions 1650 x 1030 mm. - Maximum cutting height approx. 120 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-45
- Consisting of approximately: - 13 x complete sets with ISO 30 tool holder, collet and cutting tool. - 34 x ISO 30 tool holder with collet. - 16 x tweezers. - 3 x clamping nuts for tool holders. - 2 x drilling aggregates with 4 heads, positionable 0°-360°. - 1 x milling aggregate with fixed inclination. - 13 x cutting tools. - 1 x Hydraulic Pump - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-23
- Consisting of approximately: - 18 x complete sets with ISO 30 tool holder, collet and cutting tool. - 2 x ISO 30 tool holder with collet. - 8 x tweezers. - 14 x cutting tools. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-13
- Total installed power 5.30 KW. - Length of the piece to be cut from 310 mm to 4100 mm. - One head is fixed and the other mobile with automatic positioning commanded by programmable electronic control. - The 2 heads are tiltable. - Disc diameter 450 mm. - 2.20 KW motor in each head. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-601
: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 0.2 - 4 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our fa ...
Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...
Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite
turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm turning length: 500 mm spindle bore: 36 mm turning speeds: 30 - 3550 U/min spindle nose: Kurzkegel Gr.5 DIN 55022 tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,511,5 m On customer order - Private machine - Accessories: 3-jaw chuck 4-jaw chuck Collet chuck with lever clamping Multifix A + various holders Operating tool Various turning tools Original documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
1 € 
