cut to length used for sale

Demag Mannesmann 6,3 ton x 11 410 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 11 410 mm Tackle speed: 1 & 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 6,3 ton x 15 100 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 6,3 ton x 15 093 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 15 093 mm Tackle speed: 1 & 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 6,3 ton x 11 410 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 11 410 mm Radiocontrol: no radio control Numbre of riggers : double rigger

Size: 520 x 740 mm Equipments: suitable for Heidelberg, Komori, KBA, Manroland, Ryobi, Sakurai as is Easy installation and removal

Beyeler RH 100 ton x 3100 mm Capacity: 100 ton x 3100 mm Backgauge: manual Passage between uprights: 2630 mm Max stroke: 215 mm Max distance between table -- ram: 410 mm Depth of throat: 255 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Electric motor (power): 5,5 kW Length: 3300 mm Depth: 1550 mm Height: 2450 mm Weight: 7 ton

LVD PPBL 200 ton x 4100 mm Capacity: 200 ton x 4100 mm Backgauge: manual Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 11 kW Weight: 13,4 ton

spindle diameter: 130 mm x-travel: 4000 mm y-travel: 3000 mm z-travel: 2000 mm w-axis: 800 mm table:: 1800 x 2500 table load: 20 t feed range: 4 - 5000 mm/min spindle turning speed range: 10 - 3000 U/min spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 total power requirement: 70 kW weight: 39 t range L-W-H: 8,5 x 8,6 x 5,5 mm equipped with - CNC control Heidenhein iTNC 530 & handwheel - 60-fold tool changer (ISO 50) - NC rotary table 1800 x 2500mm, 20t - IKZ and external coolant supply 20bar - chip conveyor - spindle support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic with rotary table • Max. Tool dimensions 300 x 500 mm • Max. Tool height 120 mm • Max. output 16 cycles/min • Moulding and sealing possible with one tool • Temperature for forming and sealing plate can be set differently • Two-hand operation • 1 tool set available • PLC Omron SYSMAC CPM1 • Touch panel • Mobile • Drive 400V/50Hz

Toyota BT Quick Lift pallet truck 2300kg 1150 mm RA2231 Manufacturer: Toyota Fork length: 1150 mm Fork width: 156 mm Carrying surface width: 520 mm Maximum load capacity: 2300 kg Lifting range: 85 - 200 mm With quick lift, 2x pumping is sufficient to be off the ground, with a maximum load of 150 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Semi-automatic with rotary table Max. tool dimensions 200 x 400 mm Max. tool height 120 mm Output max. 16 cycles/min Forming and sealing possible with one tool Temperature for forming and sealing plate can be set differently Two-handed operation Without tool set Drive 230V/50Hz

• Semi-automatic machine with rotary table • Max. Tool dimensions 300 x 500 mm • Max. tool height 120 mm • Max. output 16 cycles/min • Moulding and sealing possible with one tool • Temperature can be set differently for moulding and sealing plate • Two-hand operation • Without tool set • Drive 230V/50Hz • Incl. an additional Universal 500 FS deep-drawing/sealing machine as a spare parts carrier

• Semi-automatic machine with rotary table • Max. tool dimensions 200 x 400 mm • Max. tool height 120 mm • Max. output 16 cycles/min • Moulding and sealing possible with one tool • Temperature can be set differently for moulding and sealing plate • Two-hand operation • Without tool set • Drive 230V/50Hz

Make: Tos Machine No: F641 Type SPEEDtec CNC brand Siemens CNC type Sinumerik 840D Year of construction 2009 X 1,250 mm Y 1,000 mm Z 600 mm Mounting HSK 100 Motor power 25 kW Speed 12000 RPM Tool Changer Number of pallets 4 Outgoing Aries Including manuals Maximum speed 12,000 RPM Maximum pallet load 4,000 kg Chip transport Magazine slots: 2x 40 , HSK 100 4 tables, 1x 1,000 x 1,250mm / 3x 1,000 x 1,000mm

LVD PPS-TS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: Cadman Express Passage between uprights: 2550 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 16 kW

Inv. Num. : 8398 Type: OFA 71A Producer: TOS Generated: Parameters: Maximum module: 10 mm Maximum gear diameter: 710 mm Maximum table load: 1000 kg Number of teeth of bevel gear: 8-400 Machine height: 2400 mm Machine length: 3900 mm Machine width: 2600 mm Machine weight: 13500 kg Equipment: Set of interchangeable wheels Conveyor

serial number: 31302 control: Fanuc with double spindles: x turning diameter: max. 600 mm x-travel: 1000 mm with magazine: x extensive accessories: ca. 100 Aufnahmen, auch angetrieben weight of the machine ca.: 13 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumohydraulic cylinder TOX PressotechnikHydro-pneumatic press, power packType: S 04.00.050.12 DFabr. Item No.: 208696.460 Year of construction approx. 2000Printing capacity: 4.0 ton. at 10 barPressure capacity: 3.0 ton. at 8 barPressure capacity: 2.6 ton. at 7 barPressure capacity: 2.4 ton. at 6 barPressure capacity: 2.0 ton. at 5 barPressure capacity: 1.6 ton. at 4 barPressure capacity: 1.2 ton. at 3 barTotal stroke: 50 mmPower stroke: 12 mmPiston rod: 30 mmThread mount piston rod: M22 x 2 mmCompressed air requirement: 3 to 10 bar- electronic

Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available.

centre height: 350 mm weight of the machine ca.: 50 KG tool adaptor: MK5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Heidenhain 355 tool adaptor: SK50 weight of the machine ca.: 8 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain 355 x-travel: 850 mm y-travel: 550 mm z-travel: 450 mm tool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 50 mm spindle passage: 26 mm turning length: 275 mm total power requirement: 12 kW weight of the machine ca.: 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 1250 mm y-travel: 1100 mm z-travel: 950 mm Table load: 3000 kg table surface area: 1000x1120 mm turning speeds: 16-1250 U/min spindle taper ISO: 50 Control: Heidenhain total power requirement: kW weight of the machine ca.: 13,4 t dimensions of the machine ca.: m No. 2022 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad w ...

tube diameter: max. 3 Zoll wall strength: 3 mm pressure: 16 t weight of the machine ca.: 45 Kg dimensions: 0,8 x 0,6 x m : 0,65 x 0,60 x 0,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Tosa winding machine is available. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/2800mm. The machine produces sparks. An on-site inspection is possible.

Output: 1000/min, number of cameras: 2. On-site inspection is possible.

A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible.

Several roller conveyors are available for washing baskets that were set up in a low-dust production area. Wash basket width: 500mm. Single pieces without drive. Including swivel table. The roller conveyors are ready for collection.

weight max. in kg: 1000 kg fork length: 1150 mm stroke height: 2900 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2 x 1 x 2,5 m No. 4635 Electric pedestrian stacker / high lift truck 1 tonne TOYOTA 7 SM 10 / 24 V Working range: Lifting height 2900 Control: Nominal load capacity 1000 kg Charger 24 V Weight approx. 580 kg (without battery) plus battery weight approx. 150-200 kg Device works - battery defective The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 400 mm table surface area: Arbeitsbreite 1300 mm pressure: 243 bar oil volume: 64 dm³ ajustment speed: 5,73 mm/sec work speed: 1,84 mm/sec return speed: 7,08 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mm y-travel: 500 mm z-travel: 450 mm table-size: 1250x500 mm spindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/min weight of the machine ca.: 5.2 t HEIDENHAIN TNC-355 Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Manufacture: FANUC 18i-MB x-travel: 510 mm y-travel: 360 mm z-travel: 300 mm table surface area: 600 x 360 mm spindle turning speed - stepless: 12000 U/min dimensions of the machine ca.: 1400 x 2300 x 2300 mmxmmxmm weight of the machine ca.: 2.6 t tool piece magazine with: 24 Plätzen tool piece magazine with: 20 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Upstroke press Top lid can tilt open to allow mould to be (un)loaded Capacity: 150 ton Passage between uprights: 1850 mm Max ram adjustment: 500 mm Distance between table -- ram: 1000 mm Table area: 1800 x 1300 mm Height: 2350 mm

Inv. Num. : 5411 Type: SK 12 Producer: TOS Created: 1961 Parameters: Table diameter: 1200 mm Max. turning diameter: 1300 mm Maximum workpiece weight: 4 t Max. workpiece height: 1000 mm Weight: 18.3 t

VTL TOS SKJ 8F, working condition

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

Various metalworking machines are available. 1) Larger BBM guillotine shears, year of manufacture: 1995. 2) Nimak spot welding machine, year of manufacture: 1990s. 3) Roundel machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table-top stud welder Soyer, year of manufacture: 2000s. 6) Freestanding grinding motor. 7) KSM deburring machine, year of manufacture: 1980s. 8) Larger Tox hydraulic stamping press, year of manufacture: 1990. 9) TES 15 hydraulic press, year of manufacture: 1972. 10) Single-column table press, year of manufacture: 1955. 11) Landert honing machine. On-site inspection is possible.

Machine name: Forklift Manufacturer: Toyota No. 7FBEST13 / 10932 Year of Make: 2010 Condition: used Hours: 5017 h No charger Load capacity: 1250kg Weight without battery: 2279kg Battery voltage 24 V Lifting height: 3010mm UVV without defects 01/25 Monthly maintenance carried out

Haco PPM 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Backgauge: electric Passage between uprights: 2600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 10 HP Length: 3270 mm Depth: 1550 mm Height: 2240 mm Weight: 7,5 ton

diameter: div. number: 16x tool adaptor: SK 50 Tool Package DS SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 56x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.

Stock number: 3994 GABELSTABLER Manufacturer: TRUCKGAFLER VETTER , Type: 7 - 8 - 10 T Ton Year of Make: 2021 Specifications: Lifting capacity 10,000 kg Forklength 2400 mm mm Fork width 200 mm Tykkelse 60 mm

LVD PPBL-H 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 130 mm Max distance between table -- ram: 310 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 65 mm/sec Electric motor (power): 7,5 kW Weight: 6,5 ton

LVD PPBL-H 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 4 kW Length: 3200 mm Depth: 1350 mm Height: 2100 mm Weight: 5 ton

LVD PPBL 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 88 mm/sec Electric motor (power): 5 kW Length: 3200 mm Depth: 1260 mm Height: 2100 mm Weight: 4 ton

Removal system for lid to capsule 16-fold Abstract: The lids are removed from the open mold with the removal arm. The injected products are removed from the ejector side. On the removal arm, the presence of the parts is controlled. Once the unloading arm has reached its end position, the lid with a vertical servo axis into the waiting box, As soon as the box is full (counting the lids), the box is transported outside and the next empty box is pulled in. Specifications: Product Type: Round Lid Dimensions: DN 50 mm Height: 6 mm Number of cavities: 16 Cycle time of the IML system: 5 s

Rotary cultivator Pellenc Tournesol TS 1000 LD, three-point rear attachment, tool Rotary cultivator with 2 movable cutter blades on the boom (manual length adjustment approx. +/- 25 cm), hydraulic drive by means of 540 rpm push-on PTO pump, hydraulic lifting (1 x hydraulic connection ew required). Support and evasion function can be adjusted several times, solid sliding shoe (approx. 60 kg). Year of manufacture 2014, used. Manufacturer's specs: For tractors 50 hp, hydraulics 30-40 ltr. /min. at 180 bar, working speed max. 5 km/h, vine width min. 2.20 m.