ctp system heidelberg used for sale

An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible.

A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible.

Tank volume: 350l, permissible operating pressure: 6bar, permissible operating temperature: 90°C, motor manufacturer: Röchling, motor type: A3, fluid grease quantity: 1kg.

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

Incro BelugaYear of manuf. : 2021 ____________Description:Technical Data:Capacity (max.):2.500 l/h

without pallets Auction-ID: A7-46300-50

According to photos, weight estimated Stainless steel pipes need to be replaced, Auction-ID: A1-45666-23

Spray booth designed for painting and finishing, featuring a water curtain and integrated extraction system for efficient particle capture and a clean working environment. Auction-ID: A7-46462-31

According to photos, weight estimated. Tools included in the stacks 2 inverters are defective Auction-ID: A1-45666-18

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-22

Used for extracting dust and particles during production. Auction-ID: A7-46462-28

In stock on pallet, total dimensions approx. 1200x800x1150 Auction-ID: A1-45790-586

Key data: 7500 m³/h, 4 kPa, 8 kW

TEKA Filtercube 4H Welding Fume Extraction with Siemens Control & Spark Trap (built in 2021) For sale is a high-quality TEKA Filtercube 4H welding fume extraction system including Siemens control and integrated spark trap. The facility is in very good, well-maintained condition and has been regularly professionally maintained. It was reliable in industrial use until the end. Technical data: Manufacturer: TEKA Model: Filtercube 4H Year of Make: 2021 Power: 7.5 kW Volume flow: 4,800 m³/h Negative pressure: 18 mbar (1.8 kPa) Control: Siemens Control Integrated spark trap Scope of delivery: TEKA Filtercube 4H extraction system Integrated spark trap Siemens Control Not included: Extraction arms Piping / Piping System Condition & Use: Very good, well-maintained condition Regularly serviced Fully functional and ready to use Ideal for industrial welding fume ...

Linear decanter with gate-fuse, manufactured by Trepovi. GRP construction according to technical drawing. Approximate weight: 390 kg. Dimensions: 2115 mm (length) x 1210 mm (width) x 1510 mm (height). Suitable for solid-liquid separation processes. 3.5m3/h Includes inlet and outlet mouths, fuse-type gate and structural support. Designed for fixed installation in treatment or purification lines. Manufacture year 2023 – Serial number: 5180. Delivery conditions: EXW (equipment available for collection at origin). Auction-ID: A7-46053-44

Complete coolant system Coolant tank 16 l Connection voltage 230 V Motor power 90 watts see pictures Condition: never used / new (5) Auction-ID: A7-46460-596

Auction-ID: A3-43525-5094

Technical data Manufacturer: Hydrotechnics Model: Multi System 5000 Device Type: Hydraulic Gauge / Data Logger Advertisement: Digital display Operation: Membrane keypad with numeric keypad Configuration Scope: Meter, USB-CAN adapter cable, service CD, connection cable (packaged) Application: Measurement, storage and documentation of measured values on hydraulic systems Auction-ID: A1-46480-2021

Parker Oil Cooler 2 pieces - small LAC2-007-4-D 1 piece - large LAC2-016-4-D used, Ready to use 1000€ each

Robust stop and roller conveyor of 3 meters long for profile and steel processing, executed in heavy industrial construction and suitable for supporting, positioning and guiding long workpieces. This arrangement is particularly interesting as a supply or discharge support for metalworking machines, such as profile punches, cutting machines, sawing systems or other machines for steel construction and workshop work. The installation is equipped with multiple steel rollers, an adjustable mechanical stop carriage and an integrated graduation on the guide rail, allowing workpieces to be positioned accurately and repeatably adjusted to length. Thanks to its heavy-duty design and generous length, this roller conveyor is extremely suitable for processing long profiles, tubes, strips and other steel products. The setup offers practical added value in workshops where efficiency, support and dimen ...

Single-end machine for cleaning glass bottles., Additional title: Bottle washing machine, Capacity: 3000 bottles/h, Length: 4,43 m, Width: 2,60 m, Height: 2,52 m, Base construction: Single-end machine, Features: Feed table; bottle feed; pressure filter; side window; heat exchanger; overflow pump; lye pump; water pumps; temperature gauges; control cabinet with control panel

Hänel Rotomat 400 Paternoster The Hänel Rotomat 400 is a vertical carousel (paternoster) that works according to the principle of "goods to the user" and is used both for industrial storage and as an office lift for archiving. The system makes optimal use of the available room height to maximize storage space in a minimum footprint. Areas of application The Hänel Rotomat 400 is used across all industries: Industry: For the storage of tools, measuring instruments, electronic components and small parts. Office & Administration: As an automatic archiving system for hanging files or file folders. Medical: For the sterile storage of surgical instruments. Overall dimension L: 260 cm Overall dimension B: 130 cm Overall dimensions H: 285 cm Permissible. Shelf load: 150 kg Connected loads: 3~ N+PE 400V / 50HZ/ 5.5 KW Year: 2004 Dismantling and removal by buyers Dism ...

A Bous spray cleaning system is available. Usable space dimensions X/Y/Z: 470mm/650mm/300mm, max. material weight: 100kg, filling quantity: 500l, max. temperature: 70°C, heating capacity: 18kW, exhaust connection diameter: 108mm, drying capacity: 11kW, weight: approx. 1600kg. Including loading station and oil separator. Documentation available. An on-site inspection is possible.

A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible.

Plasma cutting machine Microstep SPL-P 3001.15, built in 2011 Working area 1500x3000 mm, cuts steel, stainless steel and aluminum, incl. software, incl. plasma source Kjellberg HiFocus 161i with automatic gas console, pressure reducer and Extraction Donaldson Torit DCE for outdoor installation. Last major maintenance at the end of 2024 The plant has already been dismantled , loading is possible.

Year : 2001 Thermal stripping machine for cleaning parts covered with plastic, paint such as dies, nozzles, filters. The combustion chamber is heated to approximately 420 degrees. The metal parts to be cleaned are placed in a basket which is introduced into the preheated cleaning chamber. Perfect cleaning for a cycle time of 90 to 150 min. Dimensions of the cleaning chamber: diameter 220 mm and Length: 350 mm Dimensions of the basket : diameter 210 mm and length: 260 mm Dimensions (L x W x H) : 0,90m x 0,70m x 1,60m Weight : 120 kg

New Victron Energy Storage System – 3 kVA MultiPlus-II with 15 kWh LFP Battery On offer is a fully installed and programmed energy storage system from Victron Energy, consisting of a 3 kVA MultiPlus-II inverter/charger in combination with a 15 kWh lithium iron phosphate (LFP) battery. This system is ideal as a home battery, for solar energy storage, emergency power supply or off-grid and hybrid installations. Thanks to the high efficiency and long lifespan of the LFP battery, this is a reliable and future-proof energy solution. ✅ Benefits 3 kVA Victron MultiPlus-II inverter/charger 15 kWh LFP battery: safe, low-maintenance and long lifespan Suitable for on-grid, hybrid and off-grid applications Smart energy management and monitoring possible (VRM) Professional quality for private and business use Very interesting for installers, companies and individuals who are looking for ...

Type: Industrial Robot with Controller and Pneumatic System Brand: Kawasaki / Tiesse Robot Application: Automated handling / pick & place / industrial manipulation Equipment: - Multi-axis industrial robot arm - Base pedestal mounting - Kawasaki robot controller cabinet - Pneumatic system with filters and pressure regulators - Compressed air tank - Vacuum / gripper interface (end effector plate present, tooling incomplete) - Control panel with start/stop and emergency stop - Cabling and hoses included Technical Data: Power supply: 3-phase, approx. 400 V Frequency: 50 Hz Controller: Kawasaki Robot Controller Condition: Used Auction-ID: A7-45993-74

Amersham / GE AKTA HPLC Chromatography System, UV900, P900, pH/C900 • 2× pH/C-900 monitor (pH and conductivity measurement) • 2× P-900 High Pressure Pump • 1× UV-900 UV/Vis detector • Original control units with display & rotary knob • Original housing modules (stackable) Auction-ID: A7-46327-56

New Victron Energy Storage System – Victron Multi RS Solar with 15 kWh LFP Battery Offered is a fully installed and programmed energy storage system from Victron Energy, consisting of a Multi RS Solar inverter/charger/mppt in combination with a 15 kWh lithium iron phosphate (LFP) battery. This system is ideal as a home battery, for solar energy storage, emergency power supply or off-grid and hybrid installations. Thanks to the high efficiency and long lifespan of the LFP battery, this is a reliable and future-proof energy solution. ✅ Benefits Victron Multi RS Solar inverter/charger/mppt Direct connection for PV panels, 3kWp per tracker, 2 trackers available. Direct DC charge in battery, less loss. 15 kWh LFP battery: safe, low-maintenance and long lifespan Suitable for on-grid, hybrid and off-grid applications Smart energy management and monitoring possible (VRM) Professi ...

Felder Clean Air Extraction Unit RL 350 – High Performance Line with additional 2nd drawer for chip pick-up with additional plastic bags for chips Technical data: Manufacturer: Felder Model: RL 350 Type: Mobile clean air extraction device (dust extractor) Suction connection Ø: 350 mm Max. volume flow: 8,000 m³/h Nominal volume flow (20 m/s): 6,950 m³/h Negative pressure (max.): 2,630 Pa Motor power: 11 kW (15 hp) / 3x 400V, 50Hz Filter area: 71 m² (cartridge filter) Residual dust content: < 0.1 mg/m³ (H3 test certified) Chip volume: 2 x 250 litres (chip collection container) Cleaning: Automatic JET filter cleaning Special features: Integrated silencer, compressed air connection, incl. extinguishing device Dimensions (L/W/H): approx. 2640 x 1140 x 2260 mm Condition: functional, clean, 100% reliable Industrial extraction unit in robust metal construction. H3 dust tested. Idea ...

New Victron Energy Storage System – 4K5 MultiPlus-II with 15 kWh LFP Battery Offered is a fully installed and programmed energy storage system from Victron Energy, consisting of a 4K5 MultiPlus-II inverter/charger in combination with a 15 kWh lithium iron phosphate (LFP) battery. This system is ideal as a home battery, for solar energy storage, emergency power supply or off-grid and hybrid installations. Thanks to the high efficiency and long lifespan of the LFP battery, this is a reliable and future-proof energy solution. ✅ Benefits 4K5Victron MultiPlus-II inverter/charger 15 kWh LFP battery: safe, low-maintenance and long lifespan Suitable for on-grid, hybrid and off-grid applications Smart energy management and monitoring possible (VRM) Professional quality for private and business use Very interesting for installers, companies and individuals who are looking for high-qu ...

Unchecked from practice Closure Auction-ID: A7-46327-64

Security set with 4 cameras and a recorder. network video recorder / 16 ports DWL-NVR16P 2x small IP camera DWL-BF01 1x Large Camera DWL-BM02, 1x Sphere Camera DWL-DVV03, 1x Small Sphere Camera DWL-DFV02 with Mounting Bracket Unused in box Auction-ID: A1-40418-60

Auction-ID: A1-41995-143

Unaudited Auction-ID: A7-46327-83

Equipped with 2 HL500 electric winches; including mounting brackets; rail length 4000mm; Auction-ID: A1-40137-355

Equipped with: bidding panel, hooklift lift, forced steered, leaf springs, lighting, Dutch registration, jaw coupling, hydraulic function at the hook Auction-ID: A1-40137-59

Type: Laser Marking System / Laser Workstation Brand: Rofin Model: StarMark 100 Execution: - Industrial laser marking workstation - Enclosed processing chamber with safety doors - Integrated binocular microscope for positioning - Motorized X-Y working table with T-slots - External rotary indexing table with multiple fixtures - Separate laser source cabinet - Monitor-based control system Technical data (from nameplate): - Laser type: Nd:YAG - Wavelength: 1064 nm - Laser power: 100 W - Voltage: 230 V - Frequency: 50 Hz Features: - Precision laser marking / engraving - Suitable for metals and technical materials - Rotary table for serial production / indexing - Visual alignment via microscope - Programmable pulse settings (Pulse 1–3 modes) Condition: Used Auction-ID: A7-45993-91

Megatron Cool is a microprocessor-controlled ophthalmological system for the anterior and posterior segments of the eye. With the Phaco technique used, the emitted ultrasound energy is significantly reduced compared to the traditional pulse mode. It can therefore be used for the latest surgical techniques such as CMP and MICS. Application: • Cataract surgery (cataracts) • Vitrectomy (vitreous surgery) • I/O flush-suction process • Diathermy (coagulation of tissues) • Light source for endo lighting Unchecked from a practice liquidation Auction-ID: A7-46327-3

Make: Wittmann Type: Linear Robot / Handling System Model: W711-0304 Year: 2005 Serial number: n/a Technical data: - Voltage: 200–230 V - Power: 1.2 kVA - Current: 5.3 A - Stroke X-axis: 620 mm - Stroke Y-axis: 1000 mm - Stroke Z-axis: 2000 mm Equipment: - Teach pendant (Wittmann TeachBox, Serie 6) - Linear axis system - Pneumatic gripper unit - Cable chain guidance - Vacuum / air hoses - Control unit with cabling Condition: Used Auction-ID: A7-45993-58

Type: High-Speed Micromotor System / Ultrasonic Generator Set Manufacturer: NSK Nakanishi Model: Z500 Components: - NSK Z500 control unit (brushless micromotor) - Handpiece / motor spindle - Foot control connection - Additional unit: Laptron 50 ultrasonic generator (visible) - Step-down transformer (external) Speed Range: up to 50,000 rpm (display shows x1000 min⁻¹) Display: Digital speed display Control: Rotary speed control + push buttons (FWD/REV, motor) Application: Precision grinding, polishing, deburring, mold finishing, fine machining Features: - Brushless high-performance motor - Forward / reverse operation - Foot pedal compatible - Compact benchtop unit Condition: Used Auction-ID: A7-45993-81

A mobile pump room with sprinkler system to NFPA standards, equipped with a powerful 6-cylinder turbocharged diesel engine and a displacement of 8.1 liters. This unit is complete with a sprinkler control panel, diesel pump and logbooks, 176 operating hours, Fuel: Diesel, Engine: 8.1 liters, 6-cylinder inline, Turbocharged diesel, Sprinkler system: Includes control panel and diesel pump, Logs: Included, Application: Meets NFPA standards for fire safety Auction-ID: A1-40137-51

Auer Box with spare parts for pneumatic gate valves (extraction system) Various cylinders, connectors, valves, hose and mechanical gate valve Auction-ID: A1-46501-3106

Auction-ID: A1-40137-206

Security set with 4 cameras and a recorder. network video recorder / 16 ports DWL-NVR16P 2x small IP camera DWL-BF01 1x Large Camera DWL-BM02, 1x Sphere Camera DWL-DVV03, 1x Small Sphere Camera DWL-DFV02 with Mounting Bracket Unused in box Auction-ID: A1-40418-417

Good condition Included in the set: • 3x Sennheiser DW Pro 2 (Duo Headset) • 2x Sennheiser SDW 60 (Duo Headset, DECT) • 4x original charging stations with control function (base stations) Auction-ID: A7-46327-94

License Plate: OG-02-DT (Dutch), the screening machine can be moved by a truck. This screening machine is complete with: diesel engines, supply and discharge belts, supply belt, dispensing belts on all sides. Lubo star screening machine from 1999, designed for mechanical separation of material flows based on size and shape. The machine is equipped with rotating star shafts that effectively separate fine fractions from coarser parts. Technical features: Year of construction: 1999 Type: Star Sieve (Star Separator) Sieve deck: equipped with multiple star axes Drive: electrically driven Applications: e.g. compost, green waste, biomass, light industrial waste Separation principle: fractionation by rotating stars with adjustable sieve size Capacity: depending on material and settings Maintenance: Performed periodically (PLEASE NOTE! this vehicle has a license plate registration, when you p ...

5x Geuder Megatron Modular Phacoemulsification System Opthalmology Unchecked from practice Closure Auction-ID: A7-46327-38

With content see pictures Auction-ID: A1-46501-3095

The repackaging system is used to unpack glass bottles from pallets containing full module boxes, repackage them into ‘open basket’ carrier boxes holding four bottles, and repack them into pin-partition crates with palettising. The system consists of the following individual machines: 1. Depalletising of full module crates / repalletising of empty module crates: Here, pallets containing full module crates are fed in and destacked, whilst empty crates are stacked and transported out. 2. Repackaging machine: Here, 20-unit module boxes are unpacked, 4-unit carrier cartons are unfolded and filled with bottles/packed. 3. Packing into pin-partition crates and palletising: Here, the 4-unit carrier cartons are packed into pin-partition crates, stacked onto pallets, and transported out of the system., Additional title: Repackaging of full pallets containing modular crates into pallets contain ...