cup filler used for sale

Used BOSCH GKF 400S capsule machine. New 1999. The device is technically efficient, very little used. Equipment dedicated to #0 capsules Areas of application of the GKF device: - Depending on the execution method, the GKF 400 capsule filling and closing device is used to fill capsules with powders, granules. - The machine is designed for a maximum throughput of 400 capsules per minute. The device was used in the GMP area. Made of stainless steel. Simple operation, very simple maintenance.

Can filler and seamer KHS / SEN / Ferrum with 32 filling valves and 6head seamer Capacity: approx. 15.000 cph Filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S 7 including Danfoss frequency inverter including beer pressure regulating valve including CIP dummies including CO2 injection before seaming and fixed for can type: 211 / 202 After reconditioning the filler and seamer will be in a condition like new.

Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap

Overview The filler was manufactured in 2004. It was used in a brewery in France during the last years. The complete brewery was sold to a company in Belgium. The filler is not needed anymore and therefore for sale. It can be used for filling beer and soft drinks. The machine is disassembled and properly stored. Tech Specs: Capacity: 2500 b/h at a Volume of 0,75 l/b 3300 b/h at a Volume of 0,33 l/b 20 rinsing nozzles 20 filling valves 3 capping elements Formats: 0,33l; 0,75l Working direction: clockwise

Overview The high vacuum solo filling machine was manufactured in 2006 by the Italian company Ocim. The machine is till now still in use in a factory in the Netherlands. As the production volume is increasing the machinery is replaced by machines with higher capacity. Consequently the machine will be available earliest in October 2022, when the new machines are installed. The machine is well maintained and in good condition. There are various bottle formats possible. Bottle format parts and technical documentation are included in the scope of supply. The machine is also suitable for oil. Tech Specs: Capacity: 2500 b/h at a Volume of 0,75 l/b 20 filling valves Formats: 0,25l; 0,50l; 0,75l; 1,0l; 1,75l Electronic valve pre-expulsion Working direction: clockwise

Overview The filler was manufactured in 1990 by the German manufacturer Nagema. It was completely overhauled/modernised and also equipped with a new control system in 2022. With the double pre evacuation system it is suitable for beer also besides other carbonated drinks. After the overhauling of the machine, it has not yet been used again. It was planned for a brewery project, where the owner now decided to shift his production to a contract bottler. Therefore the machine is now available for sale. It is properly stored in a warehouse. Technical Specification: Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel

Overview The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Tech Specs: Filling points: 2 Filling valve diameter: 13 mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry

Overview  The filler and capper block was manufactured in 2008 by the Italian company CFT. This machine can be used to fill edible oil into various containers (PET bottles or aluminum canisters).  Techn. details  Filler | CFT | RVAR 6/10 | 2008  Filling temperature: 10-30°C  Number of filling stations: 6  Processable formats:  Tinplate canisters: 1l, 3l, 5l PET bottles: 1l, 2l, 3l, 5l, 10l  Output:  3,500 bph - 1L PET Filling opening. 20 mm 3.000 bph - 2L PET with filling opening 28 mm 2,500 bph - 3L PET with filling opening 32 mm 2.500 bph - 5 L PET filling opening 40 mm 2,200 bph - 5 L perforation 32 mm 1,100 revolutions per hour - 10 L PET hole 40 mm Filling accuracy 1 σ = 0.6 g Machine pitch diameter 720 mm Machine pitch 377 mm Max. diagonal treatable container 220 mm Max. height of treatable container 460 mm Capper | CFT | TA / 3 | 2008  Application of plastic caps  Mac ...

Overview  The pressure filler was built in 2013 by the German manufacturer KHS. The pressure filler is still in use at a large German brewery and can be inspected at any time.  Technical data  Capacity: 22,000 - 65,000 bph  Number of filling stations: 168 Number of capping stations: 24  Pitch circle filler: 5040 mm Scope of delivery  Valve node Vacuum unit Hygienic inlet Fill level and closure inspection Rejection and rejection belt Technical documentation Incl. program backup Extensive transporters available, which can be purchased additionally

Overview  The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time.  Technical details  Number of filling places: 48  Pitch circle diameter: 1560 mm  Capacity (last):  250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized  160 - 200 bottles/ min at 250ml maple syrup  Used plastic cap can be applied by installed AROL capper  Dimensions  Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg   Electr. characteristics Voltage: 400 V - 50 Hz  Auxiliary voltage: 24 V DC  Installed power: 20 kW  Scope of delivery  Filler |  ...

Overview The Triblock consists of a rinser, filler and capper and was manufactured by Sasib/Sarcmi in 1993. It is an isobaric machine for the production of still and sparkling water or CSD. Techn. Details Capacity: 22.000 bph Worked formats: PET 0,45l & 0,66l Cap type: PCO 1881 plastic screw Number of rinser stations: 90 Number of filling stations: 90 Number of capping stations (AROL capper): 15 Rinsing machine with integrated recirculation system Filling with differential pressure system Filling machine equipped with star clutches with quick format change Capper equipped with quick format change Original mechanical filling valves brand Simonazzi Revamping of electrical panel with Siemens S7 E300 PLC Cap hopper not included

Filler volumetric More then 300 machines new and second hand on our seema .de

Filler: 25 ventilsCorker: 4 headsFormat parts: Sterne & Einlaufschnecke 0,25l-0,375l / 0,75l Schlegel-Bordeaux / 0,75l Burgunder / 1,00l / 1,50l More then 300 machines new and second hand on our seema .de

filling valves: 24 capacity / hour ca.: 4500 working direction: left-right filling system: vacuum filling Dim. L x W x H [m]: 1,8 x 2 x 2,4 Details: zentrale Höhenverstellung 1,80 Breit, 1,80 Tief, 2,50 Höhe More then 300 machines new and second hand on our seema .de

AVE monobloc rotary rinser filler capper, with 40 head rinser, 40- valve filler set up for neck handling and 12-head capper. Capacity 9,000 bottles/hour on 2 litre and 11,000 bottles/hour x 1 litre. Running direction left to right, pitch 145mm, with cap elevator set up to handle 38mm flat caps, fully enclosed machine, including top cover with Hepa (7) filter, complete with air conveyor infeed section, stainless steel control panel with Siemens S7 PLC. With 2 sets of change parts (1 Litre and 2 Litre), Video: https://youtu.be/9qQab4e-g-s filling valves: 40 capacity based on bottle type: 9.000 / 2ltr. bottles 11.000 / 1 ltr. bottles capping heads: 12 working direction: left-right  More then 300 machines new and second hand on our seema .de

left - right filling valves: 24 working direction: left-right Format Parts Bottle Size:73mm,87mm,103mm,109mm More then 300 machines new and second hand on our seema .de

Suitable for PET bottles 25 valves Filling pipes 18 mm Capacity: 5000 bph More then 300 machines new and second hand on our seema .de

automatischer Rinser / Filier / Verschließer Maschine; mit Rinser mit fester Düse; mit elektronischem Durchflussmesser Schraubverschließer; mit 40 Rinserzangen; mit 40 Füllventilen; mit 8 Kappenköpfe; Teilung 113,1 mm; Durchmesser 1440 mm; im Uhrzeigersinn Drehung; für Fruchtsaft bestimmt; Produktionskappe 12 000 Flaschen / Stunde; Füllungstemp 2-5 c; installierte Leistung 14 kW; Gasdruck 8-12 bar; Luftdruck 6-8 bar; Wasserdruck 3-4 bar; 24 V; elektrisch Anschluss 380 V; 50 hz; mit Kraftschrank 18 verschiedene Arten von natürlichem Saft mit und ohne Fruchtfleisch; kalte Füllung, Ultra sauber und folgende Kühlkette flache Kunststoff-Schraubkappe 38 mm More then 300 machines new and second hand on our seema .de

36 Füllventile; Laufrichtung: links-rechts. Maschinenmaße: L 3.200 x B 2.500 x H 2.700. Gewicht: 5.000 kg. Füllstellen: 36 Laufrichtung: links-rechts Gewicht in kg: 5000 Maße L x B x H [m]: 3200x2500x2700 More then 300 machines new and second hand on our seema .de

generalüberholt, Druckfüller Sparkling ,So2 Medium mit Vorevakuierung Füllstellen: 16 Laufrichtung: rechts-links (gegen UZS) More then 300 machines new and second hand on our seema .de

Can filler and seamer Ortmann + Herbst Hansacan 30 / 5 Type filler: Hansacan with 30 filing valves, year of manufacturing: 1992, Type seamer: Ferrum F 505 G with 5 closing stations, Year of manufacturing: 2010 Yapacity: 21.000 cph by 330 ml standard cans - product beer Yapacity: 24.000 cph by 330 ml standard cans - product CSD Can type: 211 / 202 Electric system: Siemens S 7 with touch panel The filler and seamer are in an absolute top conditon and still in production in a European brewery until January/Februay 2024

Overview The vacuum filler was manufactured in 2002 by Italian manufacturer GAI. It was previsouly used for wine and is already dismantled. Techn. Details Capacity: 6000 bph Format available for wine Rinsing stations: 24 Filling stations: 32 Capping stations: 6 Feed voltage: 380V Auxiliary Voltage: 24 V Frequency: 50 Hz Power: 7,5 kW

Rotary packaging machine manufactured by EFABIND, model R4. Specially designed for the process of positioning tubs, dosing and sealing of food liquids. Container measurements: diameter 95mm x 2 containers. It has a production capacity of 1000 – 8000 containers / hour. Made of stainless steel in its entirety. External measurements 2030mm wide x 1300mm deep x 2100mm high.

• For filling and sealing plastic tubes with heating jaws • Manual insertion and removal of tubes, further stations automatic operation • Stations: Filling, heating, sealing with embossing (1-line, max. 8 digits), cutting • Filling range 10-150 ml with piston dosing and rotary slide valve • Output approx. 100-800 tubes/h depending on product and filling quantity • Adjustable heating temperature • 10 tube holder cassettes for tube diam. max. 60 mm • Various tube holders for tube diam. 18, 22, 34, 36 and 40 mm • Electr. connection 220V/50Hz

• Hot-air welding for plastic and laminate tubes • 1 filling station, capacity 600-2,400 tubes/h, the maximum speed depends on the format and product • Tube lengths 50-245 mm depending on format parts • Tube diam. 10-50 mm depending on format parts • Tube input chute semi-automatic • Dosing 1-300 ml depending on pump cylinder • 1 pump cylinder for 25-300 ml • Tube alignment according to print mark • Filling nozzle diam. 37 mm with blow-off function • Tube welding/encoding and cooling station • Tube cutting station • Format parts for tube diam. 50, tube length 161 mm, of which cap height 23 mm • Product container made of s/s ( not shown on photos) • PLC Texas Instruments model 425 • Drive 380V/50Hz

• for aluminium tubes with twofold/fourfold seam • output max. 2.100 tubes/h, the maximum speed depends on the format and product • tube-Ø 10-40 according to change parts • tube length 50-250 mm • dosing 50-250 ml • product parts 1.4404 (AISI 316L) • 10 l filling funnel with stirrer • tube feeding magazine • tube orientation device • embossing device for max. 8 characters • change parts for tube diam. 20, 24 + 35 mm • discharge via chute • touch screen • PLC Hitachi EH-D40DTPS • batch printer • 400V/50Hz/14A • mobile • as good as new

Bottle filler, make Holdefleiss, with 16 filling valves.

Vemag Robby Sausage filler Serial: 1360652 Stainless sausage filler, vacuum filler, 100Kg stainless agitated hopper, additional sausage twist and link outfeed, comes with three different size nozzles and vacuum cup gaskets, digital screen controls, 3Ph

• Suppository production line for prefabricated plastic cast packaging • Working direction from right to left • Output max. 10,500 suppositories/h • Material of cast packaging PVC/PE, PS/PE, PVC/PVDC/PE • Dimensions of pouring packages: Container spacing 17.3 mm (pitch), container height 44-51 mm depending on format tools, standard version. • Casting packaging Roll material printed and unprinted, roll diam. 500 mm, pick-up diam. min. 100 mm • Available format parts for container heights 44 mm (1.1 g) and 51 mm (2 g) • Polystar 100 GE film sealing device for sealing the film ends • Contactor control • Drive 400V/50Hz Line consisting of: Filling machine Citopac SFD-10 CP • 2 filling stations, distance 17,3 mm • -osing range per filling point 0.5-3.5 ml • Dosing via heatable intermediate container 0.3 l and heatable tap head with rotary slide cont ...

Manufacturer: MG2 Model: AlternA70N Year: 2018 Video available in operation on request Mechanical operating speed: 70000 capsules / hour Mechanical movement: alternating / discontinu Available formats: size 0 and size 1 3 dosing discs for size 0 capsules (18 - 16.5 - 15 mm) Supplier maintenance beginning of October 2022 before machine availability Air flow rate consumed: 18-21 m3/h Minimum pressure 650 kPa Net weight of the machine: 950 kg

Monoblock for filling and sealing bottles. Capacity: 6000 bottles/hour in 370 ml Capacity: 7500 bottles/hour in 200 m Built in 1987 - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Equipment included : NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow box Filling tank + pump + heat exchanger + buffer tank before filling. 2 formats + spare parts available Machine controls : Detection of caps on bottles Fill level detection Minimum number of bottles (input) Max. number of vials (output) History, documentation and wiring diagram available; Spare parts available.

Forming, filling and sealing machine for yoghurt cups Original ERCA packaging machine (FFS - forming, filling, sealing) type RK3. This machine was reconditioned in 1998 by the company CMA. Nominal output: 21,000 pots per hour. It is equipped with a decoration unit. A cutting tool for standard 63x63 mm cups with two formats X4 and X6. Heating is by radiation. The automaton is a series 7 from Schneider. Out of production : 2017 The machine is complete and in good condition.

Complete line for bottles composed of : Depalletizer, unpacker, bottle blower, filler- screw capper, cartoner, carton labeller, case packer and palletizer. Equipment out of production in 2020 Documentation available + lots of spare parts for each machine. 2 formats available. Capacity : 6000 bottles/hour in 370 ml 7500 bottles/hour in 200 ml. Complete line for bottles composed of the following elements: PRB Depalletiser - Destratus R99214 Year: 2004 Installation of PRB in 2004 Depacker / Accumulation table St Gobain Debalpack 800 Year: 1986 NO LONGER AVAILABLE : IMA Mystral - Bottle Blower Y16 LB3023 Year: 2009 Monoblock filling / sealing bottles: IMA Farmomac F370 18VL 8C Filler + screw capper / sealer 3700026 Year: 1987 Refurbished in 2004 NO LONGER AVAILABLE : Flexlink conveyor and accumulation table Year: 2004 Cartoning machine CAM HF ...

- Current format: capsule size 0 - 48 posts - Max capacity: 200,000 capsules / hour - Automatic checking weight - Year:? 2001 and full revamping in 2011 / 12 - spare parts available. - All documentation and pharmaceutical qualification files available

Automatic Aerosol filling and crimping machine. Spray bottle equipment. Cycle = Blowing / Product filling / Valve installation / Valve crimping / Gas filling / Pressure control / Pump installation / Cover installation - Aerosol 30 ml - Current format: 30 ml filling on bottles d.43 x h.86 mm, valve neck 20 mm - Dosing with Hibar pumps HDB-2B-CV - Cap / cover installation - RNA bowl feeding valves + caps - Double index - Capacity: approx. 70 units / minute - year 1993 - Continuous control by PLC - 18 position tray + technical file available on request - Plan entry/exit conveyor belt Perfect line for all pump spray product.

Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, built 1994.

Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW

Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW

The BX series machine is a high-speed intermittent operation vertical filling sealing machine. Its maximum speed is 100 bags per minute. Servo driven end seal jaws operating and transporting the film PLC controller with touch screen interface for easy operation Hot printer and film feeding system work together synchronously One-piece bag former, quick change, no tools needed Exact warning function for product taken Photo sensor for automatic tracking of eye marks Stainless steel for excellent durability and hygiene

Plastic Tube Filling; Norden NM 2002 DF Model: NM2002DF Year of construction:1988 Machine is versatile enough to meet the demands of pharmaceutical, cosmetic, tooth-paste and food environments. Quick and precise dosing solutions for both high and low viscosity products. Ideal for the precise filling of creams, pastes and gel products in tubes. (mayonnaise,tomato puree,ketchup etc.) Complete line formation with current set up for a tooth-paste production with transfer system between filler/cartoner,cassette infeed, conveyor belts and packaging robot. Technical Data Norden Nm2002DF: Filling volume 1–300 ml Production speed: up to 200 tubes per minute Materials: stainless steel and aluminium Hot Air sealing unit for plastic, plastic-laminated Automatic level control Dimensions (L x W x H): 3400mm x 1600mm x 2250mm Weight: approx. 5700 kg Condition: as good as  ...

Horizontal fully automatic machine for 3-edge and 4-edge sealed pouches for filling and packaging powdery products in double pouch operation (with perforation): • Format range double bags (W x H) min. (2x50) x 260 mm, max. (2x80) x 260 mm • Output max. 100 double bags/min (depending on bag size) • Screw dosing SD 70/2 for double bags • Main dosing min. / max. 2.5 - 90 g per bag • Micro-dosing min. / max. 0.3 - 5 g • Max. Roll diam. 600 mm • Core diam. 76 mm • Max. Roll width 520 mm • Gluing table with splice detection • 2 pcs. Thermal transfer printer Allen Coding 5 line cliché, individually switchable • Longitudinal and cross seam hot sealing tool, head seam hot sealing tool • Sealing stations manually adjustable • Print mark control • Tear aid with a needle • Bag inflator • Bag opening control • Filling nozzle • Trickle protection by sheet shear  ...

Consisting of: - Rinser 20 nozzles  - Filler 20 valves - Natural corker for 3 heads  - Screw capper for3 heads 28x32 MCA Capacity: 3500 bph More then 300 machines new and second hand on our seema .de

Borelli RMC10 rotary filler suitable for filling glass bottles Machine is in excellent condition Standard 10 head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Plus filler in feed scroll and bottle handling parts for Bordeaux glass bottles. Immaculate condition and perfect working order. No problems since new. Max Fill rate 1500 bottle/hour, 1300 litres/hour

T 190 | FILLER VIR MAURI FOR DISTILLATES Year: N/A Speed: 2.200 bph Direction: Clockwise Model: PAVONIS 16 16 valves Safety protections

T 189 | FILLER VIRMAURI Year: n/a Speed: 9.000 bph Direction: Clockwise Number of valves: 36 Type of filling: isobaric Self-leveling De-gassing

Volumetric filler with 21 filling valves and 4head Sima seamer capacity: 10.000 cph

Modular tube filler for pharmaceutical, cosmetic, chemical and food products. The modular concept allows it to grow along with customer needs, an initial configuration can be completed with automatic tube loading, device and tube print registration, manual or automatic tube feeding, heat sealing of plastic and laminated tubes. by means of hot jaws, compact operator panel, suitable for memorizing the working parameters. Tube diameter from 28 to 55 mm. Dosing capacity from 3 ml to 240 ml. Characteristics Model: COMBI Year 2002 Width: 1150mm Height: 2300mm Length: 2000mm Tube diameter from 28 to 55 mm Dosing capacity from 3 ml to 240 ml

FARMOMAC rotary 18-piston filler in stainless steel Description It represents an optimal solution for the filling of glass bottles, metal or PET plastic with dense or semi-dense products, they can also contain solid parts (concentrate and tomato sauce, ketchup, mayonnaise, mustard, bolognese sauce, pâté, jam, purees, creams, baby food, etc. Feeding after conveyor belt for the travel of the bottles and transferred star that positions the bottles under the filling dispensers.The product dose is configured from the electrical panel by means of a motorized cam based on the type Once the format is changed, the precision of the dose can be reached in case of need, acting from the operator panel When the bottle has been filled, it is transferred by star on the output conveyor (which is the same one of feeding) and it is sent to the successive machines Model: F-340 Production: 5,000 l / h  ...

Triblock isobaric filler mod. 12-12-5 consisting of 12 rinsing tongs, 12 filling straws, 5 capping heads with 26 crowns. The fully automated machine can also be put in line complete with: bottle drive motor at the entrance, Samung touch screen plc panel for managing the machine functionality in manual / automatic mode, format change from 100 ml to 1000 ml glass n ° 1 spare Siemens inverter, set of original spare gaskets. Year of construction December 2017 Speed up to 1,500 bottles / h beer / sparkling water / still water / wine. The machine will be decommissioned from the line in mid-April.

MONOBLOCK filling and closing of vials/bottles 4 filling stations Change parts for bottle-dia 32 x h 64,7 mm, dia 38 x h 87,5 mm, dia 49 x h 114,5 mm und dia 61,7 x h 124,4 mm PLC Klöckner Möller and touchscreen