cut size used for sale

Thread cutting machine with Stehler jaws, thread cutting head -Hole diameter: 190 mm -Size: 1/2 - 2 inches -Weight: 130 kg

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter -inch thread: 1/2-2 inch -Weight: 15 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1/2- 2 inch -Packaged: in contact -Weight: 15 kg

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dowson bread slicer Model: B51C Fully automatic bread slicer, Constructed to handle a variety of loaves, up to 100 loaves per minute, comes with two different cutting heads, overall length 2800mm, 3Ph

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1/4-1 1/2 inch -Weight: 8 kg

- technically efficient, ready to work – after full service - 6 spindles - automatic - variable angle lower spindles - spindle top 90 degrees

Thread cutting head with Stehler jaws, thread cutting die -inch thread: 1/2-3/4-1 inch -Weight: 5 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1/4-1 inch -Weight: 5.5 kg

Machine Details Warehouse number 1105-03364 Machine type lead and pull spindle lathe Make CAZENEUVE Type HB 525 X 1000 Year of construction 1965 Conventional control type Storage location HAGUENAU Country of origin France Delivery time Immediate Freight base EX WAREHOUSE Technical details Turning diameter over bed 500 mm Turning diameter via support 220 mm Turning length 1000 mm Spindle speeds 25-2000 rpm various accessories YES Information IN GOOD WORKING CONDITION LOT OFF ACCESSORIS WITH MULTIFIXE TOOL HOLDER SYSTEMS

cutting range for steel to: 76 mm capacity at 100%: 51 mm cutting medium: 400 Amp regulated drive: 50-150 und 100 - 400 AmpSteuerSteuer control voltage: 24 Volt weight of the machine ca.: 750 kg dimensions of the machine ca.: 82 x 122 x 930 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HEIDELBERG Nela plate punch Suitable for HD SM 52 / 74 /102 and XL machines Hole spacing: 425 mm and 780 mm Various year of manufacture models available

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1-2 inch -Weight: 1.5 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1/2-3/4 inch -Weight: 4.5 kg

Gebr. Wabäma Circumat Elektronik 380.260, with circular knife, 1.5 kW, machine no. 04020665

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1/4-1 1/2 inch -Weight: 14.5 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1 inch -Transport crate -Weight: 8.5 kg

Radius cutter, milling cutter -Finishing cutter -1x Diameter: 84 mm Height 44 mm R12 mm -1x Diameter: 102 mm Height 53 mm R15 mm -1x Diameter: 114 mm Height 70 mm R20 mm Type: HSS Quantity: 3 pieces -Sale: only complete set -Weight: 5.4 kg

Plasma cutting "CR" 6000x2500 with two Hyperterm HT 2000 and HD 3070 generators complete with filter

3000x1500mm

4000 x 2000mm 4000w LOW HOURS

Tube laser Bodor T230 Laser power: 1 kW Round tubes 20 mm to 230 mm Square tubes 20 x 20 mm to 160 x 160 mm Cutting of welded assemblies Year of construction 2017, but installed and put into operation in 2018

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -Grinding discs: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg

multifunctional equipment that allows self-adhesive materials and labels 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and gravure unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls Chiller Working hours 8872 Year of production 2006 more information on request

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1- 2 inch -Weight: 6.5 kg

Link pipe cutter, pipe cutter -cutting pipe diameters: 80 - 200 mm -The number of links allows the device to be adjusted to the desired pipe diameter. -steel cutting wheel -Ideal for working in trenches -Transport case -Weight: 11 kg

A used bread slicer Treif Pegasus 2602 from 1997 is currently for sale and immediately available in our warehouse in Bielefeld. Bread slicer Treif Pegasus 2602 - Bread slicer without oiling - for long loaves of bread - completely in stainless steel - with cress knife - can be driven on castors - Year of construction 1997

Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blade: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Graef Euro 2250 Knife diameter 220 mm Cutting height 155 mm Cutting length 220 mm Cutting thickness 3-15 mm Tabletop unit Footprint 460 x 320 mm Stock: 50 pieces

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -Replacement jaws: 4 -inch thread: 1/2-2 inch -Transport crate -Weight: 16 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread jaws: 1/4 - 1 1/2 inch -Weight: 8 kg

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread jaws: 1- 2 inch -Weight: 12 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter -inch thread: 1/2-3/4 inch -Weight: 6 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter -inch thread: 3/8 - 1 inch -In the transport case -Weight: 5 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1 - 2 inch -Transport crate -Weight: 11 kg

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1 - 2 inch -Transport crate -Weight: 17 kg

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1999 -Dimensions: 600/600/H1300 mm -Weight: 50 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 2 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Treif bread slicer Type: Pegasus Sichelmesser Machine Cutting width: 4 – 14 mm adjustable analog control Stainless steel cladding 380V 50Hz Height: 120cm Width: 100cm Depth: 80cm

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

Rego Herlitzius Roto Shop DL Circular knife machine Stainless steel version mobile Knife reground and coated manual operation via rotary knob Cutting width 3 - 16mm Connection 400V, 16A-CEE plug Bread shaft: 40 x 23 cm Dimensions: 1000 x 700 x 1050 mm, WxDxH Cleaning machine

Slicing bread Ipeka MC easily replaceable blade system; efficiency depends on the consistence and size of the product; slicer’s speed: up to 4000 pcs/h. voltage: 400 V, 50 Hz, 3-phase

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

fully automatic cake cutting machine Krumbein Type: KSSM 3.0 D for cutting 60x40cm and 60x20cm sheets long and cross-section 60 x 40 cm sheets digital control Siemens Piece size individually adjustable removable knives easy cleaning incl. accessories

Wabäma Bread Slicer Sichelmesser Machine Cutting width: 4 – 20 mm adjustable digital control Stainless steel cladding 400V 50Hz Height: 110cm Width: 100cm Depth: 70cm