cut to length used for sale

Length 5998mm, high cargo space - working air conditioning - navigation - reversing camera - line assistance - parking sensors - low fog lights - attention: minor body damage, both mirrors damaged + sliding door needs to be repaired - overall neat condition - starts, drives, brakes smoothly, good tyres Auction-ID: A3-44485-10663

STAHLGRUPPE SG9 - Green 7 Drawers - 5 Filled 212 pcs Tools Drawer handles with reference images Sturdy plastic handle on the worktop 2 swivel castors, 2 of which are braked Glossy green finish • Double-walled version with two full-surface layers of robust steel plate, for stability and longevity • Ergonomic handles integrated into the bin, made of shock-resistant plastic • Side perforated panels allow tools and accessories to be attached • Central locking with cylinder lock • One-handed safety lock on each drawer prevents accidental opening while driving • Ball bearings, safe and easy to drive under high loads • Robust drawers, loadable up to 40 kg • Slats 100% fully extendable • Integrated bumper protection • Labels of drawers are possible for marking • 4 castors, diameter 125 mm: 2 fixed rollers, 2 swivel castors (2 with brakes) • Load per drawer small 25 kg, me ...

Toyota 02-7FDF25 Maintenance every 250 hours Annual Large / Liquids + Filters Works fine Auction-ID: A3-43535-19202

starts, drives and brakes - working air conditioning - 6 gears - signs of wear both inside and outside (see photos); Handle case is defective so does not open at the moment - dashboard notification - validation key is missing Auction-ID: A3-44485-10993

Serial Number: B3M92108096AC Voltage: 380 V Frequency: 50 Hz Power: 14 kVA Engine power: 7.5 kVA Strokes: 760 x 430 x 500 mm Pin Type: BT 40 – 8000 rpm Tool changer: 24 positions Equipment: 4th axis Order: Ultimax 3 Status: Sold without tools and in the condition Auction-ID: A1-46647-406

in 10/8/2024 timing belt replaced (see attached invoice) - tow bar - slight body damage but does not interfere with use, sliding door goes smoothly - starts, drives and brakes but second gear creaks - left turn signal needs to be repaired - star in windshield - reversing camera installed but screen & radio are NOT included - sold empty - to be picked up in Nijlen Auction-ID: A3-44485-10992

Auction-ID: A7-46691-1

incl. steel rack; Dim. approx. 1700x550x1600 mm Auction-ID: A1-46386-2

Checkweigher with metal detector METTLER TOLEDO never installed, still packed on pallet consisting of: - a METTLER TOLEDO metal detector type M30 SERIES, working width 45cm x 10 cm with touch screen - a METTLER TOLEDO checkweigher type: CM 3350 year 2025, max capacity 2500g, min 50g, e = 0.5g , d=0.5g , max speed 15m/min - 2 sorting bins with pneumatic pusher - Technical documents - USB flash drive - Detection test kit Auction-ID: A1-45912-4

Year 2009, 8 Slots Rotary Head ⚠️This lot is part of a combination — read carefully before bidding This lot is part of the combination n°102 which includes the items n° 102 of the ... Nos. 16, 19, 21, 22, 23 and 25. Closing: The combination will close approximately 20 minutes after the last individual lot in the combination closes. Adjudication: At closing, two scenarios are possible: - If the bid on the combination exceeds the sum of the best individual bids → the combination is awarded, the individual lots will be void. - If the bid on the combination is less than this amount → the individual lots are sold separately, the combination will not be accepted. Auction-ID: A1-45912-23

Complete set consisting of: Long 12 x Tensioner 125 mm 48205-125 Long 12 x Base Plates QuickPoint 75748 Long 1 base plate of tower QuickTower 70005 Lang Tensioning Tower QuickTower 70650

Odometer and rev counter defective, starts via button on the side. Screaming eagle camshaft timing chain set (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-42018-254

workbench on wheels with worktop; Number of drawers: 13; Number of filled drawers: 11; 294 pieces, material chrome-vanadium; wooden worktop; 2 parts lockable; 2× socket wrench sets 1/2\" & 1/4\"; Torque wrench 40–220 Nm; Ring/open-end wrench sets (e.g. 6–32 mm), ring ratchet open-end wrench set (8–19 mm); Allen (1.5–10 mm), Torx (T8–T70); Screwdrivers (21 pcs.), pliers (9 pcs.); Caliper 0–150 mm (0.02 mm); Chisels/pin drivers (9 pcs.), hammers (3 pcs.); T-handle Torx (T15–T45), T-handle hexagon (2–10 mm); Chromium-molybdenum impact sockets (10–24 mm); T-handle sockets (7–14 mm); VDE tools (10 pcs.), files & hook set (8 pcs.); L 112 × W 55 × H 110 cm, weight 152 kg; Unused in box Auction-ID: A1-41997-115

Equipped with roller (width: 120 cm) Center-to-center distance of the tubes: 5 cm Disc diameter: 60 cm Auction-ID: A1-40139-291

Equipped with drive! Approx. 2 to 4 tons; remote control included; Auction-ID: A1-41997-96

Equipped with: windscreen wiper, rear-view mirror, gas tank, closed protection cabin, hydraulic connection, lighting Auction-ID: A1-40139-209

Multifix size C 14 pieces. Used See pictures Viewing desired By appointment Auction-ID: A7-46993-4

Equipped with: ac, cruise control, radio/cd, tow bar, Auction-ID: A1-42018-176

Equipped with 3 toilets; 3 pee trays; boiler; Sinks Auction-ID: A1-40139-224

Equipped with 2 toilets; 2 sinks; Clean water tank; Electric pump; Lighting; Meter cupboard; Unused Auction-ID: A1-42018-8

Including 1x RUFAST Tacker, 2x 6 inch hand sander Auction-ID: A1-46623-23

New brake calipers and discs (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-42018-255

These include: Welding hood, hole saw, hand tools, plunge saw and drill Auction-ID: A1-46651-1028

Approx. 35 empty suitcases from: DeWalt, BOSCH, PASLODE and MAKITA Auction-ID: A1-46651-1030

About 200 toners for different printers are offered. estimated value of goods 2500€ Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-205

3 pieces of toner in the colors 2x BK, M and 1 piece of maintenance cassette are offered. Estimated value of goods: 800€ Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-256

Equipped with: Toyota, type: 7FBMF25, serial number: 7FBMF25-10170, lifting capacity: 2,500 kg, mast: triplex, drive: electric, battery: EMROL EDrive – 80V – 625Ah/C5, battery year: 2017, equipped with sideshift, 4-wheel version, including battery and charger, own weight: approx. 4,470 kg, battery weight: approx. 1,570 kg, total width: approx. 1,170 mm, construction height: approx. 2,215 mm, voltage: 80V. Auction-ID: A1-40139-211

Consisting of: DJR186 Reciprocating Saw, DTM52 Multitool, DJV182 Jigsaw, DGA504 Angle Grinder, DC18RD Dual Battery Charger, Tool Bag Auction-ID: A1-46651-1017

Equipped with: hour counter at hour position replaced 3746 hours, length 370+240 forks, Toyota 40-3FD50 diesel forklift, 5,000 kg, Cascade Viewmast, forks 2,400 mm, robust Toyota forklift truck equipped with Cascade Viewmast, extra long forks, own weight: approx. 8,100 kg, open cabin/overhead guard, VCA/VA inspection sticker available, forklift will be inspected again next month. Auction-ID: A1-40139-39

Jaws with base jaws and top jaws (Forkardt) F+315, F 315 DURO 315 FNC 400 FGB 315 125 32 D180596000 12 43 26 M12 x 1.5 54 63.5 0.95 DURO-NC 315 HG-F 315 KTNCV 400 DURO-N ) Designation and jaws with base jaws and top jaws (Forkardt) F+315, F 315 DURO 315 FNC 400 FGB 315 125 32 D180596000 12 43 26 M12 x 1.5 54 63.5 0.95 DURO-NC 315 HG-F 315 KTNCV 400 DURO-N ) see pictures Viewing desired by appointment Auction-ID: A7-46993-5

Consisting of: DTM51 Multitool, DGA504 Angle grinder, DDF484 Screwdriver, DTD152 Impact driver Auction-ID: A1-46651-1018

Stainless Steel 2-Cup Filling Machine Equipped with touchscreen control Equipped with integrated conveyor belt Extra conveyor belt included Conveyor belt adjustable in height Conveyor belt width: 8 cm Length of extra conveyor belt: over 3 meters Conveyor belt equipped with 2 bends Equipped with dosing system with 2 filling heads Pneumatic controlled system Equipped with electric control box Powered by electric motor with gearbox Suitable for bottles, jars and other packaging Machine made of stainless steel Including loose conveyor belt parts / links Auction-ID: A1-40113-163

Contain various toys in different sizes. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2000 € The Euro pallet and lattice box are not part of the auction. Auction-ID: A7-46944-76

Consisting of: 1x DTD153 impact screwdriver, 1x DTW190 impact wrench (2020), DJV182 jigsaw, DMR110 radio (2019), 3x case Auction-ID: A1-46623-20

3 pieces of toner are offered in the colors yellow, cyan, manganta. Estimated value of goods: 600€ Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-255

Contain various toys in different sizes. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-74

Equipped with 11 drawers, 9 of which are filled with tools; professional chrome-vanadium tools; heavy duty tool trolley; wooden worktop; 4 wheels; sturdy handle; Unused in box (transport dimensions 140x60x115 cm) Auction-ID: A1-41997-114

Technical details Manufacturer: BMW Model: 318d Touring (G21) Type: Passenger car (station wagon) First registration: 10/2020 Engine: 2.0 L hybrid diesel Power: 150 hp (110 kW) Transmission: Automatic Drive: Rear-wheel drive (RWD) Mileage: 160,000 km Previous owners: 1 Exterior color: White Equipment: - Navigation system with touchscreen display - Fully digital instrument cluster - Heated front seats - Automatic climate control - Front and rear parking sensors - Cruise control - Drive Mode Select - Start-stop system - ISOFIX child seat mounts - Alloy wheels with summer tires Auction-ID: A7-46938-4

Features: Fieldpiece Leak Detector with Heated Diode DR58EU Fieldpiece manifold wireless, digital, 4-port SM480INT Fieldpiece vacuum pump 6CFM RunQuick VP67EU Fieldpiece vacuum meter wireless MG44INT Fieldpiece drain unit digital MR45INT Fieldpiece thermometer rod and infrared SPK3 empty Fieldpiece scale with wireless LCD out Mastercool refrigerant cylinder 12.5L Mastercool coolant tank adapter W12.8-14x1/4 FL9063 (EU standard) Mastercool gasket for tankad 90640 CPS cylinder pre-adapter from RU1 to 1/4'' Reading unit Job Link suitable up to 100KG according to BRL 100 Mastecool wheel opener 5/16 female thread x 1/4 external thread Auction-ID: A1-40113-36

Featured; Fan; 2 keys; Door with lock; Window mirrors; Ramp; Hook top. Auction-ID: A1-40113-192

Tool holder shaft type:HSK-A 100 Tool holder shaft type:Wohlhaupter Tool holder shaft type:Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request.

measuring range X-axis:150-300 mm measuring range Y-axis: mm Table dimensions: mm measurement range Z =:450 mm tool diameter: mm tool taper: SK compressed air: bar dimensions: m machine weight ab.: kg clamping surface upper angle: Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer

measuring range X-axis:500 mm measuring range Y-axis: mm Table dimensions: mm measurement range Z =:1000 mm tool diameter: mm tool taper: SK compressed air:4-6 bar dimensions: m machine weight ab.: kg Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

measuring range X-axis:-50 . 530/830/1030 mm measurement range Z =:605/805/1005 mm tool taper:30 & 40 VDI compressed air:6 bar dimensions:2200 x 1200 x 2100 m machine weight ab.:900 kg Vertical Toolsetter with Cutting Edge detection via Camera System. Operating over CNC Control yb PC System or Manually, 3 axes, CNC Equipped with Modular Prescision Spindle with CNC Rotary Axis. Digital Glas Scale in all Axis and Linear Roller bearing in all Axis of the Slide Carriage. Electronic measuring equipment: PC electronics with intelligent KELCH EasyVision image processing 17" TFT colour monitor Optional: second 17" TFT monitor for full screen measuring window The CNC Toolsetter is in good condition and ready for immediate use.

x-travel:600 mm y-travel:450 mm z-travel:400 mm Table area:700 x 480 mm spindle turning speed range:10 - 3150 U/min spindle taper ISO:40 quill stroke:80 mm dimensions of the machine ca.:1,8 x 2,1 x 1,9 m total power requirement:8 kW weight of the machine ca.:3,5 t Machine with universal turn, sviwel and tilting table - CNC control DIALOG II - splash guards - misc. parts

x-travel:1000 mm y-travel:600 mm z-travel:550 mm fixed clamping table:1200 x 600 mm spindle drive motor:9 kW spindle taper ISO:40 spindle turning speed range:10 - 5000 U/min feed range:2 - 6000 mm/min total power requirement:15 kW weight of the machine ca.:6 t

Keyence Digital Measuring Projector ? Model XM-1600 General: Digital measuring projector with a high resolution image measurement system and very easy operation. Place the part on the stage and measure by pressing a button. Supports automated measurements of up to 300 dimensions within seconds. Measuring Head / Control Unit: ·Sensor: Monochrome CMOS 1 inch, 20 megapixels ·Display: 12.1 inch LCD monitor (WXGA 1280 x 800) ·Lens: Double telecentric lens Measuring Field and Measuring Range: ·Standard measuring field: approx. 100 mm diameter ·Precision mode measuring field: approx. 25 x 25 mm Measurement Accuracy and Repeatability: ·Display resolution: 0.1 micrometer ·Repeatability (standard, without stage movement): approx. plus minus 1 micrometer ·Precision mode (without stage movement): approx. plus minus 0.5 micrometer Stage / Travel Axes: ·XY measuring stage: motorized ·Z axis ...

x-travel:500 mm y-travel:400 mm z-travel:330 mm table-size:710 x 410 mm spindle taper ISO:40 quill stroke:100 mm control:HEIDENHAIN TNC 335 B table load:180 kg no. of flutes:8 groove width:14/25 mm tool taper:SK 40 speeds::20 - 3000 U/min feeds:infinitely variable1-1250 mm/min rapid traverse:5000 mm/min total power requirement:13 kW weight of the machine ca.:2500 kg dimensions of the machine ca.:2000 x 2800 x 2300 mm Year:ca. 1984 Zusatzinformationen ? Schile-Elektroschrank mit CNC-Steuerung Heidenhain TNC 355 ? Starrer Winkeltisch 710 x 400mm ? Spritzschutzverkleidung / Halbkabine ? Kopf nach Skala präzise drehbar über Kurbel ? Kopf komplett wegschwenkbar für horizontal Spindel

x-travel:500 mm y-travel:400 mm z-travel:330 mm table-size:400 x 710 mm spindle taper ISO:40 quill stroke:100 mm control:HEIDENHAIN TNC 335 table load:180 kg no. of flutes:8 groove width:14/45 mm tool taper:ISA 40 speeds::20 - 3000 /28- 4000 U/min feeds:infinitely variable1-1250 mm/min rapid traverse:5000 mm/min total power requirement:13 kW weight of the machine ca.:2500 kg dimensions of the machine ca.:2000 x 2800 x 2300 mm Documents:inkl. Zusatzinformationen ? Schile-Elektroschrank mit CNC-Steuerung Heidenhain TNC 355 ? Starrer Winkeltisch 710 x 400mm ? Spritzschutzverkleidung / Halbkabine ? Kopf nach Skala präzise drehbar über Kurbel ? Kopf komplett wegschwenkbar für horizontal Spindel

total power requirement:2,4 kW weight of the machine ca.:1150 kg dimensions of the machine ca.:1550 x 1615 x 1630 mm table clamping surface LxW:315 x 710 mm max. tool weight:200 kg T - slots distance:63 mm T - slots - width:12 mm taper bore:Spindel SK 40 spindle turning speed range:56 - 1800 U/min feed speeds:11,2 -355 mm/min Documents:vorhanden