cut used for sale

A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible.

Inv. Num. : 9078 Type: LC 3015 F1 NT Producer: AMADA Generated: Parameters: Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3070 mm Y-axis feed length: 1550 mm Feed length Z-axis: 100 mm

Qty. 1 Second-hand Automatic Die Cutter Mfc.: Bobst Type: 102 E II Automatic Die Cutter Built: 1996 Speed: 7,500 Sheet per hour Max. Sheet Size 720 x 1020 mm Raised: 30 cm Steel Plate Feeder Lefthand Pull Sidelay Active Front Lays CUBE Touch Screen Computer Operation Chase with 1.0 mm Cutting Plate Centerline Micrometric Adjustment Quick Lock Chase Double Action Stripper Quick Lock Stripping Frames Spare Stripping Frames Selection Bars And Pins Non stop Delivery New Chains, Clutch & Brake 3 Years ago, only used as a backup machine since then

This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting unit capable of cutting up to 70 mm thickness. The machine offers a cutting speed range of approximately 0 – 5200 mm/min. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details.

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This TRUMPF TruLaser 3030 (L20) was manufactured in 2013. A robust CO2 laser cutting machine, it features a Siemens control system, a laser power of 3200W, and workpiece dimensions of 3000 x 1500 mm. With a travel speed of 140 m/min, it ensures efficient operation. Consider the opportunity to buy this TRUMPF TruLaser 3030 (L20) CO2 laser cutting machine. Contact us for more information about this machine.

Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Module cutter: Hobbing cutter -Type: Mod.3.5 Ø 85 mm -Hole: Ø 32 mm -Dimensions: Ø 85 x 85 mm -Weight: 1.8 kg

CO₂ laser cutting machine manufactured in 2016. This HARTWEG industrial Bodor CL-1610XUF features a working area of 1600 × 1000 mm and a laser power of approximately 150 W. It offers impressive engraving speeds of up to 60,000 mm/min and cutting speeds of up to 40,000 mm/min. If you are looking to get high-quality laser engraving and cutting capabilities, consider the HARTWEG industrial Bodor CL-1610XUF machine we have for sale. Contact us for further details.

Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Reishauer, hob cutters, 3 pieces -Type: Ø 50 mm / Ø 55 mm / Ø 62 mm -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 115/65/H70 mm -Weight: 1.3 kg

This 3-axis LVD Phoenix fiber laser cutting machine was manufactured in 2017. It features a cutting length of 6040 mm, width of 2040 mm, and can handle material thickness up to 20 mm. Consider the opportunity to buy this LVD Phoenix fiber laser cutting machine. Contact us for more information about this machine.

greates pass round over bed: 350 mm swing diameter over face slide: 200 mm centre distance: 800 mm centre height: 175 mm turning length: 700 mm 3-jaw chuck: Röhm Ø 160 spindle bore: 46 mm spindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/min tailstock quill taper MT: 3 weight of the machine ca.: 1000 kg 3-axis digital readout manual included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information.

STM WS 3015 MasterCut 2D waterjet cutting machine was built in 2013 in Germany by STM STEIN-MOSER GmbH. The machine has been regularly maintained throughout its service life, which means that it is in very good technical condition and ready for further use. The STM WS 3015 MasterCut 2D is an extremely versatile machine for precision machining of a wide range of materials, i.e. metal, plastics and glass. It is distinguished by the use of modern components and a robust design, which remains stable even under the most demanding challenges. The machining process is performed by a numerically-controlled workhead, which moves in three axes X,Y,Z with feeds of 3002 mm, 1502 mm and 180 mm respectively. Only water or water with an abrasive additive is used for cutting, making the process free of harmful fumes and safe for the environment. The use of waterjet cutting technology in production gu ...

CO2 laser cutting machine manufactured in 2001. This TRUMPF Trumatic L3030 features a laser power of up to 3208 W in CW mode, providing efficient cutting capabilities. It operates on a 3-phase AC supply. If you are looking to get high-quality cutting capabilities, consider the TRUMPF Trumatic L3030 machine we have for sale. Contact us for further details.

This AMADA ENSIS-3015 AJ was manufactured in 2019. A fiber laser cutting machine, it represents a reliable option for precise cutting tasks. Consider the opportunity to buy this AMADA ENSIS-3015 AJ fiber laser cutting machine. Contact us for more information.

This 3-axis AJAN PP16011 Auto plasma cutting machine was manufactured in 2016. It features a cutting area of 2000 x 3000 mm and can handle a maximum cutting thickness of up to 30 mm. The machine is equipped with a fume extraction and filtration system, ensuring a cleaner working environment. If you are looking to get high-quality plasma cutting capabilities, consider the AJAN PP16011 Auto machine we have for sale. Contact us for further details.

A relatively new CNC waterjet cutting system Intermac is available. Working dimensions X/Y: 3000mm/2000mm, operating hours: approx. 4500h. Documentation available. An on-site inspection is possible.

This 3-axis 4JET Pearl M fiber laser cutting machine was manufactured in 2020. It features a maximum laser output of 80 W and a base area of 2400 x 2620 mm, making it suitable for various cutting applications. The machine includes an ASD 300 extraction unit and a variable control panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the 4JET Pearl M machine we have for sale. Contact us for further details.

Wet cutter for roof tiles, lightweight version for use on sloping roof surfaces

This 3-axis Bystronic BySprint Fiber 4020 Fiber 4Kw was manufactured in 2019. It features a maximum sheet size of 4000 x 2000 mm and a powerful 4000-watt laser. If you are looking to get high-quality fiber laser cutting capabilities, consider the Bystronic BySprint Fiber 4020 Fiber 4Kw machine we have for sale. Contact us for further details.

Side Tables, Light Barriers, Programmable, Standard Accessories

Optimizing Cross-Cut Saw manufactured in 2021. This Paul Reinhardt SlimLine 110 features automatic cutting capabilities, accommodating wood lengths from 300 to 3000 mm and widths from 30 to 350 mm. It is designed for various wood types, including MDF and solid wood, with a maximum cross-section of 58 x 125 mm. If you are looking to get high-quality cutting capabilities, consider the Paul Reinhardt SlimLine 110 machine we have for sale. Contact us for further details.

Holtec mobile cross-cut saw Type PICCOLO Year of manufacture 2011 CE Cutting length of the sword 1540 mm Suitable for cross-sections of max. 1150 x 1150 mm Motor power 7.6 kW, 14.5 A, 400 V, 50 Hz

A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible.

This 3-axis HGTECH Marvel 6000-3015 fiber laser cutting machine was manufactured in 2022. It features a working area of 3000 x 1500 mm. The machine is equipped with a Siemens SINUMERIK 840D SL CNC control and an automatic pallet changer for enhanced productivity. If you are looking to get high-quality cutting capabilities, consider the HGTECH Marvel 6000-3015 machine we have for sale. Contact us for further details.

Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment.

Width 137 cm Year of construction 2000 AUTOTRIM Computer control with monitor Color Monitor Air table refined 2 side tables RA-4 vibrator with spreading roller Transomat TR 130 EL-4 Right-to-left way of working Delivery date: immediately from stock

Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible.

This 3-axis ECKERT Jantar 2 plasma cutting machine was manufactured in 2021. It features a substantial table size of 2000 x 6000 mm and is equipped with a Kjellberg Q1500 MS/Automatic plasma source. The machine can cut steel up to a maximum thickness of 50 mm and offers grooving capabilities up to 35 mm. If you are looking to get high-quality plasma cutting capabilities, consider the ECKERT Jantar 2 machine we have for sale. Contact us for further details.

- Display - Program - Luftitsch - Formica air side tables - Spare blades

This 3-axis ESAB SUPRAREX 3100 SXE was manufactured in 2020. It features high-definition plasma cutting technology with a maximum tube length of 8,000 mm and a maximum tube diameter of 750 mm. The machine includes advanced bevel cutting capabilities and a robust construction with precision guides. If you are looking to get high-quality tube cutting capabilities, consider the ESAB SUPRAREX 3100 SXE tube cutting machine we have for sale. Contact us for further details.

- Programm - air table - side table left and right - spare knife

Router 600 router Spindle to arm distance 600 mm Twin speed spindle drive motor with 2.2/1.5 kw Two spindle speeds 9000/18000 RPM Spindle tilt angle adjustment 45-90-45 degrees Vertical spindle stroke 80mm Height-adjustable table Pneumatic control of the spindle from the pedal

turning diameter over bed: 297 mm turning diameter over bed slide: 160 turning length: 500 mm short taper holder: Größe 5 spindle bore: 36 mm spindle turning speed range: 30-3550 U/min number of speeds: 18 quill adjustment: 90 mm tailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mm total power requirement: kW weight of the machine ca.: 610 kg dimensions of the machine ca.: 1,4 x 0,7 x 1,2 m wedge bar chuck Forkardt: Ø 160 mm Accessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets, Steel Multifix system, size A with 3 quick-change inserts Integrated center point Chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9090 Type: Trumatic L3030 Producer: Trumpf Created: 2001 Parameters: Maximum power: 3 kW Switch-on hours: 49953 h Laser ON: 48307 Beam ON: 20858 s Work table length: 3000 mm Work table width: 1500 mm Source: TLF 3000 Turbo

Highest sheet capacity at 400 N/mm2 x 1000x2 16 A plug Length 1.30 m Width 0.4 m Height 1.30 m Weight 250 kg Tools

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - .ucymachines/ Contact us at - sales@ucymachines

Crosscut saw for miter cuts Brand: SALVADOR Type: Superangle 600 New machine High performance crosscut saw with rotary table for miter cuts -70° / + 70°. Max. Saw blade diameter 600 mm Saw cross section at straight cut: 30 x 100 mm resp. 310 x 160 mm Saw cross section at 45°: 260 x 100 mm resp. 220 x 160 mm Saw cross section at 70°: 120 x 100 mm resp. 100 x 160 mm Rotary table guided on precision bearings Optical system with laser light barrier for detection of the wood length and Luminescence reader to detect the markings. No manual adjustments for wood thickness Powerful Windows software for easy and safe operation

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A paper core cutting machine Sternberg & Phillips with parallel winding capability is available. Winding units: 1, max. core width: 1750mm. An on-site inspection is possible.

Bysprint Fiber 4020 4 KW - Hours: 72,000 - Cutting hours: 20,000 - Last maintenance: 12/19/2025 - All modules in order - Cutting head in order, General overhaul 2024 - Annual scheduled maintenance always carried out by Bystronic

MicroStep 2x plasma 6000 x 3000 mm Longitudinal travel X-axis: 6500 mm Cross travel Y-axis: 3300 mm Cutting capacity: 60 mm Table dimensions: 6000 x 3000 mm Plasmasource: 2x Kjelberg HiFocus 360 amp

A total of two identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l, year of manufacture: 2015/2020. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

CNC Portal Plasma Cutting Machine Manufacturer: Eckert Type: Jantar 2 Year of Make: 2011 CNC control Working area: 2x4 m 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console Extraction table