customer used for sale

Working area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Tool changerTool changer planevertical Type of gripperDouble gripper Number of tools30 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12100 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4 ...

Gamma Pack V3 vertical cartoner + dispenser Year of manufacture 2004 Vertical gluing cartoner. 6 different formats. Cup doser integrated into the cartoner (ideal for powders, seeds, etc.). Operating video on request It can be seen powered up and in perfect working order. The formats supplied with the machine are as follows: W: 220mm D: 260mm H: 80mm L: 160mm D: 210mm H: 60mm L: 100mm D: 165mm H: 55mm L: 100mm D: 165mm H: 27mm L: 100mm D: 155mm H: 27mm L: 220mm D: 315mm H: 65mm My customer has changed equipment, she was packing grass seed.

The machine is especially suitable for cutting beets, carrots, potatoes, peppers and other fruits and vegetables. This cutter enables the cutting of fruits and vegetables into dice and strips and the form of the cut pieces can be chosen by using different cutting tools. The desired dimensions of the dices and strips can be chosen by applying the required cutting tool. The device comes with a set of tools that ensures the cutting of fruits and vegetables to standard sizes. If the customer requires larger or smaller cut pieces then the standard ones, additional tool sets are supplied as an accessory. The cutting material is delivered manually to the infeed hopper, and cut pieces are discharged through an output funnel into a receiving bin. This output funnel is placed 380 mm above the floor level. The cutter is set on cluster wheels and therefor easy to move around the ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 86700 € : 1742.67 € : 3100 mm : 16 mm : 10 mm : 350 mm : 10 1/min : 2 ° : 14 : 61 to : 1000 mm : 200 mm/s : 37 kW : 410 l : 2 Stk. : 818 mm : 550 mm : 3580 mm : 4550 mm : 2250 mm : 3825 mm : 2250 mm : 15000 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglengt ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 56100 € : 1127.61 € : 3100 mm : 10 mm : 6 mm : 50 mm : 13 1/min : 1.5 ° : 16 : 22 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 2 Stk. : 865 mm : 580 mm : 3515 mm : 4200 mm : 2250 mm : 3600 mm : 2100 mm : 9300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 89300 € : 1794.93 € : 4100 mm : 13 mm : 8 mm : 350 mm : 8 1/min : 1.75 ° : 18 : 62 to : 1000 mm : 200 mm/s : 30 kW : 330 l : 3 Stk. : 818 mm : 550 mm : 4520 mm : 5350 mm : 2250 mm : 3650 mm : 2250 mm : 16300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttingleng ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 58600 € : 1177.86 € : 4100 mm : 6 mm : 4 mm : 50 mm : 12 1/min : 1.5 ° : 20 : 17 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 3 Stk. : 865 mm : 580 mm : 4510 mm : 5230 mm : 2300 mm : 3600 mm : 2150 mm : 11750 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 64700 € : 1300.47 € : 3100 mm : 13 mm : 8 mm : 50 mm : 13 1/min : 1.75 ° : 16 : 37 to : 1000 mm : 200 mm/s : 30 kW : 330 l : 2 Stk. : 840 mm : 600 mm : 3550 mm : 4280 mm : 2300 mm : 3600 mm : 2350 mm : 12500 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttingleng ...

This is the latest generation of the VarioCooking Center, the iVario Pro 2-S from the premium manufacturer Rational. (successor to the VCC 112L). The iVario Pro 2-S is offered including the pictured accessories but without a base. However, a base frame can be purchased for an extra charge. The device has been tested in our in-house specialist workshop and is fully functional. The RRP for the basic unit is €17,700 net The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our device service for you •Manufacturer's warranty until 08/2025 • H ...

DIRECT FROM PRINT SHOP We are selling this machine on behalf of our customer and are trying to realise his asking price. However, we are open to offers from you. Offer consisting of: Kallfass UNIVERSA 5050 - Angle welder Universa 5050 - Shrink tunnel Compact 650 S - Roll delivery On request we can organise the following for you: Packing, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

DIRECT FROM PRINT SHOP We are selling this machine on behalf of our customer and are trying to realise his asking price. However, we are open to offers from you. Offer consists of: - mobile round pile feeder RFU-54 Horizon RFU-54 round pile feeder - Installation: quick to set up, no special skills required - Format: max. 540x1000mm; min. 100x148mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm - Output: max. 45,000 cycles/h - compatible with: Horizon AFC-544AKT, Horizon AFC-546AKT Horizon AFC-564AKT, Horizon AFC-566AKT Horizon AFC-566F, Horizon AFC-566FKT - Weight: 518kg We can organise the following for you on request: Packing, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

DIRECT FROM PRINT SHOP We sell this machine on behalf of our customer and try to realise his asking price. However, we are open to offers from you. Offer consisting of: - buckle plate folder AF-406A - Flat pile feeder Horizon AF-406 A 6-pocket folding machine - Parallel folding rollers condition:0% - Technology: Touch & Work - Memory fold types: 13 standard fold types pre-programmed - Job memory: 200 memory locations for repeat jobs - Number of pockets: 1st folding unit: 6 pockets - Format: max. 400x650mm; min. 100x50mm - Fold length: max. 350mm; min. 20mm - Paper weight: 40-250g/sqm - Loading capacity: 500mm - Capacity: max. 30.000 cycles/h - Power: 230V/50Hz - 1,5kW - Dimensions: 1.800x890x1.400mm (without delivery) - Weight: 550kg On request we can organise the following for you: Packing, loading, transport ( by ship ...

Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. Pitch: 1xBohrkopf mm Working width: 3300 mm Boring depth max.: 80 mm Workpiece thickness: 150 mm Motor output: 0,5 kW STEGHERR - Dowel drilling machine type FD/E ------------------------------------- for the efficient dowelling of crossbars and slats, rungs and Door elements. The window and door dowel drilling machine is an extended FD and is equipped with a freely programmable PC control with a floppy disk drive and 14 screen equipped. Up to 1000 drilling patterns with 10 holes each can be saved and accessed via code numbers. Specially designed for window and Software developed by door manufacturers guarantees high cost-effectiveness and extreme precision. Part of this machine is a pre-built STEGHERR-NC STOP positioning device that positions the workpiece with an accuracy of +/- 1/ 10 mm in front of th ...

Power: 1.35kW; Speed range: 230 â€" 3100 rpm; Speed levels: 9; Spindle holder: MK-2; Drilling stroke: 85 mm; Spindle projection: 140 - 540 mm; Table size: Table size: 500 x 740 mm / 250 kg loadable; Head tilt: 90 left / 45 right; Column diameter: 80 mm; Quick-release chuck: 1 - 16 mm; Weight: 240 kg; Jet Radial Drilling Machine JRD 387 A-T - 400 V stable radial drilling machine from the Profi-Line with integrated base cabinet and height-adjustable, swivelling and movable drilling head for the trade Radial Drilling Machine Jet JRD 387 A-T - Profi-Line with machine base and adjustable drill head ProMAC drilling machines with 13 mm to 40 mm drilling capacity ensure continuous and precise drilling work with precise positioning and depth control All machines are designed for a long service life and are equipped in a variety of ways - for commercial use and maintenance  ...

Siat Semi-Automatic Pallet Wrapping Machine Brüninghaus Siat  Pallet wrapping machine  Location: Bocholt Dismantling and removal by the customer on site. More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Korimat KA 120, autoclave, with 3 basket inserts, new wheels, Connection 400V, 9kW, year of construction GÜ 1993, weight approx. 144kg, used, functional, as returned by customer

Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency Comprising a range of top tier components the Complete Bottling Line KRONES ensures seamless performance effectively meeting the stringent demands of high volume production Main Components Firstly the KRONES K 131 669 filling monoblock manufactured in 2016 stands as the centerpiece of the Complete Bottling Line KRONES Capable of handling a remarkable 20000 bottles per hour it is complemented by the 1998 KRONES 472 072 depalletizer and the 2000 Gronemeyer RINSER 8983 400 4 Consequently this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES Quality Control ...

Crushing machine for shredding joinery and joinery waste, as well as Wood waste of many kinds Insertion dimensions: 600 x 800 mm Propulsion: 18.5 kW Photo shows the machine as returned by customer

on behalf of the customer For enclosing folded brochures from the stacking magazine - Drive via servo motor - Feeding belt 1.00 m - Inventory control -Tape transfer 90° right - max. 400 folds depending on paper quality - Formats: min. 29 x 29 x 2 mm, max. 150 x 78 x 12 mm - Height-adjustable substructure

Floor type Boring and Milling M/C PAMA Speedram SR 2000 Year 2012 Condition never installed and never used TECHNICAL DETAILS spindlediameter: 180mm x-travel: 18000mm y-travel: 5000mm table: 18000x3000mm Control: Siemens 840D spindle speed: 4 - 2.500 U/min spindle capacity: 60kW ADDITIONAL INFORMATION Equipment/ Accessories: - Hydrostaticguidefor all axes - Floorplates - Head changingstation including 8 heads plus 18tool positions - coolantsystemKnoll, Operating pressureoutside spindle 5 bar / inside tool 45 bar - chipconveyor - stroke axis X:18000 mm CONDITIONS - FOB - Packing Included  Not Included : - Trainning and Foundation; - The customer must provide the necessary equipment and structure to move the load to assemble the machine. - Machine does not have manufacturer warranty. - Any part or component that needs to be replaced must be purchased  ...

Article number: 27-06-063 Manufacturer: Chip Anne, Lid Mint condition Custom-fit seat and paint finish in RAL according to customer requirements Shipping time: All rights reserved. Year of construction: NEW L x W x H: approx. 1000x1000x200mm Weight: approx. 4kg suitable: FP2 & FP3 FP2 Active Digital FP3 Active Digital FP2 Infinitely variable FP3 Infinitely variable

Output: up to max. 330 containers / minute (plastic bottles with delicatessen sauces 200 g), single-beam X-ray inspection device (side view), Tube replacement in Sept 2022 - 1 additional new X-ray tube included, max. bandwidth 156 mm, Scanning height: 425 mm, Power max. 600 W, Voltage: continuously adjustable up to 60 kV,, Current: up to 10 mA, continuously adjustable, Designed as a curtain-free X-ray scanner, Scanner tape: 2600 x 190.5 Intralox, Total length of the system: approx. 2706, Working height: 950 - 1050 mm, Working direction: left - right, Elimination: short-stroke pusher, Belt conveyor belt with IMOT drive unit (servo motor) for, Overtracking., Tool-free quick-change device for replacing the, belt., Continuous adjustment of the transport speed via the, Control of the machine. Small transfer radii for optimal, Product transfer situation on the incoming and outgoing conveyor.,  ...

inlie GEA DIESSEL syrup house DICON Dimix linear mixer Capacity 32000 l/h Total dimensions length x width x height: 1800 mm x 1300 mm x 2300 mm No mixing tanks. The DICON™ linear system mixes liquid ingredients in the selected mixing ratio (in the pipe); and, because less equipment is required, space requirements are reduced, maintenance and cleaning (e.g. cleaning in place) Description: The economical mPDS 1000 analysis unit continuously determines the density and concentration of liquids and gases. Since the assessment body has written several application programs, the following process applications can be included in the standard: measurement of extract, alcohol and original wort in beer, measurement of alcohol in distilleries, Brix measurement, true and relative density and API number of petroleum products and measurement of gas density. Special requests can also be fulfi ...

Used Blow Molding Machine UROLA MSC6 HDPE Year 2019 Introduction The UROLA MSC6 HDPE blow molding machine manufactured in 2019 stands as a pinnacle in HDPE bottle production technology Equipped with six moulds this rotary blow molder sets a new standard in efficiency and performance Technical Specifications The UROLA MSC6 HDPE utilizes a rotary blowing unit featuring six cavities capable of achieving a maximum output of 1600 bottles per hour Furthermore the machine boasts a maximum mould opening of 240mm and a mould clamping force of 9 000 kg ensuring precision and stability in the production process Blower HDPE Crafted specifically for High Density Polyethylene HDPE bottle production the UROLA MSC6 HDPE guarantees superior quality and durability Its advanced design and engineering cater to the demanding requirements of the packaging industry making it an ideal choice for manufacturers s ...

0: 250 mm 0: 3530 m³/h 0: 2500 pa Dimensions (L/W/H): 3.350x1.020x2.290 mm engine output: 5,5 kW turning speeds: 2800 U/min compressed air: Pmax 8,0 bar weight: 1100 kg Nestro dust extractor NE 250 W For sale on behalf of the customer ex location -------------------------- Manufacturer description: Dust extractor with pneumatic shaking and automatic water extinguishing system Including suction nozzle d=300 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW 400V/50 Hz, on/off switch, potential-free Contact for machine monitoring, motor protection switch, Pressure difference display, 3 mobile dust bins Clamp bracket, 3 chip collection bags (PE) 600x600 mm, i=1100mm Housing made of galvanized sheet steel Technical data: Nominal volume flow 3,530 m3/h associated negative pressure 2,500 Pa Suction side connection d=250 mm Continuous operation mode Type of current: three-phas ...

Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base pl ...

used Kalmeijer KGM pastry moulding machine? Manufacturer: Kalmeijer? Type: Kalmeijer KGM? With a forming roller No. 1501-920? The thickness of the dough figures is adjustable.? The dough hopper, forming roller and dough feed roller are easily removable for cleaning. Easy to use? The conveyor belts for the sheets can be folded in and out. The machine takes up little space.? The machine is on wheels and therefore mobile.? Dimensions:? Height: 123 cm? Width: 166 cm? Depth: 52 cm? Price on requestSee pictures for details.The Kalmeijer pastry moulding machine is very suitable for the production of pastries from various shortcrust pastries, which are used to make crescents, biscuits, speculoos, etc. Because there is no friction or pressure on the dough in the machine, doughs with a fat content of 30% to 70% and a sugar content of at least 30% (100% of the flour) can be used. This makes it poss ...

Kalmeijer KGM Pastry Forming Machine usedManufacturer : KalmeijerType: Kalmeijer KGMWITH 1 forming roller thickness of the dough figures is adjustableDough hopper, forming roller, dough feed roller is easily removable for cleaningEasy operationThe conveyor belts for the trays are foldable and foldableMachine requires little spaceMachine is mobile on wheelsDimensions: Height: 122cmWidth: 170cmDepth: 52cmDetails see pictureDetails see pictures.The Kalmeijer pastry forming machine is very suitable for the production of pastries from various shortcrust pastries from which crescents, biscuits, speculoos, etc. are made. Because there is no friction or pressure on the dough in the machine, doughs with a fat content of 30% to 70% and a sugar content of at least 30% (100% of the flour) can be used. This makes it possible to use the dough according to your own recipe and to make pastries according ...

Villa BR1510 thermoforming machine 1500 x 1000 h 650 mm just overhauled any tests double trolley ceramic resistors vacuum pump included computer for saving recipe/customer data possibility of training against operator billable in full + VAT

Used Isobaric Filling Machine Cobert Exacta up to 1600 bph Introduction to the Filling Machine Cobert Exacta The Cobert Exacta isobaric filler with its 16 taps and advanced features stands out as a cutting edge solution in the industrial bottling field Technical Specifications Equipped with filling taps featuring pre evacuation and degassing the Cobert Exacta ensures precise and uniform bottle filling Additionally the pneumatic piston system for bottle lifting integrated with an air recovery mechanism guarantees efficient and reliable operation Moreover the presence of a vacuum pump optimizes the filling process maintaining high standards of quality for the final product Furthermore the external tap washing device contributes to the cleanliness and hygiene of the machine essential for safe and compliant production Performance and Functionality Moving on the Cobert Exacta offers variable  ...

Key data: 1200 kN

Angel Victory 330/120 Tech / Production line with the robot Angel Viper 12 Year of construction: 2010 Injection unit: Screw diameter: 35 mm Spraying weight: approx. 140 g Spray pressure: 1595 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 0x0 mm Size of clamping plates: 740x630 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Euromap Robot Interface Air valve x 2 Hydraulic core pull x 2 Hot runner control x 9 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Proportional valve on the injection unit – precise injection The machine has been regularly serviced by the authorized service Engel Del ...

Used Can filler Uni Blend 72 and Seamer Angelus 120L up to 40000 cph Introduction of the Can filler Uni Blend and Seamer Angelus 120L In the highly competitive bottling industry companies rely on advanced machinery to streamline production Among available equipment the Filler Uni Blend 72 and Seamer Angelus 120L stand out Filler Crown Uni Blend 72 The Filler Crown Uni Blend 72 is crucial for high volume bottling Equipped with 72 ADCOR valves it ensures precise filling boasting a remarkable capacity of 40000 cans per hour Therefore it helps companies maintain a competitive edge Seamer Angelus 120L Complementing the Filler Uni Blend 72 is the Seamer Angelus 120L Renowned for precision and reliability it features 12 sealing heads each meticulously calibrated This level of sealing precision is crucial for preserving freshness and carbonation Consequently it enhances customer satisfaction and ...

Feed speed: , m/min. Dimensions (L/W/H): , mm total power requirement: , kw weight of the machine ca.: , kg Year: , 0 Arm length: , mm 1 KUPER veneer splicing machine FW Junior 920 --------------------------------- with air heating system. For sale on behalf of the customer in the IS condition! For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm. A special glue thread is used as the adhesive medium and is zigzag or Wavy line is applied by a heated thread guide. Guaranteed tight joint, high adhesion and tear resistance even with very wavy surfaces Veneer. During subsequent pressing, the glue thread is placed inside. Sanding the adhesive medium is therefore not necessary. Easy to use and efficient way of working Method that has now been proven 1000 times over. Specific features: - Torsion-free C-stand construction made of steel - Resistant PUR paint - Discus disc system with to ...

NON-FERROUS METAL SORTER - with vibrating feed conveyor and magnetic drums - For sorting e.g. iron, aluminium and copper - Conveyor width 500 mm - 14-pole concentric separation drum - Sturdy PVC strap - With control cabinet, 2 frequency converters for the band and the separation drum - Color according to customer requirements - New machine made in the EU

We are selling a UMC-750SS Super-Speed 5-Axis CNC Vertical Machining Center on behalf of a customer. The machine has been used for less than 300 hours due to a lack of orders and has the following options:, - Control Options, - Spindle with 15,000RPM, - Laterally mounted high-speed tool changer with 50+1 magazine positions, - Coolant flow through the spindle, - additional accessories

Seize the opportunity to own a nearly new Domino D620i CO2 Laser at a significant discount. Originally acquired for a project that was discontinued, this laser has only been run once and is in excellent condition. Ideal for businesses looking to enhance their production capabilities with minimal investment. Condition: Like new – ran only once for testing in a project that was not continued. Inclunding: Domino DPX1000 suction system, 230V, 6m suction hose, all substrates except PVC, incl. user manual electronic Touch Panel 10.4" for D-, F-series, requires X59 communication cable (old TP2) Rotary encoder IP66 for Ax, D, F and U series, with coupling, 10mm shaft, 10m connection cable, cable plug and mounting bracket Maintenance unit for IP65 laser, with air filter, control valve, solenoid switch, 5m cable, 12m compressed air hose, inlet 10mm (customer side), outlet 12mm (to lase ...

To be sold on behalf of a customer. Condition new. 4. Axis for CNC machine to program via control. Hydraulic. Heavy-duty design

Key data: 560 mm

Okuma LU 35 M. Sold on behalf of the customer. Further data on request. Inspection possible in operation.

We are selling a Stratasys F370 on behalf of a customer. Maintenance contract was active until 04/2023. The machine is in very good working condition and comes with many accessories., Stratasys F370 Accessories:, - 9 Build Trays, - 1 role QSR Support, - 1 roll ABS black, - 8 printheads (2 installed), - 4x lye powder for washing out the support material, - last electrical safety test in 10/2023, network connection: LAN (Ethernet), WiFi, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: ABS-CF10, ABS-ESD7™, ABS-M30, ASA, Diran™ 410MF07, PC-ABS, PLA, QSR Support, TPU-92A, Printing features: Replaceable extruder, heated build chamber, closed build space, two extruders (model & support), printing tech ...

engine output: 5 kW saw-blade dia.: 300-350 mm Working speed: 0-40 m/min weight: ca. 1550 kg kg Concept 350 PLUS Partnership Edition pressure beam saw Cutting length: 3.200 mm ------------------------------------------------ combines the advantages of different sawing systems. Flexible as one Panel saw, precise and safe like a pressure beam saw and ergonomic like a rip saw ------------------------------------------------ Manufacturer description: - Saw unit can be swiveled up to 46° - Pressure bar, including LED lighting with 3 different action colors: WHITE: Machines in rest position RED: Pressure bar lowers or emergency stop function BLUE: Sawing unit moves - variably usable support table 1,000 x 500 mm - Scoring system using the main saw blade in synchronization - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, including ...

Polar Mohr stacking lift L-1000-W-6 => refurbished for ergonomic working at user-friendly working heights Specifications Tub size 1400 x 1000 mm Stroke max. 910 mm Load capacity max. 1000 kg The automatic lifting of the material to be cut makes it possible to the operator at an ergonomically favourable working height for him the material into the vibrator or directly into the cutting machine shop. However, the stacking lift can also be used for stacking material to be sliced. The lowering takes place semi-automatic. This means that the process will be manually started and passed through the light barrier automatically stopped. POLAR stacking lifts do not have to be can be anchored to the ground and can therefore be easily be converted. Customer: - The productivity of the cutting machine increases by up to 10%, as the working height during loading/unloading rem ...

We are selling a Haas ST-20 turning center on behalf of a customer. The machine was installed and never used productively., - Control Options, - Options package, - High pressure coolant flow, - Accessory package

On behalf of a customer, we are selling a used EOSINT M280 in very good condition. The machine has always been serviced by EOS, last service 09/2023. Laser unit was renewed at approx. 10,000h., - Dual mode operation (argon and nitrogen), - CPM - M280 Comfort Powder Module, - recirculating filter system LAS 400N, - Gas Filter System M280, - Laser cooling air/water, Material sets:, - Maraging Steel MS1, - Stainless Steel 316L, - Stainless Steel GP1, - Stainless Steel PH1, - Hastalloy X, - Inconel 625, - Inconel 718, - CoCrMP1, - AlSi10Mg, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 2200x1070x2290, Recommended pitch size in m: 4.8x3.6x2.9 minimum, Weight in kg: about 1250, Power supply: 32 A, Power consumption: maximum 8.5 kW / typically 3.2 kW, compressed air requirement: 7,000 hPa; 20m3/h, software: PSW3.8, laser type: Yb fiber laser, 400 watts, precision optics:  ...

cut-off saw: , KW Spindle diameter: , mm Spindle length: , mm Number of tools: , St. Festo slotting machine ZA --------------------------- with crosscut saw 1 slotted spindle ZA length stop For sale on behalf of the customer in the IS condition! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenoning spindle: 1 0 Number of milling agregates: 3 St. Spindle diameter: 50 mm Weinig Unicontrol 10-5, built in 1993 Slotted spindle 6 x 100 mm 2 profile spindles length 320 mm, stroke 95 mm Fitting spindle with folding device with return and discharge device Weinig Univar 10 with olive drilling rig, built in 1990 3 spindles each 320 mm long, stroke 95 mm + Fitting milling device Götzinger SFM, built in 2011 -------------------------------- Milling machine for the locking parts in the frame with 4 mm clearance + Drilling corner bearing Includes tools for Weinig Unicontrol: Zuani Tools IV 68/78/90 wood, 68/78 aluminum 4 mm clearance -------------------------------- For sale on behalf of the customer ex location Machines are currently still in use -------------------------------- (Technical information according to the manufacturer - no guarantee!) The data for this ad was created wi ...

Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customers needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition th ...

The ADF 0808 METAL milling machine is designed for processing steel, cast iron, and non-ferrous metals. The basis of the machine is a massive and rigid frame weighing 2.8 tons. The vibration-absorbing properties of the structure, its increased wear resistance and resistance to plastic deformation allow processing of ferrous metals in long-term modes. The guides and SHP have corrugation protection, which allows you to effectively protect the parts of the machine from dust, chips and coolant. The high precision of the machine is ensured not only by milling the places and the plane of the table, but also by their grinding. The design of the machine with a moving table has a positive effect on the processing modes and quality of the products. ADF 0808 has an automatic system of lubrication of seams and guides, which simplifies the maintenance of the machine. At the request of the cu ...

With EdmoLift leveling posts, items can effortlessly be raised to a working height of 1,100 mm. The level lift offers leg and foot clearance on three sides, ensuring smooth operation thanks to its excellent accessibility. In addition, with our dolly accessory, the leveling lift becomes mobile and thus offers two extremely practical advantages: Firstly, it can be easily moved during cleaning and cleaning. Second, it can serve multiple jobs, making your investment even more worthwhile. Pallets or containers are placed with the hand pallet truck or forklift directly on the leveling lift. The TSL models have a minimum height of 70 mm, with the TSE models, this is only 10 mm. Type TSLN leveling feet are equipped with a stepless inclination function and can be tilted by 40 ° to the left or to the right. This is a considerable reduction in workload, as it opens up an ergonomic window that help ...

This Lippelt Rustica 240 is offered on behalf of the customer. The machine has a double spreading and a long deposition. There are 2 cutting rollers and 3 punches. The machine is now available

Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm (customizable) Rising area 5,000mm (customizable) Angle in bend 35, 40 or 45° Feed height: horizontal (individual) Drop height individually adjustable Construction: height-adjustable (to be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Propulsion: Motor 1.1KW ( adjustable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 cleats - 400mm pitch 2-ply particularly transversely stable Permanently mounted overbelt magnetic  ...