cut off saw used for sale

Number of motors: 1 Stück 0: , mm Control: , 0 cutting width: 115 und 82 mm Cutting height: 55 mm Motor output: 2.0 kW machine weight ab.: 45 kg Graule KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----------------------------------------------- Brief manufacturers description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----------------------------------------------- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Ma ...

Year & Manufacturer: 1990 — EIMA Maschinenbau GmbH Dimensions (mm): 3200 × 3600 × 1500 Power supply: 380/220 V – 50 Hz Power: 10.75 kW Auction-ID: A1-50001-26

Graule ZS170N 3D – with NC controlled tilting & swivelling Manufacturer: Graule – with Tigerstop NC-control Type: ZS170N – with Tigerdrive control (tilting & swivelling) M-Nr.: 2014/78/27 Year: 2014 Graule ZS170N Motor: 3 kW Saw: ø420 mm As zaagblad: ø40 mm Cutting height: 170mm Swivelling: 45° – 90° – 25° Tilting: 0° – 45° Stroke: 450 mm – 90° 310 mm – 45 ° Saw: ø420 40 48 WZ Neg. (used) Machine stand: Inclusive

OMGA T55 300: 3 pcs. for sale Manufacturer: OMGA Type: T55 300 Year: 1990-10 M. Nr.: 199899 Max. saw height: 75mm Max. saw length: 135mm Saw diameter: ø300mm Diameter zaagblad as: ø30mm Motor: 1,2 kW Speed: 3000 tpm Dust extraction: 80 Condition: Functionel tested

Table machine RMH 52 for peeling cables. 18 meters per minute, 230 V Diameter of cable: 1-52 mm

Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm

Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm

Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm

This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.

This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min

This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg

McIntyre Euro-strip 500 Cable Stripper The perfect bench-top cable stripper. Compact and efficient The Euro-strip 500 is one of the smallest in the range and is a low energy, large capacity unit that is easy to move around a yard. The Euro-strip Cable strippers are designed for simple, dependable operation without the need for constant adjustment, which suits all different material sizes. Taking up minimal space and emitting very low noise, the Euro-strip 500 will prove to be a valuable addition to your business.

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.

DEMONSTRATION MACHINE Cable cutting machine Maxi 100 Manufacturer: Grimo Diameter cable: 6 - 100 mm Separation speed: 40 meters per min Dimensions (L x W x H): 700 x 700 x 1270 mm Weight: 165 kg Drive: 2.2 kw / 400 V Knife adjustment: mechanical

Recycling machine trade AGICOM- Pedergnana OG: Cable peeling machine MAXI 100 DEMONSTRATION UNIT The compact MAXI 100 cable peeling machine can be used to process cables with a diameter of 6 mm to max. 90 mm. Thanks to the tried-and-tested two-knife system, the cable insulation is cut open and the copper or aluminium core can be easily removed.

Auction-ID: A1-49606-752

turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schneider guillotine shears, steel shears up to 2000mm

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

tool clamping area: VDI 50 mm weight: 0,5 t palett with 19 pcs. turning tool holder + 19 pcs. turning tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 3.000 mm control: FAGOR 8055 TC/B turning diameter over bed: 470 mm spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter: 150 mm spindle drive: 17 / 20,5 kW total power requirement: 28 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chucking diameter: 250 mm workpiece dia.: 200 mm control: Siemens 840 D sl c-axis: Position genauigkeit arcs 10 tool turret with 12 work positions: 12 turning spindle: 2 spindle turning speed range: 6.000 / (4.500) U/min Spindle power: 26 / (28,3) max. torque on the spindle: 150 / (300) spindle nose: 55026 - A6 tool taper: VDI 40 turning speeds: 10.000 U/min z-travel: 370 mm x-travel: 30 mm y-travel: +- 40 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 460 mm turning length: 795 mm control: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mm spindle passage: 80 mm Traverse X/Z:: 260/795 mm Number of working hours: 19.552 h Cutting time: 10.704 h spindle drive: 18,5 kW total power requirement: 40 kVA weight of the machine ca.: 6,4 t dimensions of the machine ca.: 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A fully automatic Cleveland CNC cut-off and face grinding machine for carbide and HSS bars is available. Grinding spindle speed: 2000rpm, max. cut-off wheel diameter: 200mm, workpiece diameter range: 3mm-32mm, max. workpiece length: 500mm, length accuracy: +/-0.02mm, face runout accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 1900mm/1200mm/2400mm, weight: approx. 1700kg. Documentation available. An on-site inspection is possible.

control: GE Fanuc Series 21i-T Distance between centres: 5000 mm center bore: 425 swing over bed: 850 mm bed width: 425 mm rapid feed: 10000 mm/min working feed: 7000 mm/min main spindle bore: 85 mm Main spindle: DIN 55027-n°8 taper: 5 spindle speeds: 0-2000 U/min Spindle power: 11 KW tailstock quill diameter: 96 mm tailstock travel: 215 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 7.300x1.700x1.900 m Support Guides 2 Swing over cross carriage 560 mm. Automatic ranges 2 Turret type Automatic Turret positions 8 Hydraulic tailstock quill stroke INCLUDED Tailstock taper MORSE 6 3 Jaw Auto-centering hydraulic chuck Ø 300 mm. INCLUDED 4 support steady rest Ø 450 mm. INCLUDED 3 support steady rest Ø 250 mm INCLUDED Chuck protection INCLUDED Complete rear protection INCLUDED Dual handwheel for carriage control INCLUDED Foot pedals for hydraulic chuck operati ...

: ja : VDI 20 : number: 3 Stück im Paket : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1.300 mm turning length: 3.000 mm control: FAGOR 8055 TC/C swing diameter over slide transversal: 940 mm feeds: X /Z 8.000 mm/min c-axis: Inkl. speeds:: 0 - 800 u/min transmission ratio: 4 spindle nose: DIN-55026-B11 : 46 kw spindle passage: 104 mm max. workpiece weight between centres: 13.000 kg chip conveyor: Inkl. total power requirement: 50 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7.925 x 2980 x 2585 m Turret positions 8 Turret type VDI 50 (Ø 470 mm) Driven tool power 5.5 kW Tailstock Tailstock quill diameter 180 mm Tailstock quill stroke 300 mm Additional equipment 3-jaw universal chuck Ø 900 mm 3-point steady rest Ø 750 mm 3-point steady rest Ø 400 mm 2 axial driven tool holders 1 radial driven tool holder 20 VDI 50 tool holders Air-conditioning unit for electrical cabinet Portable handwheel High-pressure coolant  ...

turning diameter: 420 mm turning length: 3.123 mm control: MORI SEIKI MSX-850III turning dia. over bed: 995 mm swing diameter over slide transversal: 825 mm dist. between centers: 3.200 mm x-travel: 280 mm z-travel: 3.170 mm feeds: X.Z 30.000 mm/min spindle nose: JIS A2-8 turning speeds: 3.000 U/min spindle passage: 105 mm forward bearing diameter: 160 mm spindle drive: 28 kW Torque: 3.365 Nm turret head: pos. 12 tail stock: weg tailstock quill diameter: 150 mm quill stroke: 150 mm tailstock taper MT: MK 5 total power requirement: 54 kVA weight of the machine ca.: 13,5 t dimensions of the machine ca.: 8.147 x 2.58 x 2.390 mm Equipment - Hydraulic 3-jaw chuck Ø 400 mm - Chuck type SCHUNK THW 400-120 - Quick jaw change system for chuck - Hydraulic steady rest SHW type SLU-3.2-ZS - Steady rest capacity 50–200 mm - CNC longitudinal movement of steady rest (A-axis) - Automatic tool me ...

turning diameter: 255 mm turning length: 500 mm control: FANUC 31i model B Drive tool: 18Kw spindle drive: 15/11 und 7,5/5,5 kW rapid traverse Z-axis: 20 m/min rapid motion - y-axis: 12 m/min rapid traverse X-axis: 16 m/min rapid traverse X-axis: 16 m/min spindle nose: A2-8/A2-6 bar material dia.: 66 mm centre distance: 639 mm Chip coveyor: swing dia.: 270 mm total power requirement: 65 kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: 2,85 x 2,2 x 2,05 m -Two 12-station turrets (24 positions total), each with 12 driven tool stations -Y-axes on both turrets -Sub-spindle travel: 635 mm -Sub-spindle rapid traverse: 30 m/min -Travel – X (Turrets 1 & 2): 190 mm -Travel – Y (Turrets 1 & 2): ±40 mm -Travel – Z (Turrets 1 & 2): 500 mm -Spindle speeds – infinitely variable (S1 / S2): 4,000 / 5,000 rpm -Spindle bearing diameter: 120 / 100 mm, C-axis: 0.001° -Turret 1 s ...

dist. between centers: 6.000 mm greates pass round over bed: 1.200 mm swing diameter over slide transversal: 1.000 mm rapid traverse feeds: X/Z 10.000 mm/min guideways: 4 St. cross travel: 530 mm centre height: 600 mm control: FAGOR 8055 TC : main spindle speeds:: 20-1.600 U/min main drive motor: 42 kW spindle passage: 150 mm transmission ratio: 2 Turret: DUPLOMATIC Revolver station: 8 tools dimension: VDI-50 tail stock: tailstock quill diameter: 180 mm total power requirement: 61 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 11.210 x 3.700 mm Equipment C-axis + live tooling Ø 800 mm 4-jaw independent chuck 3-point steady rest, Ø 50 -500 mm 3-point steady rest, Ø 50 - 520 mm 3-point steady rest, Ø 480- 930 mm MORARI hydraulic self-centering steady rest, capacity 50 - 315 mm MORARI hydraulic self-centering steady rest, capacity 280 - 540 mm Motorized tailstock V- ...

Format: 740 x 1040 mm<br><br><br><br>br>Verf Gbar: Short-term

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

1 roller movement: Machines No.: 0018 Drawing No.: 242 002 54 Roller speed length: 4 m Roll width: 300 mm Mounted with ball bearing rollers on profilesteel frames Drive by special gear motor Precision roller chain Spring-loaded length compensation 1 pull-off cross conveyor: Machine number: 0037 Drawing number: 147 501 46 Axle distance: 6.5 m Rank: 3 3/4" chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross conveyor: Machines No.: 0038 Drawing No.: 147 501 47 Axle distance: 6.5 m Rank: 3 3/4" Chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross c ...

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

4-color format: 212 x 360 mm<br><br><br>Still in operation: Yes<br>

<br><br><br><br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

size 740 x 1040 mm<br><br><br><br>Available: short term

20pcs new rollers for HEIDELBERG SPEEDMASTER SM102

Large items of office furniture includes: -Tables and cabinets made of wood -Tables and cabinets made of steel/plastic In very good condition!