ctp system heidelberg used for sale

For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.

Process chiller / chiller air-cooled, Type: TAEevo Tech 251 P5 MTA S.p.A. TAEevo Tech 251P5 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P5 high-pressure circulation pump. Cooling capacity kW 48.7 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 8.26 Available pump pressure (bar) 4.93 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 29 Max. current (A) 50 Starting Current Circuit (A) 149 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 1034 Connection Rp 2 " Serial No.: 2200384598 Year of construction 2022 Condition: Optical 2, Technically ok Used Price: on request in Eur ...

Equipment: Code reading system HHS Xtend² for color codes consisting of: • Control unit X-tend² with code reader • Encoder with bracket • Touch screen screen • Folding switch with reading head CT10 • Bobst turntable ejector • Cable set complete for Bobst folding carton gluers

HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Position 8: CRANE

Broma Milk Roll Pusher Milchweck / dough piece pusher for manual assignment / one-man operation Pressure setting adjustable long discharge belt Tabletop unit DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty

Turntable for seeds Fortuna DT Stainless steel Shelf below for seed plates Wired mobile Connection 400V, 1 kW, 16A-CEE plug Used machine cleaned 6 months warranty Visit our large Bakery Machinery Center!

Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC

Hot melt adhesive application system Adhesive Application, Hot Melt Glue Gun Make HBB Heinrich Bühnen GmbH Type WCH 1146 CE Serial No. 46-1007-04 PROline tank system Year of construction approx. 2004 Maximum power consumption approx. 1860 watts Electricity connection 230 V Current consumption 8 A Protection class IP 32 Electronic temperature controller grado 905 Operating temperature 135 – 230°C Heating capacity tank 1200 watts Melting capacity 4.5 kg/h Warm-up time approx. 20 minutes Hot melt adhesives as granules or block goods Usable tank volume 4.5 liters With heated hose type HP With hot melt adhesive hand applicator With instruction manual

Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request

FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...

Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.

Oil mist separator, extraction system, oil mist extraction, suction Brand ANAG Dimensions: wxlxh 55x68x50cm 230V, 50 Hz Quantity: 2 The price is net and is valid for 1 piece.

Process cooler, chiller, chiller - air-cooled, Manufacturer: MTA S.p.A. Type: TAEevo Tech 902 P3 – 178 kW TAEevo Tech 902 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 90 Max. current (A) 160 Starting Current Circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Ye ...

Ref.-No. 00736 Name of the system extraction system + classifier Manufacturer sybrandy Model PF 4 L Spez Year of construction 07 - 2014 Kw 3KW Capacity 3.400m3/h Cartridge SYB325-1200 Operating hours 22 h

Specifications: • RKT refrigeration dryer for the treatment of compressed air • 10 bar operating pressure • 4 kW • 400 V • 570 l/min effective delivery rate • ECN pressure vessel 270 l powder-coated • Duplex filter set WBF 63 MFO/CA consisting of Microfilters and activated carbon filters incl. automatic float trap (for paint booth) • Oil-water separation system KON-C2 incl. inlet and outlet fittings • 2 fully automatic tank drainage valves KN 1.230 Year of Make: 2025 Price: We ask for your binding offer. Available from: immediately Terms of delivery: ex location – EXW Berlin Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

SAA 3001/3003 Suction sturdy construction made of solid sheet steel lower static charge compared to plastic constructions Easy to drive thanks to swivel castors Air capacity 3910m³/h Diameter on the device: 150mm Diameter at distributor: 3x 100mm 50Hz 2200W Weight 59kg G&STÜ-5922301 230 volts G&STÜ-5922303 400 volts

Bitzer shock freezer, freezer unit with evaporator and switch box

split chiller, chiller - water-cooled, Type: OCEAN Tech OCTME 230 – 66 kW Manufacturer: MTA S.p.A. OCEAN Tech OCTME 230 are water-cooled chillers for indoor installation in split version (without condenser) without hydraulic circuit (pump, accumulator) incl. crank tray heating, phase monitoring. Cooling capacity kW 66.2 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 11.4 Condensing temperature: 45°C Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 27 Max. current (A) 45 Starting Current Circuit (A) 178 Protection class: IP22 Dimensions: Length mm 1735, width mm 660, height mm 1200 Weight kg 383 Connection cold water G 2" B Refrigerant connection Ø mm: 22 / 28 ODF Serial No.: 2200388958 Year of construction 2022 Condition: Optical 1 , Technically ok (Stock unit, as good as new) Pri ...

ASA 4303 Aspirator Nominal volume flow: 4300m³/h Filter area 2x 2.4 m² Chip collection volume 2x 215l Suction nozzle outlet: 2x 100mm, 2x 120mm Input power 3,8kW Motor 400V 50Hz LxWxH 1700 x 600 x 2400mm Weight 69kg G&STÜ-5128433

-Release agent spraying system for bread baking tins -Grease baking tins -Grease box moulds

Length measuring system L-40NC suitable for Kaltenbach circular saw KKS 450 (please request KKS 450 separately) Directly from the customer used from CH-Oberrohrdorf available.

Amico Uniflair SDC0200B precision air conditioner Model No.: SDC0200B Coolant Type Water Fan/s: Vent. with forward-drawn Shovel Power Voltage Device: 230V/1ph/50Hz SERVICE CONDITIONS Drying Ball Temperature 24.0 °C Wet bulb temperature 17.1 °C Relative humidity 50 % Altitude a.s.l. 0 m Air back pressure 20 Pa Entry Temp. d.Coolant 7.0 °C Outlet temp. d. Coolant 12.0 °C Glycol content 0 % Freezing temperature 0.0 °C Coolant flow rate 1237 l/h Coolant flow rate 0.34 l/s SERVICES AND FEATURES Total cooling capacity 7.2 kW Sensitive cooling capacity 6.4 kW Total net cooling capacity 6.7 kW Net sensitive cooling capacity 5.9 kW SHR 89.0 % EER ( Cooling Capacity / System Power Consumption 13.9 kW/kW Air flow rate of air conditioner (dry) 1600 m³/h Air flow rate of air conditioner (dry) 0.44 m³/s Air temperature outlet/unit outlet 12.9 °C Relative humid ...

Ventilation system Howatherm , 16.000 m3/h, with speed control via Feqwenzumrichter Danfoss, filter, heat exchanger cold/warm, Silencer, control box, etc. Used for laboratory purposes only. Very good condition, as good as new. Price on request.

Diesel tank - Heating oil tank - Tank system - Steel tank brand new - with 30,000 litres capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 9010 white. (Other RAL colours are also possible on request!) L = approx. 10.00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - General: You will receive a V ...

- for the production of sliced rolls, smooth rounds, long rolled rolls and double pieces Year of construction: 2007 Weight range: 30-85 g Hourly output: max. 3,000 pieces 4-row system with 600 mm working width Integrated dough divider and drum transformer, Multimatic Pre-fermentation time 12 min (6 min before long roll station and 6 min between long roller and cutting station)Hanger drying Variable depositing device for digestate carriers of 3 Euro sizes: 400x600 / 580x780 / 580x980 mm UV Disinfection StationSiemens Touch Screen Control External dimensions (LxWxH): 3000x1250x2550 mm

Used head machine KÖNIG, Type: Mini Rex Futura -Overhauled- - Head machine / dough divider: KÖNIG Mini Rex Futura TR/G-FS - Warp knitting roller: SKG54 and AKG70 (20 - 135g) - 2 rows - new tapes - new Teflon - Wear parts renewed (completion 15 January 2023) - 6 months warranty - Condition: Very good, ready for immediate use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.

IZAN MAKINA IZFORM IZ5 roll forming line was built in 2019 in Turkey by İzan Makina – İmalat İnşaat İç ve Dış Ticaret Limited Şirketi. This line, distinguished by the use of the state-of-the-art technology available on the market, is designed for frame constructions. Its extensive machining capabilities allow for the precise, fully automatic forming of C- and U-type cold-formed profiles of various dimensions. These elements are used, among others, in partition walls and bathroom modules. The IZAN MAKINA IZFORM IZ5 profiling machine is offered with extensive equipment, including advanced BIM software and a sheet metal decoiler with a maximum capacity of 3 tonnes. The IZAN MAKINA IZ5 rool forming machine is currently configured for the production of C75x1.2mm and C100x1.2mm profiles. The production cycle is performed by means of a reliable tool head with the following machini ...

ELECTROMASHSTAN EMC-SP/3/05 Sigma roll forming line was built in 2019 in Ukraine by ElectroMashStan. The line is designed for the production of precision Sigma-type cold-formed profiles, which are used in among others steel structures, load-bearing elements and supports. The production cycle is fully automatic, thanks to the use of an automatic sheet decoiler. The strip with a maximum thickness of 3 mm is uncoiled towards the workspace, where it is formed using rollers. The ELECTROMASHSTAN roll forming line offered is fully complete. Applications for Sigma profiles: – steel constructions (halls, warehouses, industrial buildings) – prefabricated buildings and light steel construction systems – load-bearing elements (girders, columns, beams) – brackets, bracing and structural frames – wherever a high load-carrying capacity is required in a relatively lightweight construct ...

Heating oil Tank system Diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled incl. officially recognized test certificate. Tank environmental protection Wozniack . Specialist company according to § 19 Water Resources Act (WHG) offers as follows. Storage tank 50,000 litres double-walled new according to EN 12285-2 standard . The tank is new and will be equipped with the following fittings: 1 optical leak detector with type approval and leakage fluid(new) 1 filling tube with TW closure (filling cap) and dip tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII)(new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9.000 kg Of course, you can also design your tank s ...

Leybold Optics H3200 it is a horizontal inline sputtering system H3200 for the separation of Cu - In-Ga layers, glass substrates, which are coated from above, run continuously in this, it is a universal system for glass coating / architectural glass coating with 3 large process chambers and 8 infeed and discharge modules 3 modules of 650 mm run side by side in the process   the plant is as good as unused, (it did not come to production, only sporadic attempts), is already dismantled and stored in the north of Brandenburg Year of construction 2009 , plant number 070817 Type H3200 Original price of the inline sputtering system (2009): 5.600.000,- € the sales price is net plus VAT incl. loading and transport for Germany Dimensions : 24,335 m x 4,30 m Weight: approx. 120 t the three process chambers are special transports incl. all parts and document ...

Technical parameters Laser power 1000 W Laser source type optical fibre Source manufacturer MAX Photonics Length of laser waves 1064 nm Weldidng speed 0-120 mm/s Input current 230V 50Hz Kit includes: - Automatic wire feeder -Cooler 24 month warranty You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. B8a32e7mlf Laser welder LWH-1000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - Automatic Wire Feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 H ...

Description 3,000 litre tank of RT water 04-B-100 4.000 liter tank acid 03-B-100 4,000 litre tank lye 02-B-100 2,000 litre tank of fresh water 01-B-100 2 x Soaking tank 27 m3 Material: 1.4301 Weight: approx. 2000 kg Service conditions: Inner container druchkos, 20°C when cleaning 85°C Execution: Surface inside bright rolled III c Surface outside of polished III c Seams sanded inside Ra < 0.8 μm, except fillet welds Seams stained and brushed on the outside N11 1 Piece DN 200 DIN 11850 Spout N10 1 piece DN 65 drainage nozzle with strainer N9 N8 N7 Company Sign N6 1 piece DN 25 DIN 11850 Cable conduit (ends flared) N5 1 piece DN 50 DIN 11850 inlet N4 1 piece DN 500 manhole with limit switch Schmersal N3 2 pieces level sleeve N2 1 piece DN 25/65 CIP removable N1 1 piece DN 250 Vent with vapour drain 2 x hot water tank 15 m3 Material: 1.43 ...

Fully automatic storage system for containers – in excellent condition: Knapp Shuttle System OSR35 - installed 2016 Available from 2023, incl. 200 meters of conveyor technology, flow racks, Nerak lifts, picking stations Capacity: 7,000 containers 60x40x17cm, expandable up to 9,450 pieces. This OSR shuttle system from Knapp Fördertechnik could increase your performance enormously and reduce costs Performance: More than 500 picks/hour possible General information: The system has 2 aisles with a length of 23.5 meters (shelf length) for over 7,000 containers.An expansion up to 9,420 containers is possible. Additional information: Dimensions of the shuttle construction: Length: 32 m Dimensions of the shelf Length: 23.5 m Width: 7.5 m Height: 9.4 m Sizes of containers: Blue containers for picked goods: 60×40x35cm Green containers for storage: 60x40x ...

You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. Laser welder LWH-2000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual pla ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 30 H, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...

FRAMECAD F300i roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is the perfect choice for the efficient production of lightweight steel structures. This is because the FRAMECAD F300i enables the precise forming of C- and U-type cold-formed profiles of various dimensions (89 mm as standard), which are used in, among others, partition walls and bathroom modules. The machining process is fully automatic. The strip with a maximum thickness of 1.2 mm is uncoiled from the coil towards the workspace with a special roll forming system. Each profile is precisely formed, cut, punched, and marked, making them ready for direct assembly with screws. The FRAMECAD F300i roll forming machine is controlled via a touch panel with an intuitive interface. The full integration of advanced design software with the controller  ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...

FRAMECAD TF550 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact TF series (Truss and Frame) production line is an excellent choice for the mass production of fabricated solutions for the residential and commercial buildings. This is because the FRAMECAD TF550 enables the production of C- and U-type cold-formed profiles in various sizes (150 mm as standard), used as rafters, trusses and steel structures in a wide range of building projects. The entire production cycle is fully automatic. The strip, with a maximum thickness of 1.6 mm, is uncoiled from the coil towards the workspace, where it is machined by means of a special roll forming system. The profiles are accurately formed, cut, punched, dimpled and marked, making them ready for simple assembly with screws. The machine is operated via a touchscreen panel with an in ...

Liebert Emerson M31UA Cooling System Perimeter Cooling for Data Center Environments Cooling capacity: 31 kW Air distribution: Downflow Version: air-cooled Datasheet under this link Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Zum Verkauf bieten wir Ihnen die GULLIVER Brotlinie an. Baujahr 2009. Sprechen Sie uns gerne an.

FRAMECAD FL650 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is used in the production of precision C- and U-type cold-formed profiles, used as steel floor joists in a wide range of construction projects. The entire machining process is fully automatic and is performed with the highest accuracy. The strip, with a maximum thickness of 1.95 mm, is uncoiled from the coil towards the workspace with a roll forming system. Each profile is precisely formed, cut, punched and individually marked. Large service holes are also made to facilitate the assembly of electrical, HVAC and plumbing systems. The FRAMECAD roll forming line is operated via a touchscreen panel with an intuitive interface that significantly simplifies the daily work of the operator. The full integration of advanced design software with the cont ...

Rotativa 600 Accessories: 4 different forming rollers Easy to use: - Pour sugar dough into funnel - The discharge belt is automatically moistened - Adjust the rolling of the discard belt so that biscuits come off - Automatic settling on baking trays Dimensions: Machine width: 1400 mm Length of the machine: 3000 mm Machine height: 1700 mm Leaf tray: Max. 580 x 780 mm Connection: 380 Volt, 3 Kw Condition: very good, was only 2 years in operation (lack of production) All service work carried out, incl. new settling belt

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer  ...

Gebrauchte Scheurer Walzenlinie.

Integrated system with 3 Bitzer compressors 4PES-10Y-40P and switch box TK compound or normal cooling compound system. Price on request.

Hauser compound system with 3 Bitzer compressors and switch box 2x 4NES-12.2Y, 1x 4NES-14 F3Y (with frequency converter)

Compound system TEKO TPX2-4EES-4Y with Bitzer compressor 2 pcs. 4EES-4Y and switch box Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Lift system, Megamat FSE 7.1, approx. 6.91m high, min. 331kg / Shelf, Shelf: approx. 3.06m x 81cm – used - : Price ex location: 18.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Type: FSE 7.1 3060/816-6910 Device number: 500002536 Year of Make: 2008 Permissible total load capacity: 70,000kg Load capacity per tray: at least 331kg (possibly also 414kg or 536kg, depending on which type of tray is installed, unfortunately cannot be clarified in advance). Number of shelves: approx. 50 pieces Shelf size: 3060 x 816mm Device dimensions: Width: approx. must be submitted later (width should be approx. 3,450mm) Depth: approx. must be submitted later (depth should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, nominal operating current 17.8A, fuse supply line: 25A Condition: good Available: from approx. End o ...