cut used for sale

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hobs, stud hobs, 3 pieces -Type: Mod.4,5 R1 see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 320/120/H120 mm -Total weight: 13 kg

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 2 pieces -Type: Mod.2.5 R1 EW 15° see photos -Hole: Ø 27 mm -Price/Delivery: complete -Transport dimensions: 270/175/H125 mm -Total weight: 4.3 kg

Pipe cutting machine, pipe cutting saw, pipe cutter -Pipe size: 22-108 mm pipes of the pressfitting systems made of stainless steel, carbon steel, copper -Equipment: Foot switch, steel rollers, stainless steel rollers, cutting wheel, steady rest, workbench, vice -Operating voltage: 220 volts -Dimensions: 1200/870/H1170 mm Transport dimensions: 1200/870/H460 mm -Weight: 61 kg

Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3-0190-60-560-B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife set for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 590/390/H220 mm -Weight: 71 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 50 mm see photos -Bolt circle: Ø 75 x 6 mm -Price/Delivery: complete -Dimensions: 328/190/H8 mm -Weight: 1.2 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Art.No.: 6x 2334850 / 3x 2334830 / 1x 2335190 thickness 1.6 / 1 / 2.7 mm -Price/Delivery: complete -Transport dimensions: 375/111/H20 mm -Weight: 1.6 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: 3 cutting blades, see photos -Hole: Ø 30 mm -Dimensions: 430/310/100 mm -Weight: 22.9 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 6 pieces unused Ovp -Type: Vadura 1215-A -Art.No.: 71615946 -Cutting range: 60-100 mm -Price/Delivery: complete -Transport dimensions: 120/90/H30 mm -Weight: 0.1 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 5 pieces unused Ovp -Type: Vadura 1215-A -Art.No.: 71615945 -Cutting range: 40-60 mm -Price/Delivery: complete -Transport dimensions: 120/90/H20 mm -Weight: 0.1 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Cutting nozzles: Flame cutting nozzles 56 pieces unused Ovp -Type/Quantity: see photos/parts list -Cutting range: 2 - 250 mm -Price/Delivery: complete -Transport dimensions: 200/150/H50 mm -Weight: 0.8 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 40 pieces Ovp -Type: Vadura 1215-A / A-SD 100-150mm / 2-100mm / 2-150mm -Type/Quantity: see photos / parts list -Cutting range: 2-150 mm -Price/Delivery: complete -Transport dimensions: 250/230/H50 mm -Weight: 0.9 kg

Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: Pittler, self-opening thread cutting head -Type: Model A 3 L 1018/20 -Cutting jaws: not included -Bore: Ø 31/24 mm -Hole: Ø 40 mm -Dimensions: 130/125/H170 mm -Weight: 3.6 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/270/H330 mm -Weight: 8.6 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/280/H300 mm -Weight: 7.2 kg

Rail for oxyfuel cutting system, torch, oxyfuel cutting system, machine cutting torch, oxyfuel cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Machine cutting torch rail: Messer Griesheim – Quicky -Dimensions: 11x 1060/105/H8 mm / 2x 2060/105/H8 mm -Lengths: 11 x 1060 mm / 2 x 2060 mm -Price: 45 euros per meter -Transport dimensions: 2060/105/H95 mm Total weight: 28 kg

Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roller, cardboard roll carrier, transport roller, carrying roller -Transport trolley: with cutting device -Roll: Ø 327 x 1800 mm rubberized -Shaft: Ø 50 x 415 mm -Drive shaft/mount: Dimensions see photos -Dimensions: 2355/520/H327 mm -Weight: 286 kg/unit

Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight - precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -Working length: 500 mm -Weight: 100 kg

Radius cutter, milling cutter -Finishing cutter: -1x diameter: 115 mm height 36 mm R18 mm -1x diameter: 120mm height 35mm R17.5mm -1x diameter: 90 mm height 20 mm R10 mm -1x diameter: 120mm height 40 mm R 20 mm -Type: HSS and SS -Number: 4 pieces -Sale: only complete -Weight: 5.6 kg

Polar 92 ED, Year 2001 Display Program Airtable Table left Table right Etc. Available: at short term

Manufacturer: Hüllhorst, Year: 1995, Type: KLS 430, Control: Ferrocontroll, Program: 250, Cutting depth mm: 120, Working hight mm: 60, Holz-Querschnitte mm: yes, Positioniergenauigkeit mm: +45-45, Feeding speed max m/min: 3800 kann verlängert werden, Feeding speed continous adjustable: ca.4, Slewing range degrees: yes, Work piece length max mm: no, wood lenght max mm: 500, Loading stations: 5000, Strichcodierung: yes, Saw Blade Diameter mm: 8, Length to slide in mm: yes, Spindles: yes, Drill head vertical controlled spindles: yes, Exhaust diameter mm: yes, machine ready for demonstration: zusätzlich 90 Grad Sägestation und Etikettendrucker, Year :1995

Rühle SR3 cube and strip cutter (built in 2013), The Rühle SR3 is a fully automatic high-performance cube and strip cutter for industrial use in food processing. The machine stands out with precise cut quality, high throughput, and maximum flexibility for a wide range of products., Whether meat, bacon, cheese, fruit or vegetables – the SR3 processes almost all common raw materials reliably and evenly into cubes, strips or slices., Due to automatic loading, modern control technology, and quick-change system for cutting gates, the machine is ideal for use in production lines with high requirements for efficiency and product quality., Highlights, - Fully automatic high-performance machine, - Universally usable (meat, cheese, vegetables, fruit), - Precise cut images with minimal fracture proportion, - Quick-change system for cutting fences, - Touch control for simple operation, - Mobile  ...

A hydraulic industrial system Schneider for paper and cardboard processing is available. Power: 28kW, oil filling: 400l, operating pressure: 100bar-240bar, max. table load: 300kg, max. product dimensions X/Y: 2000mm/3200mm, weight: approx. 7900kg. An on-site inspection is possible.

Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible.

Cutting table FRITSCH, type: FT 450-L - in very good condition - Many cutting rollers and knives available - El. Connection: 400 V, 50 Hz, 3.0 A, 1.5 kW, 24 V DC Visits and test runs are welcome

Manufacturer: Trumpf Type: Tru Laser 3040 5000 (5kW laser power) CO2 Working area: 4,000mm x 2,000mm Year of manufacture: 2009 Laser on: 24,146 hours Beam in: 10,319 Bh - Cool Line - High-speed cutting head - The machine has always been meticulously maintained by Trumpf under a maintenance contract and is in very good condition Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Polar Model: DCM DCC-M Type: Die Cutter with Counter Pressure Year of Manufacture: 2010 Feeding: Hand feeding per stack Delivery: Inline banding system Technical Specifications - Minimum format for die cutting: 50 x 50 mm - Maximum format for die cutting: 170 x 250 mm - Minimum format after die cutting: 46 x 46 mm - Maximum format after die cutting: 166 x 246 mm - Minimum pile height: 35 mm - Maximum pile height: 120 mm - Minimum height of punch knife: 65 mm - Maximum height of punch knife: 145 mm - Maximum power of die cutting: 50 kN - Minimum power of die cutting: 7 kN - Maximum capacity depending on material: 8 measures per minute - Compressed air demand: 670 l/min Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used bread roll line W&P, type: Rollprofi -In bakery condition- For cut rolls, smooth and round knitted, long rolled and double rolls. - 5 rows - 600 mm working width - Integrated dough divider and drum rounder, Multimatic - Pre-proofing time: 12 min - 6 min before long-distance taxiing station - 6 min between long roller and cutting station - Weight range:24-85 g - Output: max. 4,680 pcs. / h Visits and test runs are possible by arrangement.

Inv. Num. : 9052 Type: OmniMat L 5000 Producer: Messer Created: 2012 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 80 mm Maximum sheet thickness when cutting (stainless steel): 45 mm Maximum sheet thickness when cutting (aluminium): 40 mm Maximum thickness of cut sheet (carbon steel): 50mm Plasma source: HPR 400 XD Machine weight: 2250 kg

The MAXPRO200® plasma cutting system achieves impressive cutting speeds, consistent cutting quality and an exceptional service life of the wear parts in air or oxygen plasma gas. The optimal cutting parameters are automatically set and controlled in one step to simplify operation even more. Designed for mechanized and manual cutting and gouging at high loads and stresses, the MAXPRO200 delivers reliable performance across a wide range of industrial applications. The package offered here consists of: 1. SWIFT-CUT CNC FLAME CUTTING TABLE 1-a. Control Console 1-b. Software 1-c. Cutting table with gantry guide 2. HYPERTHERM MACHINE BURNER 2-a. Hypertherm MaxPro200 2-b. MaxPro200 Wear Parts Kit 3. MACHINE OPTIONS 3-a. Swift-Mark Marking System 3-b. Original Equipment Kit 3-c. LAN port

Stephan MC12 microcut from a company takeover. The cutting ring was equipped with new knives and a new cutter head was installed. After that, the machine was only used a few more times and since the takeover in 2021, it has been standing, which is why the new owner also sold it.

2 side tables 3 knives Photo cells Program

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 600 mm weight of the machine ca.: 400 kg spindle passage: 26 mm speeds: 55-2000 U/min total power requirement: 1,4 kW dimensions of the machine ca.: 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very good conditions

Air table 2 side tables 2 knives Photo cells Program

Net weight= 781 kg,

Net weight= 237 kg,

Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 890 kg,

Height=1.5 m, Overall length= 0.64 m, Overall width= 1.74 m, Net weight= 273 kg,

Polar 78 XT year 2006 with jogger Knorr

Polar 92 ED year 1997 in very good condition Colour monitor light barrier side tables air table

Three-knife trimmer for ShortRun and SingleCopy Softcover products and Hardcover book blocks. The ShortRun D.09 Three-knife trimmer has extreme short change over time and no make-ready parts. Products are trimmed in two separate cutting stations, head and tail trim first and then face trim in the second station. Untrimmed : 325 x 430 mm - 92 x 122 mm Trimmed : 300 x 420 mm - 90 x 120 mm Thickness : 60 mm - 2 mm Head trim : 2 - 25 mm Foot trim : 2 - 25 mm Face trim : 2 - 25 mm Speed : up to 2,400 cycles/hour (in short run mode) - up to 1,200 cycles/hour (in single copy mode)

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of Make: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x Plasma with power source Kjellberg HiFocus 161i Preparation for retrofitting oxy-fuel burners Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control

Food Tools 5AFCE Cheese cutter Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries

Schneider Seantor 115 MC year 1982 overhault in 2003 with new control board air table side tables light barrier in very goog condition

Manufacturer: MicroStep Model: MSF Compact 1501.30L Type: CNC Fiber Laser Cutting Machine Year of Manufacture: 2020 Laser Source: IPG YLS-3000-U Laser Power: 3.0 kW Working Area: 1500 x 3000 mm Maximum Material Thickness: 10 mm stainless steel Power Supply: 3L+N+PE AC 400/230 V / 50 Hz Rated Current: 20 A Weight: 500 kg Protection Class: IP 54/20 Standard: IEC 61439-1 Condition: Used Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches

Key data: 30 mm, 30 mm, 80 mm

Flat steel shears - Flat steel 2° inclination 300 x 10 mm - Flat steel 5° inclination 200 x 13 mm - Knife length 305 mm Profile steel shears - L-profile at 90° 80 x 80 x 8 mm - L-profile at 45° 60 x 60 x 6 mm - Round steelØ 30 mm - Square steel 30 mm 3-point notching station - Flat steel 7mm - Notching depth 50mm - Notching width 40mm Punching station - Punching capacity 450 kN - Material thicknessØ 27 x 13 mm - Projection 175 mm incl. electric stop