cummins engine used for sale

3.6-liter 4-cylinder turbodiesel with intercooling. Included: Accessories Auction-ID: A1-51321-5

3.6-liter 4-cylinder turbodiesel with intercooling. Included: Accessories Auction-ID: A1-51321-7

Degree of protection: IP 54 (dust and splash proof) Rated voltage: 400 / 230 V (50 Hz) Battery type: 2x 12 V / 42 Ah (10EP) Battery voltage / capacity: 24 V / 42 Ah Included: 6 cylinder Doosan diesel engine Engine.Number: Edipa 218385 Year of Make: 2012 294 kW 1 x 400 litre diesel tank 1 x KSB sprinkler pump, type: MX 150-200 Auction-ID: A1-51285-331

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C, with motor EMF 0.37 kW Auction-ID: A1-51321-65

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm : 210 mm : 1000 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Yamaha Rivage PM5 – Digital Mixing System: CS-R5 Control Surface + DSP-RX Motor with HY144-D Dante Board Manufacturer: Yamaha Model: Rivage PM5 (CS-R5 Surface + DSP-RX Engine) Purchase: Purchased new on 24/06/2021, first hand Use: 2 to 3 times per year Firmware: V6.71 (console and DSP) DSP-RX engine 120 input channels 48 mix buses + 24 dies HY144-D Dante board installed Mounted in a 19\" wheeled rack flight case with power distribution (Samson PowerBrite PB11 conditioner + power strip), lock drawer and wiring CS-R5 control surface 3 touch screens 8 mic/line inputs and 8 local outputs Supplied in its own wheeled flight caseComposition of the lot: CS-R5 surface, DSP-RX motor with HY144-D board, 2 wheeled flight cases, electrical distribution and wiring. Sold as shown in the photos. Disassembly and loading are to be arranged by the buyer, who provides suitable transport and  ...

Compost turner Willibald TBU AM Compost pile turner/ compost turner for restacking trapezoidal compost heaps up to 3 m high Perkins own diesel engine 128 kW Working speed approx. 0.5 - 1 km/h Working height up to 3 m  Working capacity approx. 650 - 1,000 m³/h Mounts for Volvo L70-90 (120) Weight approx. 2,700 kg Good, ready for use Net price from location 21,500,-- € + VAT Sale from Saxony location Q32

For testing and tuning engines Working CO Analysis Cabinet fully functional Auction-ID: A3-46110-9425

Kubota engine 2 cylinder diesel engine Type z482 Engine does not run due to too little compression Total operating hours 60 Incl starter motor and then alternator and v belt Auction-ID: A1-40333-51

Only 1.6 operating hours Auction-ID: A3-46111-18646

Equipped with: Deutz AG, F4L 2011, code: CE47,8, serial number: 10421006, power: 47,8 kW (≈ 64 HP), speed: 2800 rpm, displacement: 3,109 litres, injection rate (Fuel Rate): 42,5 mm³/stroke, valve position: Inlet 0,30 mm, Exhaust 0,50 mm, country of production: Germany, Dimensions: 75 × 60 × 80 cm (L × W × H) Auction-ID: A1-47396-2281

Equipped with: Deutz, type: F3L 1011F, engine power: 32.0 kW (approx. 43 HP) @ 2100 rpm, engine number: 00349723 Auction-ID: A1-47396-2282

Thickness measuring system under different pressures THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-206

Mantis Elite VISION Engineering Stereoscopic Microscope LOD'AIR Auction-ID: A1-51527-154

1999 Hyster H4.00XL6 LPG Lift Truck – 3,200kg – Duplex 4,750mm – Fork Positioner/Side Shift – Engine Loose Heavy duty Hyster H4.00XL6 LPG forklift, built in 1999, equipped with high duplex mast and Little Giant hydraulic double fork positioner with integrated sideshift. The motor has been disassembled and is supplied separately. Specifications: Brand: Hyster Type: H4.00XL6 Year of construction: 1999 Serial Number: G005A11904W Fuel: LPG / gas Hours: approx. 5,800 hours, read, not guaranteed Engine according to model specification: GM V6 4.3 litre LPG Engine power according to model specification: approx. 65.2 kW / 89 hp Nominal capacity base model: 4,000 kg at 500 mm load center Lifting capacity in current version: approx. 3,200 kg at 600 mm load centre Mast: duplex Maximum lifting height: approx. 4,750 mm Minimum drive-through/mast height: approx. 3,260 mm Fo ...

Auction-ID: A1-51527-126

Prvomajska Raša D480 Conventional Engine Lathe Manufacturer: Prvomajska Raša Model: D480 Equipment type: Conventional Engine Lathe Year: 1983 Serial number: P1925.0765-06 Reference number: 319086 Heavy-duty conventional metalworking lathe designed for turning, facing, boring, threading and related machining operations on cylindrical workpieces. Technical specifications: Working length: 2,000 mm Electrical supply: 380 V, 3-phase, 50 Hz Rated current: 26 A Fuse rating: 35 A Equipment / features: Tailstock Longitudinal carriage Cross slide Tool post Manual operating controls Important: Machine is supplied without chuck. Approx. dimensions (L × W × H): 3,800 × 1,200 × 1,500 mm Approx. weight: 3,000 kg Condition: Used. Main machine structure, carriage, cross slide, tool post and tailstock are present. Spindle, gearbox, feeds, bearings, electric ...

L & Z lathe / WEILER CONDOR AC / Stepless speed regulation / FROM A TRAINING FACILITY - CE - Marking -Year of manufacture 2000 -Turning diameter over face slide 180mm -Tip height 165mm -Max. turning diameter 330mm -Turning length approx. 800mm -Speed (infinitely variable) max. 2800 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch etc. -Three-jaw chuck -Tailstock -Swarf back wall -Machine light -Multifix base holder & 6x inserts -Various interchangeable wheels -Coolant device -Miscellaneous operating tools -Documentation Dimensions: LxWxH 1.8x1x1.8 meters / Weight 1300Kg

VISION Engineering EVO Cam EVO CAM II High Definition Digital Microscope THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-43

Chiller powered by gas engine. Operation unknown. Auction-ID: A1-42990-27

: 0554 mm : 370 mm : 3000 mm : 280 mm : 104 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lot comprising 2 gas cogeneration engines. Engine: Make: Rolls-Royce Model: KVGS18G4.3 Power: 3,465 kW per engine Year: 1999 Generator: Make: Leroy-Somer Model: LSA 56 BM65-6P Power: 3,332 kW per generator Operating hours: Engine 1 Total operating hours: 99,315 h Hours since last overhaul: 14,837 h Hours remaining until next major inspection: 3,010 h Engine 4 Total operating hours: 99,412 h Hours since last overhaul: 15,315 h Hours remaining until next major inspection: 4,953 h Both engine-generator sets are offered together in one lot. Auction-ID: A1-51596-1

Key data: 140 mm, 250 mm, 3000 U/min

Well-preserved precision lathe with extensive equipment

Auction-ID: A3-46114-22217

New F5HFL414D Perkins diesel engine with a displacement of 3.4 litres and an output of 83 kW (approx. 113 hp) at 2,200 rpm. Engine sold complete with particulate filter, ECM (engine control module), starter motor and alternator, as well as the various elements and accessories visible in the photos. Mint condition, never used. Auction-ID: A3-46114-36387

turning diameter over bed: 820 mm turning diameter over slide rest: 575 mm turning length: 1.500 mm turning diameter in the gap: 1.040 mm center height over bed: 400 mm centre distance: 1.600 mm bed width: 560 mm spindle taper: KK 11 CAMLOCK DIN 55022 spindle bore: 128 mm workpiece weight: 2.800 kg 3-jaw-chuck diameter: 400 mm turning speed range: 5,6 – 1120 U/min power requirement: 18,5 kW taper in tailstock-quill: MK 6 dia. of quill: 100 mm quill stroke: 240 mm voltage: 400 V total power requirement: 20,0 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 4,30 x 1,50 x 1,50 m Coolant Tank: 1,80 x 1,10 x 0,20 m - Serial-No.: 1049.2007.07 - Powered top support - RÖHM 3-jaw wedge-type chuck - Quick-change tool holder - Quick-action drill chuck, Ø 1–13 mm - Coolant system - Machine light The data for this ad was created with ModulMWS - the software solution of LogoT ...

Good used OM615 engine, would have been overhauled by previous owner. See video. Auction-ID: A1-47369-1012

Used Ford 2722E Marine, acquired by trade-in. The engine is complete with gearbox and dashboard, it is not stuck. Auction-ID: A1-47369-1024

Mitsubishi S4L Refurbished long block without accessories Auction-ID: A1-47369-1020

New London Engineering 500-9-22’6 Elevated Conveyor (2014) 230 mm wide, 6.9 m hinged-steel-belt elevating conveyor Auction-ID: A1-51927-107

Sole mini 12 Marine engine with dashboard, gearbox and spare parts. Auction-ID: A1-47369-1021

Equipped with: Diesel engine Deutz 2 cylinder diesel. HIAB hydraulic loader crane type 852-2235A, serial number 1010, built in 1980, equipped with hydraulic extension boom and swivel device, with an estimated dead weight of 2,000-2,500 kg, a working range of approximately 6-8 m and a lifting capacity of approximately 3,000-5,000 kg depending on the flight. transport dimensions of approximately 4.0 x 2.2 x 2.4 m (LxWxH), Auction-ID: A1-47397-1774

7 Pieces new Honda GX270UT2X SXQ4 R-280 Honda GX270UT2X SXQ4 – Reliable petrol engine for demanding applications The Honda GX270UT2X SXQ4 is a compact, air-cooled 4-stroke petrol engine known for its exceptional reliability and long-lasting performance. With a displacement of 270 cm³, this engine delivers 6.2 kW (8.3 HP), making it ideal for professional use in pumps, generators and other heavy-duty applications. Brand: Honda Product number: GX270UT2X SXQ4 Original Number: GX270UT2X-SX-Q4-OH Fuel Type: Gasoline Capacity: 270 cm³ Number of cylinders: 1 Power: 6.2 kW Maximum power: 8.3 HP Rated speed: 3,850 r/min Cooling type: Air Crankshaft type: Straight Crankshaft length: 60 mm Crankshaft diameter: 25 mm Crankshaft position: Horizontal Starting system: Manual start Flywheel Type: Heavy Fuel tank capacity: 5.3 l With fuel tank: Yes With exhaust: Yes Oil Shielding: Yes Oil filter:  ...

A total of 2 pieces: electric motor and gear motor. Electric motor: power approx. 7.5 kW, Voltage approx. 400 V. Gear motor: power approx. 0.37 kW. For more details, see photos. Auction-ID: A7-51948-173

equipped with suction hose with suction strain, Rovatti pump Auction-ID: A1-50597-22

The tank cleaning line: -brand: Co-Enginering -year of construction: 1999 -s/n.: 3343 with: -1 chain conveyor -1 washing machine incl. tank nozzle - Operating system Clark electric stacker: -Type CPS 12 AC -Year of construction 2012 -Serial number 035989 -Lifting capacity 1,200 kg -Maximum lifting height 1,565 mm (156.5 cm) -Load center 600 mm -Drive Electric -Battery voltage 24 V -Own weight without battery 585 kg -Battery weight 124–175 kg Auction-ID: A1-50943-22

Uncertain operation; engine-electric problem. 1600 kg capacity, 4450 mm lifting height, 2008, serial F001B05213F, Mazda LPG engine, Automatic transmission, 900 mm forks. Sold as inspected, without warranty. Please review the photographs and arrange an inspection before bidding. Auction-ID: A1-51472-56

Contract Item 5.14, ATMP250 This lot belongs to ANDRITZ's industrial ATMP-250 (Advanced Thermo-Mechanical Pulp) plant, which was acquired as part of a project from 2018/2019. The plant was designed for the production of mechanical pulp. Auction-ID: A1-51939-643

JA Engineering Bottle Filler 8000 –Pneumatic 2-cup filling machine -Industrial filling machine from the brand JA Engineering -type Vial filler 8000 Technical specifications: -Setting: Manually adjustable dosing strokes -Construction: Stainless steel frame -Equipped with: Pneumatic cylinders, adjustable dosing units, hoses -control box Wim'O-matic -Base: Mobile, equipped with castors Auction-ID: A1-50943-48

- Toyota Forklift / Forklift - Propulsion: Gas / LPG - Engine: Toyota 4P gas engine - Engine number: 4P0004697 - Serial number: 11045 - Operating weight: approx. 2.6 t - Equipped with Kaup lifting device - Lift mast with hydraulic lifting function - Fork carriage with two forks - Pneumatic tyres - Overhead guard - Driver's seat with seat belt - Lighting and exterior mirrors available - Manual control levers for travel and hydraulic functions - Rear-mounted gas cylinder - Classic Toyota instrumentation - Paintwork: Red - Visible signs of wear due to age and service life - Paint chips, scratches and corrosion build-up, especially on the lift mast, forks and bodywork - Forks with clear superficial traces of rust and wear - Engine compartment and aggregates with age-appropriate soiling - Tires optically used - Seat and controls with signs of wear - Year of construction and ...

Kubota D1105 engine, with hydraulic quick coupler, hi low speed, plunger pump Auction-ID: A1-40422-47

turning diameter over bed: 320 mm turning diameter over slide rest: 190 mm turning length: 920 mm center height over bed: 160 mm turning diameter in the gap: 430 mm centre distance: 920 mm spindle bore: Ø 38 mm turning speed range: 65 - 1800 U/min power requirement: 1,5 kW 3-jaw-chuck diameter: 160 mm taper in tailstock-quill: MK 3 quill stroke: 100 mm voltage: 400 V weight of the machine ca.: 410 kg dimensions of the machine ca.: 1,68 x 0,75 x 1,55 m Serial No. 531208 Year of manufacture 05/2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Probably defective Incl. accessories and pallet Auction-ID: A1-51519-1118

Probably defective Incl. accessories and pallet Auction-ID: A1-51519-1117

engine lathe, year 1990. Used machine. More info & price on IndustrialBuyer.

Complete reconditioned Caterpillar C11 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , B5K: 3107920 3730063, B5Z: 3107920 3730063, GLS: 2364572 2364577 2364580 3271010 3606751 3606752 3606754 3606759 3684919 3684920 3701712, HRA: 2364572 2364577 2364580 3271010 3606751 3606752 3606754 3606759 3684919 3684920 3701712, KCA: 2292631 2292633 2292634 2292653 2382017 2539024 2539027 2539028 , RSX: 2256468 2258846 2269770 2278353 2284410 2295463 2297195 2347845 2347848 2347850 2353499 2528061 2624153 2636681 2865803 2916601 2929282 2929283 3082736 3494468 3494470 3494471 3494472 3497446 3526169 3662130 3662131 39 ...

Reconditioned Caterpillar 3116 long-block engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 45V; Gross weight [kg]: 950; Engine: CATERPILLAR 3204

Complete reconditioned Caterpillar 3304 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 02B: 7N3272, 05B: 7N3278, 07Z: 1167579 1259359 1259360 1266209 1298178 1322010 0W0178 0W2002 0W2254 0Z7504 2W1876 2W3989 2W4485 2Y8607 2Y8609 3Q5155 4P2393 4P2394 4P4246 4P4247 4P4253 4P5557 4P9154 4P9308 4Q5014 4Q5161 5R4901 5R5450 9Y1721 9Y3047 0Z7863 0Z8210 1079408 1079409 1079410 1157533, 09Z: 1167590 1167591 1167592 1167598 1W4584 2W0098 2W4485 2W6099 2W6100 4P0903, 10E: 1118013 1118014 2310150 1W3871 1W3875 1W3876 1W3877 1W3880 1W3883 1W3885 4W3918 4W6878 4W7765 9Y6208, 12Z: 602529 1148904 0Z8258 1N3062 1N3063 1W4 ...

Complete reconditioned Caterpillar 3306 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 08Z: 1373598 2123756 0W0997 0W1007 0W1766 0Z5948 0Z7485 0Z7500 0Z7665 0Z7771 0Z7860 0Z7900 0Z7915 0Z9864 1N3060 1N3061 1W0542 1W0543 1W0544 1W1342 1W1344 1W1346 1W2630 1W3210 1W3225 1W3231 1W5821 1W6092 1W6093 1W9098 2W0817 2W0818 2W0819 2W0820 2W4483 2W4486 3Q5034 3Q5466 3Q5755 3Q5767 3Q6852 4P7467 4Q5200 4W8491 5C5604 5C6813 5R6935 5R7776 5R7814 5R7956 5Z4836 5Z5151 5Z5168 5Z5358 5Z5912 5Z6635 5Z6854 5Z7500 5Z7665 5Z7860 5Z7900 5Z7915 5Z8438 5Z9020 5Z9864 5Z9904 5Z9917 6N3055 6N5908 6Z7065 7C0501 7C1426 7C1959 7C2032  ...