cut off saw used for sale

PIN cutting machine Clamping width of 240 mm beam height of 320 mm spigot strengths of Max 130 mm PIN length of 350 mm motor power 2,2 kW 380 Volt motor weight approx. 120 kg

MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET

Full frame saw Balfour boy with Chuck wagon Wood diameter of exceeding 60 cm Engine 55 kW L x W x H: 230 x 200 x 400 cm Weight approx. 8 to Built in 1958 Disassembly by buyer The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Small compact Miltirip sawing machine KUSING RP - 200. Technical parameters: Power of the main motor : 7.5 / 11 kW Diameter of the shaft: 30 mm Length of shaft: 200 mm Power of the feed motor : 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 250 / 300 mm Maximum material height: 65 mm Minimum material length: 450 mm ( 250 mm on request ) Small compact Miltirip saw KUSING RP - 200. The machine is suitable for cutting material with low energy consumption. Suitable for cutting raw wood and semi-finished products. KuSING has been manufacturing woodworking machines since 1991. Machine in stock. The advertisement was automatically translated. Translation errors are possible.

ORDER NO. 6524 TECHNICAL DATA - track width 360mm - shaft width 350mm - max disc diameter 350mm - disc bore diameter 80mm - max cutting height 120mm - table top size 2040x840mm in advance: - ratchets - pulling shaft, toothed - ratchets - smooth sliding shaft - shaft with saws - slip shaft, pressure shaft bottom: - 2 rolls in front of the table top - guide - ratchets - caterpillar - central lubrication of the track - electric shaft lifting with saws 0.55kW - electric body lifting 0,55kW - smooth regulation of the feed speed - diameter of the extraction connection 140,125mm - main motor 45kW - overall dimensions L/W/H 3530x2220x2200mm - weight about 4000kg ADVANTAGES – Czech production – 2 slip rollers in the countertop – used multisaw – very good condition Net price: 62900 PLN Net price: 13978 EUR depending on the price 4,50 EUR  ...

Band saw Kirchner Roll á 800 mm Cutting height 300 mm L x W x H: 130 x 80 x 230 cm Weight approx. 750 kg Built in 1944 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

ORDER NO. 6591 TECHNICAL DATA - track width 450mm - shaft width 450mm - disc bore diameter 80mm - shaft diameter 60mm - min dial diameter 300mm - max dial diameter 400mm - max cutting height 250mm - max width of input material 860mm - min length of the workpiece 800mm in advance: - repellers - pulling shaft, metal pressed pneumatically - repellers - pulling shaft, metal, pneumatically pressed - pressure - shaft with saws - pressure - 2 pulling shafts, metal pressed pneumatically bottom: - metal roller, slip roller - guide - repellers - caterpillar - shaft with saws - caterpillar - smooth adjustment of the feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor about 3kW - electric body lift up/down 0.55kW - electric shaft adjustment with saws 2×0.18kW - central lubrication - diameter of the extraction connection 2x300mm  ...

Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5  ...

Pendulum saws Bacus for wall mounting Saw á 500 mm Built in 1982 L x W x H: 70 x 60 x 100 cm Weight 370 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Rip-off saw for cutting waste material (SLABS). Suitable for processing waste after an angle circular saw. Combined woodworking machine for processing waste material. It offers a two-in-one solution. In one pass, the machine cuts a board from a semicircle (slab), which cuts the spreading unit to the desired, quickly adjustable size. The machine can be used for cutting/deburring prismatic materials, but also for waste processing with one machine. The configuration of the machine and its parameters is carried out by arrangement. Technical parameters of the horizontal unit: Main engine power: 2 x 11 kW Feed motor power: 1.1 kW Minimum height of the starting material: 15 mm Minimum material length: 2000 mm Maximum material length: unlimited Maximum height of the starting material: 100 mm Technical parameters of the vertical unit: Main engine power: 2 x 7.5 kW Minimu ...

Full frame saw Boegli MARA-2 with Electr. Switchgear with associated Chuck Wagon (REF. No. 262-1491) Masch. No. 373 Through root á 600 mm With hydr. Sheet tensioning device L x W x H: gate 260 x 200 x 450 cmm Weight approx. 1200 to Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Bos Machine (BMH) with a Sapiens Wood bosmachines We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Bos Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling motors for profiling the inner profiling. Technical status: ...

Saw mill vertical Boegli Weight 4000 kg L x W x H: 200 x 160 x 330 cm Roll diameter 1250 mm Stem á 1.2 m, with mechanical clamping cars 9 m Chuck Wagon L x W x H: 900 x 200 x 170 cm Weight approx. 6000 kg Built 1952 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Dear customers currently we offer you a used tape saw with sliding table of the brand HEMA. Here are the technical data of the machine: Roll diameter: 700mm Cutting height: 650mm Cutting width: 680mm Cutting width between stop and saw blade: approx. 630mm Power: 3 kW Sliding table that can be moved on both sides left half of the table: 650mm right half of the table: 1.400mm Table length: 1.800mm Sliding travel: 1.500mm Particularities: Infinitely variable speed control for cutting speeds and automatic table feed are unfortunately not possible due to the lack of PLC control unit. However, the saw can be used completely manually. Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

Catalog No. 6809 TECHNICAL DATA - track width 350mm - roller width 370mm - max cutting height 200mm - max disc diameter 300mm - disc hole diameter 80mm in advance: - repellants - pressing sliding shaft - repellants - 2 smooth sliding shafts - repellants - shaft with saws 75kW - 3 smooth sliding shafts - repellants - smooth sliding shaft from down: - sliding roller - repellants - caterpillar - shaft with saws 95kW - caterpillar - 1 output shaft, toothed, pulling - rollers pressed pneumatically - max disc diameter 300mm - electric lifting of the upper body up/down 1.1 kW - automatic central lubrication - smooth adjustment of the feed speed 3kW - diameter of the exhaust connection 190mm, 200mm - feeding table with guide and pneumatic clamp rolls in the feeder: - 1 sliding, 9 pulling - dimensions of the feeder length / width / height 6520x1300x1050mm - dim ...

The model M3 differs from the offered multi-blade and surround circuits by its solid and compact design, as well as by the simplicity in operation. Each individual machine element is able to withstand high workloads without risks while constantly utilizing the respective full engine power. Transport chain width mm 300 saw blade diameter mm 350 Min. cutting length mm 390 Feed speed m/min 6-48 Engine power PS 35 25,5 KW CONNECTED LOAD 58 AMPER The highest application security available on the market is achieved by SCM's exclusive system. The backfall protection of the workpiece and the protection against splinters during processing ensure maximum safety. Transport chain width mm 300 saw blade diameter mm 350 Min. cutting length mm 250 Feed speed infinitely variable rpm 6-48 Engine power kW (HP) 18,5 (25)

Working diameter: 1600 mm 4 electric clamping

Best price 4500 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3200x375mm Gross cut capacity- 3200mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115 mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 Kw Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3200x1000x1100mm Weight - 850 Kg

CATALOG NO. 6913 TECHNICAL DATA - track width 360mm - roller width 350mm - max disc diameter 350mm - disc hole diameter 80mm - max cutting height 120mm in advance: - pawls - pulling shaft, toothed - pawls - smooth sliding shaft - shaft with saws - sliding, pressure roller from down: - 2 sliding rollers in front of the table top - runner - pawls - caterpillar - central lubrication of the track - electric lifting of the shaft with saws - electric lifting of the body - smooth adjustment of the feed speed - feed motor about 2.5 kW - main engine 30kW - overall dimensions length/width/height 2500x2300x1900mm - weight about 4000 kg ADVANTAGES – Czech production – 2 sliding rollers in the top - used multi-blade - very good condition Net price: PLN 59900 Net price: 12882EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with large ...

Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the boa ...

Veneer saw

Type USK 1710 Payload 150 kg Measurements (91-171)x60x(59-82 cm) Table size 60x46 cm Weight 15,5 kg

Cutting speeds: 40/80/min Mitre range: left up to 45° / right up to 60° The saw frame is brought to the starting position by hand. The lowering speed is controlled by a throttle valve (on the countersink cylinder) and as soon as the saw frame has reached the end position, the belt run switches off. You don't have to stand by the machine when sawing. The saw has an electric cooling water pump and a service has been carried out on the saw. The vice has a quick-release device Options: 1x saw blade 2720x27x0.9mm Number of teeth of your choice - from 5 saw blades 5% - from 10 saw blades 10% 5kg coolant concentrate 10kg coolant concentrate

Weibert S2 Format circular saw new Formatschiebetisch: 1600mm Engine power: 3 KW (5.5 HP), 400V,. n = 4000 min Cutting height: 103 mm Blade: 250 â 315 mm swivel: 90 °-45 ° WJ 700100 Options: Format table 1270 mm WJ-700101 Before scoring unit with motor 0, 75kW WJ 800105 Suction pipe with hose WJ 400104

CATALOG NO. 6911 TECHNICAL SPECIFICATIONS - track width 350mm - shaft width 370mm - max cutting height 200mm max dial diameter: - on the upper shaft 340mm - on the bottom shaft 300mm - disc bore diameter 80mm in advance: - repellers - 2 pressure sliding shafts -Pressure - shaft with saws 37kW - 2 smooth sliding shafts from below: - introductory table + guide strip - repellers -caterpillar - shaft with saws 37kW -caterpillar - 1 output shaft, slip, smooth - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up / down 1,1kW - automatic central lubrication - electrically adjustable smooth regulation of the feed speed 3kW - diameter of extraction connection 230mm, 250mm - dimensions length / width / height 3000x2300x1900mm - weight about 5000kg ADVANTAGES – Italian production – two-shaft – used multi-saw, very good condition Net price: 19890 ...

CATALOG NO. 6887 TECHNICAL SPECIFICATIONS - track width 340mm - shaft width 350mm - max disc diameter 400mm - blade bore diameter 70mm - max cutting height 130mm in advance: - 2 rows of ratchets - 2 smooth pressure shafts, slip shafts -Pressure - shaft with saws - 2 smooth pressure shafts, slip shafts from below: -Guide -Triggers -caterpillar - smooth regulation of feed speed - electric body lifting - main engine 37kW - feed motor 1,5kW - central lubrication - table top dimension 1930x840mm - dimensions length / width / height 2250x1650x1600mm - weight 2900kg – Italian production – used multi-saw – very good condition Net price: 49900 PLN Price without tax: 11213 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

WK 700 Z classic Tilting circular saws Tilting saws/firewood saw PTO Performance: Tractor approximately 12KW - 16 HP Speed: 1450 RPM with the carbide saw blade 700 / 30 mm with longitudinal stop Depth of cut: D = ca. 250 mm with drive systems Weight: ca. 120 kg G & BGU-90157 Accessories: G & BGU-91272 wood retaining claw G & BGU-95060 PTO PTO standard 102

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - various plastics such as PVC and polyamide - GRP (glass fibre reinforced plastics) - aluminium - bronze - wood - copper - brass and . Drilling (through holes and blin ...

Type KAP 255XJL Cutting height 45?-90?: 80 mm Cutting height swing 45?: 40 mm Cutting lenght 90?: 430 mm Cutting lenght tilt 45?: 310 mm Motor power S1 1,8 kW Saw blade speed 4800 rpm HM-saw blade teeth 254x30x3 mm Transport dimensions 850x520x410 mm Weight 20 kg

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills  ...

ORDER NO. 7212 TECHNICAL DATA - track width 250mm - shaft width 400mm - shaft diameter 80mm - max disc diameter 400mm - disc bore diameter 80mm - max cutting height 140mm - table top width with clearance 730mm - tabletop length 2130mm in advance: -Triggers - pressure shaft, sliding roller -Triggers - pressure roller, smooth - shaft with saws - smooth pressure shaft 4 pcs From below: - Slip shaft, smooth -Triggers -caterpillar Feeding table + guide rail - roll width 460mm - feeder dimensions length/width 1660x630mm - total dimensions length/width/height 2010x630x900mm Take-up table - pulling rollers 8 pcs - roll width 800mm - total dimensions length/width/height 4400x980x880mm - Central lubrication - electric lifting of the body up/down 0.55kW - electric shaft adjustment with 0.55kW saws - smooth adjustment of the feed speed 1-39m/min - feed motor 1.1k ...

ORDER NUMBER 7213 TECHNICAL DATA - max cutting height 180mm - track width 400mm - shaft width 370mm - shaft diameter 60mm C9znbyq - max disc diameter 300mm - disc bore diameter 80mm - min element length 630mm - max element width 600mm in advance: - pneumatic clamp -Triggers - pressure shaft, metal 2 pcs -Triggers - shaft with saws - pressure roller, smooth -Triggers - pressure roller, smooth From below: - metal shaft, pulling, toothed 2 pcs -Triggers -caterpillar - shaft with saws -caterpillar - infinitely variable feed speed control on the inverter - main engines 2x55kW - 4kW feed motor - hydraulic lifting of the body up/down - hydraulic adjustment of shafts with saws - pump motor 0.37kW - Central lubrication - diameter of the extraction spigot 1x300mm, 1x380mm - dimensions length/width/height 3200x2350x2000mm - weight about 5500kg ADVANTAGES � ...

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Band saw Hunziker Roll ø 800 mm 3.5 HP engine Built 1952 Weight approx. 730 kg L x W x H: 120 x 100 x 230 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Machine to the dowel, drill and saw the company EKM spezialmaschinen connection value: 4,4 kW 1 pneum. Workpiece clamping system 1 drill head with 5 spindles in row spacing 25 mm / 40 mm / 40 mm / 25 mm 4 piece glue - and plugs Tools 4 piece adjustable on width 220 mm Under table saw Control PLC Siemens Simatic Fully functional replacement for PLC program on CD,. Shipping dimensions: L 1500 mm x W 1500 mm x H 2400 mm Machine weight: 1000 kg Condition good, fully functional

Technical details: - Min. blade length: 4,330 mm - Max. blade length: 4,430 mm - Possible saw blade widths: 6 - 25 mm - Max. blade thickness: 0.6 mm - Cutting speed: 1,168 m/min - Roll diameter: 600 mm - Cutting height: 360 mm - Cutting width: 570 mm - Table length: 580 mm - Table width: 580 mm - Diameter of suction nozzle: 100 mm - Mobile on wheels, 1 x wheel brake available - With motor brake, can be unlocked for changing the saw blade Engine data: - Power: 2.2 kW - Voltage: 380 V - Current: 5.5 A - Frequency: 50 Hz - Speed: 2,890 rpm Accessories: - incl. 1 x saw blade 9 x 4,430 mm - incl. 1 x saw blade 15 x 4,430 mm - incl. 1 x saw blade 25 x 4,430 mm (already mounted on machine!) - incl. 1 x saw blade 30 x 4,430 mm (Note: Use is not recommended by the manufacturer.) Dimensions (LxWxH): 1,118 x 750 x 2,113 mm Transport Dimensions = Machine Dimensions  ...

automatic double mitre saw OMS SALVARANI INVINCIBILE OK 330 CE standard : Yes n.02 motors . power Hp 3 each one blades diam.mm.330 max. useful cutting length mm.3000 max. useful cutting width 90° mm. 165 max. useful cutting width 45° mm. 115 max. useful cutting heigth mm.115 volt. 380/50 weigth kgs.650

Type MTY 8-70 Grinding wheel motor 250 W. Sawblade diameter 80 – 700 mm. Diamant grinding wheel diameter 125 mm. Total weight 29 kg. Video: abc://abc.youtube.com/watch?v=kYPLaZZwVtA&feature=youtu.be

Bone Band Saw KOLBE K330 Specifications: Type: Kolbe K 330 400 V / 50 Hz / 1.5 kW / 3.4 A Year of construction: 2008 Max.: 260 mm Cutting height passage max.: 310 mm Table dimensions: W59 x D76 cm Machine dimensions: H161 x W72 x D80 cm Band saw size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) including 5 pieces of new saw blades Left-hand delivery Protection Engine Brake Function tested, machine ready for immediate use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493

Compact bridge sawing machine with five CNC controlled axes - sawing / drilling / milling / grinding and polishing with a single machine. A universal machining centre for the processing of natural stone, e.g. granite, marble, travertine and basalt – artificial stone – ceramic slabs CNC control with 15" touch screen and color screen, the five interpolating axes allow for complex machining. Many software tools are included in the scope of delivery, for quick and easy programming (so-called "macros", i.e. pre-programmed editing programs) of – longitudinal and cross-sections – 45° oblique cuts – circular cuts – ellipse cuts – arc cuts – software for drilling – special software for machining kitchen worktops – special software for ceramic processing (tiles + slabs) – special software for engraving work. Remote control console for the control of manual movements, f ...

MULTI RIP SAW type CML SCA 320 with rip trimming unit with two circular blades with adjustable interaxle ( one moving saw ) Technical Details : carpet width mm. 320 max. cutting heigth mm. 120 minimum length of pieces mm. 300 blades diameter : min.mm.250 / max.mm.350 maximum distance between two external blades mm. 320 feeding speed mt/min. 0 / 36 motor power Hp 40 net weigth kgs. 2000 volt. 380/50

Type Z.32c Ser. Nr. 040306 Cutting length 3200 mm Cutting width 3200 mm Max. saw blade protection 80 mm Compressed air pressure 6 bar Main motor 7,5 kW Max. saw blade feed speed 13.5-27 m/min Air cushion tables 4 Scoring unit 1,5 kW Made in Italy Weight 2880 kg

- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...

FKS 250-1300 Circular sawing machines Max blade D.: 254 mm Be hem length 1250 mm RIP fence cutting width 610 mm The length width 845 mm Blade tilt 90 ° /-45 ° Table dimensions (L x W) 650 x 350 mm Table height 835 mm Blade rotation speed 4000 1/min Engine: 1, 5kW 230V Dust nozzle D.: 100 mm / 30 mm Weight: 142kg G & PIECES 5902030

Semi-automatic, double-sided mitre band saw with turntable Swivel bracket design, mitre angle: 30°-90°-45° Material tension: hydraulic, saw bracket feed: hydraulic, Lifting bracket: hydraulic, speed: 37 / 74 m/min, belt dimensions: 3100 x 27 mm, 45°: round 240, square 240, rectangle 260x220 mm, 30°: round 190, square 180, rectangle 200x100 mm, saw feed infinitely adjustable via fine throttle, hydraulic material tension, opens and closes automatically, quick-release vise, can be used to the right or left of the belt, Ball-bearing turntable with grid and quick clamp for holding the saw frame, Particularly easy swivelling of the bracket, Large doors for easy belt change from the front, Manually stepless adjustment of the mitre angles, Material feed from the left or right possible Lifting bracket hydraulically, Automatic adjustment of the stirrup height according to material diame ...

Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm