134,838 used machines on RESALE, but how to find them? Machine Search
A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible.
Droogscheider voor fijnstof Maximale luchtstroom: 7000 m³/uur 7,5 kW 12 filterelementen 93,8 filteroppervlak Afmetingen: 1800 x 1600 x 2700 mm Gewicht: 1430 kg
width 78 cm Age 2007 computer control with monitor Touch Screen air table 2 side tables Delivery time: Immediately Ref: PO250119A
Manufacturer: Hegla Year of manufacture: February 2002 Model: VSG-A 46 MT Type of machine: Cutting system for laminated safety glass (VSG) Running direction: right to left Connected load: 35 kW Dimensions of the system (width x height x length): 13.2 x 6 x 1 meters Maximum glass size (width x height): 4600 x 3210 mm Maximum single glass thickness: 16 mm Condition: Rated 2 out of 6 (good), where 1 is very good and 6 is unsatisfactory Operational status: Operational (yes) Additional equipment: Annual maintenance carried out by Hegla Additional documentation included: Operating manual, wiring diagram, layout drawing Remarks: Stops are worn in line with the age of the machine; mechanical alignment required Find more here - .ucymachines/ Contact us at - sales@ucymachines
A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible.
IDEAL 7260 Pile Cutter, Year 2019 electric, cutting length 720 mm, cutting height 80 mm, automatic pressing, programmable back gauge, Light barrier, air table, Made in Germany.
A ZinserCNC plasma cutting machine is offered, max. plasma capacity: 130A, max. plasma material thickness: approx. 25mm, max. oxy-fuel material thickness: approx. 200mm, cutting table dimensions X/Y: approx. 2750mm/10500mm, working area X/Y: approx. 2000mm/9000mm, X/Y drive: rack and pinion, control: Zinser CNC 500. Inspection possible by appointment.
Trumpf TruLaser 3040Year of manuf. : 2021 Movement X/Y/Z : 4000/2000/116 mmPower : 4 kW____________Description:Standard equipmentWorking area:4000 × 2000 mmControl cabinets:IntegratedDrive technology:Gantry combined with linear direct drivesWaste removal:Longitudinal conveyor beltPositioning laser diode:IncludedSpray system:IncludedAutomatic nozzle cleaning:IncludedFeatures:- NitroLine:- AdjustLine:- ControlLine:- FlyLine:- FocusLine:- FastLine:- PierceLine:- Brass cutting set:- Copper cutting setLaser TruDisk 4001:- Power 4 kW:- BrightLine Fiber:- High-Speed Cutting Package:- Power Package for Fusion CuttingAdditional machine functions:- Drop&Cut:- Integrated camera 1 for process monitoringAdditional cutting packages:- High-speed Eco cutting package:- Pneumatic cuttingTechnical specificationsSimultaneous operation:170 m/minAverage positioning deviation (Ps):0.03 mmPositioning dev ...
A custom-built slitting and straightening machine Grossmann/BFW for aluminum strip is available. Strip width: 35mm, Straightening unit: multi-roll, Knife type: rotary knives, Strip guidance: roller guidance, Tension control: KTC800A. Documentation available. An on-site inspection is possible.
One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: ap ...
This 3-axis AMADA LC-2415αIII was manufactured in 2000. It features a laser power of 2 kW and a maximum sheet format of 1,500 x 5,000 mm. The machine has been regularly maintained by Amada Switzerland and includes a newly installed turbo-blower in 2024. If you are looking to get high-quality laser cutting capabilities, consider the AMADA LC-2415αIII CO2 laser cutting machine we have for sale. Contact us for further details.
Tenon cutting and slotting slotting PANHANS 1376 -used----------- Technical data ----------length of the base plate: 1,000 mm, sliding travel: 710 mm, size of the sliding plate: 295 x 225 mm, installation height approx.: 56 mm
This 3-axis GILARDI EFESTO 3.6 was manufactured in 2022. It features a working area of 3,000 × 1,500 mm and a powerful 6 kW laser source for efficient cutting. If you are looking to get high-quality fiber laser cutting capabilities, consider the GILARDI EFESTO 3.6 machine we have for sale. Contact us for further details.
WOHLENBERG 44 FM 50 -Year 1989, totally rebuilt in 2019 -3 knives trimmer -Height of staples: up to 100 – 125 mm -Mechanical speed: 20 – 50 staples/min -Format in operation without automatic feeding: -Max. untrimmed 315 x 460 x 80 mm -Minimum Book Size: 70 mm x 80 mm -Maximum Book Size: 300 mm x 44 0mm -Automatic infeed -Offcut blower -Central lubrication -Equipment for changing the format -many set of clamp plates & plate holders -1 set of knives -Machine full and complete in very good working conditions -Totally refurbished with all new electric cabin -Touch screen control for all the functions -Tec-Graf automatic pre-stacker, counting and feeding station -Connection belts between pre-stacker and the three knives trimmer -Available immediately
A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible.
A Trumpf CNC 2D solid-state laser cutting machine is available. Laser source: Trumpf TruDisk 4001, laser power: 4kW, wavelength: 1030nm, working dimensions X/Y: 3000mm/1500mm, Z-axis travel: 75mm, max. workpiece weight: 900kg, max. simultaneous traverse speed: 140m/min, max. mild steel thickness: 25mm, pallet changers: 2. Machine dimensions X/Y/Z: approx. 8300mm/6800mm/2300mm, weight: approx. 7750kg. Documentation available. An on-site inspection is possible. Expected to be available starting 2027.
Reference Num.: 4452 Brand: Polar Type: 78 E Construction year: 1996 Available: directly Status: Not in production Location: Deutschland Cutting Size: 780 mm Equipment: - Lufttisch - Seitentische - Lichtschranke - Programm - Farb-Monitor
This 3-axis Salvagnini L3-4020 fiber laser cutting machine was manufactured in 2017. It features a powerful 6.0 kW solid-state fiber laser source, with a maximum working range of 4064 mm in the X-axis and 2032 mm in the Y-axis. The machine includes advanced automation components for efficient material handling and cutting. If you are looking to get high-quality sheet metal cutting capabilities, consider the Salvagnini L3-4020 machine we have for sale. Contact us for further details.
Ref.nr. 00926 Name of the plant Struers Labopol Grinding and polishing workstation For sale is a professional grinding and polishing workstation Labopol for metallographic sample preparation. The system is suitable for laboratory, quality assurance and materials testing. Manufacturer: Struers Model Labopol 2 Year of construction Condition Technically OK Can be viewed under power Remark Grinding machine function with diamond grinding wheels + water cooling Ref.Nr 00927 Name of the system Struers Labotom-3 separator For sale is a Struers Labotom-3 precision separator for materials testing and metallographic sample preparation. The machine enables precise and reproducible cutting cuts. Manufacturer: Struers Model Labotom-3 Year of construction unknown Condition Good technical condition, can be demonstrated under power Remark Cutting device for grinding ...
TECHNICAL DATA: Working length: min. 200 mm – max. 1500 mm Working width: min. 30 mm – max. 110 mm Working thickness: min. 10 mm – max. 60 mm Saw blade: max. Ø 400 mm Sawing unit: 6 kW (2 x 3 kW) Installed power: 11 kW INCLUDED IN DELIVERY: 01 Waste conveyor belt
turning diameter over bed: 350 mm turning diameter over slide rest: 216 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 40 - 1800 U/min centre height: 170 mm spindle bore: 40 mm total power requirement: 4,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,0 x 0,85 x 1,6 m Centre lathe (lead screw and feed rod) - Digital readout - 3-jaw chuck (160 mm) - Spare jaws - Coolant system - Multifix tool post - 4 Multifix tool holders - Steady rest - Live centre - Chip tray - Chuck guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0330 mm : 210 mm : 1000 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 180 mm
Under-table cross-cut saw Cutting width approx. 500 mm Cutting height approx. 120 mm Cross-cut movement from below, continuous from front to back Capping is triggered by foot switch Motor approx. 3 kW Saw blade diameter 500 mm, saw blade HM-tipped Suction connection on the saw body at the back bottom Diam. 100 mm on each side roller conveyor 3000 mm long, roller length 500 mm, Roll diameter 80 mm, roll spacing from center to center 205 mm One roller conveyor with 2 sliding length stops External dimensions: L 6800 mm x W 950 mm x H 1300 mm
A mechanized Kjellberg CNC plasma cutting system is offered. Cutting current range: 40A-200A, duty cycle: 100%, output power: 200A at 150V, lower operating point: 60A at 104V, material thickness range: approx. 3mm-60mm, maximum piercing capacity: approx. 30mm, applicable plasma gases: air, oxygen, argon/hydrogen mixture, nitrogen, suitable materials: mild steel, stainless steel, aluminium, electrically conductive materials. Dimensions: approx. 980mm/644mm/1320mm, weight: approx. 370kg. Inspection possible by arrangement.
Cauhe S-IV A 120×160 Hot Stamping Press - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Cauhe S-IV A 120×160 Hot Stamping Press Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Cauhe S-IV A 120×160 Hot Stamping Press Price: 37500 EUR Download PDF Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time ...
Weight: 1,3 t turning length: 40 mm cylinder: 0-0,5 rapid traverse: 3,7 m/min reus: U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 510 mm, 1500 mm, 300 U/min
Hello, I get this lathe at the beginning of August. With a lot of accessories: steady rest, lathe chuck – clamping jaws, quick-change holder and.. Heidenreich & Harbeck Type Hanseat 480 Year of manufacture 1980 Center height 255 mm Turning diameter over support 300 mm Center width 1500 mm 24 speeds from 23.6 to 2500 n1/min Tailstock MK 4 Chuck F 250 Motor 380 Volt 11 kW Transport dimensions: Length 3200 mm Width 1200 mm Height 1550 mm Weight 2.5 to. Lathe Hanseat 480 incl. accessories St Description 1 instruction manual 1 Lynette small 1 Lynette large 1 4- Jaw chuck small 1 4- Jaw chuck large 15 quick-change tool holders Set designation 2 jaws for 4-jaw chuck 38 jaws for 3-jaw chuck
Key data: 12 mm, 3000 1/min, 1250 mm
Automatic thread processing machine Multitapper 1212 CoastOne - Made in Finland Demonstration machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optional 4; only retrofittable) 2x threading, molding; 1x Lowering Station Microlubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files Warranty: 36 months after installation Immediately available; Subject to prior sale Viewing under power possible at any time by arrangement
THREE KNIVES TRIMMER KOLBUS MD 155 -Year 1985 -Max untrimmed length 320 mms. /Max untrimmed width 460 mms -Min untrimmed length 11 mms. /Min untrimmed width 12 mms. -Max trimmed length 31 mms. / Max trimmed width 44 mms. -Min trimmed length 10 mms. / Min width 11 mms. -Automatic book infeed -Control cabin -Max speed 45 books/min -Three set of knives -Tools, accessories, in good working conditions
Digital program Central air table CNS chromed tables Light guards 2 Knives Tools, manuals with electrical diagrams etc. Complete cleaned, checked and tested
Plasma Power Source Plasma Cutting Machine Manufacturer: Kjellberg Type: HiFocus 80i Year of Make: 2008 Power: 80A Cutting thickness: 0.5 to 25 mm Incl. hose package and burner Manual gas console
Key data: 1250 mm, 1 mm
Qty. 1 Second-hand cut-to-length line including straightening, polishing and grinding units Manufacturer: UNGERER / GEORG, EMG, IMEAS Built: 1986 / 1997 /1998 / 2009 still in operation Material: stainless steel Strip width: 500 – 1.250 mm Thickness: 0.40 – 1.00 mm Coil weight – DECOILER max.: 10.0 t RECOILER max.: 5.0 t Coil ID – Ø 500 mm OD – Ø 1.500 mm Sheet length: 500 – 6.000 mm Stacking weight max.: 4.000 kg Working speed – grinding max. 20 m/min. Working speed – grinding + brushing: 4 – 12 m/min. Working speed – brushing: 4 – 6 m/min. Working speed – cutting max.: 20 m/min. Working direction right ⇒ left Length tolerance ± 0.40 – 3.000 mm
thread dia.: bis 4 / 100 mm threading length: ? mm thread pitch: div. mm accessories:: 4 Schneidköpfe total power requirement: 0,75 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 1,511,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: div mm square edge steel: div mm L-beam: div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3048 mm table width: 1524 mm burner heads: 1 Control: CNC workpiece weight: 1095 kg traversing speed: 180 m/min weight: 4150 kg dimensions of the machine ca.: 9392 x 2232 x 2307 mm Laser cutting system with automatic shuttle table configuration 1. Bodor Power 12kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. mortise-and-tenon nameplate welded segmented bed 5. stretched aluminum gantry 6. bodor servo motor and driver 7. bodor rack and pinion 8. one-click processing 9. bodor lightning perforation technology 10. expert database for high-speed cutting 11. automatic adjustment of cutting gas pressure 12. open door protection 13. alarm function for cutting malfunction 14. ergonomic remote control (Bodor Mango®) 15. active anti-collision function 16. intelligent anti-shake 17. gas-saving continuous flow nozzle 18. intelli ...
table length: 4000 mm table width: 2000 mm burner heads: 1 Control: CNC workpiece weight: 2510 kg traversing speed: 200 m/min dimensions of the machine ca.: 11599 x 3380 x 2718 mm Laser cutting machine with automatic shuttle table Configuration 1. BodorPower laser source 12 kW 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Stretched aluminum portal 6. One-click fully automatic processing 7. Automatic layout of residual material 8. Edge detection and automatic zeroing of the focal length through intelligent detection 9. Bodor Lightning perforation technology 10. 21.5-inch monitor with touch function 11. Intelligent control of gas pressure 12. Automatic adjustment of cutting gas pressure 13. Bodor Mango® ergonomic remote control 14. Active anti-collision function 15. Intelligent vibration protection 16. Int ...
turning length: 1000 mm turning diameter: 210 mm swing diameter over bed slide: 300 mm centre height: 167 mm spindle bore: 40 mm bed width: 210 mm turning speeds: 40 - 2500 U/min total power requirement: - kW weight of the machine ca.: 1000 kg. range L-W-H: 2000 x 1000 x 1700 mm Features: - Digital display - 3-jaw chuck - Chuck guard - Multifix quick-change tool holder - Chip deflector - Chuck guard - Coolant system - Bed stop - Instruction manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table width: 3000 mm table length: 1500 mm burner heads: 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERT with extraction system PFC-4 Plus 4kW F3800 Technical data HYPERTHERM Powermax 125 plasma cutting unit: Cutting capacity: Recommended: 38mm Maximum: 44mm Separating cut: 57mm Piercing: 25mm Output current: 30-125A Mains connection: 400v-36A Compressed air requirement: 260l/min Air pressure 5.9bar Dimensions: 592 x 274 x 508 mm Weight: 49kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60 ...
turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60- ...
table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 900 kg traversing speed: 91 m/min weight: 4980 kg dimensions of the machine ca.: 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 12 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 1 ...
turning length: 1000 mm turning diameter: 330 mm turning dia. over face-slide: 198 mm turning dia. in gap: 476 mm spindle bore: 38.0 mm turning speeds: 70 - 2000 U/min bed width: 180 mm spindle taper: DIN ISO 702-2 Nr. 4 taper in tailstock: 3 MK quill travel: 110 mm total power requirement: 1.5 kW weight of the machine ca.: ca. 610 kg. range L-W-H: 1930 x 755 x 1300 mm Features - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing assembly with precision-grade angular contact ball bearings - Single-lever chuck for the tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gearhead - Optimally suited for machining steel, non-ferrous materials, and plastics - Removable bridge for machining workpieces with large . diameters - To minimize the effects of vibration, the solid prismatic bed . is additionally equipped wit ...
thread dia.: bis M 24 turning speeds: 0-600 / 0-150 U/min thread: M5 - M24 working area: 2050 Rmax. working range: 500 Rmin. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3,0 kW weight - pallet system: ca. 300 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) including table clamping disk Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base Oil tank + hydraulic unit integrated in the base frame hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 The data for this ad was created with ModulMWS - the software so ...
x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...
round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 360 mm turning length: 1000 mm swing diameter over bed slide: 360 mm centre height: 180 mm turning speeds: 70-2400 U/min total power requirement: 2,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 2000x1500x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions The data ...
maximum number of results exceeded
please refine your search
