cut to length used for sale

Working width: 400 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1400mm; Weight: 550kg;

Working width: 600 mm; Working height: 5mm to 300mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex, diameter 210mm; Height adjustment: electric; Altitude display: digital; Feed speed: 4 - 14 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 700kg;

Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm;

- Programm - air table - side table left and right - spare knife

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Wet stone cutting table without manufacturer's information presumably.. CEDIMA CTS, 400 V, disc ø max. 900 mm, EGW. approx. 250 kg, function not tested

Wet stone cutting table without manufacturer's information presumably.. CEDIMA, 400 V, disc ø max. 600 mm, PE. approx. 180 kg, function not tested

Wet stone cutting table without manufacturer's information presumably.. JUMBO, 400 V, disc ø max. 900 mm, EGW. approx. 250 kg, function not tested

Cut length: 550 mm, Cutting height: 95 mm, 92 mm with press bar cover, Residual cut: 32 mm, 60 mm with press bar cover, Insertion depth: 570 mm, Compression: automatic compression, Press load: 200 – 1100 daN, Blade drive: hydraulic, Control: 7 inch touchpad, Connection values: 230 V / 50 Hz / 1.5 kW

Carousel milling machine Comec FGS-1T Number of generators 1 Unit system: milling unit Pneumatic material central clamp Motor power 11kw Rotational speed adjustable by variator Net price

equipped with a breaker and a loading option, The table is in perfect condition, rarely used. After disassembly, it looks the same as before. Auction-ID: A7-46316-2

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

Fully functional. Free loading, please call if you have any questions

Working area: 1800 x 1000mm; dimension machine: 2600 x 2100 x 1200mm; automatic material feeder dimension: 2700 x 1200 x 1500mm; Auction-ID: A7-45992-140

\" Mixed lot of disc milling cutters / milling wheels, mainly HSS, different diameters, tooth shapes and designs. Partly with keyway. Included are used milling cutters as well as individual unused / originally packaged parts (e.g. WERKO). • Material: mainly HSS • Design: disc cutter / toothed cutter, mixed • Manufacturer: e.g. WERKO (others not clearly assignable) • Condition: used to mint condition • Quantity: over 100 pieces Weight: • Net weight total: 15 kg \" Auction-ID: A7-46417-175

Stable, vertical unwinding and cutting stand for corrugated cardboard, suitable for rolls up to approx. 100 cm high and approx. 60 cm web width. With integrated cutting unit (OCS) and guide profiles for clean unwinding.   Manufacturer marking: OCS (label \"OCS 98004\") Material width: approx. 600 mm (measured) Roll height: approx. 1000 mm Suitable for: 1-wall or 2-wall corrugated cardboard from the roll Auction-ID: A7-46417-33

Highest sheet capacity at 400 N/mm2 x 1000x2 16 A plug Length 1.30 m Width 0.4 m Height 1.30 m Weight 250 kg Tools

Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - / Contact us at -

Crosscut saw for miter cuts Brand: SALVADOR Type: Superangle 600 New machine High performance crosscut saw with rotary table for miter cuts -70° / + 70°. Max. Saw blade diameter 600 mm Saw cross section at straight cut: 30 x 100 mm resp. 310 x 160 mm Saw cross section at 45°: 260 x 100 mm resp. 220 x 160 mm Saw cross section at 70°: 120 x 100 mm resp. 100 x 160 mm Rotary table guided on precision bearings Optical system with laser light barrier for detection of the wood length and Luminescence reader to detect the markings. No manual adjustments for wood thickness Powerful Windows software for easy and safe operation

Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA

Working hours machine: 23304 h Working hours laser on: 22804 h Working hours beam on: 10185 h Laser power: 4400 Watt Working range laser: 3000 x 1500 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 12800 mm Width: 6300 mm Height: 2400 mm Machine weight: 15000 kg Electrical connected load: 51 kVA

Cross-cut saw BERG & SCHMIDT Junior 275 -used-underframe, driving device---------- Technical data ----------cutting height: 60 mm, voltage: 230 V

Cross-cut saw REINHARDT RKP 160 S -used-two-hand control---------- Technical data ----------cutting height max.: 210 mm, saw blade diameter max: 600 mm, length of feed roller conveyor: 3,500 mm, length of cut-to-length roller conveyor: 2,500 mm, motor: 5.5 kW

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

Reference Num.: 4433 Brand: Polar Type: 78 ES Construction year: 1999 Available: 10.06.2026 Status: Not in production Location: Deutschland Cutting Size: 780 mm Electrical Power Input: 2 KW Feeding depth: 780 mm Feeding height max.: 120 mm Machine size: Length: 1,915 mm, Width: 1,550 mm, Height: 1,450 mm Total weight: kg 1,300 / lbs 2,866 Table height: 900 mm Equipment: - Lichtschranke - Programm - Lufttisch

Air table, air conveyor table right 75x50 cm, side table left 75 x 50 cm

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-41

sanding machine designed for smoothing and refining cutting boards used in the cutting process. Auction-ID: A7-46462-23

A paper core cutting machine Sternberg & Phillips with parallel winding capability is available. Winding units: 1, max. core width: 1750mm. An on-site inspection is possible.

Bysprint Fiber 4020 4 KW - Hours: 72,000 - Cutting hours: 20,000 - Last maintenance: 12/19/2025 - All modules in order - Cutting head in order, General overhaul 2024 - Annual scheduled maintenance always carried out by Bystronic

Working width: 1100 mm Number of discs: 2 Auction-ID: A3-43524-1366

Semi-automatic long-cut cold circular saw: - With mitre adjustment left 50°, right 60° - Digital cutting angle display - Feed speed hydraulically adjustable - Hydraulic workpiece clamping - 4 spare saw blades Saw blade diameter 510 mm Cutting diameter 150 mm Cutting area at 90 degrees: flat 450 x 150 mm Cutting range at 90 degrees: square 150 mm Speed 29 / 58 m/min. Total power requirement 4.2 kW Weight 1.55 t Dimensions L-W-H 1.8 x 1.7 x 1.7 mm Auction-ID: A7-46460-460

Type: Circular saw for metal profiles Electrical supply: 380V 50 Hz Motor power: 2.2 †4 kW Auction-ID: A7-46477-15

Type: Stone cutting machine Blade: Diamond disc Cooling: Water cooling Electrical supply: 380V 3F 50 Hz Current: 20 A Auction-ID: A7-46477-11

Frame for transporting panel blanks in the CNC production area, loaded on the left and right on a Euro pallet Auction-ID: A1-46501-263

Bosch professional (blue) in L-Box GKF 12V–8 With battery and charger as well as spare milling cutters Technical highlights of the GKF 12V-8 Ergonomics: World's first professional cordless edger in the 12V segment with a unique shape for perfect control. Depth adjustment: Macro quick adjustment and fine micro adjustment (0.1 mm steps) with locking. Safety: Sensor-controlled drop control that immediately switches off the device in the event of a fall. Auction-ID: A1-46501-1645

A total of seven identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

CNC Portal Plasma Cutting Machine Manufacturer: Eckert Type: Jantar 2 Year of Make: 2011 CNC control Working area: 2x4 m 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console Extraction table

Plasma cutting machine Microstep SPL-P 3001.15, built in 2011 Working area 1500x3000 mm, cuts steel, stainless steel and aluminum, incl. software, incl. plasma source Kjellberg HiFocus 161i with automatic gas console, pressure reducer and Extraction Donaldson Torit DCE for outdoor installation. Last major maintenance at the end of 2024 The plant has already been dismantled , loading is possible.

trench cutter with double throwing wheel, unused Auction-ID: A1-40418-34

Works flawlessly With large and small machine vise with threading devices With foot pedal With lighting With attacks Loading 100 EUR Auction-ID: A1-46501-2042

Auction-ID: A1-46501-2063

Frame for transporting panel blanks in the CNC production area, loaded on the left and right on a Euro pallet Auction-ID: A1-46501-117

Kibani Battery Brush Cutter - Incl. 20V Battery and Charger - Electric Brush Cutter - with 15CM Weed Brush - Grass Trimmer - Edge Mower Auction-ID: A1-40418-256

AGP New old diamond drilling machine with water cooling, guide M14 and 1/2\" intake. This set includes water barrel, PRCD, guide. New old Baier BDN 1700 watt professional slot saw Auction-ID: A1-40418-201

Kibani Battery Brush Cutter - Incl. 20V Battery and Charger - Electric Brush Cutter - with 15CM Weed Brush - Grass Trimmer - Edge Mower Auction-ID: A1-40418-137

Product information \"Cross-cut pull saw KS 120 REB-Set-UG KAPEX, 575313\" Extra class down to the last detail. Strengths and Benefits Dual ball-bearing double column guide for unique precision Double-line laser for exact marking of the saw cut Front-operated fine adjustment for millimetre-precise adjustment of the saw blade angle Integrated special cross-cut position for cutting depths up to max. 120 mm FastFix saw blade change for material-specific work Precise cuts thanks to double column guide Error-free angle transmission via angle bevel and double-line laser Compact, lightweight construction for convenient transport Quick brake Main areas of application Fitting of skirting boards and cover strips up to 120 mm high – without calculation Cutting boards and panels to length up to 305 x 88 mm Fitting of wreath profiles up to 168 mm in the \"original wall position\" Capping of sq ...