ctp system heidelberg used for sale

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2700 liters Machine dimensions in cm: Length: 190 Width: 375 Height: 210 Electric power: 14 kW

Type of packing machine Height 1900 mm Width 1400 mm Length 2150 mm Power supply: 400V 50Hz 3N Total power 7.5 kW Main Material: Galvanized Steel Hunkeler Systeme AG Channel Press, Model:, HSM AK 12-600, Pressure: 16 tons, Power supply 380 V, 50 Hz, 7.5 kW, Overall dimensions: 2150 mm x 1400 mm x 1900 mm, 2900 mm x 1300 mm x 1850 mm, 1200 mm x 900 mm x 1200 mm 1600 mm x 400 mm x 350 mm.

Key data: 10000 mm, 3000 mm

Ram travel (W) 1,500 mm Taper ISO 50 P.D.B. R.P.M. 4,500 kW 33 Volts 400

Used homogenizer AK SYSTEMS, type: Hydro Grind laboratory system 50 liters For the production of liquid to medium-viscosity emulsions, dispersions or suspensions - Laboratory equipment with a capacity of 50 litres - All-in-one solution for food, cosmetics, chemicals and pharmaceuticals - Enables easy introduction of solids into liquids - Allows homogenization into a fine droplet structure - Vacuum container - With double jacket for heating or cooling (2 bar) - Maximum temperature in the container: 95°C -Vacuum pump - Connection: 400 V, 50 Hz, 3Ph, 8.0 kW - Weight: 120 kg (without control cabinet) - Condition: Good, ready to use Visits and test runs are possible by arrangement.

Pago Labeler System 202 Labelling of FS Soil PCE Camera System Printer Length: approx. 890 mm Height: approx. 715 mm Core diameter of label roll: 75 mm Max. outer diameter of the label roll: 300 mm Min. Label Length: 10mm Max label length: 999 mm

- Inserting machine - Speed: up to 4,000 cycles / hour - Automatic feeder DIN A4: 2 - Automatic feeder for inserts: 1 - Envelope formats: C6/5, C5 - Fold types: Single, wrap, Z and double fold

For sale is a used low-pressure cleaner, from the manufacturer System Cleaners. The LEDA 5 comes from a prototype plant and is only 50 operating hours. Year of Make: 2011 Type: LEDA 5 FF Max. temperature: 70°C l/min. max.: 120 Voltage: 3 x 400 V Frequency: 50 Hz Dimensions (L x W x H): 1700 x 800 x 540 mm Weight: 150kg Grundfos Vertical Pump: CRNE5-14 J-CA-GI-E-HQQE incl. installation and maintenance instructions Price excludes VAT, freely loaded from the Hesse-Germany location. Shipping to Arrangement and assumption of costs as well as delivery possible throughout Germany. Changes / errors in the technical data as well as prior sale reserved.

Key data: 3500 , 1212 , 70

Screw diameter; 70 mm Injectable volume / Shot volume: 1212 cm3 Injection pressure: 1877 bar Column passage / Bettween tie bar: 810 x 710 mm Mould tickness thickness: 380 mm max: 820 mm Opening stroke: 710 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options:

3D Systems Projet MJP 2500 3D Printer the printer is refurbished with a new print head. This is a 3D Systems MJP 2500 Plus printer. This was overhauled in December 2022. Among other things, a new print head was installed. Since the general overhaul, the printer has run about 100 hours. The unit works perfectly ProJet® MJP 2500 Plus 3D printer system: - Installation space: 294 x 211 x 144 mm in X, Y, Z axis. - Layer thickness: 0.032 mm - Resolution: 800 x 900 x 790 dpi (X-, Y-, Z-axis) - weight: approx. 211 kg - Power supply: 230 V, 16 A, 50 Hz - Data connection: Ethernet TCP-IP, USB port - CE certified Material options - VisiJet® M2 Armor M2G-CL construction material - clear, flexible, ABS-like (HD + UHD) - VisiJet® M2 ProFlex M2G-DUR build material - clear, flexible, polypropylene-like (HD + UHD) - VisiJet® M2R-GRY construction material - opaque, gray, rigid (HD + UH ...

Two (2) Surplus/Never used, Mobile Substations 25/30 MVA, 115/13.8 kV. 60 Hz. 3 Phase, with ODTF1/ODAF2 cooling, YNd1 Connection, Cooper Windings, on a low bed chassis trailer, HV Surge arrester, High Capacitive Voltage transformer, 145 kV Hybrid Switchgear, Outdoor Circuit Breaker Roof Bushing, Control and Protection Panel, Battery Charger, Batteries and all the auxiliary equipment for this substation.

2015 Laem System VIS100-800 1. General Characteristics The VIS Machine is designed to correct alignment errors and remove defective spans from finished reels of APET sheets. The machine is bidirectional, allowing the web to run through the machine in either direction: during the first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with the help of a splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed. The splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials. 2. Web materials to be handled - The doctoring machine can unwind, process and rewind APET/PE materials The thickness range to be considered is 50 � ...

Cleaning system, for ceramic flexo and ceramic flexo sleeves. Plastic media or sodium bicarbonate is sprayed at low pressure onto the the cylinder. This media is then recycled continuously about 8 times, depending granulometry. The machine consists of a cleaning and a cyclone/filtration filtration" section. Second-hand machine. Power supply: 230V 50/60Hz 3kW Compressed air: 5 bars Media consumption : 0.5kg/hour Find more here - / Contact us at -

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

1992 COMBINED CONCENTRATION SYSTEM Type: AFN 454 US The system was in operation for a maximum of 2 months per year. WITH AROMA RECOVERY, USED, REBUILT AND EXPANDED, IN ADDITION TO EQUIPPED WITH NEW COOLING TOWER CIRCUIT EVAPORATOR TYPE OPERATION Horizont TYPE HEAT EXCHANGE al, CONDENSATION AROMA 4-stage EXTRACTION with SYSTEM VERSION: WATER live steam EVAPORATION SYSTEM TYPE > NEW preheating, recovery, cooling mixed condensation semi-barometric rectification - tray column especially for the juice industry 4 840 Kg/h AFN 454 U-S Technical data: 1-stage dearomatization and concentration, combined operating mode SYSTEM TYPE: AFN 454 U-S PRODUCT: Apple juice, cloudy Input quantity 6 600kg/h Input dry matter 12,0% Input temperature 15 ·c Water evaporation 4 840 kg/h Initial quantity 1 760 kg/h Starting dry matter 45 % Starting temperature approx. 18 ·c Aroma  ...

2019 DN200-DN600 Hydraulic function test bench DN200-DN600 (built in 2019) shown below. The system is currently in use and is in perfect condition. Service description TP Pump (1) E-Motor: 315 kW Pump max. liter capacity: 41,833 l/min Pump min. liter capacity: 13,944 l/min Max. operating pressure 25 bar Nominal discharge head 28 meters NKG Pump (2) E-Motor: 315 kW Pump max. liter capacity: 16,833 l/min Pump min. liter capacity: 5,611 l/min Max. operating pressure 16 bar Nominal discharge head 80.7 meters Container Volume: 11400 liters Permissible pressure: - 0.5/10 bar Min pressure during operation: 1 bar Max. operating pressure: 5.5 bar Medium: Drinking water without additives Min. max. temperature -10/50°C Permissible load cycle 1000 The pumps are operated by means of a frequency converter. This enables speed control from 500 to 1500 rpm. The pumps can be switch ...

We are pleased to offer a high-performance Cold Knife Scoring System manufactured in 2014. This machine is ideal for precise cutting and scoring applications in various industrial sectors, including automotive manufacturing. Technical Details: - Dimensions (L x W x H): 3800 mm x 3200 mm x 2700 mm - Weight: 6000 kg - Table Size: Approximately 1500 mm x 700 mm - Number of Robots: 1 - Number of Workstations: 2 - Table Type: Fixed table Power and Control: - Operating Voltage: 3x400 V AC / N / PE - Control Voltage: 24 V DC - Frequency: 50 Hz - Total Power Consumption: 15 VA - Rated Current: 63 A - Pneumatic Pressure: 6 bar

AFS Corona Pre-Treatment system Type (Typ): G 60 M Input (Eingang): - Voltage (V): 400 - Current (A): 16 - Frequency (Hz): 50/60 Output (Ausgang): - Power (W): 6000 Technical Data Roller Width: 2700 mm Electrode Width: 2500 mm Maximum Mechanical Speed: 250 m/min Maximum Generator Power: 6 kW / 1 & 5 Core Operation Electrode Type: Ceramic Electrodes Discharge Roller: Ceramic Roller Drive Type: Driven Discharge Roller Cooling Type: Water-cooled Pre-treatment Direction: Controllable via web path Pressure Rollers: Present on both sides Find more here - / Contact us at -

Technical Data - Year of Manufacture: 08/2019 - Dimensions (LxWxH): 35x4x5 m - Total Weight: Drying approx. 7 tons, Washing approx. 9 tons - Throughput: approx. 700 kg/h aluminum shavings, approx. 1400 kg/h alloy shavings - Energy Source (Drying): Gas - Energy Source (Washing): Gas - Gas Consumption: approx. 44 m³/h - Electricity Consumption: approx. 37 kWh/h - Dimensions (LxWxH): 35x4x5 m - Electrical Data: - Nominal Voltage: 400 V - Network Frequency: 50 Hz - Control Voltage: 24 V Find more here - / Contact us at -

Model: VXC Nitro 2450 Typ 523 Year of Manufacture: January 2014 Voltage: 3 x 230/400V, 50 Hz Power Consumption: 45 kW Nitrogen Consumption: 25 m³/h Exhaust Capacity: 2 x 200 m³/h Manufacturer: Rehm Thermal Systems Find more here - / Contact us at -

1) Twin Vitacount 12-2 The Vitacount 12-1 is the lower cost solution designed for vitamin applications, yet it combines proven product feed technology with electronic controls and infrared count heads as used on the higher specification machines. The 12-1 features 12 product feed tracks. The Vitacount features an integrated chip and dust extraction system. A touch screen control panel allows easy access to machine and product parameters, giving the operator good visibility of the complete filling process. The product library can store up to 1000 different set-ups and offers instant recall of both product and machine parameters. Vitacount is height adjustable by means of the manually adjusted telescopic funnel arrangement to allow differing heights of bottle to be filled and the system offers maximum versatility as product feed system requires no change parts and is capable of packagin ...

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - / Contact us at -

Aircooled chiller/Heat pump SYSTEMAIR AQR290-H050.PROTO 46/54kW Cooling capacity: 46 kW / 13 tons (12/7 — 35°C) Heating capacity: 54kW / 15,3 tons (40/45 —7°C) Year of manufacture: 2023 Options; Heat pump Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Type of refrigerant: R290 Number of fans: 1 pcs. Dimensions: 2.25x1.1x1.75 m Weight: 507 kg Working hours: 0/0 h. Condition: outlet: new

Jaw Crusher System for Sale Manufacturer: 3-B-Systeme Year of Manufacture: 1992 Operating Hours: 2,144 h The system consists of the following components: - . (Pos.1) 1 piece Müller jaw crusher, Rottweil, 800x500 mm inlet opening .Jaws approx. 70-80%, upper part new. - (Pos.2) 1 piece of steel construction from 3-B-Systems with pre-screening and bunker attachment - (Pos.3) 1 piece crushed material discharge belt - (Pos.4) 1 piece overband magnet - ( Pos.5) 1 piece 200 kVa power generator, soundproofed Find more here - / Contact us at -

Machine Type: Electrode Inverter Welding Rectifier Make EP-Systems Type Cycle 60.16 Connection voltage 230/400 V Adjustment range 1 – 160 amps Duty cycle 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter through built-in fan Portable assembly system design Fuse 26 Ampere Dimensions L x W x H 420 x 190 x 300 mm Weight 8 kg Age 10 years Condition workshop-tested new incl. UVV test report Scope of supply welding system with the following accessories: 1 piece ground cable 16 sqmm, 4 mr. long 1 piece electrode cable 16 sqmm, 4 mtr. long 1 piece of hand shield 1 piece facing glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 1 piece mains plug 230 V, soli ...

Comprises of 300 litre and 500 litre vessels with independent control panels, a tote bin hoist and a transfer pump. Machinery in nice ex factory condition and being removed from the factory in Europe at the end of January 2025.

Machine Description - Machine Type: 6-Axis Robot - Manufacturer: Martin Systems - Model: RoboCube Maxi - Type: MRC 242499-10 - Fanuc M-20iA - Year of Manufacture: 2019 - Payload: 20 kg - Maximum Reach: 1811 mm - Repeatability: 0.08 mm - Weight: Approx. 250 kg - Dimensions: L 2900 x W 1600 x H 2100 mm --------------------------------------------------------------- Condition of Use - Condition: - Like new, well-maintained, fully functional Find more here - / Contact us at -

We are offering for sale a Chamber belt system with shrink tank. LikeNEW! Barey used CHAMBER BELT VACUUM MACHINE Model: Conveyor Pro 1065 Packable Products - Meat - Sausages - Cheese - Fish - Fruits - Vegetables - Ready meals - Mechanical components - Electronic components Technical Data - Structure: Stainless Steel AISI 304 - Control Panel: 7" PLC Touchscreen - Dimensions (L×W×H): 2741×1237×1645 mm - Weight: 900 kg - Inner Vacuum Chamber Size: 1110×840 mm - Usable Lid Height: 250 mm (Optional: 150-200-320 mm) - Sealing Bars: 1 or 2 × 1000 mm - Distance Between Sealing Bars: 670 mm - Sealing Type: Monoseal or bi-active, double seal or wide sealing - Conveyor Belt Speed: Variable, up to 40 m/min - Vacuum Pump: 1 or 2 × 300 m³/h (7.5-15 KW) + Booster 500 or 1000 m³/h (5.5 KW) - Final Vacuum Degree: 1 mbar absolute - Power Supply: 400V - 3PH + N + PE - 50Hz - 3KW (without pum ...

Bottle Leak Detection System – WILCO Wilcomat R18 SQ/FS High-performance bottle leak detection system designed for quality control in beverage and liquid packaging lines. The WILCO Wilcomat R18 SQ/FS ensures reliable inspection of bottles to detect leaks and maintain product integrity during high-speed production. General Information - Manufacturer: WILCO - Model: Wilcomat R18 SQ/FS - Year of Manufacture: 2006 Technical Specifications - Production Capacity: 35,000 bottles per hour Application - The system is designed for automatic leak detection of bottles in high-speed packaging lines, ensuring that only properly sealed containers continue through the production process. Typical applications include: - Bottled water - Soft drinks - Dairy beverages - Juices and other liquid products Key Advantages - Reliable WILCO leak detection technology - Suitable for hi ...

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - /

SNA-22. Hydraulic System Built: 1992, Type SB330-55 A4/24; Complete system (Motor, Pump, Control) Manufacturer: Cameron system with 600 l oil tank Technical Data: - 230-320 bar - Test pressure: 330 bar - Includes 7 nitrogen bottles, Volume: 50 l each - Pressure: 200 bar, prefilled at 120 bar - 2 pumps, 25 l/min Find more here - / Contact us at -

The robust single-shaft shredder is equipped with 7 offset 40/40 mm indexable blades on the rotor The extremely robust design allows the shredding of data carriers such as hard drives, etc., files with metal components, wood-metal mixed material, metal-plastic material, recycling material, textile and carpet, rubber waste, horse manure, etc., sheep's wool, compost, etc. Technical data: 1 rotor with 7 offset indexable blades 40/40 mm 1 profiled counter blade 1 interchangeable screen perforation 20 mm round (can be adapted as required) Feed width 366 mm Rotor diameter 330 mm Motor 7.5 kW, 3x380 V, 50 Hz (can be made stronger) Speed approx. 580 rpm (a gearbox can be set up for low speeds) Machine new Information from Peter Ari Schär from MATEC Changes, errors, prior sale reserved ! Manufacturer: MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse ...

Sinel Systems Type A tube labeling machine suitable for conical products with a diameter of 16 - 40 mm and a length of 152.5 - 173.5 mm, label width 15 - 160 mm, label length 10 - 400 mm, with infeed roller conveyor for manual feeding of the tubes, label dispenser HERMA Type H400 R IDEA, label roll core diameter 76mm, label roll outer diameter max. 300mm, label dispensing speed 3 - 20 m/min., product presence control and stopper color control, Omron HMI operator control panel, Siemens S-7-1200 PLC, electrical connection 220V/ 500W, machine floor space 1650 x 780 mm (L x W), machine height approx. 1980 mm, Machine nett weight aprox. 210kg.

This material filler is equipped with a 1 kW electric motor. It can suck 2 kinds of materials into its large tank. The mounted controller can also regulate the ratio of materials. There are several of them. Other fillers, dyes and other machines are also for sale. Please see my other ads.

description: For printing of labels, bottles, packaging etc: prints only in black colors, incl. frame Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

1200 litre process vessel Manufacturer Prai HiPurity Systems Ltd. Type IMV – 1200 W, H – 14471 unused Year of construction 2015 electro-polished Double-jacket, pressure-resistant Product room 3 bar Double jacket 4 bar Operating temperature 165° C Magnetic agitator on the underbody, Fabr. Merck Millipur Type GMP Drive 2000 Extensive documentation available, including qualification documents

Description volumetric doser production: 0.06 - 0.84 Kg/h (mounts 8 x 8 mm auger) hopper capacity: 15 dm3 lateral - 25 dm3 central

Description bi-injection press with satellite

System Components: Main Control Cabinet - Voltage: 3 × 400 V ±10% - Frequency: 50 Hz - Rated Power: 34.2 kVA - Current: 49.4 A - Fuse: 80 A (gG) - Protection: IP 54 - Type: RCE - Weight: 500 kg - Year: 2020 - Standards: EN 60204-1, EN 61439-1/2 Positioner / Workpiece Manipulator - Type: RPT_05000AR6D PL - Weight: 1800 daN - Year: 2020 - Enables PA/1G optimal positioning - Rotational Axes: 7 - Repeatability: ≤ 0.15 mm Dust Extraction Unit - Model: Dustec 4 XL - Power: 5.5 kW - Voltage: 400 V / N / PE - Air Supply: 6 Bar - Filter Class: M - Year: 09.2020 Welding Technology - Process: MAG (1-wire) - Wires Supported: Solid and flux-cored (Ø 1.0–1.6 mm) - Arc Modes: Short, spray, pulse, long - Power Source: Fronius TPS 600i - Process Optimization: Task-specific Robot & Sensor Periphery - Automatic torch changer - TCP calibration - Internal variable access for diagnostics - On ...

For Sale: Complete Drum System for Zinc Electroplating Year of Manufacture: 2000 This complete setup includes all essential components for efficient operation: - Drum Line with 5 TW - Centrifuge with TULZ from WMV - ROSS Cooling System - Drum Dryer Find more here - / Contact us at -

Description Process resistances: 1.5 Kw Regeneration resistances: 1.5 Kw Temperature range: 70 - 140 °C Air flow: 30 - 70 m3/h Hopper capacity: 150 Dm3 Dew point: -25 - 50 °C Approximate aspirator capacity: 10 Dm3 DEHUMIDIFIER WITH DEHUMIDIFICATION ROTOR AND HOPPER WITH LOAD CELL.

A used PICK and FEED system from Hundegger, built in mid-2019, very good maintained condition. Available summer 2026, sale as viewed from the FRG location. The system can be demonstrated by appointment. Sale without dismantling by Hundegger.

We are offering a complete Water-Cooled Induction Leveling System, composed of the following components: 1. Electrical Power Unit - Power Supply: 3 x 400V, 50/60 Hz - Current (In): 50 A - Short-Circuit Current (Icc): 35 kA - Item: 01 - Type: IFC/A-25 (25 kW / 20 kHz) - Year: 2023 2. Inductor Unit - Manufacturer: ATE - Drawing: 239003100_0 - Item: 03 - Year: 2023 - Type: INDUKTOR RECHTS (Right Inductor) 3. Chiller Unit - Manufacturer: M.T.A - Model: TAEevo TECH 051 - Production Year: 2023 - Voltage: 400V / 3Ph / 50 Hz - Power Consumption: 8.8 kW - Current: 10 A - Protection Class: IP54 - Refrigerant: R410A - Charge: 2.088 kg - Global Warming Potential (GWP): 2088 - Cooling Capacity: 32.0 kW (EWT 20°C, LWT 15°C) - Water Flow Rate: 5.5 m³/h - Water Connections: 1 1/4" - Weight: 239 kg Find more here - / Contact us at -

Flake Ice Machine Make: Ice Systems Model: F2 AS 2 TON Flake Ice Machine Built 2018 IN cabinet, with stand

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

x-travel: 1800 mm y-travel: 800 mm z-travel: 1000 mm total power requirement: - kW weight of the machine ca.: 3000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including: Injector Hopper Pipe connection diam. 160 mm. Bends Clamps Cyclone Customized to your project

ProJet 3600W Max for sale in good condition. Printing time approx. 10500h, printed build material less than 50KG, printed support material approx. 110KG., Installation: 03/2017, print modes: HD - high definition, Commissioning: 03/2017, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm), resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: 375 x 450 x 790 DPI; 32 μ layers 750 x 750 x 1300 DPI; 20 μ layers 750 x 750 x 1600 DPI; 16 μ layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Printing modes: UHD - Ultra High Definition, Support material support material: VisiJet S400 VisiJet S400, ...

For sale is a ProJet 2500Plus from 2017. The device is in perfect condition, test printing is possible (for an expense allowance, which will be offset against purchase)., Accessories: EasyClean System from 3D Systems, second build platform, Technology: MultiJet Printing