cut off saw used for sale

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Specifications: Tube outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W Feed module AVM 0.1 - 2.3 rpm incl. feeding unit and auxiliary unit used, in good condition.

SPECIFICATIONS: 2 saw blades Ø 250 mm (2.2 Kw each) 2 saw blades Ø 350 mm (2.2 Kw each) Speed: 3800 rpm Machinable length: min. 200 mm-max. 1200 mm With chip transport carpet

The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Technical data: Motor: 0.55 kW / 220 V Cutting height: approx. 50 mm Cutting depth: approx. 80 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details.

Optimizing Cross-Cut Saw manufactured in 2021. This OPTIMA 60SNC 6200 CE features a maximum workpiece height of 110 mm and a width of 300 mm, with an impressive infeed length of 6,200 mm. It offers a feeding speed of 60 m/min and a saw blade diameter of 450 mm. If you are looking to get high-quality cutting capabilities, consider the OPTIMA 60SNC 6200 CE machine we have for sale. Contact us for further details.

A mobile package crosscut saw for sawn timber is offered. Guide bar length: 1200mm, guide bar type: STIHL, chassis: manually movable, control: manual. Equipped with STIHL guide bar, robust chassis with pneumatic tyres, CEE plug with cable, protective guard. Weight: approx. 250kg, overall dimensions X/Y/Z: approx. 1500mm/800mm/2500mm. Inspection by arrangement is possible.

Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.

Angle cutting machine

Various diameters and widths Auction-ID: A1-49785-229

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - tilting blades 45° - n. 2 motors 1.1 kw - blade diam. 330 mm - v. 380/50 - sn 96T233 - year 1996

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - 4.5 kw - blade diam. 330 mm - v. 380/50 - sn 99T318 - year 1999

Cutting depth:70 mm engine output:12.4 A, 220/380 V , 2 x 6 kW working length:2500 mm dimensions of the machine ca.:3900 x 1100 x 1000 mm weight:1500 kg

dimensions of saw-blade: 350x32x4 mm vice: 180 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 2,2 kw weight: 225 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Installed power: 1.8 kW Voltage: 230 V Saw blade: Ø 380 mm

Manufacturer: Paul, Year: 1999, Type: Strangsäge, Control: NCK 3 , Program: yes, Cutting depth mm: 19 X 600, Working hight mm: 16-19, Positioning accuracy mm: 0,3, Feeding speed max m/min: 60, kW output saw motor: 5,9, wood lenght max mm: 3000, Saw Blade Diameter mm: 530, Year :1999

Manufacturer: Hüllhorst, Year: 1995, Type: Kranzprofilsäge, Control: Ferrocontroll, Cutting depth mm: 250, Working hight mm: 120, Feeding speed max m/min: 60, Feeding speed continous adjustable: yes, Slewing range degrees: +45-45, Work piece length max mm: 4500, Kw Leistung Sägemotor: ca.4, Loading stations: yes, Waste conveyor: no, Saw Blade Diameter mm: 500, Length to slide in mm: 5000, Drill head vertical controlled: yes, Spindles: 8, Drill head vertical controlled spindles: yes, Collet chuck: yes, Optimisation: yes, Maschine vorführbereit: yes, Year :1995

Offer 25318 Specifications: - Manual band sawing machine - Saw blade dimensions 2375 x 20 x 0.9 mm - 2 cutting speeds N 33 / 66 rpm - Max. clamping possibility 205 mm - Mitre adjustable li + re 30 ° - Cutting range - 90° round 160 mm - Square 160 mm - flat 200 x 100 mm - 45° li + re round 140 mm - flat 140 x 60 mm - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Discharge roller conveyor with stop 3000 mm - Feed roller conveyor 1500 mm - Weight approx. 350 kg - Space requirement approx. W 1100 x H 1700 x D 1550 mm

Dimensions (L/W/H): 6400x1500x1780 mm Total power requirement: 19 kW Weight: 1800 kg Control: Arbeits- und Platzersparnis, sicherer Betrieb.Kombinierbar mit einer Hochgeschwindigkeits-Vierseitenfräse zu einer effizienten, automatischen Produktionslinie. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This HOLZMA PROFI HQP 11/16/56/L/X was manufactured in 2011. It is an optimizing cross-cut saw designed for precision and efficiency in wood processing. Ideal for businesses aiming to enhance their woodworking capabilities. Contact us for more information.

This Optimizing Cross-Cut Saw was manufactured in 2025. It features a robust frame with a special inclined support surface for easier loading and squaring, and a high-precision pushing system. The cutting unit is equipped with a carbide-tipped circular saw and adjustable cutting speed. It includes a computer with CNC software for enhanced productivity and safety. Consider the opportunity to buy this Salvador Superpush 200. Contact us for more information about this machine.

TECHNICAL DATA: Machine for making pallets Usable work surface: 1200 x 1200 mm Motorized loading roller conveyor: 4500 mm Motorized unloading conveyor: 2500 mm + 3000 mm (free-running) Installed power (cutting unit): 9 kW EQUIPPED WITH: Package Holder 01 Lower conveyor belt for wood waste: 8000 x 800 mm + Tiltable end ramp: 2500 mm

Manufacturer: Hüllhorst, Year: 1995, Type: KLS 430, Control: Ferrocontroll, Program: 250, Cutting depth mm: 120, Working hight mm: 60, Holz-Querschnitte mm: yes, Positioniergenauigkeit mm: +45-45, Feeding speed max m/min: 3800 kann verlängert werden, Feeding speed continous adjustable: ca.4, Slewing range degrees: yes, Work piece length max mm: no, wood lenght max mm: 500, Loading stations: 5000, Strichcodierung: yes, Saw Blade Diameter mm: 8, Length to slide in mm: yes, Spindles: yes, Drill head vertical controlled spindles: yes, Exhaust diameter mm: yes, machine ready for demonstration: zusätzlich 90 Grad Sägestation und Etikettendrucker, Year :1995

Optimizing Cross-Cut Saw manufactured in 2021. This Paul Reinhardt SlimLine 110 features automatic cutting capabilities, accommodating wood lengths from 300 to 3000 mm and widths from 30 to 350 mm. It is designed for various wood types, including MDF and solid wood, with a maximum cross-section of 58 x 125 mm. If you are looking to get high-quality cutting capabilities, consider the Paul Reinhardt SlimLine 110 machine we have for sale. Contact us for further details.

Crosscut saw for miter cuts Brand: SALVADOR Type: Superangle 600 New machine High performance crosscut saw with rotary table for miter cuts -70° / + 70°. Max. Saw blade diameter 600 mm Saw cross section at straight cut: 30 x 100 mm resp. 310 x 160 mm Saw cross section at 45°: 260 x 100 mm resp. 220 x 160 mm Saw cross section at 70°: 120 x 100 mm resp. 100 x 160 mm Rotary table guided on precision bearings Optical system with laser light barrier for detection of the wood length and Luminescence reader to detect the markings. No manual adjustments for wood thickness Powerful Windows software for easy and safe operation

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

Grecon Dimter Opticut S50 Optimizer Material input length max: 5000mm Wood width min/max 20-300mm Wood thickness min/max 10-100mm Packet cutting capability Cutting out material defects CE Certificate

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Circular Saw Milling Machine  Machine stand can be moved with pallet truck  Front-facing operation  Front sliding slide lock  Bevel cuts with tiltable stop on the carriage  Milling spindle D 30 mm Casting table 1470 x 725 mm Table height from the floor 860 mm Aluminium sled 3160 x 275 mm Suction nozzle for milling machine and saw bottom 120 mm Milling fence with D 150 mm nozzle  Saw motor 4 kw Milling motor 4 kw Cutting height 110 mm Saw blade side adjustment 160 mm Milling Speeds 2900-4400-6000-8000-10000 3 table rings for slotting tools up to 350 mm Weight approx. 1100 kg  Other technical

Automatic Pneumatic Workpiece Clamp  Cutting height 280 mm at 90 Cutting height 140 mm at 30 mm Engine power 11KW/15hp Separating cuts Mitre cuts  Schifter cuts, longitudinal sections  Throat rafters, eaves planks, Burrs, cutting wedge planks Roller conveyor strong version right  incl. roller table and longitudinal stop L=2500 mm side-movable Roller conveyor strong version left  incl. roller table and longitudinal stop L=2500 mm side-movable

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium

Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Cutting height: max. 120 mm Feed length: max. 5,500 mm Cutting width: max. 700 mm Saw blade diameter: max. 700 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Vertikale (stehende) Plattenaufteilsäge Striebig Typ Automat TRK 6220 AV mit Schneeberger Positron Positioniersteuerung zum präzisen horizontalen und vertikalen Zuschneiden von Holzwerkstoff-, Kunststoff- und Verbundplatten. Die automatische Ausführung ermöglicht rationelle, wiederholgenaue Plattenzuschnitte im Möbel-, Innenausbau- und Plattenbearbeitungsbereich. Freistehende oder Wandmontage möglich. Technical data: Schnittlänge: 5.300 mm Schnittbreite: 2.200 mm Materialstärke: max. 80 mm Motor: 5,5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: Cutting height: 260 mm Saw blade diameter: 500 mm Input length: 400 – 6,300 mm Input thickness: 12 – 80 mm Feed rate: max. 250 m/min Cycle time: approx. 1 sec Saw motor: 7.5 kW Marking station: 5,000 mm Outfeed conveyor: 7.5 m with 3 pneumatic ejectors Control system: OptiCom Pro Condition: Gebraucht Location: Tauberbischofsheim, Germany

Saw unit adjustable 45-90-45 degrees. Auction-ID: A1-48994-41

Auction-ID: A1-50229-30

Industrial horizontal beam saw for cutting chipboard, MDF, HDF, plywood and laminated panels. CNC-controlled automatic material feed with pneumatic pressure beam, main saw blade with scoring unit. Suitable for high-precision panel cutting in industrial woodworking production. Auction-ID: A1-50229-6