ct 60 used for sale

3 pieces Systra module boxes in orange 22cm high, 60cm wide, 40cm deep Auction-ID: A1-46501-2782

Unused mini shovel fully electric, max speed 20km/h, lifting force 800kg, 2 driving speeds, 2 speeds for engines, working time approx. 4-5 hours, 220 volt charging plug, LED work lights all around, euro quick coupler for bucket and accessories, extra hydraulic connections for external use, incl excavator bucket Auction-ID: A1-40418-16

4 pieces chassis, assembly trolley, paint trolley 4 swivel castors 120 x 60cm on pallet Auction-ID: A1-46501-1637

4 pieces chassis, assembly trolley, paint trolley 4 swivel castors 120 x 60cm on pallet Auction-ID: A1-46501-1553

Stainless steel screw with drill tip and molded thread made of hardened steel Auction-ID: A1-46501-2174

Original Kanuk Turbo 2 workshop stove for carpentry etc. approx. 1.30m long x 0.60m wide x 1.10m high with blower with ash bucket, with air distribution pipe, with chimney connection technical data see nameplate under pictures good condition 2.5 years old Loading onto trucks and dismantling subject to a fee Auction-ID: A1-46501-2026

water pump with petrol engine, 80mm connections, capacity 60M3/hour, unused Auction-ID: A1-40418-507

This is a plot with approximately 60m2 of flat asbestos-free cement sheets dimensions: 250x110x0.6 cm Auction-ID: A1-40137-364

Compressor Schneider as good as new, only 47 and a half operating hours, only used at trade fairs no continuous operation Technical Specifications & Highlights Capacity: approx. 500 l/min suction capacity (approx. 350-400 l/min delivery volume). Pressure: Max. 10 bar. Container: 60 litres (horizontal, mobile). Drive: 400V three-phase (D-model) – provides a powerful start-up and is more efficient than 230V models. Speed: V-belt-driven 2-cylinder unit with low speed (smooth running, less wear). Auction-ID: A1-46501-271

Bosch professional (blue) L-Box GKF 600 Professional 220 Incl. various milling cutters in a set incl. various accessories see pictures Auction-ID: A1-46501-808

Equipped with: foil, swivel function, lift function, Max 1500kg lift capacity Auction-ID: A1-41995-100

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-3

Power: PTO-driven sprayer; diaphragm pump 75 L/min Operating parameters: Air velocity 38 m/s (137 km/h); fan Ø 712 mm; vertical spray reach up to 8 m; horizontal reach 4 m (each side); 14 nozzles Workpiece capacity: Main tank 2,000 L; rinsing tank 145 L; handwash tank 20 L; orchard & vineyard spraying Supported edges: Orchards, vineyards, tree crops Edge types: Air-assisted spraying; phytosanitary treatment Included equipment: Air conveyor turbine system; diaphragm pump 75 L/min; 14 spray nozzles; OM kit with 4 hand guns; pressure control system; safety valves; rubber couplings; hot-dip galvanized components Compliance: Agricultural sprayer equipment; safety pressure relief valves Power supply: Tractor PTO Year/Manufacturer: Mahindra – AIROTEC TURBO 2000 Remarks: Compact tank design with efficient air distribution; adjustable track width/height; designed for uni ...

Golf hook Allimex 6 box of 100 pieces Auction-ID: A1-46359-474

End clamp Allimex Allislide 6 boxes with 100 pieces Auction-ID: A1-46359-479

Pöttinger Lion 6002 C Power Harrow Working width approx. 6.0 m Heavy-duty professional rotary harrow for intensive tillage Suitable for high-performance tractors in arable farming Equipment: Hydraulically foldable (transport width approx. 3 m) Robust headstock (rear attachment) Large-dimensioned gearbox Tine field over entire working width Dozer Rail / Side Plates Walterscheid PTO Shaft Technology: PTO drive (540/1000 rpm depending on version) Several rotors with rotary harrow tines Intensive crumbling and seedbed preparation Uniform working depth due to stable construction Can be combined with seed drill technology (seed drill possible) Condition: Used, optically very good condition Auction-ID: A7-46606-1024

Grinding length: 800 mm Grinding width: 600 mm Grinding height: 500 mm Grinding wheel: 400 x max. 80 x 127 mm more data: see pictures Auction-ID: A1-46607-44

Mention : PLEASE NOTE ! Unchecked products .Unknown operation ! All itmes are sold as is . No complaints or claims will be accepted after purchase. The buyer is invited to view the lots before auction day ! Auction-ID: A7-46458-1032

Allimex Allislide Mid Clamp 6 boxes with 100 pieces Auction-ID: A1-46359-484

Roof hook Allimex Allislide 12 boxes with 50 pieces per box Auction-ID: A1-46359-454

Bednar Swifter SO 6000 Profi – Year 2024 – 6 m – New High-quality seedbed combination with 6 m working width Year of manufacture 2024 – New machine / unused Hydraulically foldable for transport Equipment: Chassis with transport axles Air brake system Front dozer rail Flat bar bender roller Crosskill double roller at the rear Gamma tine fields Technology: Optimal seedbed preparation in one operation Uniform reconsolidation High area performance Auction-ID: A7-46606-1009

Mention : PLEASE NOTE ! Unchecked products .Unknown operation ! All itmes are sold as is . No complaints or claims will be accepted after purchase. The buyer is invited to view the lots before auction day ! Auction-ID: A7-46458-1030

Specifications Manufacturer Siemens Model SGT-600DLE Year 2025 ( Complete overhaul ) Condition new Wattage 24,5 MW Hours 0 Frequency 50 Hz/ 60Hz Fuel Type Natural Gas Voltage 11000 KV Quantity N.1 Located EUROPE General Information - The turbine operates at 50Hz or 60hz . Timeframe for an additional power supply. - The turbine operates on natural gas - New core engine, 0 hours engine - Core engine is under warranty by Siemens - Low emissions and long maintenance intervals - Suitable for power generation and mechanical drives 2. Device specifications 1. Power output: 24,5 MW(e) 2. Fuel: Natural Gas. 3. Frequency: Dual 50/60Hz 4. Gross efficiency: 35.00% 5. Heat rate: 10,294 kJ/kWh (9,756 Btu/kWh) 6. Turbine speed: 9,500 rpm 7. Print ratio: 16.9:1 8. Exhaust mass flow: 40.0 kg/s (88.2 lb/s) 9. Exhaust gas temperature: 555°C (1,031° ...

NEW UNUSED MACHINE WITH DRIVEN TOOLING AND Y-AXIS! Specifications: Spindle: - Spindle hole diameter: 65mm - Bar capacity: 51mm - Chuck: 10” - Max spindle speed: 2600rpm Capacity: - Max. Swing diameter over bed: 600mm - Max. Turning diameter: 420mm - Max. Turning length: 550mm - X-axis: 280mm - Z-axis: 650mm - Y-axis: +/- 50mm - C-axis: yes Feedrate: - Rapid traverse X: 20m/min - Rapid traverse Z: 25m/min Turret: - Positions on turret: 12 - Driven tooling: yes - Tool shank: BMT-55 Tailstock: - Tailstock quill taper: MT-5 - Travel: 600mm Accuracy: - Positioning accuracy: 0.008mm - Repeated positioning accuracy: 0.008mm Machine is equipped with: - Chip conveyor - Tool setter - All tooling in turret included - Tailstock - Tooling as showed in pictures

Technical Specifications – Auto-Darkening Welding Helmet RL-600LB General Model: RL-600LB Helmet material: PP (polypropylene) ADF Filter: Auto Darkening Filter Filter Filter size: 135 x 131 x 10 mm Viewing window: 115 x 82 mm Optical class: 1/1/1/2 Nutrition Power source: Solar panel + polymer battery, rechargeable via USB-C Battery capacity display: Yes - Battery capacity test: Yes Lens power control: Automatic Eclipse Light mode: DIN 3.0 Dark mode: DIN 5-9 / DIN 9-13 Switching speed (light → dark): 0.08 ms Recovery time (dark → light): 0.1 – 1.0 s Protection UV and IR protection: Up to DIN 16, permanently active Temperature Operating temperature: -5°C to +55°C Storage temperature: -20°C to +70°C