cut used for sale

Working hours laser on: 28.313 (15.05.2024) h Working hours beam on: 8.421 (15.05.2024) h Laser power: 6000 Watt Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW

Working hours laser on: 57785 (23.03.2022) h Working hours beam on: 40160 (23.03.2022) h Laser power: 5000 Watt Control: Siemens 840 D Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 11100 mm Width: 4600 mm Height: 2400 mm Machine weight: 12000 kg Electrical connected load: 105 kVA

CONTROLS   PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of levell ...

Cross-cut saw BERG & SCHMIDT Junior 275 - used-underframe, driving device ---------- Technical data ---------- cutting height: 60 mm, voltage: 230 V

Complete electronic boards(cards) for Schneider 115 mc v built 1990. Can ship world wide. Card numbers still available: 4141 APS-13010 MV40-5110 KV 40-30112APS-13210 MV 40-5020 4110 MV40-3040 MV40 - 30 20 MV40-3331 APS 13040-10 4131 4120 The mentioned cards were taken out of a fully operational cutter.

- Programm - air table - side table left and right - spare knife

Inv. Num. : 8273 Type: Bylas 4020-2 Producer: Bystronic Created: 1994 Parameters: Control system: Bystronic CNC 90 Maximum power: 3.5 kW Work table length: 4000 mm Work table width: 2000 mm Maximum sheet thickness when cutting (stainless steel): 0.2-6 mm Maximum sheet thickness when cutting (aluminum): 1-6 mm Maximum sheet metal cutting thickness (steel): 0.2-12 mm Maximum sheet metal cutting thickness (copper/brass): 1-4 mm Maximum sheet metal cutting thickness (galvanized): 0.2-8 mm Maximum woodcut thickness: 50 mm Maximum cutting thickness for plastic: 50 mm Equipment: Replacement resonator (2kW) Spares

Granulator - Wanner C17.26sv / Like new Year of construction: 12/2020 Description: Slow-moving granulator with gearbox Power: 3 kW 2 stator blades, 12 rotor blades, the sieve - interchangeable Hopper inlet: 280x250 mm Grinding chamber opening: 240x170 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - Wanner D25.38c / Like new (2 pcs.) Year of manufacture: 02/2019 Description: Slow-moving granulator with gearbox Power: 4 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Hopper inlet: 370x330 mm Grinding chamber opening: 385x190 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Manufacturer: Düspohl, Type: DTS 350 E, Year: 1997, kW Leistung Stück: 4, Through running hight mm: 125, Working width mm: 330, Feeding speed min-max m/min: 100, Feeding speed continous adjustable: yes, Year :1997

Manufacturer: Paul, Year: 1999, Type: Strangsäge, Control: NCK 3 , Program: yes, Cutting depth mm: 19 X 600, Working hight mm: 16-19, Positioning accuracy mm: 0,3, Feeding speed max m/min: 60, kW output saw motor: 5,9, wood lenght max mm: 3000, Saw Blade Diameter mm: 530, Year :1999

Bread slicer Hartmann SL30 Slicer - Continuous bread slicer - Hartmann Slicer SL30 - Voltage: 380 volts - Rated current: 16A - Power consumption: 5kW

Manufacturer: Hüllhorst, Year: 1995, Type: Kranzprofilsäge, Control: Ferrocontroll, Cutting depth mm: 250, Working hight mm: 120, Feeding speed max m/min: 60, Feeding speed continous adjustable: yes, Slewing range degrees: +45-45, Work piece length max mm: 4500, Kw Leistung Sägemotor: ca.4, Loading stations: yes, Waste conveyor: no, Saw Blade Diameter mm: 500, Length to slide in mm: 5000, Drill head vertical controlled: yes, Spindles: 8, Drill head vertical controlled spindles: yes, Collet chuck: yes, Optimisation: yes, Maschine vorführbereit: yes, Year :1995

Manufacturer: Hüllhorst, Year: ca. 1970, Control: hand, Width adjustment manually: yes, Action controlled: no, Cutting width max mm: 1200, Sägeblätter schwenkbar bis ° : no, Cutting hight max mm: ca.100, Cutting lenght max mm: 140, rotations controlled: 6000, Saw blade diameter max mm: 450, Main engine kW: ca.4, Year :ca. 1970

BYSTRONIC ByStar 4020 laser cutting machine was built in 2011 by the renowned Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 25 mm. Materials made of e.g. steel or aluminium are machined using a laser beam with a maximum power of 6 kW and a thickness of just a few μm. It ensures extremely precise workpiece edges, which are characterised by unprecedented smoothness and absence of irregularities. The offered ByStar 4020 laser cutting machine is also extremely easy to operate. The process parameters are programmed in the intuitive ByVision CNC control, which allows the creation of advanced machining programmes in just a few steps. All this makes the BYSTRONIC laser the perfect choice for any industrial plant. Technical specification of the BYSTRONIC ByStar 402 ...

Manufacturer: Hüllhorst, Year: 1995, Type: HGV, Control: ferro, Cutting depth mm: 50, Working hight mm: 80, Feeding speed max m/min: 60, Feeding speed continous adjustable: yes, Slewing range degrees: +-60, Work piece length max mm: 4200, Loading stations: yes, Length to slide in mm: 4000, Drill head vertical controlled spindles: 4, Tool exchange places: yes, Collet chuck: yes, Optimisation: 1, Required space L x W x H mm: 6, Compressed air bar: 3000, Maschine mit automatischem Einlegemagazin die Teile werden über eine Spannzange übernommen und der Säge zugeführt, Year :1995

Manufacturer: Paul, Bauyeshr : 1989, Type: 12 MKE, Steuerung : Maxi X 3, Cutting depth mm: 44 - 150, Working hight mm: 19 - 75, Schnittgeschwindigkeit Frequenzgeregelt: yes, Work piece length max mm: 6500, Kw Leistung Sägemotor: 7,5, wood lenght max mm: 3000, Aufgabestationen: yes, Abfallförderband: yes, Saw Blade Diameter mm: 550, Optimisation: yes, Year :1989

TRUMPF TruLaser 3060 laser cutting machine was built in 2007 in Germany by TRUMPF Werkzeugmaschinen Teningen GmbH. The machine, distinguished by its excellent precision and high productivity, is used for machining workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a power of 4 kW and a thickness of only a few μm, which is generated by a reliable laser source with the highest energy efficiency. The automatic pallet exchange system, in turn, allows simultaneous loading and unloading during the cutting process, reducing machine downtime to a minimum. The offered TruLaser 3060 laser cutting machine also features a number of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. This includes, for example, the ControlLine distance measuring system, which ...

BACCI FC 8 2500 linear milling machine Working length 2500mm Working width 200mm Working height 180mm Number of units 8 Milling 7.5kw Milling 7.5kw Milling 5.5kw Milling 5.5kw Grinding/milling 4.5/3.3kw Grinding/milling 4.5/3.3kw Sanding 3kw Sanding 3kw Hydraulic feed Working speed 0-15m/min Return speed 50-100m/min Year of production 2004 CE Certified Machine weight 5100kg

45 cycles per minute with chamfering 60 cycles per minute without chamfering Maximum cutting length 700 mm, width 400 mm

Specifications: ✅ Brand: Previero ✅ Model No.: MU-408 ✅ Cutting chamber: 800 x 380 mm ✅ Rotor: Closed, inclined cut, water-cooled ✅ Engine: 75 kW (100 hp) ✅ Ideal for continuous work and high-density materials Common Applications: Shredding of technical plastics, purges, thick sheet, pipe, large parts Integration into recycling or extrusion lines Suitable for materials such as PP, PE, PET, PVC, ABS, PA, among others High production capacity with excellent crushing quality

Laksa KU130 Bowl cutter Stainless bowl cutter, 130L capacity bowl, six blade assembly, with discharge arm, mitsubishi touch screen hmi controls, modified to run on an AC motor with Allen Bradley Powerflex753 inverter drive, with manual, 3Ph

Multi-wire cutter with slat feed and chunk cutter 13 stones in NF format with three-sided chamfering. Batten length 1340 mm

Max. cone distance: 230 mm Number of teeth: 5-150 Diameter of taper hole at large end: 100 mm Taper: 1:19,7 Depth of taper: 150 mm Diameter of hole through spindle: 78 mm Diameter of spindle nose: 140 mm Max. offset above center: 114 mm Max. offset below center: 114 mm Max. distance from machine center to nose of spindle: 343 mm Min. distance from machine center to nose of spindle: 63 mm Cutter speeds: 17-115 rpm Feed (sec/tooth): 9-80 sec Floor space: 1900x2900 mm Net weight: 10750 kg

Manufacturer: Amada Model: FLC3015AJ-C2R Year of Manufacture: 2018 Working Area: 3070 x 1550 mm 2000 W laser Find more here - / Contact us at -

:::TECHNICAL SPECIFICATIONS::: CNC Model: ECS CNC Version: 4802 Self-centering diameter: 1500mm Turning diameter on the bench: 2000mm Turning diameter on the carriage: 1360mm Turning length: 4000mm Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 4 Number of fixed tool positions for the first turret: 4 Tailstock: yes Positioning: Automatic Chip conveyor: belt Machine equipment: Large steady rest up to 1300 mm small bezel up to 600mm Large boring bar diameter 150 by 2000 mm long

Manufacturer: Trumpf Model: Trulaser 5060 Type of Machine: CO₂ Laser Cutting Machine Technical Specifications: Working Area: - X-axis: 6000 mm - Y-axis: 2000 mm - Z-axis: 115 mm Max. Workpiece Weight: 2800 kg Speed: - Axis-parallel: 200 m/min - Simultaneous (X and Y): approx. 300 m/min Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ±0.1 mm - Average position scatter: ±0.03 mm CNC Control: - Model: Siemens Sinumerik 840D - RAM: 64 MB - Monitor: 12" TFT - Program memory: 500 MB for NC programs - Disk Drive: 3.5" - OS Platform: Windows NT Find more here - / Contact us at -

We are selling here a frozen meat slicer from the manufacturer FMS GmbH in a very good used and functional condition. The machine runs on 400 volts, completely stainless steel, rollable, passage 38 cm wide, for chopping frozen meat, workshop tested, dimensions W/D/H 70/95/90 cm, others on request.

ECKERT Opal WaterJet COMBO waterjet cutting machine was built in 2011 in Poland by ECKERT AS Sp. z o.o. The machine, designed for precision machining of workpieces with a maximum thickness of 250 mm, combines all the benefits of plasma and waterjet cutting. The machining process is performed on a robust, large work table by means of a powerful cutting head. All table travel components are protected by bellows guards to ensure uninterrupted operation for many years of use. The design made of high-quality closed steel profiles, in turn, guarantees the highest stability during even the most demanding challenges. The ECKERT Opal COMBO WaterJet is offered with, among others, CAD/CAM software and a 37 kW high-pressure pump. Technical specifications of the ECKERT Opal WaterJet COMBO water cutting machine - maximum workpiece thickness (water machining): 250 mm - feed rate: 25000 mm/min - w ...

machine fully refurbished - Polar maintenance program E-Electronic computer cutting programmes Fully graphics-able colour display 210x160mm Infra-Red light guards two hand safety cutting back table guarding all relevant safety installations optical cutting line indication air table cutting table - stainless steel slot cover at back table side tables (2) -cast iron adjustable hydraulic pressing 2 knives, documentation, el. diagrams, tooling Gross weight 1900kg

Find more here - / Contact us at -

Find more here - / Contact us at -

Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - / Contact us at -

M. No.: 7361205 Format (cm): 78 Equipment / Additional information: Safety barriers, side tables, air table, 1x reserve knife

Chain milling machine Festo Lock box milling machine Type: PP Machine No. 80816 For wall mounting With door cover With many chains and swords Pneumatic workholding Slot width 8-16 mm Milling depth 175 mm Slot length 30 – 300 mm Clamping height 1000 mm Table adjustment longitudinal/transverse 250/70 mm Maximum wood thickness 230 mm Motor power approx. 2.2 kW Weight with pallet 180 kg Shipping dimensions 1200 mm x 800 mm x H 1100 mm

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Used-refurbished machine max. 1800 cuts/minute 8-48mm product thickness 2mm cutting accuracy External dimensions (HxWxD): 850x850x1500 mm

Max. workpiece length ... 3000mm Max. workpiece width ... 1500mm Max. sheet thickness... 12mm Laser power... 2000W Total power requirement ... 71kVA Machine weight ... 11500kg L x W x H ... 9800x5300x2000mm The machine is in good condition, possible to test under power.

2021 Kraft VPS-100/2500 Cardboard cutting machine VPS100 from Kraft The machine was built in 2021 and was used very little. VPS100/2500 Basic machine plus - 10 x tool for longitudinal machining - 1 x tool for cross processing - 2 x rubberized rollers as counter-cut or transport medium - 1 x upper pressure controlled in segments above the feed roller - 1 x control cabinet decoupled and integrated in the basic machine Additional: - Freestanding control panel - Automatic outfeed device - Automatic carton changer with 6 chutes (4 with side-by-side function) - Mguard router - Wireless 1D code scanner incl. interface - 3 free Kraft Boxdesigner licenses + 1 license on the machine Description With the VPS100 automatic box cutting machine you can finally produce the right packaging, at the right time, in the right quantity. Reduce your cardboard consumption to what is necessary ...

Usable work area with cutting head: 1000 x 1200 mm Usable work area with milling head: 950 x 1150 mm Cutting/milling speed: 10 mm/sec - 500 mm/sec Acceleration: up to 5 m/sec2 Mechanical/addressable resolution: 0.01 mm Static repeatability: 0.02 mm Software data format: ASCII/HPGL RS-232 interface or RS-232/USB converter Plotter input buffer: 16 kilobytes Power requirements: 230 volts +-10% / 50-60 Hz / 450 VA Software: CoCut trial version can be downloaded for free. Converter is missing to be able to mill.

920 x 920 ED - Program Control Colour monitor Air table Formica side tables with air Spare blade

SK150 Underused 1500 kg/h capacity -3ºC to -28ºC raw material temperature pneumatic product dispenser Electrical power: 4 kW Electrical connection: 400V, 3F, 50Hz Power consumption: 9,2 A S. air pressure: 4-6 bar Hydraulic pressure: 80 bar Oil capacity: 80 L Cutting force: 25.000 N Dimensions Depth: 1420 mm Width: 996 mm Height: 1635-1700 mm Weight: 580 kg

Rego Herlitzius Kobold Bread Slicer Bread Slicer 10mm 230V - Creel machine - on castors - with lubrication - Cutting width 10mm - for max. 42cm loaves of bread Specifications: - Manufacturer: HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61 cm Depth: approx. 60 cm Height: approx. 115 cm

WEMTECH Dynamic Torch 150/300 plasma cutting machine was built in 2022 in Poland by WEMTECH CNC. The machine, designed for precision machining of workpieces, is distinguished by the use of modern technical solutions that guarantee excellent production performance for many years of use. The machining process is performed on a table with a large cutting area which is filled with water or other coolant. The use of this solution eliminates the need to undertake any further secondary processes, such as grinding. The work table also has sectional exhaust extraction. The individual sections of the extraction table are controlled by pneumatic cylinders. The axes are driven by a stepper motor with a gear wheel mounted on a cushioned sled. This drive effectively eliminates backlash, as well as ensuring the achievement of high acceleration and working speed. The plasma torch, on the other hand,  ...

2000 X 2-6 MM cut-to-length line was built in 2018. The line was specially configured for machining stainless steel in a start-stop system with a stationary guillotine and sheet pick-up from the discharge conveyor. Maximum production efficiency is ensured by the use of a special system that packs the sheets into bundles after cutting. Other proven solutions, in turn, guarantee many years of trouble-free operation of the line. The offered cut-to-length line has undergone a general overhaul and is in perfect condition. All components meet the safety standards required by the applicable directives, as confirmed by the CE declaration. The 2000 X 2-6 MM cut-to-length line is fully complete and consists of the following components: – scissor lift table – sheet metal decoiler 7.5 t – infeed and guide system – sheet metal straightening unit – double-side foiling system – gui ...

LANSUN CNC XG32.05 tube plasma cutting machine was built in China by Wuhan Lan-sun Technology Co., Ltd. The machine, equipped with a reliable plasma source with the highest energy efficiency, is used for precision 3D cutting of tubes with a maximum diameter of 190 mm. The machining process is performed by a torch centrally positioned above the tube to be cut. The rotating head with holder, in turn, guarantees perpendicularity of the cut in relation to the tube axis. The offered LANSUN CNC plasma tube cutting machine is new, unused. Technical specifications of the LANSUN CNC XG32.05 tube cutting machine - maximum tube diameter: 190 mm - maximum tube thickness: 40 mm - inverter plasma cutter: HUAYUAN WELDER LGK-100IGBT quality cutting thickness (steel): 0.3-22 mm rated input power: 17.8 kVA rated input voltage: 3x 380 V; 50 Hz rated output current: 100 A rated output voltage: 12 ...

Key data: 3000 , 1500 , 15000

Machine options included: - Eagle AC - MYEDROP - drag & drop option - MYEBOOST - very fast cutting up to 12-15mm - MYECAT - improved cutting quality of big thicknesses; possibility to cut rusty metal sheets - MYEMIX 1.0 - no burr cutting of mild steel and aluminium up to 12mm by automatically changing between 3 gases. - MYESPOT - Super fast sheet measurement system CraneMasterExtended S-DOWN Automation options included: - Separation of sheets - Sheet thickness measurement - Anti collision system - Automatic Machine combs cleaning system - Each suction cup control - Double number of suctions cups

Technical specifications: Machine: Eagle iNspire 1530 30kW Laser source: Model YLS-30000 CW Workspace: 1500mm x 3000mm Year of production: 2024 Laser power: 30 000W Head: eVa v11.020 2.0 Additional options: 1. PRODUCTION KIT - The production kit is prepared according to the machine series, laser power and set of consumables necessary to start production immediately. 2. PREPARING MACHINE FOR AUTOMATION - It allows for the possibility of an already installed fiber laser cutting machine to be fully integrated with an automation system in the future. 3. ADDITIONAL PULPIT - The operator doesn’t have to go in front of the machine to control the cutting process or run the program. On the additional control panel, the whole cutting process is visible thanks to the camera installed inside the machine. 4. EAGLE EYE - The function allows you to monitor all the activities taking pla ...