136,488 used machines on RESALE, but how to find them? Machine Search
Max. cutting width: 920 mm • Max. cutting length: 920 mm • Max. pile height: 120 mm • Min. cut: 25 mm (without false clamp plate) / 90 mm (with false clamp plate) • Max. clamp pressure: 30,000 N • Max. cutting speed: 42 cuts/min • Front table length: 632 mm • Main motor: 3 kW • Power supply: 380 V, 3-phase • Drive: hydraulic
Max. speed: Up to 12,000 sheets/hour (or 165 m/min). Max. sheet size: 550 x 750 mm. Min. sheet size: 297 x 210 mm (210 x 210 mm depending on feeder). Max. die-cutting area: 530 x 730 mm. Min. die-cutting area: 55 x 65 mm. Stock weight range: Paper and cardboard from ~80 gsm up to 0.5 mm thickness. Tooling technology: Magnetic cylinders for flexible die plates (upper and lower). Drive system: Servo-motorized register control. Key functions: Die-cutting, kiss-cutting, creasing, perforating, embossing, and automatic waste stripping.
2 rotary tables Dimensions of the rotary tables: 2520x3550 mm Auction-ID: A1-50758-2
Technical data Manufacturer: SCHNEIDER MASCHINENBAU AG Designation: Face Cutter / Face Cutter 5 Year of Make: 1987 Working width: 1,800 mm Face Cutter Type: 3551 Machine Number: 515-1098 Power: 2.8 kW Voltage: 380 V / 50 Hz Table load: 300 kg Weight: 1,900 kg Configuration Automatic stacking: Type 3551, No. 515-1098 Automatic stacking: Type 3543, No. 514-1098, table load 300 kg, weight 2,000 kg Remarks Face cutting machine with automatic stacking and destacking. Auction-ID: A1-50608-1
Type plate not readable, with cross-cut saw unit ELUMATEC MG5-73, year of manufacture: 1994, sleeve roller guide, with feeding device, 2 chip extraction units Auction-ID: A1-50608-29
ESER E 925 Veneer Cutting Press Heavy-duty swing-arm cutting press for die-cutting veneer and similar sheet materials. Manufacturer: ESER Makina Sanayii Model: E 925 Year: 2017 Serial number: KKP 03 Power: 1.5 kW Electrical supply: 220–380 V Configuration: Manually adjustable upper cutting head, cutting table and separate electrical control cabinet Control cabinet: Marian Galád, type KKP 01, 2018, 400/230 V, 16 A, 50 Hz, IP55/20, 24 V DC-PELV control circuit Condition: Used Approximate dimensions: 1,400 × 1,100 × 1,700 mm Weight: 825 kg All descriptions are indicative only. Auction-ID: A1-50546-32
Technical data Manufacturer: SCHNEIDER ENGINEERING AG Type: S220 Serial Number: 74-1720 Year of Make: 2008 Working width: 2,200 mm Load capacity: 350 kg Machine weight: 11,000 kg Control: NUM, PC Configuration Small-format loading station: Type 2552, SN 1022-1720, YOC 2008 Large format loading station: Type 5553, SN 1021-1720, YOC 2008 Gantry robot: for destacking, with destacking station type 5544, SN 1020-1720, year 2008 Conveyor technology: Piece conveyor belt, conveyor width 2,000 mm; Hopper on chain conveyor belt, conveyor width 800 mm Security: Security fence and light barrier Remarks Used face cutting machine with extensive automated loading, stacking and conveying technology. Auction-ID: A1-50608-131
Technical data Manufacturer: POLAR MOHR / Adolf Mohr Maschinenfabrik Model No.: 155 EMC-MON Machine number: 5821247 Voltage: 380 V Current consumption: 17.9 A Frequency: 50 Hz Phases: 3 Power: 7.5 kW Configuration Control: 155 EMC MONITOR with control panel, monitor and numeric keypad Equipment: side support tables and protective cover Auction-ID: A1-50608-26
Machine equipped with a \"motor\" drum of Ø 2.35 m and 10 independent tensioning wheels, each with a Ø of 2.0 m. The space between the tensioning handwheels is easily adjustable, which allows the thickness of the slices to be sawn to be adapted according to the customer's needs. A guide drum is also installed on the \"tensioning\" side. Working hour: 22137h Auction-ID: A1-50758-7
General Description CNC profile and tool & cutter grinding machine manufactured by KELCH , model PFS 30-CNC . Designed for precision grinding of cutting tools, profiles and special tooling. The machine is equipped with CNC-controlled axes, a precision grinding spindle and a tilting workhead for versatile grinding applications. Technical Details Manufacturer: KELCH Model: PFS 30-CNC Machine type: CNC profile and tool & cutter grinding machine CNC-controlled axes Control: Bosch CNC Alpha with Bosch Alpha CRT Digital readouts: Heidenhain Control panel manufactured by Präzisionstechnik GmbH Tilting workhead Precision grinding spindle Precision workholding fixture Coolant enclosure Dust/coolant extraction system Condition Used industrial condition. The machine appears complete with Bosch CNC control, Heidenhain digital readouts, tilting workhead, precision grindi ...
ESER E 925 Veneer Cutting Press Used swing-arm veneer cutting and punching press for processing veneer and similar sheet materials. Manufacturer: ESER Makina Sanayii Model: E 925 Configuration: Swing-arm cutting head, cutting table and separate electrical control cabinet Electrical cabinet: Marian Galád, type KKP 02, production no. 2062018, 2018 Electrical specifications: 400/230 V, three-phase, 50 Hz, 16 A, IP55/20, 24 V DC-PELV control circuit Condition: Used Approximate dimensions: 1,400 × 1,100 × 1,700 mm Approximate weight: 825 kg All descriptions are indicative only. Auction-ID: A1-50546-33
Technical details Type: Universal tool and cutter grinder Configuration: - Universal swivelling grinding head - Adjustable workhead - Tailstock with centre support - Longitudinal precision worktable - Manual longitudinal feed - Belt-driven grinding spindle - Cup grinding wheel - Dust extraction connection - Manual handwheel controls Application: - Tool and cutter sharpening - Milling cutter grinding - Drill sharpening - Reamer grinding - Arbor grinding - Precision toolroom operations Construction: - Heavy-duty cast-iron machine frame - Manual universal grinding machine Dimensions: - Length: Approx. 1700 mm - Width: Approx. 1300 mm - Height: Approx. 1650 mm Weight: Approx. 1400 kg Condition: Used Observed condition: - Machine appears mechanically complete - Grinding spindle installed - Workhead and tailstock present - Longitudinal guideways appear intact ...
Technical details Manufacturer: Wickman Bennett Type: Universal tool and cutter grinder Configuration: - Universal swivelling grinding head - Universal indexing workhead - Precision grinding spindle - Secondary grinding spindle attachment - Reciprocating worktable - Adjustable indexing head - Precision handwheels - Wheel guard - Coolant system with integrated tank and pump - Electrical control panel - Machine work lamp Application: - Tool and cutter sharpening - Milling cutter grinding - Drill sharpening - Reamer grinding - Gear cutter grinding - Form tool grinding - Precision toolroom operations Construction: - Heavy-duty cast-iron machine frame - Manual universal grinding machine Dimensions: - Length: Approx. 1800 mm - Width: Approx. 1700 mm - Height: Approx. 1900 mm Weight: Approx. 2200 kg Condition: Used Observed condition: - Machine appears substant ...
General Description Automatic tool and cutter grinding machine manufactured by KOEBAU . Designed for precision sharpening and regrinding of milling cutters, drills, reamers and other cutting tools in production and toolroom environments. Technical Details Manufacturer: KOEBAU Machine type: Automatic tool and cutter grinding machine Automatic feed system Hydraulic components Mechanical workholding fixture Multiple guarded grinding stations Coolant and lubrication system Condition Used industrial condition. The machine appears complete with automatic feed system, hydraulic components, workholding fixture, guarded grinding stations and coolant/lubrication system. Operational status, spindle condition and grinding accuracy have not been tested. Auction-ID: A7-50745-26
Makita LW1400 Abrasive Cut-Off Saw Portable stationary abrasive cut-off saw for cutting metal profiles, tubes and bars. Manufacturer: Makita Model: LW1400 Year: 2016 Power: 2,200 W Cutting wheel diameter: 355 mm Electrical supply: 220–230 V, 10 A, 50–60 Hz No-load speed: 3,800 rpm Certification: CE marked Application: Cutting metal profiles, tubes and bars Condition: Used Approximate dimensions: 530 × 295 × 640 mm Approximate weight: 17 kg All descriptions are indicative only. Auction-ID: A1-50546-85
Execution: stainless steel, - Overall height: approx. 3.180 mm, - Overhang height: approx. 2.200 mm, - Base/plate for mounting: approx. 440 × 330 mm, - Electrical drive with geared motor, - Vertical guide with tipping mechanism, - Tray/slot for containers/crates, - Robuste Edelstahlausführung für den Einsatz in der Lebensmittelindustrie, - Electrical end position/position check, execution: stainless steel, Total height: approx. 3,180 mm, Dumping height: about 2,200 mm
control: FAGOR 8055 TC workpiece weight: 10.000 kg handwheel: inkl. Chip coveyor: inkl. centre height: 500 mm greates pass round over bed: 1300 mm Swing diameter face slide: 1000 mm centre distance: 5000 mm travel of cross-slide: 680 mm rapid traverse x + z axis: 8 m/min bed width: 900 mm spindle nose: DIN 55026-11 number of spindle speeds: 0-800 U/min/rpm spindle bore: 104 mm spindle diameter in front bearing: 180 mm turning speed range:: Anzahl 4 main drive: 37 kW Torque: 10.000 Nm : Sauter 300 x 300 diameter of quill: 180 mm quill stroke: 300 mm Height: BIS ZUR FLACHFÜHRUNG 805 mm total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m Equipment -4-jaw faceplate (independent jaws) Ø 800 mm -3-jaw faceplate (independent jaws) Ø 400 mm -Steady rest (4-point support) Ø 750 mm -Chuck guard -Full rear enclosure The data for this ad was ...
Offer 26219 Technical data: - Saw blade dimensions 3375 x 27 x 1.1 mm - Cutting speed infinitely adjustable 18 - 100 m/min - Hydr. Cutting pressure regulation - Hydr.- Lifting + lowering of the saw frame - Machine table left + right swivel for mitre cuts - Cutting area - at 90° around 255 mm - Square 240 mm - flat 300 x 180 mm - at 45° around 210 mm - flat 200 x 160 mm - at 60° left about 135 mm - Max. opening width of the vice 310 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 2000 x H 1500 x D 2100 mm - Weight approx. 990 kg with - Feed roller conveyor 5000 mm - Discharge roller conveyor with dimension stop 5000 mm
Voltage: 220 V, Rated power: 2.000 W, No-load speed: 1.500 rpm, Rectangular section cutting capacity at 0º: 158 x 80 mm, Square section cutting capacity at 0º: 100 x 100 mm, L-section cutting capacity at 0º: 110 x 110 mm, Rectangular section cutting capacity at 45º mitre: 85 x 85 mm, Square section cutting capacity at 45º mitre: 85 x 85 mm, L-section cutting capacity at 45º mitre: 85 x 85 mm. 2023 Auction-ID: A1-50595-10
Power supply: 380V, 3 ph, 50-60 Hz, Spindle speed: 2810 RPM, Total power: 1,8 kW, Air pressure: 6-8 bar, Air consumption: 41 lt/min, Min. processable profile length: 100 mm, Saw blade outer diameter: Ø400 mm, Maximum saw blade height: 140 mm, Saw blade bore diameter: Ø32, Saw blade thickness: 4,2 mm, Number of teeth: 120, Conveyor: Length: 500 + 300 cm / Width: 35 cm. Year 2012 Auction-ID: A1-50595-26
Brand BODOR Model/ Type i5 Machine Type: CNC Fiber Laser Cutting Machine Laser power 3,000 W / 3 kW Work table 1,500 × 700 mm according to quotation Max. cutting area 700 × 1,500 mm according to supplied machine specification Positioning accuracy X/Y 0.05 mm Repeatability X/Y 0.03 mm Max. travel speed X/Y 60 m/min Max. acceleration 1.5 G Max. table load 250 kg Machine dimensions 2,980 × 2,220 × 1,970 mm Own weight approx. 2,000 kg Control BodorPro 2.0 Operation 21.5\" touchscreen Cutting head BodorGenius autofocus Cooling CW water chiller / water cooling Servos Yaskawa, Japan Electrical Components Omron, Japan Taiwan Square Rail Guide Drive Taiwan ball screw Lubrication Automatic Extraction Integrated exhaust system Remote control WiFi wireless control Housing Fully enclosed protective cover Special function Scan Cut for highly reflective materials CE/TÜV documentation available Auc ...
Power supply: 220 VAC, 1 ph, 50-60 Hz, Spindle speed: 2860 RPM, Motor power: 1,5 kW, Air pressure: 6-8 bar, Air consumption: 10 lt/min, Saw blade outer diameter: Ø400 mm, Saw blade bore diameter: Ø32 mm, Saw blade thickness: 4 mm, Number of teeth: 120, Min. processable profile length: 350 mm, Conveyor: Length: 3000+3000 mm / Width: 200 mm / Adjustable height / Both sides. Auction-ID: A1-50595-13
Power supply: 380V / 3 ph / 50-60 Hz, Rotation speed: 2810 rpm, Total power: 2,2kW, Air pressure: 6-8 bar, Air consumption: 45 lt/min, Min. processable profile length: 450 mm, Saw blade outer diameter: Ø600 mm, Maximum saw blade height: 215 mm, Saw blade bore diameter: Ø32, Saw blade thickness: 4,2 mm, Number of teeth: 120, Conveyor: Length: 300 cm / Width: 30 cm / Adjustable height / Both sides. Auction-ID: A1-50595-2
Power supply: 380V, 3 ph, 50-60 Hz Spindle speed: 2810 RPM Total power: 1,5 kW Air pressure: 6-8 bar Air consumption: 41 lt/min Min. processable profile length: 100 mm Saw blade outer diameter: Ø350 mm Maximum saw blade height: 100 mm Saw blade bore diameter: Ø32 Saw blade thickness: 3,8 mm Number of teeth: 120 Conveyor: Length: 4000 mm / Width: 350 mm / Both sides. Auction-ID: A1-50595-42
The lawn mower for the Mini Loader is a hydraulically driven mower for maintaining lawns, parks and roadsides. The direct hydraulic drive transfers the power to two blades. Four support wheels support the mower while working. The cutting height is adjustable, so that the mower can be adjusted to the terrain and the desired cutting pattern. Mower is equipped with a mounting plate with Euro connection! Auction-ID: A3-46134-11586
This 3-axis AMADA FOL 3015 NT was manufactured in 2006. It features an impressive X-axis travel of 3420 mm, Y-axis travel of 1550 mm, and Z-axis travel of 200 mm. The machine is equipped with a powerful 4500 W laser source and includes a side pallet loading system, FANUC AF4500E CNC control, and an industrial extraction system. If you are looking to get high-quality laser cutting capabilities, consider the AMADA FOL 3015 NT machine we have for sale. Contact us for further details.
turning length: 1000 mm turning diameter over bed: 430 mm turning diameter over slide rest: 235 mm spindle turning speed range: 11.2 - 2.000 U/min spindle bore: 56.0 mm morse taper: 4 MK quill stroke: 135 mm bed width: 333 mm spindle taper: DIN 55022 Gr. 6 total power requirement: 7.75 kW weight of the machine ca.: 1950 kg From a maintenance workshop Good condition () Features: - Heavy-duty, robust conventional lead/feed screw machine - 3-jaw chuck, Ø 250 mm, including replacement jaws - RSF Elektronik digital display Type Z735 - MULTIFIX tool holder, with 5 inserts - FINN SAFETY foldable chuck guard Type SPS 400 - Sliding tailstock Includes RÖHM rotating center point - Freely adjustable machine lamp - 1x chuck key - Chip guard - Sliding bed stop - Coolant system with drip pan The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1000 mm, 1 mm
used CoilTec cross-shear, with hold-down and unwinder, mobile, with connection pockets to the Modular workbench, spout height 965 mm Note: Sheet metal infeed only possible from the left! Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working width: 1000 mm Sheet thickness max. steel: 1.00 mm Weight: 120 kg Colour: anthracite grey/orange Dimensions::1320 x 1500 mm Coil weight: 250 kg
max. turning length: approx. 800 mm, centre height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, Fabr. ELESTA, type: VISULESTAIIE, with multifix steel holder, magnetic chuck, coolant device, splash guard and machine light as well as various machine accessories
Key data: 250 mm, 2240 U/min
max. turning length: 1000 mm, center height: 250 mm, hollow spindle diameter: 60 mm, max. speed: 2240 rpm, with 3-jaw chuck, Fabr. SCHUNK, type: ROTA-S-PLUS, diameter: 250 mm, with machine light, steady rest and Multifix steel holder
Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact Auction-ID: A1-40324-125
! Pay attention to 1 module of the source is defective, so the machine can currently only deliver 3 kW. Operating hours: 62853 hours Cutting hours: 13639 hours. Auction-ID: A1-47365-260
Engine: 224 cc 4-stroke petrol engine Cutting width: 53 cm Maximum range: Controllable up to 600 meters away Fuel tank: 1 litre Consumption: Approximately 0.7 liters per hour Maximum Inclination: Up to 45 degrees Maximum speed: 3 km/h Cutting height: Adjustable between 3 and 12 cm Control system: Remote control via wireless transmitter, with a range of up to 600 meters Design: Robust and suitable for slopes up to 45 degrees Ease of use: Easy operation and adjustability for optimal mowing results Safety: Incl. emergency braking and obstacle detection for safe use on steep slopes Remote lawn care, without physical presence Auction-ID: A1-40324-112
Router depth 80cm, equipped with counter weight 1500kg. Auction-ID: A1-47393-112
Cuts fillets into portions by weight, The Marel IPM3 X300 is a portion cutter for fish, chicken and meat fillets. Each piece is scanned on the belt, and the machine works out where to cut to get portions of a fixed weight or length. You get more out of every fillet with less trim left over., The machine was built in 2005 and has a perforated belt 280 mm wide. Settings are made on the control panel with a colour screen., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/marel-ipm3-x300-portion-cutter/, Type: Portion cutter (fixed weight or fixed length), Products: Fish, chicken and meat fillets, Belt: Perforated, 280 mm wide, Scanner: Cameras with laser line, Controls: Control panel with colour screen, Electrical: 3 x 380–480 V, Construction: Stainless steel
Used Urschel cutting machine, built entirely in stainless steel, This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine., The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/urschel-cutting-machine/, Type: Cutting machine, Infeed: Hopper, Drive: Electric motor with belt drive, Controls: Own control box on the machine, Construction: Stainless steel, on castors
maximum number of results exceeded
please refine your search
500 € 
