126,677 used machines on RESALE, but how to find them? Machine Search
used
Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.
Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.
From insolvency: Avola ZB 400-5 Year of construction 1996 No.51809 380 volts 130mm cutting height Saw blade 400mm Table size approx. 1030x740mm
Key data: 360 mm
Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--
Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317
- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head
Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...
Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg
Vertical Trend and Slit Band Saw Fabr. Raimann Type B 11 Built in 1983 Roller diameter 110 mm Roll width 100 mm Speed -580 rpm Engine 18.5 Kw Cutting width R/L of sheet-200 mm each Cutting height 200 mm Feed continuously variable 10-40 m/min 1.5 kw Band saw blade length 6300-6500 mm Electro-motor blade clamping Pneumatic roller slide adjustment
Key data: 400 mm, 180 mm
Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.
Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates
ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...
Driven heavy roller conveyor for a gang saw, band saw Machine dimensions: total length 8300 mm, width 1800 mm, roller width 1600 mm, height roller of floor 580 mm, Roller Number 11 pieces Gear motor Power 2 kW/1400 rpm Total weight 2000 kg. As good as new
Semi-automatic, double-sided vertical - mitre band saw Miter angle: 30°-90°-30° Material tension: hydraulic Saw bracket feed: hydraulic Lifting strap: back/hydraulic Speed: 15-100 m/min Strap dimensions: 4730 x 34 mm 45°: Round 330, Square 330, Rectangle 420x330 mm 30°: Round 240, Square 240, Rectangle 420x240 mm Angle +/- 30 (60) degrees, Saw feed hydraulic, Material tension hydraulic to the left and right of the saw blade, Stirrup guide on backlash-free and low-maintenance guide systems, Automatic adjustment of the stirrup feed stroke to the material diameter, Automatic angle positioning via Wago control with preset counter for any angle from -30 (60) to +30 (60) degrees, height adjustment of the upper belt guide hydraulic, minimum quantity spraying device (option)
Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230
Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100
Multi-blade circular saw Raimann, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Morsoe mitre punch, various, in good condition, immediately available. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Machine: joining, veneer cutting machine Brand: Langzauner Type: LZ 4/2E 3.050 Year of Make: 1998 CE Specifications: Working length: 3,050 mm Cutting height: 45/55 mm Motor power: 2.2 kW each Suction duct: Yes Support table rear: Yes, 3,050 x 500/800 mm, with hinged insertion shoes for stop depth 800 mm Rear Rip Fence: Yes, 650/ 800 mm, incl. digital display Rack & Pinion Balancing: Yes Milling unit: Yes Front support table: Yes, movable Saw carriage feed: via electric motor drive and Stepless speed control
Metal Band Saw Saw blade welding machine, grinder Swivel table 380 V 16 A Electrics must be checked. Saw Blade Compressor for air blowing.
Table saw Altendorf TKR 45 (Ref. No. 183-2712) with spec. Stroke, digital display/operation max. saw blade diameter 450 mm Built in 1990 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
Panel Saw Scheer Type: PA 7004 Year of Make: 1999 Cutting length 4200 mm with automatic lift table loading with cutting optimization software Full formats 2800 x 4200 mm and half formats 2800 x 2070 mm were processed
MACC Metal Band Saw Special 411 CSO Aut. Lowering Section cap. round up to 300 mm 2 speeds 38 + 77 m/min. Motor 1.6 kW, 400 V incl. machine base Weight approx. 530 kg
Offer 24272 Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting area - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm
WEIBERT WJ-K315-A new Sliding table saw The original Weibert sliding table saw should be it! Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!
for sale MACC Metal Circular Saw NEW 300 E HSS Circular Saw Blade 300 mm Schnittkep. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 150 kg Machine base can also be purchased. Further models and inquiries to FSA Maschinen AG
WEIBERT WJ-K315-A new Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!
Motor 1.3 kW/400 V/50 Hz/3 A, swivel -20° to +70°, pneumatic clamping, suction nozzle 80 mm
Aluminium saw with a cutting length of up to 600 mm with hydro-pneumatic feed Pneumatically adjustable angle between 45° and 90° Pneumatic material tensioners Suction Max. saw blade diameter: 500 mm
FOSHAN LX-425 metal circular sawing machine was built in 2019 by the Chinese company Foshan Nanhai Longxin Machinery Co., Ltd. The machine designed for precision cutting of workpieces at a fixed angle of 90° performs the machining process (from loading to the workpiece cutting itself) fully automatically, thanks to the provision of a bar feeder with magazine. The machined workpieces have a smooth surface without any burrs or distortions. In addition, the ability to cut more than one piece of material (bundle) makes the FOSHAN sawing machine an excellent choice for mass production. To this date, the FOSHAN LX 425 circular sawing machine has cut bundles of 4 brass tube profiles into suitable lengths. Technical specifications of the FOSHAN LX-425 tube cutting machine - cutting angle: 90° - cutting disc diameter: 300 mm - cutting disc bore: 32 mm - cutting disc rotational speed: 42- ...
AUTOMATIC MULTI RIP SAW model KUANG YUNG MRS 350 - TAIWAN cast iron machine structure CE regulation: YES with instruction booklet and CE declaration of conformity electric lifting pressure unit automatic lubrication of the carpet Technical details : max.height of cut mm.135 max.working width mm.350 minimum length of cut mm.650 max.diameter of blades mm.405 min.diameter of blades mm.300 arbor sleeve mm.70 main motor power Hp 50 feed motor power Hp 2 motor power lifting pressure group Hp 1 arbor speed rpm 3000 variable carpet advancement speed. from 7.3 to 30 m/min. net weight kgs.2400 volt. 380/50
AUTOMATIC DOUBLE MITRE SAW model OMGA TR 2B N oleo second hand machine in Excellent working condition , like new for cutting wood, frames, pvc, aluminium, plastics and various materials CE compliant machine: YES oil pneumatic downstroke of the blade groups alternate or simultaneous blade descent inclination of cutting blade groups + / - 45° bimanual control from the control panel n.02 motors . power Hp 3 each one blades diam. mm. 350 max. useful cutting length mm.2800 min. useful cutting length mm.320 max. useful cutting width 90° mm. 170 x 102 H max. useful cutting width 45° mm. 110 x 102 H volt. 380/50 weigth kgs. 600
Motor 1.5 kW/400 V/50 Hz/16 A, table 450x500 mm swivel 45°, wheels saw blade 400 mm, belt guide bottom+top, max. saw height 225 mm, rip fence 450x90 mm, suction nozzle 100 mm, incl. saw blades 2 pcs. 10 mm and 3 pcs. 20 mm, bearings of motor and impellers have been renewed, control and drive belts have been renewed
MACC Metal Circular Saw K 225 Cutting capacity round up to 65 mm Saw blade 225 mm Vise opening 75 mm Speed 52 rpm Motor 0.75 kW, 230 V Weight approx. 32 kg
MACC Metal Circular Saw NEW 315 E HSS Circular Saw Blade 315 mm Section cap. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 170 kg Machine base can be purchased
MACC Metal Band Saw TRS 275 Saw blade Ø 275 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, but can be purchased separately.
MACC Aluminium Circular Saw TA 400 TCT circular saw blade 400 mm Section cap. up to 140 mm round Coolant pump Attack Speed 3000 rpm Motor 2.2 kW, 400 V incl. machine base Weight approx. 160 kg
MACC Metal Circular Saw NEW 250 Saw blade Ø 250 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, can be purchased separately.
Key data: 220 mm
MACC Metal Band Saw Special 280 CSO Section cap. up to 220 mm round Speeds 32/66 m/min. Coolant pump Attack Motor 2-stage 400 V incl. machine base Weight approx. 230 kg
MACC Metal Circular Saw TRS 315 HSS Circular Saw Blade Diameter 315 mm Double vise, Opening up to 120 mm, Quick release defective mitre cuts left/right up to 45° 2 speeds
ALDURO Metal Band Saw MBS-181 Lowering of the saw arm selectable hydraulic or manual Section cap. round up to 180 mm Motor power 2 kW, 400 V Swivel saw arm 60° L / 45° R Vise opening up to 230 mm incl. coolant device and machine base Weight approx. 195 kg This saw is also optionally available with a 230 V motor
Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg
Year: 2020 - technically efficient, ready to work - after full service - automatic feed - disc diameter: 400 mm - cooling system - disc rotation 45/90/135° and tilt 45° - vertical and horizontal pneumatic pressure - compressed air preparation station
Max. saw blade diameter: 350 mm Manual material tensioner Minimum quantity spraying Digital angle display
Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550
Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER
maximum number of results exceeded
please refine your search
