cut to used for sale

: gebraucht : 2890D : China : 210 € : 1 : 160 mm : 50 mm : 125 mm MINT CONDITION turning base for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Information: - Fully glazed cabin with heating and ventilation - Windshield wipers front and rear - Rearview mirror - Rear view camera - Headliner - Interior lighting - Storage compartment - Rear window can be opened - Radio with speaker and USB - Non-slip rubber protective mat - Electrical system: Operating voltage 12 volt battery 60 Ah - Alternator: 60 A starter DENSO/Japan - Work lights: 1 x front, 1 x rear, warning light Vehicle data - Gearbox manufacturer: BONDIOLI - Drive: All-wheel drive - Drive type: hydrostatic - Speed: 0-11 km/h (1st stage), 0-24 km/h (2nd stage) - - Gears: 2 - Travel drive: PTO shaft - Tank volume: 45 liters - Hydraulic oil: 40 liters - Brake: Manual parking brake + brake pedal with inch function - Operating weight :2.580 kg Max. - Lifting capacity: 1,500 kg - Tipping load straight: 1,280 kg - Tipping load: articulated: ...

: gebraucht : 2014 : 2475 : prompt, Zwischenverkauf v : 200 € : 1 : 1000 mm : 600 - 1000 mm : 800 kg : 40 kg : 360 mm : 60 mm : 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tramoggia Toyo Capacità: 125 lt Nuova nel suo imballo originale

Tramoggia Toyo Capacità:60 Lt Nuova ancora nel suo imballo originale

Tramoggia Toyo Capacità: 125 lt Nuova nel suo imballo originale

INVERTER TRIFASE 5,5 KW CON TASTIERINO REMOTO

Tramoggia Toyo Capacità: 60 lt Nuova nel suo imballo originale

Tastierino di controllo Campetella Jolly Plus

Tramoggia Toyo Capacità: 60 lt Nuova nel suo imballo originale

GRANULATORE ROTORE SCAVATO - diamtero rotore 530 - lunghezza rotore 800 - potenza motore 110 kW - lame rotanti 3 - controlame 2 - cabina di isolamento - nastrotrasportatore con metaldetector

Tramoggia Toyo Capacità 120 Lt nuova mai utilizzata

INVERTER TRIFASE 5,5 KW CON TASTIERINO REMOTO

Tramoggia Toyo Capacità 120 Lt nuova mai usata

METAL DETECTOR A PASSAGGIO CIRCOLARE

INVERTER TRIFASE 5,5 KW CON TASTIERINO REMOTO

tramoggia Toyo Capacità 120 Lt nuova mai utilizzata

Termoregolatore ad olio.

Table dimensions 1080 x 700 mm, 30? tiltable Wheel diameter 800 mm. Wheel width 40 mm. Max. cutting height 350 mm. Max. cutting width 660 mm. Cutting length: 5620 mm. Motor power 4 kW. Extraction nozzle diameter 120 mm.

Table sizes: 3000 x 850 mm. Motor: 3 kW Belt sizes: 150 x 7800 mm. Motorised height adjustment

This 6-axis TORNOS Deco 13 b was manufactured in 2004. It features a maximum bar diameter of 13 mm and a spindle speed range of 100 – 12,000 rpm. The machine includes a linear tool system with 6 tool positions and full machining capabilities for turning, drilling, tapping, and threading. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 13 b Swiss Type Lathe we have for sale. Contact us for further details.

This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine includes a 12-station turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details.

• DataMatrix station for marking and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation) • Output max. 400 objects/min, belt speed 5 - 90 m/min • Datamatrix-code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Several other readable codes, a.o. pharmacode • Operation direction from left to right • Product take over by alignment belt, consist of lower (length 500 mm) and height adjustable top belt (length 400 mm) • Discharge belt length 500 mm • Product height max. 100 mm (optional 150 mm), product width 45 - 200 mm, max. product width incl. open flaps 240 mm • Bad ejection by blower nozzle with collection container • Ejection counter control • Central height adjustment for printer and camera • Light barrier for product identification (Trigger) • 1 LAN PCE camera Mini-smart, plain text/code control  ...

• DataMatrix station for labelling and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation). • Output max. 400 items/min, belt speed 5 - 90 m/min • Data matrix code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Various other readable code types, including Pharmacode • Product run from left to right • Product transfer by alignment belt, consisting of lower (600 mm long) and height-adjustable upper belt (400 mm long) • Ejection belt 300 mm long • Product height max. 150 mm, product width 45 - 130 mm • Bad product ejection by pneumatic pusher with collecting container • Ejection countercheck • Central height adjustment for printer and camera • Light barrier for product detection (trigger) • 1 LAN PCE camera Mini-Smart, plain text/code control 6.217 • 3 installation positions for camera: front (as-i ...

Gear shaping machine TOS OHA50A with accessories.

This 5-axis TOS WHQ 13 CNC boring machine was manufactured in 2013. It features a working spindle diameter of 130 mm, a transverse table travel of 5000 mm, and a table load capacity of 16,000 kg. The machine is equipped with a HEIDENHAIN iTNC530 control system and includes an automatic tool change system. If you are looking to get high-quality boring capabilities, consider the TOS WHQ 13 CNC machine we have for sale. Contact us for further details.

Work piece handling system manufactured in 2011. This LANG Eco-Tower + Lang Eco-Feed features a total height of 3192 mm when installed and a load capacity of at least 750 kg. The Eco-Tower has dimensions of 280 x 150 x 180 cm, while the Eco-Feed measures 250 x 70 x 130 cm. If you are looking to get high-quality handling capabilities, consider the LANG Eco-Tower + Lang Eco-Feed system we have for sale. Contact us for further details.

A complete layer palletizing system IW-Anlagentechnik with a pallet wrapper Tosa and pusher technology is available. Process chain: product infeed-layer formation-palletizing-transport-wrapping. 1) Palletizing system IW-Anlagentechnik PMS 120, year of construction: 1992, rotating unit: 90°. 2) Conveyor technology Transpak. 3) Rotary ring stretch wrapper Tosa 124E, year of construction: 2010. The system was used in the food industry for palletizing bottles and other liquid containers. Documentation available. An on-site inspection is possible.

Inv. Num. : 9082 Type: SKJ 8 NC Producer: TOS Created: GO 2020 Parameters: Control system: MEFI CNC 872 Max. workpiece diameter: 800 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Length: 2000 mm Width: 2550 mm Height: 3700 mm Weight: 10000 kg Equipment: Hydraulic table clamping Electric rotation of the cutter head Ball screws GO 2020: Complete machine overhaul with conversion to a new MEFI CNC 872 control system Conversion from the original hydraulic drives to Yaskawa servo motors New electrical installation New hydraulic system and central lubrication

Coming for sale : TOS Hol Monta UB85/6000 CNC , 2014 Under power less used and very good condition

Key data: 4 t

C-frame press for clinch technology Pressing force 4.8 tons. Air pressure 6 bar, 32 mm total stroke 3 mm power stroke, no tools available

Overview  This complete bottling line was last used for bottling spirits and includes a vacuum filler with screw capper, a conveyor belt, a labeler and a printing and inkjet system. The line achieves a maximum output of 1,500 bottles per hour and processes 700 ml and 1,000 ml bottles. Technical details  Output: 1,500 bottles/hour Formats included: 700 ml, 1,000 ml Last used for: Spirits Scope of delivery Feeding table Vacuum filler & screw capper | Toscana Enologica | Monomatic TS | 2008 Conveyor belt (single-track) | Krones Labeler | Enos | T3 | 2017 Inkjet printer | Makroprint | X1 Jet | - Inkjet system | Linx | 5900 | -

A complete machining line consisting of four Toyoda machining centers, Palltec transport and automation system, filter systems, chip conveyors and coolant supply systems is available. 1) 4x CNC horizontal machining center Toyoda FH 630 SX, year of manufacture 3/1: 2007/2008, control: Fanuc 31i, pallet dimensions X/Y: 630mm/630mm, travel X/Y/Z: approx. 1050mm/900mm/1050mm, max. workpiece diameter: 1170mm, max. workpiece height: 1250mm, max. pallet load: 1500kg, spindle taper: BT50, speed: 6000rpm, tool magazine: Fanuc FTS 330, tool positions: 330, operating hours range: approx. 65000h-76000h. All machining centers have the same tool management, but different operating hours within the above-mentioned range. 2) Rail-guided-vehicle system RGV Palltec FPA 630, year of manufacture: 2006. 3) Master computer system with Windows 7 Professional, interfaces: CNC/RGV/peripherals. The production lin ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 € : 555.81 € : 100 mm : 500 mm : 1200 mm : 850 mm : 480 kg : 43 cm³ : 100 x 6 mm : 3 1/2 x 4 mm : 100 x 6 mm : 100 x 3,6 mm : 100 x 3,6 mm : 114,3 x 6,3 mm : 114,3 x 6,3 mm : 114,4 x 6,3 mm : 88,9 x 3,65 mm : 100 x 5 mm : 70 mm : 100 x 25 stehend, 100 x 5 mm : 400 mm : 36 mm : 10 mm : 0 - 1,3 U/min : 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 39500 € : 754.45 € : 127 mm : 850 mm : 1200 mm : 850 mm : 720 kg : 80 cm³ : 127 x 7,1 mm : 4 x 8,56 mm : 127 x 7,1 mm : 114,3 x 5,6 mm : 114,3 x 5,6 mm : 139,7 x 8,8 mm : 139,7 x 8,8 mm : 64 x 6 mm : 88,9 x 3,65 mm : 50 x 4 mm : 90 mm : 130 x 25 stehend, 130 x 6 mm : 700 mm : 36 mm : 10 mm : 0 - 0,75 U/min : 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul Tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 20 mm turning diameter over slide rest: 1200 mm turning length: 3.000 mm centre distance: 3000 mm digital readout: 4 - Achsen bed width: 800 mm spindle bore: 122 mm turning speed range: 1,80 - 355 U/min power requirement: 22 kW 3-jaw-chuck diameter: mm taper in tailstock-quill: 100 (1:20) dia. of quill: 150 mm quill stroke: 350 mm coolant: voltage: 400 V total power requirement: 31 kW spindle nose: Gr. 11, DIN 55027 weight of the machine ca.: 10 t dimensions of the machine ca.: 8,20 x 2,20 x 2,20 m - Serial No.: 75.217 - Rapid feed for carriage - 4-Axis DRO-System SINO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A motorized transport trolley with a cover is available. Load capacity: 300kg, max. speed: 6km/h, steering roller diameter: 260mm, drive wheel diameter: 350mm, loading surface dimensions X/Y: 1250mm/600mm, machine dimensions X/Y/Z: approx. 1650mm/600mm/1750mm, weight: approx. 170kg. Documentation available. An on-site inspection is possible.

: gebraucht : 2012 : 9403 : prompt, Zwischenverkauf v : China : 180 € : 1 : 1/4, 3/8, 1/2 mm : 4 kg operation by hand lever and eccentric 3 tube diameter combined in one assembling and welding of tubesin 90 degrees angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical grinder for the production of pearl barley, spelt and einkorn rice as well as for grinding lentils

: gebraucht : 2973D : prompt, Zwischenverkauf v : China : 540 € : 1 MINT CONDITION horizontal- and vertical rotary table HV 12 direct deviding over 360° scale reading on the table grade dividing dividing by skale via adjustable nonius centre height195 mm table diameter300 mm daylight opening (horizontal)132 mm? worm gear ratio?90:1 weight?76 kg? OPTIONAL:talestock EURO 120,-- dividing plate EURO 120,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMATIC EDGE SANDING machine with 3 units , model TONELLI OTB.15 ( made in ITALY ) second hand machine working condition: Excellent, like new CE regulation: YES voltage: 380/50 for sanding panel edges, on raw and painted edges, flat and shaped, solid, veneered, profiles, frames and various technical data: electric working height adjustment minimum working height: mm.3 maximum working height: mm.100 minimum working width: mm.60 track feed speed adjustable from the control panel: from 5 m/min to 30 m/min track feed with rubber pads and adjustable rubber pressure wheels feed track motor power: 2 HP machine composed of 3 independent units: 1° unit : tilting oscillating sanding unit - pneumatic pad - motor 2 speeds Hp 1,9 / 3,3 - automatic group entry - belt cleaning blower 2° unit : 45° oscillating sanding unit - pneumatic pad - motor 2 speeds Hp 0,6 / 1,2 - autom ...

Code: 0372 Brand: CASOLIN Model: TOP 530 Automatic thickness planer for wood, joinery, furniture, customer-made furniture, wooden joinery, doors, panels, timber framing, sawmills, plastics, composite materials and various Features: Cast iron work table supported by 4 ground columns with inner rise screw syncronously which guarantees the greates rigidity, the work surface of thicknessing table, worked with a particular processing, guarantees excellent performance of guidance and sliding of the workpiece Automatic locking of thicknessing table Shaft with 4 replaceable cutters ‘TERSA’ Rear pressure roller adjustable to 3 positions Steel feed rollers Technical data: Max working width 530 mm Work table dimensions 530 x 1060 mm Max working height 300 mm Min working height 3 mm Useful thickness 8 mm N° 4 replaceable cutters ‘TERSA’ Shaft rotation speed 5000 rp ...

General SKU292T671 LocationBarneveld CEcheck Main Features Motor1.1 KW Length5000 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Tube-typecheck Diameter380 mm Length5000 mm Between inlet and outlet4650 mm Shaft diameter160 mm Pitch245 mm Inletdia. 175 mm Outletdia. 180 mm Motor1,1 kW 219-241/380-420 Volt (Ex) With variable speed drivecheck (Ex) Screw speed27 rpm. (34 895 l/h) Information MakeVan Tongeren kennemer BV Mach.No.Z43721 / T4400 Year of construction2017 Floorspace6,5x0,7 m Total height0,7 m Weight700 kg ATEX compatiblecheckFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDair ...

General SKU292T670 LocationBarneveld CEcheck MakeVan Tongeren kennemer BV Main Features Motor3 KW Length7000 mm Inlet diameter430 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter420 mm Length7000 mm Shaft diameter260 mm Pitch200 mm Inletdia. 430 mm Outletdia. 221 mm Max. temperature100 °C Motor3 kW 219-241/380-420 Volt (Ex) Height between in- and outlet5890 mm MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316) Information TypeZ43430 Mach.No.T4404 Year of construction2015 Floorspace0,7x8,9 m Total height0,9 m ATEX compatiblecheckFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feed ...

General SKU232M159 LocationBarneveld MakeTop Industrie F-77 013 Vaux Le Penil Type1876 0000 Reactor cristallisation CO2 No.1449 Pressure Working pressure350 Bar Main Features MaterialStainless steel Volume0.1 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity0,094 Ltr Vessel sizesdia. 114x145mm With jacketcheck Max. temperature150°C Motor0,25 KW, 400 Volt Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information Year of construction2007 Mounted on legsin framework With switchgearcheck Floorspace1,0x0,6M Total height1,0M Weight130 KGFine chemicalsOther chemicalRubberStainless Steel ReactorsAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicOintmentsGeneric medicinesPaints & coat ...

General SKU292T672 LocationBarneveld CEcheck Main Features Motor1.1 KW Length1900 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter360 mm Length1900 mm Shaft diameter170 mm Pitch255 mm Inletdia. 175 mm (2x) Outletdia. 140 mm Motor1,1 kW 219-241/380-420 Volt With coverscheck MaterialStainless steel Information MakeVan Tongeren kennemer Mach.No.Z43752 Year of construction2015 Floorspace3,2x0,55 m Total height0,6 mFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorga ...

Overview  This cold glue labeller was manufactured in 2012 by German company KRONES AG. The TOPMATIC is equipped with 42 bottle stations (pitch 125 mm) and was operated on 330 ml bottles. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It has 48,121 operating hours. Regular maintenance was carried out (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data  Capacity: Max. 60,000 bph Nominal 43,000 bph Formats: 330 ml Labelling technology: Cold glue Configuration: 42 bottle stations Pitch: 125 mm Inspection: Label inspection system CHECKMAT (Krones) Dimensions: approx. 430 × 340 × 245 cm Power supply: 400 V, 20 A, 14 kW

Overview  This complete brewhouse was manufactured between 2011 and 2013 by various European manufacturers, including spanish manufacturer SlowBeer. It is for sale as the current owner is unable to dedicate sufficient time to its operation due to other business commitments. The brewhouse is currently dismantled and stored in Spain. Optional services such as dismantling, transport, and installation are available upon request. Technical data  Brewhouse capacity: 250 liters per batch Production cycle: approx. 2 weeks per batch Bottling cycle: 1 day per batch Production months/year: 10 months Shelf life of beer: 18 months Heating method: Electric (1 Hot Liquor Tank used), Butane option available (unused) Fermentation tank capacity: 500 liters each (3 tanks) Brewing system power: 15 kW Cooling system power: 2.3 kW Labeling power: 2 kW Scope of Delivery  1 x Brewing Unit | SlowBeer | MB 250 ...

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed