cut used for sale

K+G Wetter Cutter 90 liters SM 90 STL Type 261

Seydelmann K90-DC8 Bowl cutter Serial: 912371 Stainless bowl chopper, 90l capacity, variable speed and timer controls, six blade assembly, with discharge arm, 3Ph

Cutter Seydelmann K 60 U, Machine completely made of stainless steel, 2 speeds, mixing gears, cutter head wrenches, external control box and display, built in 1996, Dimensions LxWxH approx. 160x110x120cm, weight approx. 888kg, good used condition, fully functional, runs smoothly

WaterJet MicroStep Aqua Cut 3001.20 was built in 2005. The waterjet cutting machine allows you to cut sheet metal with a maximum thickness of 120 mm on a table size (L x W) 3300 x 2200 mm. The machine portal is equipped with two heads for water cutting, one of which is rotating. The waterjet is controlled by the MSNC 500 CNC controller. The MICROSTEP Aqua Cut 3001.20 WWr + 4001.20P water cutter is offered with extensive equipment, including: Streamline SL-V 50S Plus oil cooler, ATLAS COPCO FX1 dryer and KKT KRAUS OLB7 cooling unit. The plasma source and the additional head also enable plasma cutting after installing an additional table.

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

Complete Log Cut-off Saw Manufactured by Raute

For sale wire EDM fanuc tape cut - w2 Year 1989 Kept and running well available immediately for viewing

Cut to length line Bronx CTL 1-5mm 400-1500 15 MT Material: CR, HR, P&O GALVA Thick (mm): 1,0 – 5.0 Width (mm): 400 – 1500 Weight max: 20 MT Coil Int. Diam.: 508/610/700 Coil Ext. Diam max (mm): 2000 Length Produced (mm): 500 – 4000

Cut to length line Redman 2000mm x 13mm x 20 ton Make: Redman (UK) Material Width: 600mm – 2000mm Material Thickness: 6mm – 13mm Coil Weight: 20 ton Coil ID: 460mm – 760mm Coil OD: 1800mm Max Speed: 20 meters per minute Production Mode: Stop / Start Direction: R-L Entry V-Type Coil Car Double Mandrel Uncoiler Hold-Down Roll Hydraulic Peeling Table Driven Pinch Rolls Pinch Rolls Diameter: 330mm Corrective 4-Hi Leveler Nine (9) Working Rolls Work Rolls Diameter: 140mm Hydraulic Work Rolls Adjustment Up and Down Back Up Flights 120HP DC Motor Drive Mechanical Shear with Motor Belt Conveyor with Measuring Head Drop Type Stacker with End Conveyors Electrics, Hydraulics, Controls

Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

2000mm x 8mm x 30ton FIMI CTL Line Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to provide high top straightening quality and flying shear to make cutting process perfect Manufacturer: FIMI – ITALY Year: 1990 Material: CR-GZR-RP-RKK Yield Strength: 180-400 Mpa Tensile Strength: 220-550 Mpa Coil Width: 800-2000mm Coil Thickness: 1-8mm Coil Weight: 30 Ton Line Speed: 1-25m/min Direction: Left to Right Sheet Tolerance/Size: Length Tolerance: +/- 1 mm Diagonal Tolerance: 0.1% x Sheet width Sheet Width: 800 – 2000 mm Sheet Length: 3000 – 12000 mm Electric AC: 380V /50 Hz / 3 phase AC Control Voltage: 110 V Control Voltage: 24 V Double Mandrel Uncoiler Sliding Base Powered Mandrel Expansion Powered ...

Wohlenberg 92 Cut Tec Year of construction: 2002 Cutter version with monitor Air table, 2x side tables, spare blades Very good condition! At call!

Equipment consists out of: 1 - Three decoilers 2 - Sheetholder with three levels 3 - Fasti straightening unit 4 - Fasti shear Transversal cut to length line / Querteilanlage / installation de coupe en longueur

Complete cutting system consisting of: - Wohlenberg Cut-Tec 137 - Baumann automatic shaker BOD / L - Baumann unloader BA 3 N Year of construction: 2002 Display has been renewed. Accessories: several spare knives, cutting strips, documentation, etc. The machine was used in a single-shift operation, is ready for use and can be tested on site. Price ex works. "Sold only to entrepreneurs. The object of purchase is sold to the exclusion of any warranty"

Phenix RS LT CUT 2040 plasma cutting machine With POWERMAX 125 GENERATOR Hypertherm Plasma Torch - Set Harnesses, Hypertherm cables and voltage divider board - Altitude control feeler and Hypertherm anti-collision - Mechanically welded machine frame, rectified on machining center - Machine frame with 4 PANASONIC Motors / Brushless encoder 15003000 Double motorization in X - Automatic game catch-up between rack and pinion - Precision gearbox, guides and racks - Smoke suction trays compartmentalized - Removable slag collection trays by the side - Electrical cabinet - PHENIX Numerical Control TECHNOLOGY - Industrial PC -Laser pointer - 3 axis wired joystick -Pneumatic dot peen marker - Central suction and filtration of smoke EASY 3 7.5 KW -Pre separator (spark trap)

Phénix RS MD CUT 2040 plasma cutting machine Following the closure of our manufacturing plant, we are selling our large Plasma table: - 4 Panasonic or HDT brushless motors - Machined frame and beam - Rack and pinion transmission and linear guide - Quality precision reducer - X-axis dual motor drive - Automatic control of the height of the THC torch - Anti-collision system included - Removable steel slag collection tray, exiting on the side of the machine - Removable grating blades mounted on a removable frame - The table is equipped with an integrated fume extraction tray with pneumatic partitioning - Edges facilitating the positioning of the sheets - Grids for collecting small parts on the cutting surface - XPR 170 plasma generator

Type: MATRA TAPE CUT W2 Parameters: 500 mm, 350 mm Manufacturer: Fanuc Year of production / SO / GO: 1991 / - / - Description: The machine is in good technical condition. X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Voltage: 200V AC + -10%; three-phase; 50 / 60Hz Cooling water temperature: 10-25 ° C Water flow: 15-35 liters / minute Sold including: 1st filter SW37 D340xd46xH450mm - 3pcs 2.Savah RVH600 - anti-rusting workpiece - 5 liters 3.Eleion plus - resin to reduce the conductivity of working water - 50 liter barrel - full up to 3/4 volume 4. Various small spare parts - see. photo- Dimensions L x W x H: 3500 x 2400 x 2400 mm Weight: 2300kg Upon agreement, the possibility of a tour in progress.

Key data: 320 mm, 250 mm, 160 mm

Inv. Num. : 7379 Type: H-CUT 203M20 Producer: HITACHI Created: 1995 Parameters: Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm

Cut-to-length line Herr Voss – Wysong 72″ x .135″ x 40,000Lb (A3788) Make: Herr Voss – Wysong Material: CR, HR, Stainless, Aluminum Material Width: 12″ – 72″ Material Thickness: .030″ – .135″ (-030 – .187″ 60″) Weight Capacity: 40,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Direction: L-R Speed: 200 feet per minute Entry L-Type Coil Car Make: Sauer Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Make: Wean Powered Hold Down Roll Sliding Base Pneumatic Brake Feed Up Motor Hydraulic Peeling Table Driven Entry Pinch Rolls Herr Voss 6-Hi Precision Leveler Year New: 1999 Model: VKL-84/2.187/19/7/6-Hi Work Rolls Width: 84″ Work Rolls Diameter: 2.187″ Number of Work Rolls: 19 Motor: 150HP DC Drive Inc Jet Coder Adjustable Hump Table Size: 75″ x 12′ PVC Paper with Static Charge Bar ...

Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco 60" x .187" x 50,000Lbs CTL Line Excellent conditions

Preliminary operating machine for year QIV/2013, 100 operating hours Basic 1530 Basic Waterjet Processing Centre 1530 Working area: X-axis 3050 mm Y-axis 1550 mm Z-axis 150 mm The abrasive water jet cutting requires the addition of a supplied abrasive cutting head. This reduces the distance between cutting head and factory tool. drives: drive side, reverse play-free linear drives in X and Y are used with stoeration-free CAN-BUS communication as well as guide well-known manufacturer. This This means maintenance and wear-free operation of the system and the long -term Drive unit X-axis is mounted on granite. Individual linear units are protected by folding beam and covers in addition to the ingress of dust and water. Accuracy: 0.05 mm / Working area Max.Speed: 15,000 mm/min Z axis German-speaking operator software for machine control Abrassiv de-sludge plant ...

; in stock

Technische Daten: - Schnitthöhe 125 x 125 mm                       100 x 250 mm - Tischabmessung 660 x 700 mm - Sägeblatt FI 450 mm - Motor 5,5 kW / 400 V - Drehzahl 3600 Upm - Schnittgeschwindigkeit is zu 45 Takte/min. - Druckluftanschluss 8 bar - Absaugstutzen FI 120 mm - Sicherheits Zweihandbedienung - CE Konformität - inklusive 1,5 m Rollebahn links und rechts - Abmessungen L=940,B=850, H=1350 mm - Gewicht 410 kg

Technische Daten: - Schnitthöhe 200 x 200 mm - Tischabmessung 1150 x 660 mm - Sägeblatt FI 600 mm - Motor 10 kW / 400 V - Drehzahl 2400 Upm - Schnittgeschwindigkeit is zu 40 Takte/min. - Druckluftanschluss 8 bar - Absaugstutzen FI 120 mm - Sicherheits Zweihandbedienung - CE Konformität - inklusive 1,5 m Rollebahn links und rechts - Abmessungen L=1360,B=900, H=1450 mm - Gewicht 560 kg

AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

Glue binder cross saw Width 3200 mm (saw path) Saw blade diameter 900x50 Little worked !

Bale Cutter Guillotine Blade is approx. 35inch wide

Max.width of cutting: 530 mm Temperature of meat block: up to -20 C Control panel mounted on the machine Instaled power: 4 KW Power supply: 380 V, 50 Hz Dimensions of machines in cm: Width: 100 Lenght: 165 Height: 195 Delivery time: 30 working days after advanced payment

Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment

Machine is in very good condition X : 600 mm Y : 400 mm Z : 350 mm

Fogg & Young Bale Cutter

for frozen meat blocks

Unit for precision cutting Make: IMA

Connected load: 1.5kW, including documentation.

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 9.2 kVA Rated current: 14 A Open-circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 9.2 kVA Rated current: 14 A Open-circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 9.2 kVA Rated current: 14 A Open-circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 9.2 kVA Rated current: 14 A Open-circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug