cut to length used for sale

Tool holder Weldon BT40 2090 Manufacturer : Unknown Type : BT 40 Rod diameter : 20 mm Insert height : 90 mm Pieces : 1

Tool holder Weldon BT40 2063/65 Manufacturer : Unknown Type : BT 40 Rod diameter : 20 mm Insert height :63/65 mm Piece :011

Stock number: D2009, Tabletop with sink, stainless steel,, sink 500 x 400 x H 180 mm., Table top L 2800 x W 650 mm., Material: Stainless steel AISI 304, Size: Table top L 2800 x W 650 mm.

Stock number: F940, Digital weight, stainless steel,, Mettler Toledo type PB8001-S., Weighing area 0-8100 g., Interval 0,1 g., Digital display,, stainless weighing plate Ø 180 mm., Printer., Material: Stainless steel AISI 304, Weighing area: 0-8100 g., Interval: 0,1 g.

Stock number: F938, Digital scale, stainless steel., Mettler Toledo, KCS300S., Weighing area 2-300 kg., Interval 20 g., Wall display with Tara function., Stainless weighing plate:, L 800 x W 800 x H 250 mm., Standing on wheels., Material: Stainless steel AISI 304, Weighing area: 2-300 kg., Interval: 20 g.

Stock number: F828, Digital scale, stainless steel,, mettler Toledo type PB 153., Weighing scale 0,02 - 151 g., Interval 1 mg., Tara function., Ø 100 mm. weighing plate., Material: Stainless steel AISI 304, Weighing area: 0,02 - 151 g., Interval: 1 mg.

Stock number: F1023, Digital floor scale, stainless steel,, Mettler Toledo type IND690 Desk and type KC600/40., Weighing area 0-600 kg., Interval 50 g., Weighing plate L 1000 x W 800 mm., Material: Stainless steel AISI 304, Weighing area: 0-600 kg., Interval: 50 g.

Stock number: F1022, Digital weight, stainless steel,, Mettler Toledo type PM30-K., Weighing area 0-32.000 g., Interval 1 g., Display with tara function,, stainless weighing plate 245 x 350 mm., Material: Stainless steel AISI 304, Weighing area: 0-32.000 g., Interval: 1 g.

Stock number: F1018, Digital scale, stainless steel,, Mettler ID1 Multirange with,, KB60 bench scale., Weighing area 0,5 to 60 kg.,, interval 10 g., Display with tara function,, stainless steel weigh area L 500 x W 400 mm., Material: Stainless steel AISI 304, Weighing area: 0,5 - 60 kg., Interval: 10 g.

Stock number: D1021, Digital scale, stainless steel,, Mettler Toledo, ID1., Weighing area 1-300 kg., Interval 20 g., With Tara function., Stainless weighing plate, 600 x 800 mm., Material: Stainless steel AISI 304, Weighing area: 1-300 kg., Interval: 20 g.

Stock number: D1018, Digital scale, stainless steel,, Mettler Toledo, ID5 with GD 46 printer., Range 1-300 kg., Interval 2 g., With Tara function., Stainless weighing plate, 600 x 800 mm., Material: Stainless steel AISI 304, Weighing area: 1-300 kg., Interval: 2 g.

Stock number: D959, Tabletop, stainless steel,, with suction grid. L 800 x W 500 mm., L 1200 X W 800 mm., Material: Stainless steel AISI 304, Size: L 1200 X W 800 mm.

Stock number: D957, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table top, Size: L 1680 x W 800 mm., Sink: L 500 x W 400 x D 200 mm., Other: With ventilation.

GUILLOTINE REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T

GUILLOTINE REEL SLITTER 35 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x17,5 Ton., No.2 pumps 30+30 lt/min, volume 21+21 ccm, Speed up: 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydrauliC pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer.

- approx. 17m² filter area - Compressed air cleaning of the filter bags - 40 hoses (each 900 mm long, 150 mm diameter)

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 80 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, Bale size LxWxH 1.100x720 mm (adjustable length), feeding hopper size : 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 5-7 Ton/h, - with 50 kg/m3 materials 9-11 Ton/h, - with 120 kg/m3 materials 17-19 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 25 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, oil tank capacity 950 lt., Machine weight ca.25.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen  ...

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 100 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, adjustable channel pressure, Bale size LxWxH 1.100x720 mm (adjustable length), Filling hopper size 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 10-12 Ton/h, - with 120 kg/m3 materials 18-20 Ton/h, 5 vertical-wire binding, upper and lower photocells to control material feeding feeding, Cycle with no material, no twisting : 22 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Baler weight ca.27.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic bind ...

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 120 Tons ca. pressing force, 90 kw drive, complete with oil heating and cooling, proportional pressure flow controller, Filling hopper 1.100 x 1.600 mm., Bale size LxWxH 1.100x720 mm (adjustable length), Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 11-13 Ton/h, - with 120 kg/m3 materials 19-22 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 21 ca, Pre-press flap with 2 x 26 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Machine weight ca 28.500 kg, oil tank capacity : 1.500 kg, General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen panel., A M ...

Tool holder SK40 × ER16 × 100 Manufacturer: Gühring /Heimer Type: ER16 Country of manufacture: Germany Weight: 1.08 kg Collet: ER16 Shaft length: 100 mm Condition: used Price plus VAT Pieces : 206

Offer 24338 Drawer cabinet with front door Specifications: - 1 lockable front door, 1 key available - 2 pull-out wheel-bearing drawers - 2 pull-out pull-out shelves / platforms - Load capacity of the drawers + shelves each approx. 100 kg - Pull-out of drawers + shelves 80% each - Platform dimensions approx. W 430 x D 610 x H 270 mm - Drawer dimensions W 450 x D 610 x H 50 mm - Front door in front of the pull-out shelves / platforms - Space requirement approx. W 580 x H 880 x D 700 mm - Weight approx. 80 kg

Work table packing table workbench with stainless steel top, rear upstand and 2x lockable containers RA1802 Work table made of metal, painted white, used worktop with stainless steel surface (traces of wear) Dimensions: Width: 2200mm depth: 600mm height: 775mm Lockable container with door (1x left, 1x right) Container in 2 different colors (turquoise and purple) Container dimensions: 300 x 410 x 550 mm (WxHxD) All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Knapp transfer roller conveyor Toothed belt slider 90° 2900/2270-710-650 RA2415 Make: Knapp Running direction: both directions Roller width (RB): 650 mm Nominal/outer width (NB): 710 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller spacing: 90 mm Frame height: 90 mm Drive section height: +250 mm downwards Distance between belts: 330 mm Belt width: 250 mm Number of accumulation positions: 5 Accumulation position size: 700 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 nominal voltage: 24V, 380-500V condition: Ausstellungsstück Conveyin ...

Knapp transfer roller conveyor Toothed belt slider 90° 2900/2270-510-450 RA2417 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 710 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller spacing: 90 mm Frame height: 90 mm Drive section height: +250 mm downwards Distance between belts: 330 mm Belt width: 250 mm Number of accumulation positions: 5 Accumulation position size: 700 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: nominal voltage: 24V, 380-500V Construction year: 2015 condition: Ausstellungsstück Conveyin ...

Tool holder Weldon VDI 80 50100 Pieces: 1 60120 pieces: 6 Manufacturer: EWS Type: VDI 80 Country of origin: Germany Price without VAT Piece:

Tool holder Weldon VDI 60 50100 pieces: 5 1090 pieces: 2 4087 pieces: 2 24100 Pieces:1 3090 pieces: 10 2570 pieces: 1 32100 Pieces:1 Manufacturer: EWS Type: VDI 60 Price without VAT Country of origin: Germany

Tool holder Weldon VDI 50 3296 Pieces: 1 25160 pcs: 1 12170 Pieces: 1 40130 Pieces: 1 Manufacturer: EWS Type: VDI 50 Price without VAT Country of origin: Germany

Tool holder Weldon VDI 40 10×80 Pieces: 12 3075 pieces: 2 4190 pieces: 3 4080 Pieces:2 3273 Pieces: 2 1375 Pieces: 12 1875 Pieces: 2 1668 pieces: 4 40120 pieces: 5 3095 pieces: 3 2475 pieces: 2 28/2775 Pieces: 2 1980 pieces: 10 3280 pieces: 5 667 pieces: 10 25150 pieces: 4 1865 pieces: 4 2580 pieces: 1 896 pieces: 1 Manufacturer: EWS Price without VAT Country of origin: Germany Condition: new

2 x die-sinking EDM machines ZK Genius 700 BJ 1010 and 2019

Universal tool milling machine DECKEL FP 1 With 3 axes active digital display Heidenhain TNC 123 Year of Make: 1994 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer 1 pc. machine vise 1 pc. counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm , 0 16 mm , 0 27 mm Various tool holders S 22 x 2 Bellows Z axis 1 chip protection Machine Light Automatic central lubrication pump Coolant Setup Operating instructions THE MACHINE IS IN TOP CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Univ. swivel, tilt and turn table presumably DECKELUniversal tool milling machine attachment tableTable size: 700 x 400 mmGroove width: 14 mmGroove spacing: 46 mmMounting plate: width 550 mm x height 300/240 mm- Swivel and tiltable +/- 30- Rotatable 360Weight approx. 140 kg; used

Graver grinding machine PARPAS type AUFabr. No. 854/36 Year of construction 1971Grinding wheel diameter 100 mmGrinding spindle speed approx. 3500 rpm. Motor power approx. 0.55 kWNetz connection 380 volts, 50 Hz- Socket for collets (system DECKEL with S20x2)- Collet 15.0 mm- Diamond grinding wheel dresser for the grinding wheel endSpace: L x W x H 700 x 350 x 450 mmWeight approx. 80 kgGood condition; used

Univ. swivel, tilt and turn tableAttachment table for Univ. tool barrel machineTable size 630 x 250 mmGroove width 14 mmRotatable and tiltable +/- 30Swivel +/-45- 4x T-grooveWeight approx. 120 kg; used

Steel grinding block, steel grinding machine ULRICH KLINGEL type HSM 4Year of construction approx. 1976with 4 workstationsGrinding wheel diameter: 1x 100; 1x 150; 2x 200 mmGrinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kWNet connection: 380 volts, 50 Hz- 3x swinging grinding table- all 3 workstations with swivelling tables, feeding movement via handwheel- one workstation (the 4th) with swivelling and tilting table, feeding movement via handwheel- 1 piece diamond grinding wheel 100 mm is mounted (heavily worn)- 2 pieces

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/16011 piece Punching bracket, punching unit for press brakeYear of construction approx. 1990Throat: 160 mmPunching capacity: 0.3 to 5 mm Material thicknessHole diameter: 2 to 7 mmInstallation height: 203 mm (only the punching bracket individually with punching tool)Installed is a round hole tool ø 5 mmPunching bracket distance: 195 mm- the tool unit was mounted on a hydraulic press brakeDimensions punching bracket base plate L x W x H: 2500 x 345 x 37.5 mmDimensions of punching bracket printing plate L x W x H: 2500 x 173 x

Tool presettler SOMET type SPS 500 UMash. No. S1-020 Year of construction 1987Table surface 545 x 1000 mmTravel distances X = 500 mm, Y = 340 mmWidth in the portal 550 mmHeight table - lower edge portal 250 mm- Portal longitudinal guidance on the right and left of the table- Adjustment via very fine threaded spindles with handwheel- Quick adjustment via electric unlocking- Projector screen 150 mm with crosshairs and coordinates MEOPTA PMP100- 2 pieces of clamping devices for tool measurement- on substructure with shelf and drawerSpace requirement L

Univ. Swivel, Tilt and Turn Table DECKELUniversal Tool Milling Machine Attachment Table suitable for FP 2L or FP 3L or FP 4LNr. 2314-0301 Year of construction: approx. 1975Clamping surface: 1000 x 520 mm- 6 clamping grooves 16 mm, distance 90 mm- Clamping plate can be rotated horizontally to the right and left up to 45 degrees- Tiltable from/to the machine +/- 15 degrees- Swivel +/- 15 degrees- Swivel table, tilting table, angle tablePermissible load max. 1000kgWeight: 400kggood condition; used

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. tool milling machine directly from one resolutionMilling machine DECKEL type FP 4Masch. No. 1/0687 Year of construction 1978Travel X: 700 mm, Y: 400 mm, Z: 450 mmTable clamping surface 860 x 500 mmSpindle holder SK 40 - M16Spindle speed 31.5 - 1600 rpm. 18 stepsQuill displacement horizontal and verticalMain spindle drive 4 kWNet connection 380 volts, 50 Hz- Digital display 3-axis HEIDENHAIN- Universal swivel-tilt turntable- Coolant device in the machine base- Machine vice- none

Stacker trucks, pedestrian stackers, hand pedestrian stackers LOGITRANS type LF 1001 / 1600Tool liftersSeries No: 051E04006100 Year of construction: 2005Load capacity: 1000 kg Lifting height: 1600 mmFork length: 600 mmPlatform size: 800 x 650 mmTotal length: 1200 mmTotal width: 800 mmOverall height: 1930 mm- Lifting via mechanical lifting hydraulics, pumping movement with the steering drawbar- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height.- Driving by pushing by hand- Fork stroke in the Single mast with free liftdead weight

CNC Univ. Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4Machine - Defect - without ControlMachine not ready for operation - electric without function - without CNC controlFabr. No: 03-02 Year of manufacture 19904 axes (X, Y, Z and R)Table clamping surface 1300 x 250 mmCenter width 700 mmCenter height 155 mmGrinding length (X-axis) max. 400 mmGrinding width (Y-axis) max. 260 mmGrinding spindle speed max. 6000 rpm. Grinding spindle drive 3 kWNet connection 380 Volt, 50 Hz, 25 Amp.- CNC control

Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x