126,698 used machines on RESALE, but how to find them? Machine Search
MAX TRUNK DIAMETER 700 MM SUBSTRUCTURE LENGTH 6000 MM CUTTING LENGTH OF 4.8 METERS 5.5 KW MOTOR HYDRAULIC BELT TENSIONING
MAX TRUNK DIAMETER 1200 MM - CUTTING LENGTH 7800 MM - 11 KW/15 HP ENGINE - PRE-CUTTING AGGREGATE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 400 V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - horizontal / vertical cutting head spacing in one cut - 1150/280 mm - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,800 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 1200 by turning
MAX TRUNK DIAMETER 850 MM - CUTTING LENGTH 7800 MM - 7.5 KW/ 10 HP ENGINE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 380V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,010 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 850 by turning
Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer wi ...
Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the carriage end. Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up ...
Description: FRIGGI Band Saw 2MF650 ACN Details: Type 2MF650 ACN Serial number 2511 Year of construction 1997
Saw blade 12 pieces -Various sizes -From: Ø 125 mm to: Ø 180 mm -Package: complete -Weight: 7 kg
Aluminum circular saw, miter saw, glass strip saw, aluminum miter saw, metal miter saw, compound miter saw -Processing: of flat, angle and solid materials, pipes and special profiles -Saw blade: Ø 350 mm -Drive: 2.3/3 kW -Speed: 1430/2860 rpm -Dimensions: 800/900/H1600 mm -Weight: 260 kg
Horizontal panel saw SCM model SIGMA 90 General characteristics: -useful cutting length 4500mm -useful cutting depth 4300mm -blade protrusion 90mm -fluted pressor -pusher with 9 pneumatic grippers -side approach -front planes in bakelite and air veil: 1 fixed 2500x600mm 2 x 1500x600mm cabinets Blade group: -Independent blade group and engraver -main blade D=350mm -engraver D=160mm Programming: -control MASTER 124/S Machine according to CE regulations
SPECIFICATIONS: Sliding table saw with 45° swiveling saw blade Diameter saw blade mm: 400 Diameter of the scorer mm: 120 Length of carriage mm: 3800 cutting width mm: 1600 Motor power KW: 5,5 Motor with brake Complete with: - 01 pneumatic presser - Digital control panel - Duplex continuous inclined cutter 0°-90°
Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 2000 M-No.: 4-02078 000W04206041 Nmax: 9,900 rpm
Key data: 530 mm
Automatic machine with mitre Cutting Area 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x520 mm 30° flat 530 x 320 mm Cutting angle 45°-0°-60° Saw motor 3.0 kW Belt speed 20 - 120 m/min, infinitely variable Equipment: - 99 Programs - Machine stand with chip loading tray - Hydraulic cutting pressure regulation - Stepless speed adjustment - Hydraulic guide arm adjustment - Minimum quantity lubrication - Shutdown at the end of the cut and retraction behind Movable jaw - Chip brush running along - Hydraulic mitre adjustment - Hydraulic vise clamping - Hydraulic saw blade clamping - Instruction manual
I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.
with 2 pcs. roller conveyor Auction-ID: A7-45452-19
Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE
Pneumatic material feed Feed length: 800 mm (multiple stroke possible, max. 2,400 mm) saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade speed: 2850 rpm Infinitely adjustable saw feed Minimum quantity spraying device Piece counter with automatic switch-off Weight: 600 kg
Key data: 45 , 33000 , 1250
Brand MARTIN Type T72A Comfort Control panel eye level integrated in the suction supports Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Parallelogramtic: Aluminium miter table, -46° to 46° digital display, angle-length calculation table Length stop: Aluminium 2,200 mm, extendable up to 3,200 mm with 2 punch stops and digital display Main saw: ø450 mm, cutting height: 170 mm, saw swivelling: 0° - 46° Speed control: 2000/2750/4000/5500 rpm Motor: 5.5 KW Scorer: ø120 mm, 3-axis electric adjustment Motor: 0.75 KW Trolley: 3,300 mm Cutting width: 1,250 mm Suction: Top: ø80 mm, Bottom: ø120 mm weight: 1.600 KG Condition: still to be cleaned, tested, etc.
Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 2,500 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine
Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 1,900 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine
maximum number of results exceeded
please refine your search
1.000 € 
