ct 60 used for sale

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

Used Used Caps Elevator CTECH Screw Caps: Year: 2008 Condition: As Is Used Caps Elevator CTECH Screw Caps Year: 2008 Speed: 5.000 Bph Type of cap: Screw caps Type: Pneumatic Code: I 72 More details: https://bottlingscout.com

General SKU035B246 MakeCosmit/CTI Monza No.0151 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume12465 Ltr. Motor90 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity12.465 Ltr. Vessel sizesDia. 2200 x 2400 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connections(10x) OutletDia. 100 mm Half coil jacketed460 Ltr. Max. temperature150°C With gate type stirrerequipped with scrapers (motor 30kW: 9 rpm Ex) With paddle stirrer/screw ribbon stirrer type DM-1250/300 (40 rpm) Motor90,0 kW (400 V, 1460 rpm) With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4301 (304) General LocationBarneveld Floorspace2,8 x 2,8 m Total height7,0 m Weight7500 kg ATEX designedcheckAgrochemicalsPlastic  ...

CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Regulation: - 32 bit controller - LCD control panel - Digital display of target and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test object control Technical performance data Temperature checks: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K temporally Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat irradiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, a ...

REF-2305-2306-2307 PEACH STONING AND HALVING MACHINE FOODTECH 320 APA Stoning and halving machine for peaches. Manufacturer: CTI FoodTech Model: 320 APA Year: 2014 Automatic continuous orientation system. Stoning system with rotation of the blades driven by a high-revving motor. Automatic lubrication system. Output: up to 320 pieces/min (approx. 3,000 kg/h) Installed power: 3 kW/4 HP Infeed height: 1,200-1,070 mm Outfeed height: 490-590 mm Overall dimensions: length 5,238-5.763 mm; width 1,810 mm; height 1,930 mm Net weight: 2,100-2,300kg Water consumption (40 psi): 35 l/min

General SKU354T960 MakeClima Temperatur Systeme LocationBarneveld CEcheck TypeC+10/350/S Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate box:Temperature Test Chambers: Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel General No.007147 Year of construction2001 Floorspace0,85x1,7 m Total height1,9 m Weight400 kg Extra SpecificationsTemp. bereik: 10-90 °CVochtigheidsbereik: 10-95%rFDauwpunt vereist 1: 5-89 °CDauwpunt vereist 2: -19-5 °CAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDetergent & surf.Other pharmaceutic ...

General SKU354T1032 MakeClima Temperatur Systeme LocationBarneveld CEcheck TypeC+10/350/S Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate box:Temperature Test Chambers: Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel General No.007020 Year of construction2000 Floorspace0,85x1,7 m Total height1,9 m Weight400 kg Extra SpecificationsTemp. range: 10-90 °CHumidity range: 10-95%rFDew point req. 1: 5-89 °CDew point req. 2: -19-5 °CAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDetergent & surf.Other pharmaceuticsCosmeti ...

General SKU079G409 MakeChaudronnerie Tuyauterie Rhone-Alsace Feyzin No.845 Year of construction1996 LocationBarneveld Pressure Working pressure6 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity11.000 Ltr Vessel sizesdia. 2400x1500mm Conical bottom(1500mm) Dished top sidecheck Manholedia. 500mm Top connections3x dia. 250mm Outletdia. 150mm Half coil jacketed(335 Ltr), Half coil in Duplex (1.4462) Max. temperature160 Degr. C. With paddle stirrercheck Motor15,0 KW, 220/380 Volt (Ex) Speed mixing shaftvariable With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4539 (904L) General Floorspace2,7x2,7 M Total height5,5 MAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrg ...

Hydraulic Llight guards 2 Knives, In very good conditions

MCS Jigger High Temperature 144ºC. Type COMBY-JIGGER JP70. Year 1982. It underwent a complete renovation in 2002 Pressure: 3kg/cm2 Capacity: 9170 l Roller width 2,000 mm. Diameter of fabric 1100 mm. Diameter of rollers 324 mm. Additives tank.

Model: 6219 - Type: Ridenocciolatrice - Year 2010 - 380 volts - Made in Italy - The Peach Repitter model 6219 feeds, aligns and repits the half-peaches containing whole pits or pit fragments, with a speed of up to 320 half-peaches per minute - The machine guarantees a high alignment efficiency and gentle product handling during the whole process - Reduction of the manpower. Thanks to the automatic alignment system and to the knives repitting device the half-peaches require a minimum working time - Superior quality level. The system assures a high alignment efficiency, guaranteeing a gentle product management during the whole working cycle - Low cost maintenance/Minimum downtime. Due to the simplicity of the design of this multiple lane knife pitter, high mechanical reliability is achieved, guaranteeing an extremely easy intervention - Electric engine 1,5 Kw  ...

table diameter: 5600 mm table load: 150 t table diameter: 3000 mm table turning speeds: 1 - 20 U/min table drive: 88 kW total power requirement: kW weight of the machine ca.: 79 t boring mill turntable - Table diameter 3000mm - Top plate up to 5600mm 1x table base Ø4550x1600mm, 28t 1x rotary table (top) Ø5600x730mm, 35t 1x rotary table (inside) Ø3000x300mm, 6t 1x gearbox 1850x1300x1250mm, 9t 1x drive 1600x1250x1600, 1.5t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CAVALLERI CT14 (the video was taken before and during reconditioning), Min/Max cutting length 250/1.500 mm. Max web width 1.250 mm. Max unwinder diameter 1.030 mm. n.2 unwinders available max reel weight per shaft 1.020 kg., pneumatic brakes on reel holders will be added before shipping, if requested by client., nominal max thickness 220-250 gr/sqm antistatic bar, photocell, sheet counter, all parameters are controlled by electronic control panel total dimensions LxW 2,2 x 4,8 mt. kg. 4.200, constructed in cast iron sound level under 85 Db encoder w/servo motor - power 18 kw, Construction year 2000 machine offered in good working conditions, check on [this video](youtu.be/867xqXH-bb0), availability: STOCK, conditions: reconditioned, type: CT 14, TEST POSSIBLE: YES

Kolbenpumpe und -kompressor für CTP Anlagen / Piston Pump and Compressor CTP Processor Thomas - Rietschle 2750BGHISS75 Baujahr / Year 2013 - Serial-No. 081300019158 für CTP Anlagen (Beispiel Agfa) / for CTP Processors (examplae Agfa) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP Plate Setter - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output speed: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Sturdy construction for prepress environments

CTM – Temperature-controlled 304 stainless steel tank on 110 hL feet This CTM stainless steel tank with a capacity of 110 hL is designed for the storage of liquids in wine, brewing, cider and dairy environments. Its configuration, combined with a vertical cylindrical tank on legs, a sloping bottom, a rectangular door at the bottom of the shell and a shell circuit thermoregulation, makes it a robust second-hand solution that can be used immediately to complete an existing winery capacity. Technical characteristics Brand: CTM Material: stainless steel Total capacity: 11,000 litres Temperature-controlled Conditions of use: atmospheric pressure Roof 1 central chimney Ferrule footbridge supports 1 rectangular door at the bottom of the ferrule 1 partial emptying 1 taster tap1 shell circuit tower at the bottom of the shell 2 shell circuit turns in the middle of the shell 1 ladder s ...

Electric vehicle for seniors or people with a walking disability. Versatile, powerful and ready to travel The Go Go® LX with CTS (Comfort-Trac suspension) brings a new level of performance to travel. With the CTS suspension front and rear, elegant style, easy disassembly and standard lighting, the Go Go® LX is the most modern travel product. Features: CTS (Comfort-Trac independent suspension front and rear) Feather-light disassembly allows easy separation of frames with just one hand Includes easily replaceable covers in red and blue Maximum stability thanks to the front frame-mounted seatpost Easy to disassemble into 5 parts for easy transport and stable storage Easy maintenance due to modular design Front-mounted basket included Separate charger (voltage switchable 110/220V) allows charging of the rechargeable battery pack Charging port in the control panel Technical ...

Electric vehicle for seniors or people with a walking disability. Versatile, powerful and ready to travel The Go Go® LX with CTS (Comfort-Trac suspension) brings a new level of performance to travel. With the CTS suspension front and rear, elegant style, easy disassembly and standard lighting, the Go Go® LX is the most modern travel product. Features: CTS (Comfort-Trac independent suspension front and rear) Feather-light disassembly allows easy separation of frames with just one hand Includes easily replaceable covers in red and blue Maximum stability thanks to the front frame-mounted seatpost Easy to disassemble into 5 parts for easy transport and stable storage Easy maintenance due to modular design Front-mounted basket included Separate charger (voltage switchable 110/220V) allows charging of the rechargeable battery pack Charging port in the control panel Technical ...

CTM – 304 stainless steel tank with domed bottom on 105 hL feet This CTM stainless steel tank with a capacity of 105 hL is designed for the storage of liquids in a wine-growing environment. Its configuration, combined with a vertical cylindrical tank closed on legs, a domed bottom and simple racking and control equipment, makes it a robust second-hand solution that can be immediately used to supplement an existing storage capacity. Technical data Brand: CTM Material: stainless steel Total capacity: 10,500 litres Conditions of use: atmospheric pressure Roof 1 chimney centred with hatch DN 500 mm Shell 1 ladder support bar 1 taster tap 1 oval autoclave door1 partial ball drain valve DN 50 Mâcon on square flange 100 x 100 stainless steel Domed bottom on legs 1 sludge dripper DN 80 Dimensions Diameter: 2200 mm Height: 3600 mm Equipment sold loaded on truck: disassembly and l ...

Control panel INDRAMAT, BOSCH-REXROTH CTA10-1 B-001-FW ( CTA101B001FW ) FWA-CTA10-T01-06VRS-EN Interfaces: RS232, RS485 Operating voltage: 24 V DC for front panel mounting: 185 x 110 mm New ! Dimensions ( Control Panel ): 203 x 143 x 40 mm Dimensions ( Package ): 440 x 210 x 70 mm

CTP System Creo Trendsetter VLF 5880; good condition; Video Die Cutter Hatchet OPU 200 VB Bj.2017; Observation Unit Mega Steel; Development machine Kodak THDX 165 Bj.2014; intermediate table; Outlet table. CTP System Creo Trendsetter VLF 5880; good condition; optical video punch Beil OPU 200 VB year 2017; control terminal Mega steel; processor Kodak THDX 165 year 2014; intermediate table; outfeed table.

Machine: Dainippon Screen PlateRite 4300S (2013) Type: 4-page Thermal CTP Platesetter Laser Technology: 32-channel infrared laser diode Maximum Plate Size: 830 x 660 mm (32.6 x 25.9) Minimum Plate Size: 324 x 370 mm (12.8 x 14.6) Plate Thickness: 0.15 to 0.3 mm (5.9 to 11.8 mil) Productivity: Up to 21 plates per hour (at 2,400 dpi) Resolutions: 1200, 2400, 2438, 2540, 4000 dpi Loading Configuration: Manual loading (optional auto-loader compatible) Dimensions (W x D x H): 1750 x 1030 x 1178 mm (68.9 x 40.6 x 46.4) Weight: Approx. 650 kg (1,430 lbs) Luxel T6300 CTP S Find more here - .ucymachines/ Contact us at - sales@ucymachines

CTP ECRM DPX 2 Exposure Technology Internal drum - Digital Polyester System Plattenbelichtungssystem / CTP ECRM DPX 2 Baujahr / Year 2008 - _Serial-No. 020203 Druckplattenformat / Plate Size min. 250 x 250mm - max. 460 x 550mm (upgrated) Belichtungsformat / Expose Size max. 436 x 546mm Auflösung / Resolution 900 - 2540 dpi Production Speed 2540dpi - 17 plates/hour; ECRM RIP Ripmate 4.X Harlequin Core Script-Works Plattenbelichtungssystem für Polyesterplatten Exposure Technology Internal drum - Digital Polyester System

CTP Computer to Plate Heidelberg Topsetter 102 Type 2310 CTP Computer to Plate Heidelberg Topsetter 102 Type 2310 Baujahr / Year 2001 - Serial-No. 013940157 Plate Format min. 370 × 323mm - max. 930 - 1140mm Plate thickness 0.15 - 0.40mm Up to 15 plates/h Auto loading Without RIP and Dongle. Up to 15 plates/h

GILDEMEISTER - CTX 310 V3 Stock number 1039-9126 CNC Turning and Milling Center Manufacturer: GILDEMEISTER Type CTX 310 V3 Year of construction 2003 Control 840 D Siemens Country of origin Italy Additional information: - Incl. 2x reducing tubes Technical details: Turning diameter 210 mm Turning length 580 mm Control 840 D Siemens Center height 190 mm Turning diameter over bed 330 mm Turning diameter above the face slide 260 mm Main spindle: Speed range - main spindle max. 4,000 rpm/-1 Drive power - main spindle 10 / 7.5 kW Max. torque 115 / 86 Nm Spindle bore 68.5 mm Usable rod diameter 51 mm C - Axis 0.001 ° Travels: Travel - x 185 mm Travel - z 455 mm Tool turret: Number of tool positions 12 pos. Tool holder VDI 30 Driven tool stations: 6 pos. Tailstock: Tailstock displacement 400 mm Suction pressure max. 4,000 N Feeds: Rapid traver ...

JCB 8026 CTS Mini Excavator – 2023 – 735 Hours – CW05 – High/Low Flow – 3 Buckets Specifications: Brand: JCB Type: 8026 CTS Year of construction: 2023 Model year: 2023 Chassis number: JCB08026EP3292249 Operating hours: 735 hours, read Motor power: 18.9 kW at 2,200 rpm Operating weight: 2,867 kg according to rating plate Spoon handle: 1,300 mm Track width: 250 mm Total width: approx. 1,550 mm Transport length: approx. 4,080 mm Transport height: approx. 2,400 mm Maximum digging depth: approx. 3,050 mm Maximum digging range: approx. 4,770 mm Features: CW05 Hydraulic Quick Coupler High-Flow Hydraulic Function Low-Flow Hydraulic Function Proportional hydraulic control on joysticks Additional hydraulic connections on the boom Wide bucket Backhoe Banana Bake 250 mm rubber tracks Hydraulic Dozer Blade Closed cab Suspension driver's seat Radio LED  ...

Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!

Fully automatic Thermal CTP exposure Heidelberg Suprasetter A 52; good condition; suitable for thermal printing plates; Meter reading 107.00 plates; Workflow Meta RIP and ZIP 3 output; integrated Auto Top Loader; Punch 425mm Autoplate; Suction for ablative printing plates; Transfer bridge; Washout G+J C 85; Printing plate forklift Grafoteam PST 26. Full automatic thermal plate setter Heidelberg Suprasetter A 52; good condition; used for thermal printing plates; counter only 107,000 plates; workflow Meta RIP with ZIP 3; auto plate loading system; punch 425mm autoplate; debris removal system; bridge; washing unit G+J C 85; plate stacker Grafoteam PST 26.

Agfa CTP with developer format 103x77, 64 diods, year 2008

All Rip and Software Included, 2400 dpi, Formats: Min. 324x660mm, Max. 370x830mm, PST 26 Compact Stacking Delivery, 16 Diods Laserhead, Infrarot 830nm thermal, chemical free thermal CTP with Autofeeding

Advantage N-SL 2010 CTP plate setter Advantage N-SL+ Plate developing machine VPP 68 +Nela fully automatic plate punching machine with video cont Find more here - .ucymachines/ Contact us at - sales@ucymachines

CTP Computer-to-Plate Imagesetter For Thermal Plates 830nm, 2xLaser Heads, Solution: 2400, 2540 dpi, Format: Max. 790x1030mm, Min. 370x323mm, Plate Thickness: 0.15-0.35mm, Speed: 23 Plates/Hour

Hydra Rig / NOV Offshore CTU Control Cabin Manufacturer: Hydra Rig / NOV Country of manufacture: United Kingdom Manufacturing date: 02/2020 Serial number: 15498001 Equipment type: Offshore Coiled Tubing Unit (CTU) Control Cabin Location: 84107 Bratislava Offshore control cabin designed for coiled tubing drilling and well-service operations. Equipped with an integrated operator control station, instrumentation and data acquisition equipment for monitoring and controlling CTU operations. Certification / classification: Offshore container construction: DNV 2.7-1 / BS EN 12079:2006 Hazardous-area suitability: Zone 2 Classification: II 3G IIA T3 Design temperature: -20°C Equipment: Coiled tubing operator control console Control levers and pressure gauges CTES / NOV Orion V hazardous-location data acquisition system Operator station HVAC system Internal lighti ...

CTP thermal plates 58000 plates hand feeding plate stacker Server Workstation TIFF shooter

CTP plate setter Advantage DL+ Plate developing machine VPP 68 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Flexo Laser FL- Piccolo (Xeikon) – flexo CTP year 2008 fiber laser 20W – 1.25 plates/h approx. 3,000 m2 exposed rotating external drum vacuum Digital Exposable Photopolymer Flexo Plates all thickness, all brands exposable size 635 x 762 mm Resolution 2540 dpi data format separated 1 bit tiff weight 500 kg good condition

Prepress machine model CTP Type: Suprasetter A52/A75, GEN III Manufacturer: Heidelberg Year: 2011 Complete with RIP and decommissioning SW Number of exposed plates: 113,000 Number of exposed m2: 46,000 RIP: Metadimension 10.01 Decommissioning: Prinect Signa Station 10.02 The imaging unit is in excellent condition with regular service and a low number of exposed plates Imcluded hand hole punch Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Presstec Model: Dimension Excel Year of Manufacture: 2005 Type of Machine : CTP Computer-to-Plate Setter Operating Hours: 23.693 Plates Included: - PAT Extraction Unit UF-02 / UF-270 A - Control Computer - Harlequin RIP Software Condition: Used Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Kodak Model: Magnus 400 II Year of Manufacture: 2010 Type of Machine : CTP System Electrical supply: 220 V, 50 Hz, 16 A Pneumatics: 6 Bar Certifications: CE, CSA (C/US) Condition: Used, good condition, Autoloader requires service on plate suction. Machine has been idle but remains connected to power supply. Complete System Included in the Sale Multi-Cassette Unit (MCU) U/G - Fully automatic with interleaved paper feeder, 4 die-cutting heads (Heidelberg) and 3 magazine drawers Magnus 400 II S - 6-sided thermal imagesetter Conveyor for Magnus 400 II - Plate transport unit Plateslider Magnus 400 - Transfer to plate stacker Stacker 860 - Stacker for receiving the imaged printing plate Agfa Azura C 95 Washout Unit - Ground drip tray included. Cleaned, ready for use, plus 4 new rollers. Find more here - .ucymachines/ Contact us at - sales@ucymachines

max. format 66 x 83 cm Year of construction 2008 Screen PT - R 4300 E CTP System for Thermal Plates 4 Sides Thermal Platesetter Autoloader Inline punching HD Autoplate / Bacher 425 mm Azura C 95 Processor Plate stackers Harlequin RIP Delivery date: Immediately

Ride-on scrubber dryer IPC CT110 BT70R, year of construction 2021, battery-powered (24V). - Compact industrial cleaner with single scrub brush and rear suction bar for simultaneous scrubbing and drying. Power supply: 24V battery Power: ± 1950 W Working width: ± 700 mm Rear suction bar with waste water recovery Self-propelled (ride-on). Adjustable water dosage and programs (Standard / Eco / Automatic) Auction-ID: A3-46133-21305

Ride-on scrubber dryer IPC CT230 BT100R SW, battery-powered (36V). - Equipped with pre-sweep system (side brush + sweeping function), double scrubbing brushes and a suction nozzle at the back for simultaneous cleaning and drying. Working width brushes: ± 1000 mm Suction width: ± 1280 mm Tank capacity: 205 L (clean) / 225 L (dirty) Drive: 36V battery (6x 6V) Productivity: up to approx. 7,500–9,000 m²/h Self-propelled, 3 cleaning programs, automatic water and suction control Auction-ID: A3-46133-21306

Manufacturer: GILDEMEISTER Model: CTX 400 Series 2 Year: 1998 German-made 2-axis CNC lathe, robust and precise, suitable for turning single parts and small to medium series. CNC : HEIDENHAIN TURN PLUS Axes: 2 axes (X, Z) Turning capacities: Diameter above bed: Ø 570 mm Diameter above carriage: Ø 420 mm X-axis stroke: 220 mm Z-axis stroke: 635 mm Spindle: Bore: 79 mm Chuck diameter: Ø 250 mm Spindle speed: 25 – 5000 rpm Motor power: 21 kW Fast feeds: X-axis: 20 m/min Z-axis: 24 m/min Turret: 12 positions VDI 30 Equipment: automatic tailstock (Ø 80 mm), chip conveyor, parts collector Country of origin: Germany Condition: used Auction-ID: A1-50714-4035

THIS GILDERMEISTER CTX 310 HAS ONLY MACHINED PLASTIC! Machine is equipped with: - chip conveyor - tail stock - C-axis 0,001° - live tooling (4500rpm) - Siemens ShopTurn Auction-ID: A1-50690-6

THIS GILDERMEISTER CTX 310 HAS ONLY MACHINED PLASTIC! Machine is equipped with: - chip conveyor - tail stock - C-axis 0,001° - live tooling (4500rpm) - Siemens ShopTurn Auction-ID: A1-50690-7

MICROM coverslip gluer CTM6; ; Untested equipment; ; Internal reference: FA-1469; Auction-ID: A1-50994-1154

CT25-PT-050MP BROADLEY JAMES CATHODE SET; ; Used between 10/02/2011 and 05/09/2012; ; Internal reference: FA-1036; Auction-ID: A1-50994-1184

Thermoplan coffee machine Brand: Thermoplan Model: BWONE-CTM-RF Serial No.: B1-097933 Power supply: Single phase (230V - 50Hz) Electrical power: 2.8 kW Dimensions (W x D x H): 350 x 600 x 780 mm Weight: 55 kg Aesthetic aspect: Very satisfactory Used equipment sold as is, not refurbished and untested. Vesto reference: V5527 Auction-ID: A1-50906-154

Checked and ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Machine complete with PC, RIP, etc.