cut bar used for sale

Bread slicer, Fabr. Long

This 3-axis Bystronic Bysprint 3015 CO₂ laser cutting machine was manufactured in 2006. It features a working area of 3,000 × 1,500 mm and includes an automatic table changer and two cutting heads. The machine has a maximum cutting capacity of 12 mm for stainless steel and 20 mm for mild steel. If you are looking to get high-quality cutting capabilities, consider the Bystronic Bysprint 3015 machine we have for sale. Contact us for further details.

A Trumpf CNC laser cutting machine is offered. Working area X/Y: 3000mm/1500mm, Z-axis travel: 115mm, laser power: 5000W, max. material thickness steel/stainless steel/aluminum: 25mm/20mm/12mm, operating hours: approx. 35000h, laser operating hours: approx. 13000h. The following components were replaced: E/R module in 2024, power tube in 2020 and blower turbine in 2016. Overall dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12t. An on-site inspection is possible.

Brotschneidegatter, Fabr. MHS, model BM 45 NU

Durchlauf - Schneidegatter, Fabr. Delta

A WT Wickeltechnik slitter rewinder is offered. Maximum web width: 1100mm, minimum slit width: 70mm, aluminum foil thickness range: 20µm-120µm, laminate thickness range: 20µm-300µm, maximum speed: 600m/min, maximum unwind roll diameter: 1300mm, maximum rewind roll diameter: 1000mm, maximum web tension: 1000N. An on-site inspection is possible.

ECKERT AGAT SPEED 6000x2000 oxy-fuel cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for the precision oxy-fuel cutting of sheet metal, enabling the production of high-precision and repeatable components. Machining is performed by a HARRIS oxy-fuel torch based on pre-programmed cutting programmes. A support with a capacitive distance sensor maintains the correct torch height above the workpiece, ensuring a stable process. The 6000 x 2000 mm work space enables the machining of larger workpieces, whilst the machine’s open design ensures convenient access to the work area from all sides. The ECKERT AGAT SPEED is operated via the intuitive ECS 872 CNC controller with a touchscreen. The machine is also equipped with CAD/CAM software, which streamlines project preparation and the management of the sheet metal cutting process. Technical specif ...

Brotschneidegatter, Fabr. Rego RMT, Type EMT 10, semi-automatic

Bread slicer, Fabr. Herlitzius

Bread slicer, Fabr. Herlitzius

Offered for sale is an Esab CNC plasma cutting machine. Track gauge: 3000mm, max. cutting width: approx. 2500mm, max. positioning speed: approx. 25m/min, cutting process: plasma, control: Esab CNC control. Machine dimensions X/Y/Z: approx. 4425mm/1676mm/1930mm. Inspection by appointment possible.

turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included

Cutter head for Microcutter - Fine shredder Inotec I175mm 6 winged : 1 piece new, 1 piece used Catalog number: 9089191 , 330026242, 30032963,VI00705,I 175-003904 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

cross-section width:: 800 mm cross-section heigth:: 15 mm feed:: ab ca. 5 mm speed of feed:: m/min cuts max.:: Schnitte/m condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards, - New on-board system machine, - New control cabinet with PLC system Siemens S7-1200, - CE marking, - Instructions for use and maintenance in English or German language The data for this ad was created with ModulMWS - the s ...

Manufacturer: INOTEC Type: I225 Cutter head 6-winged for continuous cutter - ultra-fine shredder Inotec I225 mm Catalogue Number: 30026958 , I4903560 I2250039048 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Cutting machine Paper cutting machine Polar 58EM Year of construction: 1991 Very good condition!

The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Technical data: Motor: 0.55 kW / 220 V Cutting height: approx. 50 mm Cutting depth: approx. 80 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Fezer KF 50 chain mortiser or chain cutter for cutting mortises for tenons. Technical data: Blade: 40 x 175 mm Technical specifications: see PDF Condition: Gebraucht Location: Tauberbischofsheim, Germany

Manufacturer: INOTEC Type: 175 for engines 75 D , 90 D Lug ring for Mikrocutter INOTEC 175 Article number : 30026149 , 30026172 , 175-00020123 V500661-1 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck -Manufacturer: Bilz, Thread cutting chuck, quick-change thread cutting chuck, 3 pieces -Type: WFLK 115 B TR 28X2 -Submission/Price: complete -Transport dimensions: 120/40/H135 mm -Weight: 1.9 kg

CREEL KNIFE - CUTTING CREEL FOR DICE CUTTER MACHINE TREIF - USED 1 set. GATE KNIFE D = 20 mm for cube cutter TREIF FELIX AND FOR TREIF DERBY Art.Nr. 51823 1 set CREEL KNIFE D = 26 mm for cube cutter TREIF FELIX CE Art.Nr. 51818 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement.

Plasma cutting machine manufactured in 2020. This PLASMACUT 3015T features a cutting area of 3,020 × 1,520 mm and a maximum plate thickness of 50 mm. It includes a robust gantry drive system and operates with a Hypertherm Powermax 105 Sync plasma power source. If you are looking to get high-quality plasma cutting capabilities, consider the PLASMACUT 3015T machine we have for sale. Contact us for further details regarding this machine.

we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.

M. No.: 7061504 Format (cm): 78 Equipment / Additional information: Side table, air table, 1x reserve knife

Specifications Type: KBLH 700 Dimensions (LxWxH): 1850 x 680 x 2050 mm Working height: 700 mm Cutting length: 510 mm Knife length: 520 mm Max. shear cross-section: 3500 mm Stroke of the scissors, infinitely variable: 0 – 45 Max. stroke number of scissors: 11 PMG knife for: L-steel 90°+45°/ T-steel 90° Required power : 8.5 kW Weight approx.: 2950kg

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

Key data: 3000 mm, 1500 mm, 6000 W

3000 x 1500mm Dynamic Edition

Bandwidth. 500 mm Strip thickness.. 0.3-2.5mm Coil weight. 5,000 kg Velocity. 70 - 120 m/min. Coil I Diameter.. 508 mm Coil A diameter. 1,500 mm

in different sizes and designs Auction-ID: A7-49089-17

This 3-axis Hypertherm HPR130XD plasma cutting machine was manufactured in 2013. It features a power output of 130A with a 100% duty cycle, and operates at a voltage input of 400V. The included TEKA air extraction unit has a volumetric flow rate of 7500 m³/h and a motor power of 7.5 kW. If you are looking to get high-quality plasma cutting capabilities, consider the Hypertherm HPR130XD machine we have for sale. Contact us for further details.

CO₂ laser cutting machine manufactured in 2006. This Prima Industrie Platino 1530 features a laser power of 4 kW, with an X-axis travel of 3,000 mm and a Y-axis travel of 1,500 mm. It includes an automatic loading system, an automatic unloading system, and a vacuum system. If you are looking to get high-quality cutting capabilities, consider the Prima Industrie Platino 1530 machine we have for sale. Contact us for further details.

Key data: 2 mm

Bandwidth... 1,550 mm Strip thickness 0.5-3.0 mm Coil weight. 15,000 kg Coil I Diameter 508 mm Coil A Diameter... 1,600 mm Straightening rollers 23 pcs. Execution. 6 high Stainless steel / aluminium

Key data: 2 mm

Bandwidth 15.00 mm Strip thickness. 0.5 - 2.0 mm Coil weight... 7,000 kg Profiles... 4 pcs. Speed approx. 20 m/min. Straightening rollers 7 pcs. Complete cut-to-length and cut-to-length line with decoiler, insertion table, straightening machine, cross shears, Longitudinal scissors, electric control.

Laser source: Bystronic BLT 3500 Turbo, laser power: 3500W, wavelength: 10600nm, max. sheet weight: 160kg/m². Base machine weight: approx. 7000kg, laser source weight: approx. 1600kg. Documentation available. An on-site inspection is possible.

Ref. -No.: 10371 Manufacturer: LVD Year of construction: 2013 Type of control: CNC Control: 31ilb Storage location: Halberstadt Country of origin: Belgien Structural steel: 15 mm stainless steel: 8 mm aluminum: 6 mm Laser source: Co2 - 4KW Edit size: 6000 x 2000 mm changing table: Yes tension: 50 Hz - 400 Volt Serial no.:: 348XX Operating hours: 31280 H Electrical connection: IEC X-Axis: 6200 mm Y-Axis: 2100 mm Max capacity: 4 kN Max. weight: 25055 KG Dan Performance: 75 kW Machine type: 62-21 cutting head: LM2000 NC Focus Process control: LM2500 Capacitive sensor: LM2301 EG8030 Further information: Last maintenance incl. new PC in 04/2023

Ref. -No.: 10368 Manufacturer: BYSTRONIC Year of construction: 2011 Type of control: CNC Control: Bystronic ByVision Storage location: Halberstadt - Germany Country of origin: Schweiz Manufacturer: BYSTRONIC Laser medium: CO² Kohlenstoffdioxid wavelength: 10600 Nm Maximum power: 6000 Cw Workspace X: 3048 mm Work area Y: 1524 mm Stroke Z axis: 100 mm Positional deviation Pa: +/- 0.1 mm/m Position spread Ps: +/- 0,05 mm Positioning in axis-parallel X and Y maximum: 120 m / min Positioning simultaneously X/Y maximum: 169 m / min Axis acceleration X/Y maximum: 30 m/s^2 table load capacity: 890 kg table change time: 25 s

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details.