cut to used for sale

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm Forge from 60 to 400 Ton Forging and Annealing Furnace

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

Bearing number: 3685 LOADER Manufacturer: Top Automazioni , Type: 337SX Machine NO.: BRS13122782 RE-S, Year of construction: 2013 Specifications: Stang dia. 6-37 mm rod length 3200 mm Length: 4500 mm, Høhe: , Width: , Weight: 1300 kg

Used fully automatic proofing machine LILLNORD, Type: Topline -As good as new- - for 2 rack trolleys 60 x 80 cm - Computer control TSC2002 - including delivery - Installation on request - Condition: Very good, ready for immediate use Viewing and test run are possible by arrangement.

Siemens Multix TOP ACSS with the following system components: Generator Polydoros IT 55 Tube Opti 150/40/80 HC 0.6/1.0_Bj. 2013 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the man ...

X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.

MODULAR 50 S , YOC 2015.

CLIPPER

METTLER TOLEDO CHECK WEIGHER Usable aperture size 400mm (wide) x 120mm (high) 300mm wide conveyor belt Scales length 530mm Full length 1750mm Line height 980mm Auto push reject Full supermarket spec Left to right production direction

Siemens Multix TOP with the following system components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 C 0.6/1.0_Baujahr 2019 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the ...

Gable top Filling Machine with Capper Made by ELOPAK for Sale Item #: Usm-166 Category Gable Top Machines Gable top Filling Machine with Capper For Sale (ELOPAK) Type: Cold Filling for Fresh Milk/Juices Year of manufacturing 2005 Machine Brand: Elopak Made in Japan Machine Condition: Excellent Spare parts: Large qty spare parts available with machine

pressure: 25 t stroke: mm table surface area: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: WP Capacity: 25 T Distance between columns: 760 mm Distance between cylinder and table: 950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine weight: 20,000 kg Faceplate diameter 1250 mm Number of supports: 1 pcs Dimensions: height 4250 mm width 5630 mm depth of 3550 mm Extras: copying apparatus, turret head on the vertical support Technical condition at the time of sale: Replacement rotary amplifier on thyristor converter. Not operated since 1994 p. Small repair and adjustment of electrical and mechanical parts. The maximum dimensions of a workpiece Height 1150 mm The diameter of 1400 mm Weight 8000 kg

Electrode pliers with air connection for, electrode device, electrode welding device, joint planer, electrode pliers -for: carbon arc process -Cable length: 2.5 m -Dinse connector -Air connection -Number: 2x cables available -Price: per piece -Weight: 4 kg

CTP UNIT HB TOPSETTER (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Ser. No.: 013910086 Counter: 115.778 plates Format (cm): 52 & 74 with software license for both formats Equipment / Additional information: With integrated plate punch With washing station AZURA C85 (M.No.: 92700-0307) Plate stacker, advand PST 48 ( M.No.: M211348121L) Software, complete RIP (6 years old) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date

Bohrleistung in Stahl (-Ø: 50 mm throat: 1500 mm workpiece height max.: 1380 mm Bohrleistung in Guß (-Ø: 60 mm Abstand Spindelmitte bis Säule: 320 - 1250 mm swival range +/-: 180 ° base plate surface area: 2640 x 1000 mm max. torque on the spindle: 310 Nm Bohrspindel-Ø/ Aufnahme: 75 mm /MK 5 bore spindle stroke: 310 mm spindle turning speed range: 28 - 2500 U/min feed:: 0,05 - 2 mm/U power capacity: 4 kW weight of the machine ca.: 4,3 t cube table 500 x 500 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

all stainless steel electrically heated 386 kW frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg

Bezel, stick, lynette -max. passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -Technical drawing in the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg

Bezel, stick, lynette -Max. Passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg

Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: The transport rollers must be replaced.

Inv. Num. : 6305 Type: SKJ 20 Produzent: TOS Erzeugt: 1982 Parametern: Tischdurchmesser: 2000 mm Maximales Werkstückgewicht: 15000 kg Max. Werkstückhöhe: 1200 mm Maximale Tischdrehzahl: 170 1/min Gewicht: 35000 kg

Food Tools CS4AAC round cake slicer Serial: 3697 2007, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts, mobile

Food Tools CS4AAC round cake slicer Serial: 5250 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts and spare blade, mobile

Car jack, jack stand, lifting jack, bottle jack, mechanical jack, axle jack -Manufacturer: Holmatro, Mechanical jack 50 ton -Type: JJ-5013 -Stroke: 125 mm -Shaft: Ø 87 mm -Number: 3x lifting jack available -Price: per piece -Dimensions: 280/220/H295 mm -Weight: 30 kg/piece

liter capacity: . l total power requirement: 6900 W weight of the machine ca.: 0,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tom Chandley Compacta deck oven Serial: 20C18AA02 2020, Stainless three deck oven, HMI touch screen controls for all decks, 15.6Kw, chamber sizes 900mm L x 750mm W x 200mm H, mobile, 3Ph

Metal detector Safeline V4-wheel Mettler Toledo - Model: V4-RAD - Metal detection - Voltage voltage: 100.240 Vac - Frequency: 50 /60 Hz - Power: 340 W (Max.)

Marel/Stork/Townsend twin spiral hot air/steam oven 600 mm belt Machine in lovely condition direct from major UK factory which stopped producing for fast food chain in 2016.

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: Weber Total width: approx. 1,360 mm Total depth: approx. 770 mm Total height: approx. 1,310 mm Content: 360 kg Volume: 770 liters Further data / information: Material color bin: black Material color lid: yellow Usable width: approx. 1,085 mm Useful depth: approx. 640 mm Usable height: approx. 1,000 mm Material: Polyethylene (PE) Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. An additional desired transport or shipment of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery from us.

Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel -Manufacturer: Siemens, Simatic Multi Touch -Type: unfortunately without nameplate -Quantity: 1x panel available -Price per piece -Transport dimensions: 940/570/H370 mm -Weight: 26 kg

Inv. Num. : 6598 Type: SK 12 Producer: ZPS Created: 1964, GO 1994 Parameters: Table diameter: 1180 mm Clamping plate speed: 5.3-225 1/min Max. turning diameter: 1350 mm Max. workpiece height: 900 mm Max. workpiece weight: 5000 kg Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Machine Details Stock-No. 1105-03856 Type of machine CNC Lathe Make COLCHESTER Type TORNADO T 6M Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Technical details turning diameter 440 mm turning length 450 mm control FANUC 21 ITB total power requirement 15 kW Weight of the machine approx. 4 t Additional information NICE COLCHESTER T 6M FROM 2006 FANUC 21 ITB CUCK TAILSTOCK SWARF CONVEYOR VDI 30 TURRET 12 P LIVE TOOLS BARFEEDER MBF 1000 INCLUD

1 LAFER carbon brush emerising/peaching machine type ULTRASOFT TWIN TOUCH, year 2018, table width 2200 mm, 2 brushing rollers, entry and exit in the same side, plaiter exit, dust suction and filters

Cleaning roll holder, floor stand, cleaning cloth roll holder -Manufacturer: Tork, Floor stand for cleaning cloth roll with waste bin -Type: W1 -Roller width: up to approx. 450 mm -Quantity: 5x cleaning roll holders available -Price: per piece -Dimensions: 710/590/H1010 mm -Weight: 8.1 kg/pc.

geared motor -Speed: 19.5 rpm -Power: 0.37 kW -Brake: 24 V -Design: B5 -Shaft: Ø 30 x 60 mm -Protection class: IP 65 -Quantity: 4 available -Price: per piece -Dimensions: 665/200/H250 mm

Geared motor, spur geared motor -Power: 0.25 kW -Speed: 43 rpm -Shaft: Ø 20 mm -Design: B14 -Protection rating: IP65 -Quantity: 1 available -Dimensions: 458/133/H215 mm -Weight: 17.7 kg

Weibert W7-32 Top 5-fold station wagon Planer width: 320mm Cutting length 2600mm Milling stop for tool max. D=220mm 3 motors 3kW Price 7984,-€ excl. VAT Price 9500,-€ with VAT.

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Mettler Toledo XE3CC Metal detector checkweigher Serial: 35004694 2013, Stainless, overall belt dimensions 1600mm x 200mm, metal detector aperture 240mm x 110mm, checkweigher weighs 7g - 700g, 0.1g, max belt speed 18m/min, push arm rejects into reject bins, with manual, 1Ph

hammer drill, chisel hammer, combi hammer, Bosch hammer, cordless hammer drill -Manufacturer: Bauhaus Toolson, cordless drill type PRO-AS 18 Li-1 -incl.: charger and battery -Number: 4x drill drivers available -Price: per piece -Transport dimensions: 240/180/H240 mm -Total weight: 1.9 kg/piece

Offer Welding machine - Hood shrinker Torre Minipack FM 76 Digit The machine is sold due to a business change at our customer's premises. It is operational and has been little used and put into storage in 2020. The Torre Minipack FM 76 Digit Welding and Shrinking Machine Welding and Shrinking Machine - Hood Shrinker is a compact welding and shrinking machine for very good packaging performance, It is quick to work and easy to use. Particularly suitable for small and medium quantities of up to 300 pieces of film packaging per hour. Not all information and data are available yet. These will be added soon. Technical data (partly from the network) Manufacturer: MINIPACK -TORRE S.p.A Type: FM76A DIGIT No. 003001 Year built:2002 Operating hours: little Packaging capacity: 300 pieces of film packaging per hour. Welding frame dimensions: 52 x 38 cm max product height: 26 ...

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: SK50 -Clamping sleeve: Ø31 mm -Dimensions: Ø 88 x 200 mm -Weight: 3.0 kg

Krones Topmatic Heads: 51-8-8-130 right - left Capacity: 65,000 bph Ma-No. K071-438 Krones Topmatic Heads: 51-8-8-130 right - left Capacity: 65,000 BPH Ma-No. K071-438

Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 4DF 16 EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture : 1997 Voltage: 3x 400V Power : 15kW Frequency : 50Hz Capacity : Unknown Dimensions can be measured if necessary.

Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.