cut used for sale

amount: 1 STK Dimensions (HxWxD): 280 x 190 x 190 mm diameter: 60 mm -> Bestcut gear hobbing cutter with HSS cutting material - Chip angle < 8° -> Module 16 F.20° 1gg Lks -> BP IV D-Stg < 5°40 -> 5° 40 Sp Stg 00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of Make: 2014 Operating hours approx.: 7,024 Control: iMSNC Work surface: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access through TeamViewer 15 m hose package Without suction 1 x Asper Win Basic nesting software + autom. Nesting on the machine control All-throttle = allows you to change the throttle to improve the quality of the cut and Adapt the cutting speed to the material.

Longitudinal cut-to-length line for the sheet metal industry 1,500 x 1.5 mm Belt width 1,500 mm Band thickness 0.4 -1.5 mm Longitudinal sections 3 Coil weight 3,000 kg# Speed 15 m/min. 3 unwinders Machine very well maintained, immediately ready for use, ex site

amount: 1 STK Dimensions (HxWxD): 300 x 190 x 190 mm diameter: 60 mm -> Gear hobbing cutter with HSS cutting material -> Module 18 -> L1 -> 5° 48` The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis ESAB Combirex DX3500 Oxy was manufactured in 2012. It features a cutting area of 2,700 x 12,950 mm and a maximum material thickness of 125 mm. The machine is equipped with an ESAB Precision Plasma M3 Gen 2 generator and a CNC Vision 51 control system. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex DX3500 Oxy plasma cutting machine we have for sale. Contact us for further details.

amount: 1 STK Dimensions (HxWxD): 300 x 190 x 190 mm diameter: 60 mm -> Gear hobbing cutter with HSS cutting material -> Module 18 20°1 gg Lks. -> HSS-C 70.251VF The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details.

amount: 1 STK Dimensions (HxWxD): 280 x 190 x 190 mm diameter: 60 mm HSS hob for high wear resistance The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Mazak Model: Super Turbo X510 MkII Year of Manufacture: 2007 Machine Type : Flatbed CO2 laser cutting machine CNC control: Mazatrol Preview Operating hours : 27.000 h Technical Specifications - Working area: 3050 x 1525 mm (5 ft x 10 ft) - X axis travel: 3235 mm - Y axis travel: 1545 mm - Z axis travel: 100 mm - Laser type: CO2 continuous wave - Laser power: 1800W - Maximum workpiece size: 3050 x 1525 x 22 mm - Maximum table load: 805 to 930 kg - Rapid traverse speed: 24 m/min (945 IPM) - Maximum cutting speed: 20 m/min - Machine weight: approximately 12,700 to 13,900 kg depending on configuration Maximum Cutting Thickness by Material - Mild steel: up to 22 mm - Stainless steel: up to 12 mm - Aluminium: up to 8 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

amount: 1 STK Dimensions (HxWxD): 300 x 190 x 190 mm diameter: 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC controlled cutting table for flat glass sheets 6000 x 3210 mm. With topiary and model catalogue. The glass panels are placed on top by means of swivelling arms. Power consumption 20 kW, dimensions 9200 x 4500 mm

Impressions=0 m, Condition= Very Good , Availability= 2026-03-11, Polar 78 X Cutting width 780 mm Air table 2x side table with airblower 2x extra knives complet machine

A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible.

Inv. Num. : 8985 Type: FL 400 3D Producer: Bystronic Created: 2020 Parameters: Operating hours: 11000 h Maximum cutting diameter: 406 mm Input/output length: 12000 mm

Fiber laser cutter OTINUS 1500x3000 3 kW with covered cutting head

This 3-axis PHENIX MD JET 1530 was manufactured in 2021. It features a spacious 1500 x 3000 mm table and a powerful 30HP hyperthermal pump capable of 4100 bar pressure. The machine has 1290 hours of operation and includes essential components such as a pump, tank, filter drain, and a salt softener. If you are looking to get high-quality waterjet cutting capabilities, consider the PHENIX MD JET 1530 machine we have for sale. Contact us for further details.

Cutting dimensions X/Y: 2000mm/3000mm, Z-axis stroke: 230mm, machine tolerance: +/-0.05mm/m, repeatability: +/-0.025mm/m, simultaneous movement: 56m/min, max. cutting speed: 30m/min, max. material thickness: 200mm, max. load capacity: 790kg/m², max. workpiece weight: 4740mm, max. clamping material thickness: 50mm, max. pump pressure: 3800bar, max. working pressure: 3600bar, machine weight: approx. 11300kg, working hours: 18111h. Documentation available. An on-site inspection is possible.

A Westema cutting table for precise cutting of soft, flexible materials is available. Table dimensions X/Y: 2250mm/1500mm, max. cutting height: 230mm, cutting speed: 16m/s, motor power: 1.1kW. Including quick clamping and grinding device. Documentation available. An on site inspection is possible.

Fiber laser cutting machine OTINUS 1500x3000 12 kW closed with exchange table

Fiber laser cutting machine for profiles and pipes 3kW 230x6000 mm

Adige LT5 Fiber with 6.5m bundler loader and 4.5m discharge equipped as follows: 4.5m finished parts collection table Rear scrap conveyor 1KW IPG fiber laser Chiller Extractor Weld seam detector

suitable for tomatoes and other soft fruit and vegetable varieties, sawtooth-shaped cutting blades that move back and forth at high speeds, low cutting pressure, max. product dimensions: 100 x 70 mm, existing cutting set: 4.76 mm cutting thickness, WILLICH STORAGE.

Rondo Rondolino ZGM635. A Dough Processing Machine Pastry Plant - Manufacturer: Rondo - Type: ZGM635. A + SFT370A - Compact pastry line with cutting station + guillotine - Ideally suited for small bakery - with croissant cutting roller - With mobile table for croissant wrapping machines / croissant wrapping machines - Belt width 64cm External dimensions: Length 380cm Width 110cm Height 186cm

Tenon cutting and slitting machine No further data known

An ultrasonic cutting machine is offered. 180mm full-wave titanium blade, cutting shapes: rectangular, triangular, diamond-shaped, round products, sheet dimensions X/Y: min. 300mm/200mm max. 600mm/400mm, round products: min. 220mm max. 260mm, cutting height max.: 120mm, production capacity: approx. 120sheets/h, integrated cleaning station and drying function. Inspection possible by appointment.

Herlitzius A2000 continuous bread slicer - Continuous bread slicer - Manufacturer: Herlitzius - Type: A2000 - Adjustable cutting width Technical data: - Voltage: 400 volts - Control voltage: 24 volts - Connected load: 2.5 kW - 50Hz

A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026.

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW spindle turning speed - stepless: 30-3000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 430 mm turning diameter over slide rest: 230 mm turning length: 1000 mm centre height: 215 mm centre distance: 1000 mm spindle bore: 56 mm spindle turning speed range: 19 - 2000 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,9 t dimensions of machine L x W x H: 2,78 x 1,25 x 1,40 m Accessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2017. Documentation available. An on-site inspection is possible.

AHI Grain Cutter Size 3, 600 mm roller length, Power 4 kw, rollers ø 147,4 Milled grinding segment Test run carried out in our specialist workshop

STM 1530 PremiumCut 3D 12° Hours: 3200 Year of manufacture: 2018 Working area: 3002 x 1502 x 300 mm Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Including professional dismantling, transport and commissioning within Germany

used Spewe mineral wool cutter, universal guide unit for many Possible applications, including the following equipment: - Short-stroke parallelogram - Telescopic cut-out post - Insulation thickness preset - Rear saw blade forced guide - Cutting guide swivels from -5 to +45 degrees - Without guide slide - Without insulation saw Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Cutting length: 1270/1100 mm Cutting depth at 90 degrees: 80 - 305 mm Cutting depth at 45 degrees: 180 mm Machine weight: 24 kg

Laser Cutting Machine Manufacturer: Eurolaser Type: LCS XL-1600 Year of Make: 2010 Power: 200 W Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous area of application: Cutting acrylic glass Laser source was renewed 5 years ago

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

Used parts: Milling shaft / 2-speed gearbox SelectaTilth / Final drive: gears, chain, side cover, cork seal etc.

Key data: 1550 mm, 3 mm, 120 1/min

Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm

TECHNICAL DATA: Machine for making pallets Usable work surface: 1200 x 1200 mm Motorized loading roller conveyor: 4500 mm Motorized unloading conveyor: 2500 mm + 3000 mm (free-running) Installed power (cutting unit): 9 kW EQUIPPED WITH: Package Holder 01 Lower conveyor belt for wood waste: 8000 x 800 mm + Tiltable end ramp: 2500 mm

used bread slicer WABÄMA SIGNA 460.10Cut bread slicer Bread slicer Automatic 230 V mobileManufacturer: WabämaType: SIGNA Classic ELEKTRONIK 460.103,20 AÂ Â 750 W 230 VSchnittbrotgatter with crumb drawerAutomaticMembrane keyboardRobust machineSpeedsOil controlCutting thickness: 10 mm / Cutting width: approx. 42 cmDimensions:Width: approx. 58 cmDepth: approx. 80 cmHeight: approx. 112 cmCutting width: approx. 42 cmCutting thickness: 8 mmDetails see pictures

Bread slicer Schickart TS 38Product descriptionManufacturer: SchickartType: TS 38Condition: used, functional, bakery conditionMaterial: stainless steelOn castors, mobilePower supply: 400 Volt / 0.75 kWDhe Schickart TS 38 is a bread slicer manufactured by the company Schickart. By using a bread slicer such as the Schickart TS 38, working time can be reduced and productivity increased. Details see pictures

Bread slicer Herlitzius ROTO-SHOPÂ Manufacturer : Herlitzius Type : ROTO-SHOP Year of construction : 2000 Circular knife Current type : 3-N-PE 50Hz Operating voltage : 400 Volt stainless steel mobile Details see pictures

Circular knife Bread slicer Treif Diskus  Product description Manufacturer: Treif Maschinenbau GmbH Model: Diskus 400 Material: stainless steel Condition: used, functional, bakery condition - please clean thoroughly before use Year of construction: 2010 Cutting width adjustable With circular knife / round knife Mobile, on castors  Details see pictures

Manufacturer : MHS Model : BM 45 N mobile 400 Volt Cutting width 10mm Baker condition Details see picture

used Treif Diskus SB AL 7 bread slicer year 2013 â Product description âœ" Manufacturer: TREIF Maschinenbau GmbH âœ" Mod.: Diskus SB AL 7 âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of manufacture: 2013 âœ" Cutting width adjustable âœ" for all types of bread âœ" with circular knife âœ" on rollers, mobile âœ" Type of current: 3-N-PE / 50 Hz âœ" Operating voltage: 400 V âœ" Control voltage: 24 V âœ" Rated current: 2.25 A âœ" Fuse: 10 A âœ" External dimensions: W.: 94 cm, D.: 75 cm, H.: 120 cm See pictures for details. Is the right item not listed? We have a

used bread slicer TREIF Diskus SB AL5 year 2011 â Product description âœ" Manufacturer: TREIF Maschinenbau GmbH âœ" Mod.: Diskus SB AL5 âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of construction: 2011 âœ" Cutting width adjustable âœ" for all types of bread âœ" with circular knife âœ" on rollers, mobile âœ" Type of current: 3-N-PE / 50 Hz âœ" Operating voltage: 400 V âœ" Control voltage: 24 V âœ" Rated current: 2.25 A âœ" Auxiliary fuse: 10 A âœ" External dimensions: W.: 94.5 cm, D.: 69 cm, H.: 118 cm See pictures for details. Is the right item not listed? We have a

used TREIF Diskus bread slicer SB AL5 year 2012 â Product description âœ" Manufacturer: TREIF Maschinenbau GmbH âœ" Mod.: Diskus SB AL5 âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of manufacture: 2012 âœ" Cutting width adjustable âœ" for all types of bread âœ" with circular knife âœ" on rollers, mobile âœ" Type of current: 3-N-PE / 50 Hz âœ" Operating voltage: 400 V âœ" Control voltage: 24 V âœ" Rated current: 2.25 A âœ" Auxiliary fuse: 10 A âœ" External dimensions: W.: 94.5 cm, D.: 69 cm, H.: 118 cm See pictures for details. Is the right item not listed? We have a

Bread slicer TREIF Diskus SB AL5 Year 2010 â Product description âœ" Manufacturer: TREIF Maschinenbau GmbH âœ" Mod.: Diskus SB AL5 âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of manufacture: 2010 âœ" Cutting width adjustable âœ" for all types of bread âœ" with circular knife âœ" on rollers, mobile âœ" Type of current: 3-N-PE / 50 Hz âœ" Operating voltage: 400 V âœ" Control voltage: 24 V âœ" Rated current: 2.25 A âœ" Auxiliary fuse: 10 A âœ" External dimensions: W.: 94.5 cm, D.: 69 cm, H.: 118 cm See pictures for details. Is the right item not listed? We have a wide range of