cut used for sale

Carpentry cross-cut saw Gama 65S Cutting height 245 mm SIDE TABLES WITH ALUMINIUM PROFILES OF 3 M EACH LEFT AND RIGHT

SPECIFICATIONS: 2 saw blades Ø 250 mm (2.2 Kw each) 2 saw blades Ø 350 mm (2.2 Kw each) Speed: 3800 rpm Machinable length: min. 200 mm-max. 1200 mm With chip transport carpet

M. No.: 3/60 388 Format (cm): 80 Equipment / Additional information: 1xreserve knife Condition: Very good condition / New controller

Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available

we have two Polar loaders model TR150BL-3 1) Year 2001 with stand-alone gripper arm - BM5125 - comes from a P137X 2) Bj 2008 model - BM5126 - comes from a P155X cutting machine For the use of the devices, a rear table feeding of the high-speed cutter is a prerequisite

Hydr . Flat profile and bar steel shears with notching device and hole punching Specifications: - Flat steel shears cut up to 375 x 10 mm - 220 x 20 mm - Profile steel shears - cuts L-steel at 90° to 130 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device - with square notching device 100 x 42 x 10 mm - Hole punch - punching force 600 KN - with stop table - Projection 300 mm - perforated in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions

EAGLE EVISION 1530 F2.0 AF FIBER laser, manufactured in 2013 in Poland with its excellent rigidity and high stability, achieves the highest precision and quality in machining stainless steel, structural steel and aluminium sheets. The EVISION 1530 F2.0 AF laser cutting machine uses a high-quality 2 kW laser beam, which makes laser cutting smooth and trouble-free. The edges of the machined sheet metal are distinguished by their extraordinary smoothness, and the workpieces themselves are free of any irregularities. The large work table with a length of 3000 mm and a width of 1500 mm, together with the state-of-the-art EAGLE CNC control, make the machine capable of handling even the most demanding machining operations. The fibre laser weighs approximately 20 tonnes. Technical specifications of the EAGLE EVISION 1530 F2.0 AF laser - laser beam power: 2 kW (2000 W) - CNC control: EAGLE  ...

Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg

Compressive force max.: 55 kN Projection: 175 mm Punching stroke adjustable: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Adjustable notch stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg

Merkle Slitter 500mm wide

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

4000 x 2000mm 10000w / 10KW FIBER laser

4000 x 2000mm 6000w / 6 KW FIBER

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

turning diameter over bed: 520 mm turning diameter over slide rest: 300 mm turning length: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-jaw chuck Multifix tool holder device tail stock Technische Daten / technical details: Drehlänge / turning lenght 1000 mm Dreh-Ø über Bett / turning Ø over bed 520 mm Dreh-Ø über Schlitten / turning Ø over sledge 300 mm Drehzahlbereich / spindle speed 30-1600 UpM /rpm Gewicht der Maschine ca. / weight 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6906 Type: Platino Fiber Producer: Prima Power Created: 2014 Parameters: Control System: Prima Power Hours of operation: 27 710 h Beam ON: 12 424 Laser power: 3 kW Working table length: 3000 mm Working table width: 1500 mm Maximum sheet thickness (carbon steel): 20 mm Maximum sheet thickness when cutting (stainless steel): 8 mm Maximum sheet thickness (copper): 6 mm Maximum sheet thickness when cutting (aluminum): 8 mm Feed length X-axis: 3065 mm Feed length Y-axis: 1560 mm Feed length Z-axis: 150 mm Source: IPG 3000 DE→EN Machine height: 2200 mm Machine length: 9797 mm Machine width: 3757 mm Machine weight: 10000 kg Equipment: Cooling Vacuum Two Wichsel tables with steel grates Cutting gas: nitrogen, oxygen and compressed air

CINCINNATI ACW6 slitting line is used in the processing of thin steel sheets with a maximum thickness of 4 mm. The process consists in gradually unrolling the sheet coils towards cutting rollers with special roller knives with a thickness of 5 to 30 mm, and then passing the sheet between the rollers for precise slitting. After the slitting process, the sheet is wound onto coils ready for further processing. The ACW6 slitting line guarantees the highest product quality while making optimum use of the raw material. The CINCINNATI coil slitting line consists of: – sheet decoiler – sheet metal winder – roller knives (thickness 5 mm, 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – ejector spacers (width 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – slitting aggregate unit – brake Technical specifications of the CINCINNATI ACW6 slitting line - maximum sheet thickness: 4 mm - minimum shee ...

MAZAK Laser Cutting Machine STX3015 4kW TOP CONDITION – OVERHAULED IN 2023 Year of construction: 10/2015 very well preserved, overhauled MAZAK laser machine with 4000W Panel format: 3000mm x 1500mm minimum installation area of 2.9m x 7.3m Small parts conveyor belt LAN/USB connection automatic nozzle change automatic focus position adjustment Quick piercing into thick materials Plasma sensor for stainless steel cutting Piercing sensor for piercing Burning sensor for monitoring when cutting structural steel Completely encapsulated machine cover no foundation necessary FE: up to 22mm VA: up to 15mm ALMG: up to 10mm Plastic possible incl. software incl. warranty incl. suction incl. commissioning + training =optional with fully automatic loading and unloading=

Various turning tools Kennametal, Widia and others Prices on request. Complete package or individually. Other items available on request. A total of 13 lattice box tools through company liquidation. All new and unused. Estimated about 10 tons of mass. Mainly Kennametal, Widia, as well as HSK mounts (approx. 300) and various milling heads (approx. 300).

Motor for folding machine Eurofold / Foldmaster 235 / 435 / 200 / 400 Art.: PS2356

Face cutting knife for Polar 66 Art.: PS153 Ersatzteil Nr. / parts No. 446282 / 280403 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 805x95x9.7 mm. Number of holes: 14 / M: 10 Number of rows of holes: Packaging : Disposable crate

cross-section width:: 40 (45) mm cross-section heigth:: 25 mm feed:: 1 - 999.999,9 mm speed of feed:: 1 - 60 m/min cuts max.:: 100 Schnitte/m Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 175 ...

Messer für Papierschneidemaschine / paper knife - guillotine Polar 55 Art.: PS832 Ersatzteil Nr. / parts No. 241580 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimension: 685x95x9.7 Number of holes M10: 14 Number of rows of holes: 2 Packaging : Disposable crate

Knife für Papierschneidemaschine / paper knife - guillotine Polar 76 Face cutting knife for Polar 76 Art.: PS342 Ersatzteil Nr. / parts No. 233231 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimension: 925x110x9.7 Number of holes M10: 14 / 2 lift holes Number of rows of holes: 2 Packaging : Disposable crate

Brotschneidegatter, Fabr. JAC, Type Swing, Semi-automatic

Paper knife - guillotine Polar 78 / 80 Art.: PS223 Ersatzteil Nr. / parts No. 424409 (273893) (446280) Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 960x110x11.7 mm. Number of holes M10: 18 Number of rows of holes: 2 Packaging : Disposable crate

Bread slicer, Fabr. Berkel

Messer HSS für Papierschneider / paper knife HSS - guillotine Ideal 7228 / 7260 (Krug & Priester) Art.: PS4409 Ersatzteil Nr. / parts No. 9000141 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 840x100x10 mm. Number of holes M10: 6 Number of rows of holes: 2 Packaging : Disposable crate

Bread slicer, Fabr. Herlitzius

Brotschneidegatter, Fabr. Samach

Bread slicer, Fabr. Long

Brotschneidegatter, Fabr. MHS, model BM 45 NU