cut to length used for sale

12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used

Universal face and boring head LENZ type LPA 1SSpindle tool, spindle head similar to WOHLHAUPTER UPA3Tool holder: SK 40 - M16Adjustment accuracy: 0.01 mm- Accessories as shown- Storage boxWeight: approx. 5 kggood condition; used

Electric towing vehicle, tow tractor for tugger train SILENT tow tractor STILL type R063-wheel tow tractor, electric tractorFabr. No. W4X126A00120 year of construction 2010Towing load: max. 6000 kgPayload 150 kgAxle load front: 420 kgAxle load rear: 600 kgDrive power: 3.2 kW /60 min. Battery voltage: 24 volts- 3-wheel tractor- without towbar, carrier plate with 14 mm holes, hole spacing 65 /75 x 120 mm- lighting device- 24 volt socket rear- battery from year of construction 2010, type 5 EPzS 625 (24 volt/ 625 Ah) - defective

Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4Masch. No. 341020 Year of construction 1998Travel distances X: 400 mm Y: 320 mm Z: 400 mmTable size 650 x 350 mmSpindle holder SK 40Spindle speed 40 - 2500 rpm. Feeds X, Y and Z axis 0 - 1000 mm/min. infinitely variableRapid traverse X, Y axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Quill adjustment vertical 60 mmDrive power Spindle motor 3 KWnet connection 400 volts, 50 Hz- CNC line control Heidenhain TNC 124- Spindle speed via 2 gear stages and

8 pieces - Tugger train Tow tractor STILL - Electric tow tractor STILL Type CX TLogistic train Towing vehicles, tugger train for logistics trains Year of construction all around 2010 or laterBatteries from 2010 to 2017Plus a chargerScope of delivery for the offer price:8 pieces Electric tow tractor STILL type CX Each tractor has a battery installed.1 piece chargerAll devices workA battery is defective, so a device does not work. Technical data:Tensile load: max. 4000 kgNominal drive power: 3 kWBatteria voltage: 24

Compressed air toggle press BURGER type D04Fabr. No. 4497 Year of construction approx. 1972Compressive force max. 6 ton. Projection 150 mmPlunger stroke 39 mmTable size 340 x 270 mmThrough-hole opening 46 mmInstallation height max. 160 mmTool holder 25 mmPlunger plate 90 mmPneumatic operating pressure 5 barMains connection 220 V 50 Hz- Pressure regulator for press force adjustment- Lifting height adjustment 7, 21, 40 mm- Electric foot switch- Table height adjustmentSpace requirement L x W x H 700 x 500 x 1300 mmWeight

Pneumatic toggle press, pneumatic press SCHMIDT type 34-12Fabr. No. 400160-03 Serial No. 0028 Year of manufacture 2008Compressive force 28 kN = 2.8 ton. Throat depth 130 mmPlunger area 63 x 36 mmPlunger stroke 12 mmPin hole 20 mm with clamping screwCompressed air requirement 2 to 6 bar- Stroke length infinitely variable via adjustable fixed stop for the upper end of stroke position- Fine adjustment for lower end of stroke position with scale 1 tick = 0.05 mm- Stroke triggered via pneumatic valve, triggered by material insertion- Press stand 45 off

Tool holder combination holder for internal and external cooling VDI 40 Ø 25120/Ø4090/Ø3670 Cantilever length (LPR) 145.00 mm Function Length (LF) 120.00 mm Functional width (WF) 42.50 mm Pick-up diameter, min. (DCONN) 25.00 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI40 Interface size Ø 25.0 (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Pin alignment system (block) Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-17-4025lctxdi-kombih-f-i nner-u-ausauskuehlung-bore-25-mm-long-ausfäehrung-differential-verste llung-differentialialverstellung-/103300 Pcs:7/74/4

Tool holder combination holder for internal and external cooling VDI 25 Ø 25 mm/ Ø32mm Manufacturer: EWS Country of origin: Germany Shaft size VDI25 Cantilever length (LPR) 95.00 mm Functional length (LF) 70.00 mm Functional width (WF) 30.00 mm Mounting diameter, min. (DCONN) 25.40 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Interface size Ø 1" (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Price without VAT Link to the product on the manufacturer's website: ews-tools.de/de-DE/product/ews-17-2525-4mft-kombih-f-innen-u-aussenkue hlung-bohrungs-25-4-mm-1-/66355 Condition: New

Tool holder combination holder for internal and external cooling VDI 50 Ø 4085125 Cantilever length (LPR) 125.00 mm Functional length (LF) 85.00 mm Functional width (WF) 42.50 mm Mounting diameter, min. (DCONN) 40.00 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI50 Interface size Ø 40.0 (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Pin alignment system (block) Price without VAT Pieces:4

Tool holder combination holder for internal and external cooling VDI 60 Ø 50200235 17.6050.8S670 Cantilever length (LPR) 235.00 mm Function Length (LF) 200.00 mm Functional width (WF) 62.50 mm Mounting diameter, min. (DCONN) 50.80 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI60 Interface size Ø 2" (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-17-6050-8s670-kombih-f-i nnen-u-ausauskuehlung-durchmesser-50-8-mm-2-/68694 Pieces:4

Siemens Simatic 6AV7872-0BC12-1AC0 Touch Panel PC Touch 15" 677B Series P6 6AV7872-0BC12-1AC0 Touch 15" Panel PC 677B Verse. 03 More items - new and used - can be found in our shop! International shipping costs on request!

Tool holder VDI 30 longitudinal holder Interface size square 20x20 4.3020DSS left Cantilever length (LPR) 60.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 22.00 mm Clamping length, max. (LSCX) 60.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-4-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c2-links-/69246 Condition: New

Bosch Angle Head Cabinet Tool You are buying a high-quality winding head cabinet machine for anchor production. The area of application mainly concerns anchor production. Manufacturing/production/operating documents are included with the machine. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Tool holder VDI 30 longitudinal holder Interface size square 20x20 2.3020DSS right overhead Cantilever length (LPR) 70.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 23.20 mm Clamping length, max. (LSCX) 70.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-2-3020dss-langengsaufnah me-stahlhoehe-20-din-69-880-form-c3-right-overhead-/69572 Condition: New

Tool holder VDI 30 longitudinal holder Interface size square 20x20 right 1.3020DSS Cantilever length (LPR) 75.00 mm Functional length (LF) 0.00 mm Operating Height (HF) 19.05 mm Functional width (WF) 60.00 mm Clamping length, max. (LSCX) 75.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-1-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c3-rechts-ueberkopf-/68760 Price without VAT

Boring rod holder with external cooling radial Ø 1675 / Ø1875 / Ø2575 / Ø3275 Cantilever Length (LPR) 168.00 mm Function Length (LF) 143.00 mm Functional width (WF) 60.00 mm Mounting diameter, min. (DCONN) 16/18/25/32 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI50 Interface size Ø 16/18/25/32 (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-17-5016x75-kombih-f-innen-u-auss enkuehlung-bohrungs-16-mm-x-75mm-/66136 Condition: New Pcs:3/3/7/1

Tool holder boring rod holder VDI 40 36×95/1676/2596/2895/2295 Manufacturer: EWS Type: VDI 40 Bar diameter: 36/16/25/28/22 Bet Height: 95/76/96/95 Price without VAT Country of origin: Germany Condition: new Pieces: 2/8/7/1/1

Tool holder combination holder for internal and external cooling right/left VDI 40 Ø 25 Cantilever length (LPR) 180.00 mm Functional Length (LF) 150.00 mm Functional width (WF) 10.00 mm Mounting diameter, min. (DCONN) 25.40 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI40 Interface size Ø 1" (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Pin alignment system Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-17-4025-4mp620-kombih-f- innen-u-ausauskuehlung-bohrungs-25-4-mm-1-/22571 Pieces:5Right/5Left

Tool holder longitudinal holder VDI40 steel height 25 Links Functional length (LF) 0.00 mm Operating Height (HF) 25.40 mm Functional width (WF) 25.50 mm Clamping length, max. (LSCX) 85.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI40 Square Interface Size 1"x1" Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-3-4025-4dss-laengsaufnahme-stahl hoehe-25-4-1-/69384 Condition: New Pieces:12

Tool holder longitudinal holder VDI50 steel height 32 left Functional length (LF) 0.00 mm Functional height (HF) 32 mm Clamping length, max. (LSCX) 85.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI50 Square Interface Size 1"x1" Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Condition: New Pieces:5

Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible.

weight: 100 kg : 2 Stück height: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Prism support solid steel Metrics: Width: 137 cm Depth: 40 cm Height: 30 / 50 cm - Scope of application: D750-D2250 - Steel on steel: 100 tons - Steel on intermediate layer: 200 tons - Net weight: 1100 KG More items - new and used - can be found in our shop! International shipping costs on request!

Tool holder for two boring rod holders VDI 40 19.4025LR25MS Manufacturer: EWS Country of origin: Germany Body Diameter 1 (BD1) 55.00 mm Cantilever length (LPR) 115.00 mm Functional length (LF) 14.00 mm Pick-up diameter, min. (DCONN) 25.00 mm Clamping length, max. (LSCX) 101.00 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI40 Interface size Ø 25.0 (drill rod) Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-19-4025lr25ms-werkzeugaufnahme-b ohrungs-25-mm-050stat-10-lr25ms-/64727 Condition: New

Tool holder longitudinal holder VDI 50 25 4.5025L1=120ISC Manufacturer: EWS Country of origin: Germany Functional length (LF) 0.00 mm Working height (HF) 25.00 mm Functional width (WF) 26.00 mm Clamping length, max. (LSCX) 110.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI50 Interface size square 25x25 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-4-5025l1-120isc-laengsaufnahme-s tahlhoehe-25-/69468  Condition: New

Tool holder square longitudinal holder left, overhead VDI 50 steel height 25 4.5025L1=120ISC2 Manufacturer: EWS Country of origin: Germany Cantilever length (LPR) 110.00 mm Functional length (LF) 0.00 mm Working height (HF) 25.00 mm Functional width (WF) 26.00 mm Clamping length, max. (LSCX) 110.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI50 Interface size square 25x25 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-4-5025l1-120isc2-langeng saufnahme-stahlhöhe-25-/69471 Pieces:3

Approx. 170 tool holders, some with tools

A punch riveting tool Böllhoff is available. Documentation available. An on-site inspection is possible.

Universal table router FZ0 from Zimmermann Model milling machine with adjustable Bosch motor GGS 27 LC Ideal for use in model making and mould making. Drive motor 230Volt, 0.6kW Spindle speed adjustable approx. 12000 to 27000 rpm Machine table approx. 590 x 420mm Unit swivel on both sides up to 90 degrees Longitudinal stop with fine adjustment Extraction hood and protective hood Collet holder 6mm and 8mm Including the milling cutters and burrs shown With lockable base cabinet, 2 drawers and a door, key provided The base cabinet was provided by the previous owner with an aluminum sheet over angles, which offers an integrated extraction option, see photos Waldmann surface-mounted lamp with attached magnifying glass Original paint, dabbed in places CE mark Very well maintained machine from prototype production in the motorsport department of a Wolfsburg car manufac ...

quantity: 1 Koffer : . The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of floors: 7 Einsätze Width of floors: 1000 mm Depth of floors: . mm height: 1950 mm depth: 600 mm width: 1050 mm Roller shutter defective The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.

Knapp transfer roller conveyor Toothed belt slider 90° 525-690-625 RA1890 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 525 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 525 Nominal / outside width in mm: 690 Roll width in mm: 625 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,25 Überschieber Con ...

Tool trolleys in various sizes and designs from Gedore & Orion

We have numerous Multifix steel holders, size C in various designs in stock. Partly also with drills and turning steels. Please inquire about exact dates and requests.

We have several Multifix steel holders, size D1D in various designs in stock. Partly also with drills and turning steels. Please inquire about exact dates and requests.

gebr. Steel Bracket Insert Fabr. Tripan, Type 431 Kj Uregwt Ucehyxkonb Please request the respective quantity individually.

We have several Multifix steel holders, size D1D in various designs in stock. Partly also with drills and turning steels. Please inquire about exact dates and requests. Gladly also in larger quantities.

Like NEW! Never used Inductive hardening machine for bolts M8 and M10 with year of manufacture 2019 The equipment is designed for automatic inductive hardening of screws and bolts M8 and M10. The plant was built by the company Grimm Zuführtechnik. It is designed for approx. 70-80 parts per minute (depending on the component) and has various monitoring options (temperatures, component heights, component types, rotation, etc.). The components are conveyed from a hopper belt via a steep conveyor to a linear sorter and from there are separated and transferred to an 8-station indexing table with 2 nests per station. A 50kW HF generator from IDEA is connected, which provides further monitoring (energy quantity, earth fault monitoring, flow quantity and water temperature of the inductor, etc.). The plant has its own tank for quenching water, from which the components are transported out  ...

Towing capacity: 6000kg, platform load capacity: 150kg, rated tractive force: 1200N, max. tractive force: 6500N, travel speed with/without load: 20km/h/12km/h, axle load front/rear: 550kg/860kg, wheelbase: 1190mm, track width: 860mm, turning radius: 1650mm, machine dimensions X/Y/Z: approx. 1850mm/1000mm/2100mm, weight: approx. 1800kg. Including 4 trailers. Documentation available. An on-site inspection is possible.

Tool presettler Zoller smile 400 pilot 2 BJ 2008