cut used for sale

: 400 x 32 mm capacity 90 degrees: round: 145 mm capacity 90 degrees: square: 130 x130 mm capacity 90 degrees: flat: 300 x 80 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 115 x 115 mm capacity 45 degrees: flat: 250 x 60 mm total power requirement: 1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1000 mm   grinding width: 600 mm   vertical travel: 350 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1360 mm   table surface (front-back): 550 mm   workpiece load (max): 1000 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (min): 1000 /min   spindle revolutions (max): 6500 /min GRINDING TOOL   type of grinding tool: wheel   diameter (min): 500 mm   borehole: diameter: 203 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 91 kW   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS (GRINDING)   coolant unit: yes - 4500 operating hours - Very good and well-maintained condition - Machine body: Meehanit cast iron - Linear guides - Diamond dressing roller: Ø135x100x52 - Automatic balancing system - Programmable slow, fast,  ...

Impressions=0 m, Condition= Very Good , Availability= 2026-08-20, 2026 Revision Max Speed Rating (Sheets / Hr) 9,000 / hour Substrate types (Paper / Board / Corrugate) Paper / Board Quick Action Plate Clamps Centre Line System Yes Stripping Station: Yes Blanking Station: No Oil heater with timer Yes Quick-lock Yes Pre-Make-Ready devices Chase changer Very good condition Immediately available

Wire EDM System GF AgieCharmilles CUT 2000 with loading robot (WorkPartner) General Information Machine type: CNC wire EDM machine with automation Model: CUT 2000 Automation: GF WorkPartner loading robot Control: Vision 5 (Windows XP) Generator: AGIE IPG-V high-performance generator Operating Hours Power On:  91,716 h Work On: 17,889 h Working Area / Travels X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm U/V Axes Travel: ±70 mm Workpiece Data Max. workpiece size (W × D × H): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (standard), 400 kg (optional / bath load) Working table: 700 × 450 mm Machining Parameters Taper: 30° at 100 mm workpiece height Available wire diameters: 0.10 – 0.30 mm Best achievable surface finish: Ra 0.05 µm Wire threading: automatic Dielectric System Dielectric capacity: 700 liters Flushing: coaxial flushing system Cooling: external cooling ...

General SKU291Y508 LocationBarneveld MakeStephan TypeUMC 12-F No.719.063.01 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume12 Ltr. Motor1.8 KW Specified Features - Cutter Cuttercheck Capacity12 l. Diameter320 mm Depth200 mm Knife diameter200 mm Number of knife blades1 With scrapermanual Inletcheck Outletcheck With jacketcheck Motor1,8 kW, 380 V With variable speed drivecheck Speed150—2800 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General Year of construction1992 Mounted on wheelscheck With switchgearcheck Floorspace1,00 x 0,65 m Total height1,30 m Weight180 kg Extra SpecificationsWith vacuum pump, 0.37 kW, 220 V, 2700 rpm, Stephan temperature meter, and spare parts.Consumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersCuttersFeed additivesPaper & otherDetergent & surf.CosmeticsOrganicsFood additiv ...

Perfecta 92 Paper Cutting Guillotine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Perfecta 92 Paper Cutting Guillotine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Perfecta 92 Paper Cutting Guillotine Price: 12500 EUR Download PDF Perfecta 92 Paper Cutting Guillotine The machine is in very good condition, serviced and ready to use. Technical Specifications: Cutting width: 920mm Stack height: 120mm Minimum scrap: 18mm Weight: 2300kg Power supply: 400V Equipment: – Brand new programmer and complete control system – New photocells – Air table – Hydr ...

Wohlenberg 115 TS Paper Cutting Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Wohlenberg 115 TS Paper Cutting Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Wohlenberg 115 TS Paper Cutting Machine Price: 33000 EUR Download PDF Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such a ...

Polar Mohr 115 X Plus Paper Cutting Guillotine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr 115 X Plus Paper Cutting Guillotine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr 115 X Plus Paper Cutting Guillotine Price: 41000 EUR Download PDF Polar Mohr 115 X Plus Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165 ...

Polar Mohr 78 X Paper Cutting Guillotine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr 78 X Paper Cutting Guillotine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr 78 X Paper Cutting Guillotine Price: 19500 EUR Download PDF Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Enlarged side tables Chrome table surface Table lighting and optica ...

turning diameter: 300 mm turning length: 284 mm control: Fanuc x-axis: 170 mm z-travel: 335 mm total power requirement: kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wire EDM machine, year 2016, CNC Schermo TFT 19 pollici, sistema operativo Windows 7. Used machine in good condition. More info & price on IndustrialBuyer.

wire EDM machine, year 2015, CNC Schermo TFT 19 pollici, sistema operativo Windows 7. Used machine in good condition. More info & price on IndustrialBuyer.

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

K+G Weather SM 120 T2M-R, 120 litre cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keypad, knife shaft speed 2-tourig, 2 bowl speeds, mixing gear forward and backward, temperature-end shutdown, digital display knife shaft temperature bowl, knife head with 6 knives. The machine is currently undergoing refurbishment and will be available shortly.

K+G Wetter SM 65 STL bowl cutter, 65 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife Speed, 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse, temperature switch off function, knife head with 6 knives. The machine is immediately available and can be tested like in Koblenz, Germany.

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

Laska KU 65 cutter, bowl capacity 65 liters, microprocessor control, membrane keyboard, stepless speed control, 4 freely programmable fixed speeds, mixing gear forward and backward continuously, 6 knife head, electric knife shaft brake, noise protection cover. The cutter can be tested in 56070 Koblenz.

Kramer + Grebe SM 45 STL, 45 liters bowl cutter, all stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, 2 knife speeds, mixing speed forwards, 2 bowl speeds, standard knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

Duker Rex RK 45, 45 liters bowl cutter with brand new noise reduction cover, 2 knife speeds, mixing 2 speeds, 2 separate bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

MADO MSM 764 SUPRA 50 M, 50 Liters bowl cutter, 2 knife speeds, mixing speed forward and reverse, 2 bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

Kilia Meister Plus 50 bowl cutter, 50 liters bowl of stainless steel, almost completely made of solid stainless steel, Siemens control, noise absorbing cover of transparent special plastic, central point of lubrication for knife shaft, balanceable and exchangeable knife head, variable knife speed, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Type Cutters Warranty 12 months Height 2350 Width 2200 mm Length 1910 mm Weight 4000 kg Voltage Electrical: 400V 50Hz 3N Installed Power 57.25 kw Main material Stainlees Steel Time of realisation in stock Cutter Type Bowl Cutter Cutter made of Stainless steel Bowl made of Stainless steel Bowl capacity 200 l Efficiency 100-140 kg/cycle Knives amount 6 pc. Knife shaft revolutions 900/1800/3600 rpm Bowl revolutions 7.5/10/15 rpm

K+G Wetter SM 65 T2M-R, 65 liters bowl cutter, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake, main switch as well as electric control cabinet integrated, membrane keyboard, 2 knife speeds 1.500 – 3.000 rounds per minute, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.

K+G Wetter SM 90 STL bowl cutter, 90 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife speed up to 5,000 rpm., 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse (40-500 UpM), temperature switch off function, knife head with 6 knives, power 32 kW. You are very welcome to test the machine in our facility in Koblenz, Germany.

Kilia vacuum bowl cutter, 200 liters bowl cutter, bowl and bowl-cover stainless steel, hydraulic noise reduction cover, knife shaft brake electrically operated, membrane keyboard, variable knife speed, knife head, hydraulic loading device, hydraulic unloader

Kilia 50 liters bowl cutter, Siemens control, 2 knife speeds, 2 bowl speeds, mixing speeds forwards and reverseard. You are very welcome to test the machine in our facility in Koblenz, Germany.

K + G wetter SM 120 STL, 120 litres cutter, membrane keyboard, variable knife speed, 2 bowl speeds, mixing speed forward and backward, S + S knife head with 6 blades, unloading device, hydraulic loading device. You are very welcome to test the machine in our facility in Koblenz, Germany.

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.

Alexanderwerk HTC 65, 65 Liters bowl cutter, stainless steel Version, 2 knife speeds, 2 bowl speeds, 2 mixing speeds vorwards and reverse You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Kilia vacuum bowl cutter, year of manufacture 2010, 200 liters bowl cutter, bowl and bowl-cover stainless steel, hydraulic noise reduction cover, knife shaft brake electrically operated, membrane keyboard, variable knife speed, variable bowl speeds, mixing speed, hydraulic loading device for 200 liter bins, hydraulic unloader, You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Cutter 65 ltr. CPL. Stainless steel mixing speed

MADO MSM 765 SL SUPRA 70, 70 liters bowl cutter, two bowl speeds, mixing speeds, knife head with 6 knives, refurbished

Kramer + Grebe VSM 200 STL 200 litre vacuum bowl cutter stainless steel bowl variable knife speed two bowl speeds loading device for 200 liter standard trolleys unloader

Bettcher Power cleaver / slicer Model: 39 Stainless frame, six product chutes on turntable, with stainless circular blade for slicing, ideal for slicing salami / pepperoni etc

Type: Ruhle SR2 with Elevator Loading sections (L x W x H): 500x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set Capacity: up to 1800 kg/hour Electric power: 3.5 kW Machine dimension in cm: Width: 70 cm Lenght: 180 cm Height: 125 cm Delivery time: 10 working days after advanced payment

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

Type New Bowl choppers Height 1750 Width 2250 mm Length 2000 mm Weight 3100 kg Capacity 120 l Voltage Electrical: 400V 50Hz 3N Installed Power 52 kw Main material Stainlees Steel

Type Cutters Height 1900 Width 700 mm Length 1300 mm Weight 270 kg Voltage Electrical: 400V 50Hz 3N Installed Power 11 kw Main material Stainlees Steel Cutter Type Emulsifier Knife shaft revolutions 2900 rpm

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -1x milling cutter: Ø 52/170 mm -Diameter: 22 mm -Weight: 2 kg

End mill, roller cutter, milling cutter, disc cutter, slot cutter -Disc cutters: 2 pieces Ø100/125 mm, cross-toothed -Type: 125Øx6x40Ø K10 / 100Øx14x40Ø/ K10 -Hole: Ø 40 mm -Price/Fee: complete -Transport dimensions: Ø 125 x 20 mm -Weight: 0.8 kg

Very well maintained 80 liter machine, with 2 x knife shaft speed + 2 x bowl speed

Cutter Kilia 200 liter Express, surface, bowl lid and bowl stainless steel, noise protection lid, loading, ejector, knife shaft brake, knife shaft speed 2-touring

Industrial cutter Seydelmann K 206 Ultra, 200 litre bowl made of stainless steel, largely solid stainless steel, operation via cross lever switch, separate digital display, main cover and product ejector hydraulic, transparent noise protection cover made of special plastic, separate stainless control cabinet with built-in main switch, central lubrication point for knife shaft, balanced, exchangeable knife head, 2 knife speeds, 2 mixing gears forward, 2 separately switchable Bowl speeds, DGA control, temperature sensor, 6-knife head, 400 volts, 50 Hz, 200 amps

Seydelmann Kutter K 40 Ultra, Seydelmann K 40 U, 40 liter bowl made of stainless steel, largely solid stainless steel, operation via toggle lever switch, separate digital display, noise protection cover made of transparent special plastic, central lubrication point for knife shaft, balanced, replaceable knife head with new knives of your choice, 2 knife speeds, 2 bowl speeds, 2 mixing gears forward, DGA control, 6-knife head, 3-knife head optional for an extra charge available, operating voltage 400 V / 50 Hz

Seydelmann K 60 DC-6, 60 litre cutter with ejector, largely solid rust-free, operation via toggle lever switch, separate digital display in stainless protective housing, separate stainless control cabinet, noise protection cover made of transparent special plastic, central lubrication point for knife shaft, balanced, exchangeable knife head, 6 infinitely programmable knife speeds up to 5,000 rpm, 2 bowl speeds, 6-knife head

Cutter Kilia 5000 Express 500 liters vacuum cooking fast cutter, knife shaft with 6 fixed programmed speeds, 4 forward and 2 backward, infinitely variable bowl drive, electronic thermometer, electronic tour counter, hydraulic noise protection cover, hydraulic knife cover, hydraulic ejector, knife head 8-piece, separate control cabinet made of stainless steel

Cutter Laska model KU 65 AC, bowl capacity 65 liters, microprocessor control, probe plate with membrane keypad and plain text display, infinitely adjustable knife shaft 35-4,900 rpm, two bowl speeds, mixing gear backwards infinitely variable, electric knife shaft brake, 6-knife head, 3-knife head optionally available for an extra charge, engine power 23 kW, operating voltage 3 x 400 VAC / 50 Hz

Cutter / Cutting Mixer / Bowl Cutter Manufacturer: DMS (Dillmann Maschinensysteme Saarbrücken) Type: DMK 80 V2 Equipment: Bowl: stainless steel, 80 liters capacity, designed for approx. 65 kg roast Blade speed infinitely variable from 1000 - 3600 rpm Mixing gear backwards, infinitely variable from 100 - 300 rpm 2 bowl speeds 8/16 rpm electric knife shaft brake Automatic switch-off when opening the lid Thermometer digital Noise protection cover Integrated switch box 6er knife head additional 2x 6 knife set including 4 wrenches original instruction manual Storage machine, immediately available! Specifications: 400V / 50/60 Hz / 21+0.9 kW / 43 + 2.8 A / 64 A CEE plug Total dimensions with the lid closed: H115 x W135 x D120 cm Year of construction: 2018 Weight: approx. 1040 kg Function tested / Machine ready for immedi ...

LASKA VACUUM CUTTER KU 750 V

Seydelmann vacuum and cooking 750 litre bowl cutter. Has come direct from closed pate factory. Bought new in 2008, 2 identical machines available. We will have video of these running shortly.