cup printing used for sale

Grunwald Fully automatic cup filling and sealing system - 3 Format sets (BJ 2019) - Ink-jet encoding - Conveyor belt extension - Dosing bar incl. aerator inserts (BJ 2020) Filling Temperature: Cold Filling Cup: A) Round plastic bucket with handle and collection basket, ø175 x H 131 mm B) Round plastic cup, approx. ø 104 x H 55 or 65 mm C) Round plastic bucket with handle and grass collector, ø 227 x H 194 mm Lid: A+C) Plastic slip-on lid (tamper-evident closure) B) Pre-punched plastic blanks + slip-on lid Connected load: approx. 12 kW, 3/400 V/N/PE, 50 Hz Air requirement: dry, filtered compressed air, 6 bar, approx. 300 l/min. Dimensions: approx. L 2,200 x W 2,200 x H 3,200 mm (without removal belt and control cabinet) Weight: approx. 3,500 kg Condition: well-maintained, in working order Availability: immediately

G&N Kugelmüller MPS 1 Cup Grinder -Spindle speed 3150 rpm -Grinding height over magnet 130mm -Magnetic plate 200x100mm -Side grinding wheel puller -Fine adjustment -Year of construction 1996 -Drive motor 0.6KW -Machine enclosure -Well-maintained original condition Dimensions: LxWxH 0.8x0.7x1.6 meters / Weight 150Kg

Condition: Very good condition

G&N Kugelmüller MPS 1 -Spindle speed 3150 rpm -Grinding height over magnet 130mm -Magnetic plate 200x100mm -Side grinding wheel puller -Fine adjustment -Drive motor 0.6KW -Coolant device -Machine enclosure Dimensions; LxWxH 0.8x0.7x1.6Meter / Weight 150Kg Errors / input errors excepted Hjbsvtrr Tjkn Au S Tol

automatic rotary machine,, in use for mustard,, set up on round plastic cups with a diameter of 70 mm and a height of 80 mm,, additional format for rectangular cups: 55 x 43 x 17.7 mm, Filling volume: 5 - 200 ml, Output: up to 1,500 cups per hour,, Rotary consisting of:, Cup magazine, automatic unstacking of the cups,, filling station,, Lid station with corresponding lid magazine and automatic unstacking of the lids,, Output of the filled and sealed containers to an integrated collection table

Fully automatic cup filling and lid closing machine which can be used for packing soft and easy to pump products like butter, herb butter, etc. into tubs and close the cup with a snap cap cover (no sealing). The machine was rebuild in 2004. Rectangular with round corner format, ± 95 x 60 mm for filling ± 80 up to ± 150 gram.The butter is feed with an ± 200 liter hopper. Stainless steel dosing station. The speed can be adjusted by a frequency converter up to 80 cups per minute. Outfeed conveyor. Vacuum pump with the machine (Busch). Control panel with frequency converter., Type of Machine: Butter tub filling and lidding machine, Capacity: ± 700 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: ± 80 up to 150 gram, Packaging Size: Rectangular with round corners, ± 95 x 60 mm, Year of refurbishing: R2004, Motor power: 2,2 kW, Weight: ± 1.400 kg

A Gasti cup filling and sealing machine for preformed round cups, which has been used in the dairy industry, is available. Cup diameter: 95mm, output range: 2500-4500cups/h, filling volume range: 50ml-500ml, max. product temperature: 100°C, max. product pressure: 2bar. An on-site inspection is possible.

The GRUNWALD Foodliner 3000/2 is a proven, fully automatic Filling and capping machine for cups , designed specifically for hygienic food production., Performance: up to about 50 strokes per minute, Formats: LARGE oval, small oval, spit, Mövenpick, 95-round, Cutting rotor agitator, servo-operated dosing, headspace flushing, sealing via seal cylinder, clamshell cap setter via cam disc, ---------------------------------------------------------------, Your advantages with the GRUNWALD Foodliner 3000/2, ✔️ Up to 50 strokes per minute, ✔️ Integrated dosing station with servo-controlled filling, ✔️ Seal cap support and heat sealing station, ✔️ Optional MAP-capable (headspace flashing), ✔️ Reversible lid station, ✔️ Robust stainless steel version, ✔️ Suitable for wet operations, ✔️ Compact design (approx. 7.6 m length), This Cup filling and closing machine it is ...

A fully automatic cup filler for buckets is available. Design: rotary machine, lanes: 1, filling capacity: approx. 3000 cups/h, filling volume: 850ml/1000ml. The control system and the servo systems of the machine were dismantled and are missing. Documentation available. An on-site inspection is possible.

40 x 75 x 190 cm

Used Hugart cup packer type DS 20.000. Capacity 20,000 pcs/h. Dosage from 0.125 liters to 0.5 liters. In addition, a platinum tray, 2 Mitsubishi servo motors, seals for the fillers and the dispenser, heating elements for welding machines.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Transfer: in the current condition as seen -Vacuum suction cup: with damage -Version: with vacuum suction cup, equipped with directional valve and induction knife for the stroke -Stroke: 70 mm -Sucker: Ø 125 mm -Piston rod: 20 mm -Total length: 420 mm -Total length extended: 490 mm -Number: 31 pieces available -Price per piece -Dimensions: 420/140/120 mm -Weight: 4 kg/piece

Offered is a surface grinding machine (cup wheel grinder): Table surface X/Y: approx. 175mm/450mm, max. grinding length: approx. 200-250mm, max. grinding width: approx. 175mm, speed: approx. 2800rpm, weight: approx. 450kg, inspection possible by appointment.

Complete set of metal hole cutters hss, sizes 20- 25-30-35-40 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-45834-369

Complete set of metal hole cutters hss, sizes 20- 25-30-35-40 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-45834-319

Set of bore hole cutters sizes from 18-30-32-35-55 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-45834-250

Waldner Dosomat 16, rotary, 6-head filling machine for aseptic filling of cups. Capacity: up to approx. 9.000 cups/hour. 3x Format sets: round 95 mm, square 65x65 mm and square 95x95 mm. Format change in the shortest possible time by the tool-free exchange of quick-change format plates, push-in cup destackers and lid magazines allow immediate response to the daily market requirements and to the realisation of strategic decisions in terms of cup design changes., Working principle:, - Automatic cup de-stacking storage buffer magazine for ± 15 minutes buffer (preformed cups)., - Cup de-stacking station., - Cup sterilisation using H2O2 and hot sterile air. All the necessary valves and lines are situated in a sterile module next to the machine. The cups passing through it are subjected to sterile air enriched with H2O2 and then finally dried with hot sterile air. In this way, especially moul ...

Set of bore hole cutters sizes from 18-30-32-35-55 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-45834-128

5ft General Purpose Fume Cupboard with Chemical Resistant Centrifugal Fan -The price is not inclusive of dismantling job, chimney, transportation, DOE certificate, etc. 5ft General Purpose Fume Cupboard 1500W x 920D x 2285H with Chemical Resistant Centrifugal Fan (With RN400 Fan 1 15% Casing, RN280 Impeller 24mm Bush (Yellow), 2.0 HP, 4 Pole, 3 Phase Motor, Fan Bracket & Motor Cowl) Currency: MYR PIC:  - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my

As good as new Bohle UV Adhesive Auction-ID: A1-46501-2209

Hettich Blue Max Cup Belt Drill Auction-ID: A1-46501-2621

Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos -Quantity: 1 device available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

Used cup filler made by HUGART, type: DS20000. New: 2003. This machine is designed for packaging food products in cups. TECHNICAL DESCRIPTION The HUGART DS20000 is a modern, eight-row machine used in the food industry for sealing a full range of food-processed products in plastic packaging. The machine's modern frame design, integrated with a slat conveyor, allows for the installation of a series of primary and secondary workstations for filling, sealing, grouping, and packaging cups into work packages. The use of servo drives allows for smooth adjustment of the machine's output, up to 20,000 packages per hour with capacities ranging from 0.125 liters to 0.5 liters. The machine's primary material is 0H18N9 chrome-nickel steel. The design of the frame and individual workstations is designed to meet the strict hygiene standards of the food industry. DS20000 PACKING MACHINE DIMENSIONS ...

Vacuum Suction Cups Manufacturer Nilfisk Type GB 726 Year of construction unknown Ready to use good condition Power 1900 W

Used Thermoforming Packing water cup line - 11500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete cup filling and packaging solution engineered for beverage production in water applications. The centerpiece is the TR-ALP 10 cup form-fill-seal machine, designed to thermoform, fill, seal, and cut PET cups with high efficiency. With a 5x2 format (10 cavities per cycle) and a working capacity of 17–20 cycles/min, the system achieves up to 12,000 cups/hour, ideal for second hand industrial packaging lines seeking reliable output. The integrated end-of-line equipment includes a robot cartoner, a case erector, a case sealer, and conveyors for smooth downstream handling.Production speed: up to 12,000 cups/hour (10,200–12,000 cups/hour typical)Cycle rate: 17–20 cycles/minCavity configuration: 5x2 (10 cavities per cycle)Punch size: 71 x 71 mmSuppo ...

workpiece length:350 mm work piece width:150 mm diameter:Tellerradius 200 mm tool taper:M32 x 1,5 spindle diameter:32 mm grinding width:max.450 mm turning speeds:3385 U/min work table::Höhe 1000 mm workpiece height max.:100 mm total power requirement:1,1 kW weight of the machine ca.:300 kg dimensions of the machine ca.:700 x 800 x 1170 mm

5-color R23847/15 PROPHETEER flexographic printing machine 18" Model: 1800 Built: 1998 available: immediately 5- Colors for labels and other products e.g. for cups / cups 18 Corona Car register Stacker Video Scanner Flat-in diameter: 1016 mm Available: immediately

Format: 740 x 1040 mm<br><br><br><br>br>Verf Gbar: Short-term

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

8-color format: 70 x 100 cm<br><br><br><><<br>Verf Gbar: Instant

4-color R23240/17 SHIKI label press Model: PC 45 M Built: 1992 Web width: 280 mm Availability: instantly 3 - coloured or 4 - coloured (optional) Printing width: 270 mm, min. 50 mm max. feed: 7, approx. 180 mm Accessories: Rolling unit for rollers up to 100 cm in diameter Winding unit for small rolls pneumatic remaline hole on both sides Speed: 7000 cycles/h max. Products: Hole edge adhesive labels, adhesive labels, hole edge cardboard labels, tickets with and without printing - can punch, print, embosse, number, perforate, punch Available: immediately

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

8-colours web width 342.6 mm 9 printing stations, 8 for watercolours straight toothed 1 UV (glue) station redeveloped and further expanded for printing on packaging monofilm from 30" expanded and further expanded for printing on adhesive label material up to 200 Ceramic anilox cylinder, for 120/18 to 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Colouring roller for full-surface colouring Cutting device for longitudinal sections Etc. Still in operation: Yes Available: immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

4-color format: 212 x 360 mm<br><br><br>Still in operation: Yes<br>

4-color format: 1300 mm<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br>Original numbering work for Heidelberg MO<br><br><br>

6 color size 800 mm<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately