ctp system heidelberg used for sale

Motor 22 KW

Without compressors and insulated panels, Belt width: 1850 mm, Belt length: 18300 mm, Product gap: 85 mm, Refrigerant: NH3, R717, ammonia, Cooling power: 224 kW, Evaporator: 3 pcs. Raffel, 2266 m², Power: 3 x 400V, 50Hz, 55kW, Dimensions: 19800 x 3580 x 3450 mm

Cleaning medium: perchloroethylene, treatment chamber dimensions: 690x740x277mm, basket holder dimensions: 400x620x410mm, max. loading weight: 80kg, basket speed: 2-4/min, usable volume tank 1/2: 270/160l, solvent capacity: 450l, compressed air connection: 6bar, control: Siemens SIMATIC OP17, length: 2550mm, width: 1900mm, height: 2500mm, weight: 3.2t, with documentation. An inspection on site is possible.

Dough scoop with riser belt also possible for tubing • Dough funnel suitable for approx. 200kg dough • Funnel made entirely of plastic • Top edge hopper approx. 2050mm; Safety light curtains on top of the hopper. Attention: the lifting tipper should be set to at least 2,100mm dump! • Star knife for portioning the dough into Plastic • Oiling of the star knives: incl. • Oil tank: 19 liter stainless steel pressure tank, suitable in order to possibly add funnel lubrication afterwards. supply. • Funnel lubrication can be retrofitted • Horizontal pick-up belt for the dough portions • The dough is divided between two parallel Conveyor belts handed over • Climbing angle of the conveyor belts approx. 70° • The upper band can be moved at a distance to the inlet and run. • The lower band merges into a horizontal piece of ribbon, which leads the dough  ...

Stacker - Belt width 900mm, - Separate frame, with sprinkling or Head machine connected by quick-release fastener - Mobile version - Setting stroke adjustable, suitable for 1 Trays 980 x 580 (occupancy: 10 x 6) ,2 proofing planks 45x65 (occupancy 3 x 5) or 1 tray 58x78 landscape (Beleguing 6x2 Doppelweck) - Detection of the dough pieces via light barrier - User-friendly control cabinet above the Attachment - User interface. Touch Screen - Incl. frame for paper support - Working direction: from left to right

Doppler and scattering station Task: Round-rolled pieces of dough should be doubled and then sprinkled Solution: The round-rolled pieces of dough are fed by a roller flattened and then run through a Immersion bath. After the immersion bath, the first piece tilted by 180°, the next one is tilted to the first Piece tipped on it. After that, the two pieces drive and are sprinkled from above. After sprinkling, another printing roller follows, which, on the one hand, attach the pieces of dough to each other and on the other hand, the sprinkling presses on the dough. Description: Flattening: Full-surface tape with above, height-adjustable roller. Roller driven. Humidification: Water bath with adjustable diving depth.

Manufacturer: Fraunhofer Model: HEIS Laser 1 Year of manufacture: 2023 Status: Fully operational CE certified: Yes Technical Specifications - Supply voltage: 3 x 400 VAC / 50 Hz - Fuse protection: 3 x 50 A - Rated current: 50 A - Laser wavelength: 9 to 12 micrometers - Laser average rated power: 450 W Hardware Components Included - Beckhoff control PC - Philips monitor - Laser source OEM 45 IX - Water-air cooler and cooling water system - Scanner IntelliSCAN 20 with VarioSCAN 40 - Beam guidance system - Air conditioning system - Cooling water system - Control panel Peripheral Equipment Included - ULT extraction and filter unit - Riedel Kooling chiller unit, Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Baublys Model: BL5000 G30 Sy / NC303030 Year of manufacture: 2020 Status: Fully operational CE certified: Yes Laser Specifications - Laser type: CO2 laser - Average laser power: 30 W - Laser class: 4 - Wavelength: 10.6 micrometers Technical Specifications - Operating voltage: 400 V / 50 Hz - Max. power consumption: 2.8 kVA - Fuse protection: 16 A - Connection: 5-pin CEE plug - Machine dimensions: 860 x 1,493 x 1,777 mm - Machine weight: approx. 465 kg Workpiece Capacity - Max. workpiece height: 300 mm - Working table size: 550 x 375 mm - Max. workpiece weight: 75 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

TECHNICAL DATA: 02 Motors: TX3 – 3 axles, equipped with HSK63E mount – chain magazine with 46 places TX5 – 5 axes (C ±270°, W ±120°), equipped with HSK63F mount – magazine with 24 slots Machinable workpiece length: max. 7000 mm Wood cross-section: max. 300 mm Machinable workpiece thickness: from 20 to 95 mm Loading buffer with 2 stations – simultaneous processing of 2 workpieces Videojet Laser Marking Liquid cooling for the spindles

Gericke PTA50 Pneumatic conveying system Stainless, Mobile pneumatic conveying and dosing system used in the food, chemical and pharma industries, working pressure 3.9Bar, volume 50L, with butterfly valve and actuator

Manufacturer: Carrier Model: 30HXC 200 Type: Industrial Screw Chiller Year of manufacture: 2001 Condition: Used TECHNICAL SPECIFICATIONS - Cooling capacity: 700 kW Find more here - .ucymachines/ Contact us at - sales@ucymachines

Rollable chip extraction for aluminium or PVC

A tool presetting device is offered. Axes: 2 (X/Z), position display: EPA 3001 2-axis LED display, tool holder: SK steep taper, projection measuring head with sighting device, pneumatic tool clamping, integrated compressed air maintenance unit including pressure gauge, fine adjustment via handwheels, zero point storage, measured value hold function. Weight: approx. 95kg, overall dimensions X/Y/Z: approx. 600mm/550mm/1100mm. Inspection possible by arrangement.

The shredding plant is equipped with two powerful bevel gear motors, delivering a combined total power of 60 kW (2 x 30 kW). The chamber length of the RedUnit XRL is 1600 mm, designed for extensive shredding tasks. With a speed of 42 min⁻¹, the machine operates efficiently and reliably., The power supply is 400 V AC at 50 Hz electrical frequency. The motors are of high quality and lacquered, meeting the latest standards (AGM4606.TF). The operating temperature range is from 0°C to +50°C, so the machine operates reliably under various climatic conditions., MODERN CONTROL AND AUTOMATION:, The crushing system features a fully automatic control with the PCU type SQF0050 and a Performance Control Unit (SQF0060). Operation is via a modern 10-inch touch panel that enables user-friendly operation and intuitive control. The system supports both automatic operation and manual hand operation.,  ...

Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m ...

Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026.

This 4-axis Arburg Multilift Select 15kg quer was manufactured in 2015. It features an impressive X-axis travel of 700 mm, Y-axis travel of 1200 mm, and Z-axis travel of 2000 mm. If you are looking to get high-quality work piece handling capabilities, consider the Arburg Multilift Select 15kg quer machine we have for sale. Contact us for further details.

Bread roll line König Mini Rex G2000 Year of Make: 2002 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SK63 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Bread roll line König Classic Rex Combiline 800 This system is currently still being repaired (pictures are from the bakery) Suitable for the production of round, oval and die-cut rolls as well as other stamped rolls Year of Make: 2008 Dough divider and rounder, type: Classic Rex T6 Proofer, Type: Combiline 800 Weight range: 45-100 g (stamp size: SK 61) Capacity: max. 9,000 pieces/h Pre-rolling for oval products before feeding into the proofer Proofer with air conditioning (temperature, humidity) side discharge belt for further production (e.g.: downstream

Bread Roll Line Combi WP Multimatic MUS Selecta Modular V60 Combi Year of Make: 2016 Condition: repaired, ready for immediate use Operating hours: 12,200 h Dough divider and rounder, type: Multimatic MUS 5-row 3/4/5-row, combined roll line for the production of shaped rolls and long rolls, sliced and uncut Working width: 600 mm Weight range: 35-85 g (piston diameter: 50 mm) Hourly output: 6000 pieces Fermentation time: 12 min Stamp unit for emperors, braids, pressed rolls, etc. Green operation without proofer with direct deduction possible (e.g. for Berliners) Performance

Brötchenanlage Lippelt Mini Rustica GS Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2003 Condition: tested & cleaned Stainless steel cover With guillotine and die-cutter Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Bread roll line König Mini Rex G2000 Year of Make: 2004 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SKG58 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

WP Kemper Softstar Evolution Compact Bread Roll Maker Year of Make: 2013 Suitable for the production of round, elongated, cut or punched dough pieces (e.g. Berliners, cut rolls, after-work rolls, etc.) Max. hourly output (6 rows): approx. 12,000 pieces Weight range approx. 45-95g 6-row head machine with pre-portioner Blockable rows for e.g. 4-row production (sliced rolls) Touch control with program memory Incl. chamber drum for various weight ranges Proofer with air conditioning Long rolling unit with motorized upper belt  Punching unit incl.

Bread roll line WP Multimatic MUSG-4 Dough dividing and casting machine, for the production of round dough pieces 4-row head machine Manufacturer: Werner & Pfleiderer Type: Multimatic MUS-G Year of Make: 2010 Condition: used, repaired Weight range: 50-150g Hourly output: 2600 to 8000 pieces Digital control, with adjustable hourly output, operating speed, weight adjustment (motorized) Depositing device, for automatic filling of the dough pieces on baking trays Manufacturer: WP Kemper Type: AB Condition: used, repaired Working width: approx. 60

Fortuna Magnus S6 Profiline K bread roll line  Fortuna Magnus S6 dough divider and rounder, year of manufacture: 2018 6-row head machine Weight range 50 g to 140 g Proofer with heater and humidifier, year of construction: 2012 Green operation possible without proofer Long rolling station Cutting unit Punch unit Seed station with humidification for one-sided seeding Setting machine for baking trays or placing on conveyor belt for further processing possible More information, pictures and videos will follow...

Bread roll line König Mini Rex Futura G2000 Year of manufacture: 2018 Compact system G2000-K2 with Mini Rex Futura head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex Futura, swing-out, up to max. 4,000 pieces/h Stamps for round and square rolls Stamp size: SKG63 and RK64 Weight range: 40-105 g Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Trima K2 bread roll line with compact proofer G2-3 Suitable for round, long-rolled, folded and flattened products, e.g.: hamburger, hot dog, mini baguette Dough divider and rounder K2 (YOC 2014) Digital adjustment of weight adjustment, effective room height adjustment, effective speed and effective time Dough hopper capacity 25 kg with feed belts Flour for dough hoppers, moulding chambers and spreader belts Manual pressing pressure adjustment for different types of dough Weight range: 25-95g / 50-150g With footswitch Touchscreen control with recipe memory Power: max. 3,200

Bread roll line König Mini Rex G2000 Year of Make: 2002 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SK63 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Brötchenanlage Lippelt Mini Rustica GS Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2009 Condition: tested & cleaned Stainless steel cover With guillotine and die-cutter Seeder station, type: Rumo 6 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2019 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Refrigerant: R404A, Compressor: Danfoss Optyma, Power: 3 x 400V, 50Hz, 3.9kW, Dimensions: 800 x 1200 x 1500 mm

König Artisan SFC bread roll line Year of manufacture: 2018 Condition: cleaned & tested Suitable for making ciabatta and square buns Hourly output: max. 300 kg dough Dough sheet height: min./ max. 12mm/ 32mm, dough dependent Dough belt width: 170 mm Dough Tape Flour for Top and Bottom Guillotine and punch for high product variety Touch panel with recipe management Poppy seed with water bath, type: MOC-C300 Incl. 3 cutting rollers for 1 to 4 rows of operation Incl. 1 punching tool of your choice, subject to availability

Bread roll line König Mini Rex G2000 Year of Make: 2005 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SKG58 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2019 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Refrigerant: NH3, R717, Compressor: GEA Grasso PR-P55S-28, Flow rate: 966 m3/h, Working pressure: max 21 Bar, Power: 3 x 380V, 60Hz, 162kW, Dimensions: 5000 x 2200 x 2450 mm, Weight: 5400 kg

König Artisan SFC bread roll line Year of Make: 2013 Condition: functional, bakery condition Suitable for making ciabatta and square buns Hourly output: max. 300 kg dough Dough sheet height: min./ max. 12mm/ 32mm, dough dependent Dough belt width: 170 mm Dough Tape Flour for Top and Bottom Guillotine and punch for high product variety Touch panel with recipe management Poppy seed with water bath, type: MOC-C300 Incl. 3 cutting rollers for 1 to 4 rows of operation Incl. 1 punching tool of your choice, subject to availability

Bread roll line König Eco Twin 800 Year of Make: 2008 Head Machine, Type: Classic Rex T6S Stamp size SK58: 30 to 80 g 800 mm version: 6-/5-row working method Max. hourly output (proofer): 5040 pieces Max. hourly output (head machine): 9000 pieces With direct deduction for production without proofer operation High product variety thanks to interchangeable plunging tools and cutting station Long-knit station For the production of the following products: round, round-stamped or long-rolled, long-rolled-cut or long-rolled-pressed Incl. 1x cutting station, 1x plunger tool of your choice, according to

Roll line WP Multimatic MUS Rollmeister SC 51 Year of Make: 2009 Suitable for sliced rolls, round rolls and long rolls Max. hourly output: approx. 5,100 pieces Weight range (without fermentation): 30-90g Weight range (cut bun): 40-65g Pre-proofer I (before long rolling): 6 min Pre-proofer II (after long roller until cutting): 6 min Multimatic MUS 4-row dough dividing and rounding machine Pressure roller on spreader belts after the head machine Long-knit station Pressure roller in front of cutting station, height-adjustable Cutting station Bypass for green operation without proofer Depositing device for

Bread roll line WP Kemper Quadro Filius Year of Make: 2012 Weight range: approx. 25 to 360 g 1 to 6 rows of operation (depending on the cutting rollers) TA up to 180 Output approx. 1,400 to 4,000 pcs/h Max. 320 kg dough/h Dimensions LxWxH: 271 x 75 x 180 cm Power requirement: 230 V Compressed air 6-8 bar Incl. 1x cutting roller (3-row), 1x punch

Belt width: 710 mm, Length: 16000 mm, Refrigerant: N2 (liquid nitrogen), Power: 3 x 400 x 50Hz, 8kW, Dimensions: 17600 x 1500 x 2300 mm

Bread roll line König Basic Rex II Combiline 600 Year of Make: 2008 Condition: Currently under maintenance, pictures before maintenance For the production of round, oval, punched, elongated and flat products from wheat dough, mixed Swiss dough, cereal or fine yeast dough Suitable for shaped buns, elongated buns, etc. Working width: 600 mm Max. hourly output: 7,500 pieces (5 rows) Max. hourly output: 4,500 pieces (3 rows, for elongated pasta) Weight range: 35-85 g Dough divider and rounder, type Basic Rex II, 5 rows Long knitting board in front of proofer Proofer with

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2022 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 36.HL22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible.

Bread roll line König Mini Rex G2000 Year of Make: 2008 Compact system G2000 with Mini Rex Futura head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SKG58 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Manufacturer: Bous Model: 4765/30 WT System Name: Trowamat Year of Manufacture: 2013 Usable Chamber Dimensions : 470 x 650 x 300 mm Maximum Load per Basket: 100 kg Maximum Workpiece Length: up to 550 mm Tank 1 pH Range: 7 to 11 Tank 1 Fill Volume: 500 L Tank 1 Temperature: 70 degrees C Tank 1 Heating Power: 18 kW Extraction: 0.18 kW / 108 mm diameter Drying Power: 11 kW Compressed Air: 6 bar Voltage / Frequency: 230/400 V / 50 Hz Control Voltage: 24 V DC Total Current Draw: 82 A at 400 V Special Equipment: Loading Station , Oil Separator Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Turbo Clean Type of Machine : Parts cleaning machine Model : T10-400 Year of manufacture: 2007 Machine Weight: 550 kg Maximum Fill Volume: 18 L Maximum Load Weight: 15 kg Installed Power: 7.0 kW Mains Voltage / Frequency: 3 x 400 V / 50 Hz Pneumatic Connection: 6 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

Belt width gross: 1060 mm, Belt width nett: 1015 mm, Tiers: 36 pcs., Product gap: 65 mm, Link height: 80 mm, Belt length: 738 m, Infeed height: 925 mm, Outfeed height: 4120 mm, Refrigerant: NH3/Ammonia, Cooling power: 640 kW, Evaporator: 4000 m2, Power: 3 x 400V, 50Hz, 92kW, Dimensions: 11020 x 8300 x 5100 mm

Key data: 50 m², 1160 kg, 3920 mm

Test mark H3 / DGUV HO 213001 Max. volume flow: 10,000 m³/h Nominal volume flow: 6,910 m³/h, 2,550 Pa Connection diameter: 350 mm Filter area: 50 m², dust class "M", AWN 16 cone Motor power: 2 x 5.5 kW Filter regeneration: pneumatic-mechanical Sound pressure level: 69 dB(A) Built according to EN 16770 Residual dust content less than 0.1 mg/m³ incl. control cabinet with 2 frequency converters incl. 2 forklift consoles

Pallet circulation system for the production of Twin-Wall Panels and Filigree Floor Slabs comprising: 56 pallets; length = 10.00 m, width = 3.00 m Longitudinal and transverse transport systems for the pallets Stacker crane for storing and retrieving the pallets Curing chamber with 50 storage spaces 1 tilting station at the demoulding station Stacking areas with transfer trolleys Transfer trolleys for horizontal and vertical precast elements Automatic concrete distributor (built in 2018) Turning device for the production of double walls Beckhoff control system 2 laser plotters, from Z-Laser Steel processing PROGRESS: Straightening and cutting system, Progress MSR2/16 with positioning device for the steel of a complete pallet – plotter by Z-Laser Lattice girder cutting system for wall girders Spare parts for electrical/control systems, spare parts for mechanical c ...

Compressor system consisting of 2 compressors + 2 air dryers professionally installed in two adjacent containers. 2 x Manufacturer: Kaeser Type BSD 83 Year of construction 2016 Operating hours approx. 14,950 hours Rated power 45 kW Operating overpressure 12.0 bar 2x air dryer Manufacturer: Mark Type MDX 15000 Conatiner Overseas 2 pieces standing next to each other Total dimensions approx.: Width 5m, Height 2.8m, Length 6m Weight estimated (total weight) 10to