cut used for sale

This 3-axis AMADA LC2415 Alpha 5 was manufactured in 2017. It features a maximum processing area of 5,040 × 1,550 mm and a powerful 3,500 W CO₂ laser, capable of cutting mild steel and stainless steel up to 10 mm thick. The machine has a maximum simultaneous feed rate of 114 m/min and can handle workpieces weighing up to 330 kg. If you are looking to get high-quality cutting capabilities, consider the AMADA LC2415 Alpha 5 CO₂ laser cutting machine. Contact us for further details.

1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equ ...

turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 500 mm center height over bed: 140 mm centre distance: 500 mm bed width: 205 mm spindle bore: 40 mm turning speed range - stepless: 30 - 4.000 U/min 3-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 4,0 kW taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 85 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1,40 x 0,95 x 1,55 m - Serial-No.: 154 - SIEMENS 3-axis digital display - MULTIFIX quick-change tool holder - rotating centering tip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 50210 € : 863.32 € : 1 : 45200 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine accordin ...

Granulator, heavy-duty version Manufacturer: NEUE HERBOLD, D-74889 Sinsheim Drive: 75 kW Hopper: Conveyor belt hopper Working width: 1000 mm Rotor diameter: 600 mm Year of manufacture 2015, overhauled with - New rotor - New funnel - New base frame Application examples: Crushing of massive lumps, start-up chunks, profiles, beverage costs, boxes, vegetable crates,...

TRUMPF TruLaser Tube 7000 laser cutting machine equipped with a 2.7 kW TRUMPF TruFlow 2700 laser source. Year of manufacture: 2011. Serial number: A0441A0073. Designed for cutting round, square, rectangular tubes and structural profiles. Maximum tube diameter: 254 mm. Maximum feed length: 6,500 mm. Maximum discharge length: 6,500 mm. Minimum tube section: 12 mm. Equipped with automatic material loading and unloading system. TRUMPF TruFlow 2700 2.7 kW laser source. Power supply: 3 × 400 V / 50 Hz. Operating hours (Power ON): approximately 49,700 h. Laser ON hours: approximately 48,030 h. Includes control console, electrical cabinet and automatic tube handling system. High productivity machine, especially suitable for machining tubes and metal profiles with high precision. Auction-ID: A7-49809-7

table width: 3000 mm table length: 1500 mm burner heads: 1 Control: CNC feed: 20.000 mm/min total power requirement: 15 kVA dimensions of the machine ca.: 4,5 x 2,5 m Heavy machine bed with precision guides for quiet movement machine A ball bearing cross carriage for height adjustment with 400mm vertical Hub Thermal separation of the drive and cutting areas ensures the highest precision Automatic height finding and torch height control during cutting Torch holder with collision protection and automatic shutdown in the event of a collision Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, o ...

table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 1500 kg traversing speed: 200 m/min total power requirement: 55 kW dimensions of the machine ca.: 10050 x 4920 x 2200 mm CUTTING CAPACITY: STRUCTURAL STEEL 40 mm STAINLESS STEEL 40 mm ALUMINUM 40 mm BRASS 16 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter over face slide: 200 mm Spindle bore: 32 mm Circumferential diameter over bed slide: 315 mm Tip width: 600 mm Turning length: 560 mm Quill stroke: 140 mm Total weight: 1,750 kg Digital display Heidenhain Collet System E163

Omga Radial 600P3S Manufacturer: OMGA Type: Radial 600P3S M.Nr: 163864 Max. saw height: 90mm Max. saw length: 505mm Saw diameter: ø300mm Saw spindle: Ø 30mm Motor: 3 kW Speed: 3000 tpm Dust extraction: 80mm Weight: 190 kG Condition: functional

OMGA T50 350 Manufacturer: OMGA Type: T50 350 Year: 1993 M. Nr.: 222415 Max. saw height: 110 mm Max. saw length: 170 mm Saw diameter: ø350mm Saw spindle: ø30mm Motor: 2,2 kW Dust extraction: 80mm Incl. Ventilator Condition: Functionel tested

OMGA T50 350 Manufacturer: OMGA Type: T50 350 Year: 1993 M. Nr.: 222420 Max. saw height: 110 mm Max. saw length: 170 mm Saw diameter: ø350mm Saw spindle: ø30mm Motor: 2,2 kW Dust extraction: 80mm Incl. Ventilator Condition: Functionel tested

Manufacturer: Harwi Type: 625-U Year: 1998 Swivelling: 0-45° Tilting: 0-45° Cutting heigth: 135mm Cutting length: 625mm High adjustment: 50mm Saw: Ø 400mm Saw arbor: Ø 30mm Motor: 3 kW Toerental: 2800 tpm Dust extraction: 2x 100mm

Graule ZS170N 3D – with NC controlled tilting & swivelling Manufacturer: Graule – with Tigerstop NC-control Type: ZS170N – with Tigerdrive control (tilting & swivelling) M-Nr.: 2014/78/27 Year: 2014 Graule ZS170N Motor: 3 kW Saw: ø420 mm As zaagblad: ø40 mm Cutting height: 170mm Swivelling: 45° – 90° – 25° Tilting: 0° – 45° Stroke: 450 mm – 90° 310 mm – 45 ° Saw: ø420 40 48 WZ Neg. (used) Machine stand: Inclusive

DeWalt 1600S Manufacturer: Dewalt Type: 1600S M. Nr: nn Max. Saw heigth: 100 mm Max. Saw length: 610 mm Saw: ø350 mm Saw spindle: Ø30 mm Motor: 3 kW Toerental: 2.650 rpm Dust extraction: ø100 mm Weight: 115 KG

Maggi 640 Junior Manufacturer: Maggi Type: 640 Year: 1994 Thickness: 125mm Stroke/sawlength: 450mm arial: 90mm Saw blade-outside diameter: ø400mm Saw blade-inner diameter: ø30mm Motor: 3 kW RPM: 2800 tpm Dust extraction: 2x 100mm

DeWalt 1600 Manufacturer: Dewalt Type: 1600 Max. Saw heigth: 100 mm Max. Saw length: 610 mm Saw: ø350 mm Saw spindle: Ø30 mm Motor: 3 kW Toerental: 2.650 rpm Dust extraction: ø100 mm Weight: 115 KG

Maggi 640 Junior Manufacturer: Maggi Type: 640 Year: 199. Cutting height: 125mm Stroke: 450mm Saw eleavation: 90mm Saw diameter: ø400mm Arbor: ø30mm Motor: 3 kW RPM: 2800 rpm Dust extraction: 2x 100mm

Graule Model ZS 135/N (tilting and swivelling) Motor: 2 or 3 KW 400 Volts Cutting height: 135 mm – 90°, 92 mm – 45°tilted Stroke: 460 mm – 90° and 320 mm – 45° Saw: 350 mm Swivelling: 45° – 90° – 25° Titling: 45° – 90°

OMGA T55 300: 3 pcs. for sale Manufacturer: OMGA Type: T55 300 Year: 1990-10 M. Nr.: 199899 Max. saw height: 75mm Max. saw length: 135mm Saw diameter: ø300mm Diameter zaagblad as: ø30mm Motor: 1,2 kW Speed: 3000 tpm Dust extraction: 80 Condition: Functionel tested

DeWalt 722KN -XS Manufacturer: DeWalt Type: 722KN-XS M.Nr: 00180 Cutting height: 90mm Stroke: 510mm Saw diameter: ø300mm Arbor: Ø 30mm Motor: 3 KW RPM: 2650 rpm Dust extraction: 2x 100mm Weight: 115 kG

Letter Press Tiegel - DIE Cutter Heidelberg OHT Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1969 - Serial-No. 171075 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm

Guillotine Schneider Senator Senator 115E Schneidmaschine - Guillotine Schneider Senator Senator 115E Year 1999 - Serial-No. M-41-11-08/20-09 Schnittbreite max. 1150mm / Cutting width max. 1150mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives

Schneidmaschine / Gullotine Wohlenberg 92 MCS-2 TV Baujahr / Year 1989 - Serial-No. 3277-029 Schnittbreite / Cutting width max. 920mm Monitor - Programm Lufttisch / Air bed Lichtschranke / Light guard Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include

Granulator, heavy-duty version Manufacturer: NEUE HERBOLD, D-74889 Sinsheim Drive: 160 kW Hopper: Conveyor belt hopper with forced feeding by means of screws Working width: 1600 mm Rotor diameter: 1000 mm new machine in stock

2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB >>2025 generalüberholt / 2025 complete overhauld<< Year 1969 - Serial-No. 34364 Size max.: 570 x 820mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3 Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

Stanztiegel in einem guten Zustand / Letter Press DIE Cutter in good Condition Stanztiegel / Letter Press DIE Cutter Heidelberg GTS Baujahr / Year 1965 - Serial-No. 62990 Size min. 85 x 102mm - max. 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Stanzleistung / Punching Pressure 60T Weight approx. 2250kg Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

In einem sehr guten Zustand, Letter Press Cylinder DIE Cutter Heidelberg S in good working condition. Stanzzylinder / Automatic DIE-Cutter Cylinder Heidelberg S Serial-No. 13934 Size max. 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

Frontschnittmaschine in einem sehr guten Zustand / Front Cutting Unit in very good condition Frontschnittmaschine / Front Cutting Unit Theisen & Bonitz S 201 Baujahr / Year 2021 - Serial-No. 7237 in einem sehr guten Zustand // in very good condition

Gullotine Wohlenberg WP 115 MCS-2 TV with Light guard and air bed. Schneidmaschine / Gullotine Wohlenberg WP 115 MCS-2 TV Baujahr / Year 1994 - Serial-No. 3563-009 Schnittbreite / Cutting width max. 1150mm Monitor - Programm Lufttisch / Air bed Lichtschranke / Light guard Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include

Auction-ID: A7-50158-17

Co2 ByLaser 2200M Flue gas extraction with water cooling WKL 300-F Laser power: 2.2 kW (2200 W) Maximum sheet thickness (mild steel): 8 mm Maximum sheet thickness (stainless steel): 6 mm Maximum sheet thickness (acid-resistant steel): 6 mm Maximum sheet thickness (aluminum): 4 mm Maximum workpiece dimensions (L x W): 3000 x 1500 mm Laser Type: CO2 Wavelength: 10.6 μm 2x cutting head 5\" 1x Cutting Head 7.5\" Various copper nozzles Auction-ID: A7-50158-16

Starting Hole Wire EDM Machine WDS SB 2M

BEVEL head - 5 axes, SIDEROS table with size 4000 x 6000 mm, SIDEROS external filter ECO16CT COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-5

45 cm cutters. Ideal for cutting wires, ropes, cables and bolts. Auction-ID: A7-50066-298

Manufacturer: Trumpf Model: TruLaser 3030 Year: 2021 Condition: Used Stock number: 9520 Laser ON: 36160 h Beam ON: 23760 h Laser power: 6 kW Work table length: 3000 mm Work table width: 1500 mm Source: TruDisk 6001

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/gasoline mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-50066-400

Set of bore hole cutters sizes from 18-30-32-35-55 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-50208-250

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50066-217

Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-50066-83

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50066-17

Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-50066-283

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50066-117

45 cm cutters. Ideal for cutting wires, ropes, cables and bolts. Auction-ID: A7-50066-198

Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-50066-183

Complete set of metal hole cutters hss, sizes 20- 25-30-35-40 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-50208-319

Set of bore hole cutters sizes from 18-30-32-35-55 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-50208-128

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/gasoline mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-50066-399